| #include "x86emu.h" |
| #include "glue.h" |
| |
| |
| /* |
| * This isn't nice, but there are a lot of incompatibilities in the U-Boot and scitech include |
| * files that this is the only really workable solution. |
| * Might be cleaned out later. |
| */ |
| |
| #ifdef DEBUG |
| #undef DEBUG |
| #endif |
| |
| #undef IO_LOGGING |
| #undef MEM_LOGGING |
| |
| #ifdef IO_LOGGING |
| #define LOGIO(port, format, args...) if (dolog(port)) _printf(format , ## args) |
| #else |
| #define LOGIO(port, format, args...) |
| #endif |
| |
| #ifdef MEM_LOGGIN |
| #define LOGMEM(format, args...) _printf(format , ## args) |
| #else |
| #define LOGMEM(format, args...) |
| #endif |
| |
| #ifdef DEBUG |
| #define PRINTF(format, args...) _printf(format , ## args) |
| #else |
| #define PRINTF(format, argc...) |
| #endif |
| |
| typedef unsigned char UBYTE; |
| typedef unsigned short UWORD; |
| typedef unsigned long ULONG; |
| |
| typedef char BYTE; |
| typedef short WORT; |
| typedef long LONG; |
| |
| #define EMULATOR_MEM_SIZE (1024*1024) |
| #define EMULATOR_BIOS_OFFSET 0xC0000 |
| #define EMULATOR_STRAP_OFFSET 0x30000 |
| #define EMULATOR_STACK_OFFSET 0x20000 |
| #define EMULATOR_LOGO_OFFSET 0x40000 // If you change this, change the strap code, too |
| #define VIDEO_BASE (void *)0xFD0B8000 |
| |
| extern char *getenv(char *); |
| extern int tstc(void); |
| extern int getc(void); |
| extern unsigned char video_get_attr(void); |
| |
| int atoi(char *string) |
| { |
| int res = 0; |
| while (*string>='0' && *string <='9') |
| { |
| res *= 10; |
| res += *string-'0'; |
| string++; |
| } |
| |
| return res; |
| } |
| |
| void cons_gets(char *buffer) |
| { |
| int i = 0; |
| char c = 0; |
| |
| buffer[0] = 0; |
| if (getenv("x86_runthru")) return; //FIXME: |
| while (c != 0x0D && c != 0x0A) |
| { |
| while (!tstc()); |
| c = getc(); |
| if (c>=32 && c < 127) |
| { |
| buffer[i] = c; |
| i++; |
| buffer[i] = 0; |
| putc(c); |
| } |
| else |
| { |
| if (c == 0x08) |
| { |
| if (i>0) i--; |
| buffer[i] = 0; |
| } |
| } |
| } |
| buffer[i] = '\n'; |
| buffer[i+1] = 0; |
| } |
| |
| char *bios_date = "08/14/02"; |
| UBYTE model = 0xFC; |
| UBYTE submodel = 0x00; |
| |
| static inline UBYTE read_byte(volatile UBYTE* from) |
| { |
| int x; |
| asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from)); |
| return (UBYTE)x; |
| } |
| |
| static inline void write_byte(volatile UBYTE *to, int x) |
| { |
| asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x)); |
| } |
| |
| static inline UWORD read_word_little(volatile UWORD *from) |
| { |
| int x; |
| asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from)); |
| return (UWORD)x; |
| } |
| |
| static inline UWORD read_word_big(volatile UWORD *from) |
| { |
| int x; |
| asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from)); |
| return (UWORD)x; |
| } |
| |
| static inline void write_word_little(volatile UWORD *to, int x) |
| { |
| asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to)); |
| } |
| |
| static inline void write_word_big(volatile UWORD *to, int x) |
| { |
| asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x)); |
| } |
| |
| static inline ULONG read_long_little(volatile ULONG *from) |
| { |
| unsigned long x; |
| asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from)); |
| return (ULONG)x; |
