| /* |
| * (C) Copyright 2008 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "imagetool.h" |
| #include <image.h> |
| #include "kwbimage.h" |
| |
| /* |
| * Supported commands for configuration file |
| */ |
| static table_entry_t kwbimage_cmds[] = { |
| {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, |
| {CMD_NAND_ECC_MODE, "NAND_ECC_MODE", "NAND mode", }, |
| {CMD_NAND_PAGE_SIZE, "NAND_PAGE_SIZE", "NAND size", }, |
| {CMD_SATA_PIO_MODE, "SATA_PIO_MODE", "SATA mode", }, |
| {CMD_DDR_INIT_DELAY, "DDR_INIT_DELAY", "DDR init dly", }, |
| {CMD_DATA, "DATA", "Reg Write Data", }, |
| {CMD_INVALID, "", "", }, |
| }; |
| |
| /* |
| * Supported Boot options for configuration file |
| */ |
| static table_entry_t kwbimage_bootops[] = { |
| {IBR_HDR_SPI_ID, "spi", "SPI Flash", }, |
| {IBR_HDR_NAND_ID, "nand", "NAND Flash", }, |
| {IBR_HDR_SATA_ID, "sata", "Sata port", }, |
| {IBR_HDR_PEX_ID, "pex", "PCIe port", }, |
| {IBR_HDR_UART_ID, "uart", "Serial port", }, |
| {-1, "", "Invalid", }, |
| }; |
| |
| /* |
| * Supported NAND ecc options configuration file |
| */ |
| static table_entry_t kwbimage_eccmodes[] = { |
| {IBR_HDR_ECC_DEFAULT, "default", "Default mode", }, |
| {IBR_HDR_ECC_FORCED_HAMMING, "hamming", "Hamming mode", }, |
| {IBR_HDR_ECC_FORCED_RS, "rs", "RS mode", }, |
| {IBR_HDR_ECC_DISABLED, "disabled", "ECC Disabled", }, |
| {-1, "", "", }, |
| }; |
| |
| static struct kwb_header kwbimage_header; |
| static int datacmd_cnt = 0; |
| static char * fname = "Unknown"; |
| static int lineno = -1; |
| |
| /* |
| * Report Error if xflag is set in addition to default |
| */ |
| static int kwbimage_check_params(struct image_tool_params *params) |
| { |
| if (!strlen (params->imagename)) { |
| printf ("Error:%s - Configuration file not specified, " |
| "it is needed for kwbimage generation\n", |
| params->cmdname); |
| return CFG_INVALID; |
| } |
| return ((params->dflag && (params->fflag || params->lflag)) || |
| (params->fflag && (params->dflag || params->lflag)) || |
| (params->lflag && (params->dflag || params->fflag)) || |
| (params->xflag) || !(strlen (params->imagename))); |
| } |
| |
| static uint32_t check_get_hexval (char *token) |
| { |
| uint32_t hexval; |
| |
| if (!sscanf (token, "%x", &hexval)) { |
| printf ("Error:%s[%d] - Invalid hex data(%s)\n", fname, |
| lineno, token); |
| exit (EXIT_FAILURE); |
| } |
| return hexval; |
| } |
| |
| /* |
| * Generates 8 bit checksum |
| */ |
| static uint8_t kwbimage_checksum8 (void *start, uint32_t len, uint8_t csum) |
| { |
| register uint8_t sum = csum; |
| volatile uint8_t *p = (volatile uint8_t *)start; |
| |
| /* check len and return zero checksum if invalid */ |
| if (!len) |
| return 0; |
| |
| do { |
| sum += *p; |
| p++; |
| } while (--len); |
| return (sum); |
| } |
| |
| /* |
| * Generates 32 bit checksum |
| */ |
| static uint32_t kwbimage_checksum32 (uint32_t *start, uint32_t len, uint32_t csum) |
| { |
| register uint32_t sum = csum; |
| volatile uint32_t *p = start; |
| |
| /* check len and return zero checksum if invalid */ |
| if (!len) |
| return 0; |
| |
| if (len % sizeof(uint32_t)) { |
| printf ("Error:%s[%d] - length is not in multiple of %zu\n", |
| __FUNCTION__, len, sizeof(uint32_t)); |
| return 0; |
| } |
| |
| do { |
| sum += *p; |
| p++; |
| len -= sizeof(uint32_t); |
| } while (len > 0); |
| return (sum); |
| } |
| |
| static void kwbimage_check_cfgdata (char *token, enum kwbimage_cmd cmdsw, |
| struct kwb_header *kwbhdr) |
| { |
| bhr_t *mhdr = &kwbhdr->kwb_hdr; |
