| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * Modified 4/5/2001 |
| * Wait for completion of each sector erase command issued |
| * 4/5/2001 |
| * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com |
| */ |
| |
| #include <common.h> |
| #include <asm/ppc4xx.h> |
| #include <asm/processor.h> |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DEBUGF(x...) printf(x) |
| #else |
| #define DEBUGF(x...) |
| #endif /* DEBUG */ |
| |
| /* |
| * include common flash code (for amcc boards) |
| */ |
| #include "../common/flash.c" |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info); |
| static void flash_get_offsets(ulong base, flash_info_t * info); |
| |
| unsigned long flash_init(void) |
| { |
| unsigned long size_b0, size_b1; |
| int i; |
| uint pbcr; |
| unsigned long base_b0, base_b1; |
| |
| /* Init: no FLASHes known */ |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| /* Static FLASH Bank configuration here - FIXME XXX */ |
| |
| size_b0 = |
| flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); |
| |
| if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
| printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", |
| size_b0, size_b0 << 20); |
| } |
| |
| /* Only one bank */ |
| if (CONFIG_SYS_MAX_FLASH_BANKS == 1) { |
| /* Setup offsets */ |
| flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]); |
| |
| /* Monitor protection ON by default */ |
| (void)flash_protect(FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, |
| &flash_info[0]); |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[0]); |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, |
| CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[0]); |
| #endif |
| |
| size_b1 = 0; |
| flash_info[0].size = size_b0; |
| } |
| |
| /* 2 banks */ |
| else { |
| size_b1 = |
| flash_get_size((vu_long *) FLASH_BASE1_PRELIM, |
| &flash_info[1]); |
| |
| /* Re-do sizing to get full correct info */ |
| |
| if (size_b1) { |
| mtdcr(EBC0_CFGADDR, PB0CR); |
| pbcr = mfdcr(EBC0_CFGDATA); |
| mtdcr(EBC0_CFGADDR, PB0CR); |
| base_b1 = -size_b1; |
| pbcr = (pbcr & 0x0001ffff) | base_b1 | |
| (((size_b1 / 1024 / 1024) - 1) << 17); |
| mtdcr(EBC0_CFGDATA, pbcr); |
| /* printf("PB1CR = %x\n", pbcr); */ |
| } |
| |
| if (size_b0) { |
| mtdcr(EBC0_CFGADDR, PB1CR); |
| pbcr = mfdcr(EBC0_CFGDATA); |
| mtdcr(EBC0_CFGADDR, PB1CR); |
| base_b0 = base_b1 - size_b0; |
| pbcr = (pbcr & 0x0001ffff) | base_b0 | |
| (((size_b0 / 1024 / 1024) - 1) << 17); |
| mtdcr(EBC0_CFGDATA, pbcr); |
| /* printf("PB0CR = %x\n", pbcr); */ |
| } |
| |
| size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]); |
| |
| flash_get_offsets(base_b0, &flash_info[0]); |
| |
| /* monitor protection ON by default */ |
| (void)flash_protect(FLAG_PROTECT_SET, |
| base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN, |
| base_b0 + size_b0 - 1, &flash_info[0]); |
| /* Also protect sector containing initial power-up instruction */ |
| /* (flash_protect() checks address range - other call ignored) */ |
| (void)flash_protect(FLAG_PROTECT_SET, |
| 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]); |
| (void)flash_protect(FLAG_PROTECT_SET, |
| 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]); |
| |
| if (size_b1) { |
| /* Re-do sizing to get full correct info */ |
| size_b1 = |
| flash_get_size((vu_long *) base_b1, &flash_info[1]); |
| |
| flash_get_offsets(base_b1, &flash_info[1]); |
| |
| /* monitor protection ON by default */ |
| (void)flash_protect(FLAG_PROTECT_SET, |
| base_b1 + size_b1 - CONFIG_SYS_MONITOR_LEN, |
| base_b1 + size_b1 - 1, |
| &flash_info[1]); |
| /* monitor protection OFF by default (one is enough) */ |
| (void)flash_protect(FLAG_PROTECT_CLEAR, |
| base_b0 + size_b0 - CONFIG_SYS_MONITOR_LEN, |
| base_b0 + size_b0 - 1, |
| &flash_info[0]); |
| } else { |
| flash_info[1].flash_id = FLASH_UNKNOWN; |
| flash_info[1].sector_count = -1; |
| } |
| |
| flash_info[0].size = size_b0; |
| flash_info[1].size = size_b1; |
| } /* else 2 banks */ |
| return (size_b0 + size_b1); |
| } |
| |
| static void flash_get_offsets(ulong base, flash_info_t * info) |
| { |
| int i; |
| |
| /* set up sector start address table */ |
| if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || |
| (info->flash_id == FLASH_AM040)) { |
| for (i = 0; i < info->sector_count; i++) |
| info->start[i] = base + (i * 0x00010000); |
| } else { |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00004000; |
| info->start[2] = base + 0x00006000; |
| info->start[3] = base + 0x00008000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = |
| base + (i * 0x00010000) - 0x00030000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00004000; |
| info->start[i--] = base + info->size - 0x00006000; |
| info->start[i--] = base + info->size - 0x00008000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00010000; |
| } |
| } |
| } |
| } |