| } |
| |
| static inline ULONG read_long_big(volatile ULONG *from) |
| { |
| unsigned long x; |
| asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from)); |
| return (ULONG)x; |
| } |
| |
| static inline void write_long_little(volatile ULONG *to, ULONG x) |
| { |
| asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to)); |
| } |
| |
| static inline void write_long_big(volatile ULONG *to, ULONG x) |
| { |
| asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x)); |
| } |
| |
| static int log_init = 0; |
| static int log_do = 0; |
| static int log_low = 0; |
| |
| int dolog(int port) |
| { |
| if (log_init && log_do) |
| { |
| if (log_low && port > 0x400) return 0; |
| return 1; |
| } |
| |
| if (!log_init) |
| { |
| log_init = 1; |
| log_do = (getenv("x86_logio") != (char *)0); |
| log_low = (getenv("x86_loglow") != (char *)0); |
| if (log_do) |
| { |
| if (log_low && port > 0x400) return 0; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| // Converts an emulator address to a physical address. |
| // Handles all special cases (bios date, model etc), and might need work |
| u32 memaddr(u32 addr) |
| { |
| // if (addr >= 0xF0000 && addr < 0xFFFFF) printf("WARNING: Segment F access (0x%x)\n", addr); |
| // printf("MemAddr=%p\n", addr); |
| if (addr >= 0xA0000 && addr < 0xC0000) |
| return 0xFD000000 + addr; |
| else if (addr >= 0xFFFF5 && addr < 0xFFFFE) |
| { |
| return (u32)bios_date+addr-0xFFFF5; |
| } |
| else if (addr == 0xFFFFE) |
| return (u32)&model; |
| else if (addr == 0xFFFFF) |
| return (u32)&submodel; |
| else if (addr >= 0x80000000) |
| { |
| //printf("Warning: High memory access at 0x%x\n", addr); |
| return addr; |
| } |
| else |
| return (u32)M.mem_base+addr; |
| } |
| |
| u8 A1_rdb(u32 addr) |
| { |
| u8 a = read_byte((UBYTE *)memaddr(addr)); |
| LOGMEM("rdb: %x -> %x\n", addr, a); |
| return a; |
| } |
| |
| u16 A1_rdw(u32 addr) |
| { |
| u16 a = read_word_little((UWORD *)memaddr(addr)); |
| LOGMEM("rdw: %x -> %x\n", addr, a); |
| return a; |
| } |
| |
| u32 A1_rdl(u32 addr) |
| { |
| u32 a = read_long_little((ULONG *)memaddr(addr)); |
| LOGMEM("rdl: %x -> %x\n", addr, a); |
| return a; |
| } |
| |
| void A1_wrb(u32 addr, u8 val) |
| { |
| LOGMEM("wrb: %x <- %x\n", addr, val); |
| write_byte((UBYTE *)memaddr(addr), val); |
| } |
| |
| void A1_wrw(u32 addr, u16 val) |
| { |
| LOGMEM("wrw: %x <- %x\n", addr, val); |
| write_word_little((UWORD *)memaddr(addr), val); |
| } |
| |
| void A1_wrl(u32 addr, u32 val) |
| { |
| LOGMEM("wrl: %x <- %x\n", addr, val); |
| write_long_little((ULONG *)memaddr(addr), val); |
| } |
| |
| X86EMU_memFuncs _A1_mem = |
| { |
| A1_rdb, |
| A1_rdw, |
| A1_rdl, |
| A1_wrb, |
| A1_wrw, |
| A1_wrl, |
| }; |
| |
| #define ARTICIAS_PCI_CFGADDR 0xfec00cf8 |
| #define ARTICIAS_PCI_CFGDATA 0xfee00cfc |
| #define IOBASE 0xFE000000 |
| |
| #define in_byte(from) read_byte( (UBYTE *)port_to_mem(from)) |
| #define in_word(from) read_word_little((UWORD *)port_to_mem(from)) |
| #define in_long(from) read_long_little((ULONG *)port_to_mem(from)) |
| #define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val) |
| #define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val) |
| #define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val) |
| |
| u32 port_to_mem(int port) |
| { |