| extbhr_t *exthdr = &kwbhdr->kwb_exthdr; |
| int i; |
| |
| switch (cmdsw) { |
| case CMD_BOOT_FROM: |
| i = get_table_entry_id (kwbimage_bootops, |
| "Kwbimage boot option", token); |
| |
| if (i < 0) |
| goto INVL_DATA; |
| |
| mhdr->blockid = i; |
| printf ("Preparing kirkwood boot image to boot " |
| "from %s\n", token); |
| break; |
| case CMD_NAND_ECC_MODE: |
| i = get_table_entry_id (kwbimage_eccmodes, |
| "NAND ecc mode", token); |
| |
| if (i < 0) |
| goto INVL_DATA; |
| |
| mhdr->nandeccmode = i; |
| printf ("Nand ECC mode = %s\n", token); |
| break; |
| case CMD_NAND_PAGE_SIZE: |
| mhdr->nandpagesize = |
| (uint16_t) check_get_hexval (token); |
| printf ("Nand page size = 0x%x\n", mhdr->nandpagesize); |
| break; |
| case CMD_SATA_PIO_MODE: |
| mhdr->satapiomode = |
| (uint8_t) check_get_hexval (token); |
| printf ("Sata PIO mode = 0x%x\n", |
| mhdr->satapiomode); |
| break; |
| case CMD_DDR_INIT_DELAY: |
| mhdr->ddrinitdelay = |
| (uint16_t) check_get_hexval (token); |
| printf ("DDR init delay = %d msec\n", mhdr->ddrinitdelay); |
| break; |
| case CMD_DATA: |
| exthdr->rcfg[datacmd_cnt].raddr = |
| check_get_hexval (token); |
| |
| break; |
| case CMD_INVALID: |
| goto INVL_DATA; |
| default: |
| goto INVL_DATA; |
| } |
| return; |
| |
| INVL_DATA: |
| printf ("Error:%s[%d] - Invalid data\n", fname, lineno); |
| exit (EXIT_FAILURE); |
| } |
| |
| /* |
| * this function sets the kwbimage header by- |
| * 1. Abstracting input command line arguments data |
| * 2. parses the kwbimage configuration file and update extebded header data |
| * 3. calculates header, extended header and image checksums |
| */ |
| static void kwdimage_set_ext_header (struct kwb_header *kwbhdr, char* name) { |
| bhr_t *mhdr = &kwbhdr->kwb_hdr; |
| extbhr_t *exthdr = &kwbhdr->kwb_exthdr; |
| FILE *fd = NULL; |
| int j; |
| char *line = NULL; |
| char * token, *saveptr1, *saveptr2; |
| size_t len = 0; |
| enum kwbimage_cmd cmd; |
| |
| fname = name; |
| /* set dram register offset */ |
| exthdr->dramregsoffs = (intptr_t)&exthdr->rcfg - (intptr_t)mhdr; |
| |
| if ((fd = fopen (name, "r")) == 0) { |
| printf ("Error:%s - Can't open\n", fname); |
| exit (EXIT_FAILURE); |
| } |
| |
| /* Simple kwimage.cfg file parser */ |
| lineno=0; |
| while ((getline (&line, &len, fd)) > 0) { |
| lineno++; |
| token = strtok_r (line, "\r\n", &saveptr1); |
| /* drop all lines with zero tokens (= empty lines) */ |
| if (token == NULL) |
| continue; |
| |
| for (j = 0, cmd = CMD_INVALID, line = token; ; line = NULL) { |
| token = strtok_r (line, " \t", &saveptr2); |
| if (token == NULL) |
| break; |
| /* Drop all text starting with '#' as comments */ |
| if (token[0] == '#') |
| break; |
| |
| /* Process rest as valid config command line */ |
| switch (j) { |
| case CFG_COMMAND: |
| cmd = get_table_entry_id (kwbimage_cmds, |
| "Kwbimage command", token); |
| |
| if (cmd == CMD_INVALID) |
| goto INVL_CMD; |
| break; |
| |
| case CFG_DATA0: |
| kwbimage_check_cfgdata (token, cmd, kwbhdr); |
| break; |
| |
| case CFG_DATA1: |
| if (cmd != CMD_DATA) |
| goto INVL_CMD; |
| |
| exthdr->rcfg[datacmd_cnt].rdata = |
| check_get_hexval (token); |
| |
| if (datacmd_cnt > KWBIMAGE_MAX_CONFIG ) { |
| printf ("Error:%s[%d] - Found more " |
| "than max(%zd) allowed " |
| "data configurations\n", |
| fname, lineno, |
| KWBIMAGE_MAX_CONFIG); |
| exit (EXIT_FAILURE); |
| } else |
| datacmd_cnt++; |
| break; |
| |
| default: |
| goto INVL_CMD; |
| } |
| j++; |
| } |
| } |
| if (line) |
| free (line); |
| |
| fclose (fd); |
| return; |
| |
| /* |
| * Invalid Command error reporring |
| * |
| * command CMD_DATA needs three strings on a line |
| * whereas other commands need only two. |
| * |
| * if more than two/three (as per command type) are observed, |
| * then error will be reported |
| */ |
| INVL_CMD: |
| printf ("Error:%s[%d] - Invalid command\n", fname, lineno); |
| exit (EXIT_FAILURE); |
| } |
| |
| static void kwbimage_set_header (void *ptr, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| struct kwb_header *hdr = (struct kwb_header *)ptr; |
| bhr_t *mhdr = &hdr->kwb_hdr; |
| extbhr_t *exthdr = &hdr->kwb_exthdr; |
| uint32_t checksum; |
| int size; |
| |
| /* Build and add image checksum header */ |
| checksum = kwbimage_checksum32 ((uint32_t *)ptr, sbuf->st_size, 0); |
| |
| size = write (ifd, &checksum, sizeof(uint32_t)); |
| if (size != sizeof(uint32_t)) { |
| printf ("Error:%s - Checksum write %d bytes %s\n", |
| params->cmdname, size, params->imagefile); |
| exit (EXIT_FAILURE); |
| } |
| |
| sbuf->st_size += sizeof(uint32_t); |
| |
| mhdr->blocksize = sbuf->st_size - sizeof(struct kwb_header); |
| mhdr->srcaddr = sizeof(struct kwb_header); |
| mhdr->destaddr= params->addr; |
| mhdr->execaddr =params->ep; |
| mhdr->ext = 0x1; /* header extension appended */ |
| |
| kwdimage_set_ext_header (hdr, params->imagename); |
| /* calculate checksums */ |
| mhdr->checkSum = kwbimage_checksum8 ((void *)mhdr, sizeof(bhr_t), 0); |
| exthdr->checkSum = kwbimage_checksum8 ((void *)exthdr, |
| sizeof(extbhr_t), 0); |
| } |
| |
| static int kwbimage_verify_header (unsigned char *ptr, int image_size, |
| struct image_tool_params *params) |
| { |
| struct kwb_header *hdr = (struct kwb_header *)ptr; |
| bhr_t *mhdr = &hdr->kwb_hdr; |
| extbhr_t *exthdr = &hdr->kwb_exthdr; |
| uint8_t calc_hdrcsum; |
| uint8_t calc_exthdrcsum; |
| |
| calc_hdrcsum = kwbimage_checksum8 ((void *)mhdr, |
| sizeof(bhr_t) - sizeof(uint8_t), 0); |
| if (calc_hdrcsum != mhdr->checkSum) |
| return -FDT_ERR_BADSTRUCTURE; /* mhdr csum not matched */ |
| |
| calc_exthdrcsum = kwbimage_checksum8 ((void *)exthdr, |
| sizeof(extbhr_t) - sizeof(uint8_t), 0); |
| if (calc_exthdrcsum != exthdr->checkSum) |
| return -FDT_ERR_BADSTRUCTURE; /* exthdr csum not matched */ |
| |
| return 0; |
| } |
| |
| static void kwbimage_print_header (const void *ptr) |
| { |
| struct kwb_header *hdr = (struct kwb_header *) ptr; |
| bhr_t *mhdr = &hdr->kwb_hdr; |
| char *name = get_table_entry_name (kwbimage_bootops, |
| "Kwbimage boot option", |
| (int) mhdr->blockid); |
| |
| printf ("Image Type: Kirkwood Boot from %s Image\n", name); |
| printf ("Data Size: "); |
| genimg_print_size (mhdr->blocksize - sizeof(uint32_t)); |
| printf ("Load Address: %08x\n", mhdr->destaddr); |
| printf ("Entry Point: %08x\n", mhdr->execaddr); |
| } |
| |
| static int kwbimage_check_image_types (uint8_t type) |
| { |
| if (type == IH_TYPE_KWBIMAGE) |
| return EXIT_SUCCESS; |
| else |
| return EXIT_FAILURE; |
| } |
| |
| /* |
| * kwbimage type parameters definition |
| */ |
| static struct image_type_params kwbimage_params = { |
| .name = "Kirkwood Boot Image support", |
| .header_size = sizeof(struct kwb_header), |
| .hdr = (void*)&kwbimage_header, |
| .check_image_type = kwbimage_check_image_types, |
| .verify_header = kwbimage_verify_header, |
| .print_header = kwbimage_print_header, |
| .set_header = kwbimage_set_header, |
| .check_params = kwbimage_check_params, |
| }; |
| |
| void init_kwb_image_type (void) |
| { |
| register_image_type(&kwbimage_params); |
| } |