| if (port >= 0xCFC && port <= 0xCFF) return 0xFEE00000+port; |
| else if (port >= 0xCF8 && port <= 0xCFB) return 0xFEC00000+port; |
| else return IOBASE + port; |
| } |
| |
| u8 A1_inb(int port) |
| { |
| u8 a; |
| //if (port == 0x3BA) return 0; |
| a = in_byte(port); |
| LOGIO(port, "inb: %Xh -> %d (%Xh)\n", port, a, a); |
| return a; |
| } |
| |
| u16 A1_inw(int port) |
| { |
| u16 a = in_word(port); |
| LOGIO(port, "inw: %Xh -> %d (%Xh)\n", port, a, a); |
| return a; |
| } |
| |
| u32 A1_inl(int port) |
| { |
| u32 a = in_long(port); |
| LOGIO(port, "inl: %Xh -> %d (%Xh)\n", port, a, a); |
| return a; |
| } |
| |
| void A1_outb(int port, u8 val) |
| { |
| LOGIO(port, "outb: %Xh <- %d (%Xh)\n", port, val, val); |
| /* if (port == 0xCF8) port = 0xCFB; |
| else if (port == 0xCF9) port = 0xCFA; |
| else if (port == 0xCFA) port = 0xCF9; |
| else if (port == 0xCFB) port = 0xCF8;*/ |
| out_byte(port, val); |
| } |
| |
| void A1_outw(int port, u16 val) |
| { |
| LOGIO(port, "outw: %Xh <- %d (%Xh)\n", port, val, val); |
| out_word(port, val); |
| } |
| |
| void A1_outl(int port, u32 val) |
| { |
| LOGIO(port, "outl: %Xh <- %d (%Xh)\n", port, val, val); |
| out_long(port, val); |
| } |
| |
| X86EMU_pioFuncs _A1_pio = |
| { |
| A1_inb, |
| A1_inw, |
| A1_inl, |
| A1_outb, |
| A1_outw, |
| A1_outl, |
| }; |
| |
| static int reloced_ops = 0; |
| |
| void reloc_ops(void *reloc_addr) |
| { |
| extern void (*x86emu_optab[256])(u8); |
| extern void (*x86emu_optab2[256])(u8); |
| extern void tables_relocate(unsigned int offset); |
| int i; |
| unsigned long delta; |
| if (reloced_ops == 1) return; |
| reloced_ops = 1; |
| |
| delta = TEXT_BASE - (unsigned long)reloc_addr; |
| |
| for (i=0; i<256; i++) |
| { |
| x86emu_optab[i] -= delta; |
| x86emu_optab2[i] -= delta; |
| } |
| |
| _A1_mem.rdb = A1_rdb; |
| _A1_mem.rdw = A1_rdw; |
| _A1_mem.rdl = A1_rdl; |
| _A1_mem.wrb = A1_wrb; |
| _A1_mem.wrw = A1_wrw; |
| _A1_mem.wrl = A1_wrl; |
| |
| _A1_pio.inb = A1_inb; |
| _A1_pio.inw = A1_inw; |
| _A1_pio.inl = A1_inl; |
| _A1_pio.outb = A1_outb; |
| _A1_pio.outw = A1_outw; |
| _A1_pio.outl = A1_outl; |
| |
| tables_relocate(delta); |
| |
| } |
| |
| |
| #define ANY_KEY(text) \ |
| printf(text); \ |
| while (!tstc()); |
| |
| |
| unsigned char more_strap[] = { |
| 0xb4, 0x0, 0xb0, 0x2, 0xcd, 0x10, |
| }; |
| #define MORE_STRAP_BYTES 6 // Additional bytes of strap code |
| |
| |
| unsigned char *done_msg="VGA Initialized\0"; |
| |
| int execute_bios(pci_dev_t gr_dev, void *reloc_addr) |
| { |
| extern void bios_init(void); |
| extern void remove_init_data(void); |
| extern int video_rows(void); |
| extern int video_cols(void); |
| extern int video_size(int, int); |
| u8 *strap; |
| unsigned char *logo; |
| u8 cfg; |
| int i; |
| char c; |
| #ifdef DEBUG |
| char *s; |
| #endif |
| #ifdef EASTEREGG |
| int easteregg_active = 0; |
| #endif |
| char *pal_reset; |
| u8 *fb; |
| unsigned char *msg; |
| unsigned char current_attr; |
| |
| remove_init_data(); |
| PRINTF("Removed init data from cache, now in RAM\n"); |
| |
| reloc_ops(reloc_addr); |
| PRINTF("Attempting to run emulator on %02x:%02x:%02x\n", |
| PCI_BUS(gr_dev), PCI_DEV(gr_dev), PCI_FUNC(gr_dev)); |
| |
| // Enable compatibility hole for emulator access to frame buffer |
| PRINTF("Enabling compatibility hole\n"); |
| enable_compatibility_hole(); |
| |
| // Allocate memory |
| // FIXME: We shouldn't use this much memory really. |
| memset(&M, 0, sizeof(X86EMU_sysEnv)); |
| M.mem_base = malloc(EMULATOR_MEM_SIZE); |
| M.mem_size = EMULATOR_MEM_SIZE; |
| |
| if (!M.mem_base) |
| { |
| PRINTF("Unable to allocate one megabyte for emulator\n"); |
| return 0; |
| } |
| |
| if (attempt_map_rom(gr_dev, M.mem_base + EMULATOR_BIOS_OFFSET) == 0) |
| { |
| PRINTF("Error mapping rom. Emulation terminated\n"); |
| return 0; |
| } |
| |
| #ifdef DEBUG |
| s = getenv("x86_ask_start"); |
| if (s) |
| { |
| printf("Press 'q' to skip initialization, 'd' for dry init\n'i' for i/o session"); |
| while (!tstc()); |
| c = getc(); |
| if (c == 'q') return 0; |
| if (c == 'd') |
| { |
| extern void bios_set_mode(int mode); |
| bios_set_mode(0x03); |
| return 0; |
| } |
| if (c == 'i') do_inout(); |
| } |
| |
| |
| #endif |
| |
| #ifdef EASTEREGG |
| /* if (tstc()) |
| { |
| if (getc() == 'c') |
| { |
| easteregg_active = 1; |
| } |
| } |
| */ |
| if (getenv("easteregg")) |
| { |
| easteregg_active = 1; |
| } |
| |
| if (easteregg_active) |
| { |
| // Yay! |
| setenv("x86_mode", "1"); |
| setenv("vga_fg_color", "11"); |
| setenv("vga_bg_color", "1"); |
| easteregg_active = 1; |
| } |
| #endif |
| |
| strap = (u8*)M.mem_base + EMULATOR_STRAP_OFFSET; |
| |
| { |
| char *m = getenv("x86_mode"); |
| if (m) |
| { |
| more_strap[3] = atoi(m); |
| if (more_strap[3] == 1) video_size(40, 25); |
| else video_size(80, 25); |
| } |
| } |
| |
| /* |
| * Poke the strap routine. This might need a bit of extending |
| * if there is a mode switch involved, i.e. we want to int10 |
| * afterwards to set a different graphics mode, or alternatively |
| * there might be a different start address requirement if the |
| * ROM doesn't have an x86 image in its first image. |
| */ |
| |
| PRINTF("Poking strap...\n"); |
| |
| // FAR CALL c000:0003 |
| *strap++ = 0x9A; *strap++ = 0x03; *strap++ = 0x00; |
| *strap++ = 0x00; *strap++ = 0xC0; |
| |
| #if 1 |
| // insert additional strap code |
| for (i=0; i < MORE_STRAP_BYTES; i++) |
| { |
| *strap++ = more_strap[i]; |
| } |
| #endif |
| // HALT |
| *strap++ = 0xF4; |
| |
| PRINTF("Setting up logo data\n"); |
| logo = (unsigned char *)M.mem_base + EMULATOR_LOGO_OFFSET; |
| for (i=0; i<16; i++) |
| { |
| *logo++ = 0xFF; |
| } |
| |
| /* |
| * Setup the init parameters. |
| * Per PCI specs, AH must contain the bus and AL |
| * must contain the devfn, encoded as (dev<<3)|fn |
| */ |
| |
| // Execution starts here |
| M.x86.R_CS = SEG(EMULATOR_STRAP_OFFSET); |
| M.x86.R_IP = OFF(EMULATOR_STRAP_OFFSET); |
| |
| // Stack at top of ram |
| M.x86.R_SS = SEG(EMULATOR_STACK_OFFSET); |
| M.x86.R_SP = OFF(EMULATOR_STACK_OFFSET); |
| |
| // Input parameters |
| M.x86.R_AH = PCI_BUS(gr_dev); |
| M.x86.R_AL = (PCI_DEV(gr_dev)<<3) | PCI_FUNC(gr_dev); |
| |
| // Set the I/O and memory access functions |
| X86EMU_setupMemFuncs(&_A1_mem); |
| X86EMU_setupPioFuncs(&_A1_pio); |
| |
| // Enable timer 2 |
| cfg = in_byte(0x61); // Get Misc control |
| cfg |= 0x01; // Enable timer 2 |
| out_byte(0x61, cfg); // output again |
| |
| // Set up the timers |
| out_byte(0x43, 0x54); |
| out_byte(0x41, 0x18); |
| |
| out_byte(0x43, 0x36); |
| out_byte(0x40, 0x00); |
| out_byte(0x40, 0x00); |
| |
| out_byte(0x43, 0xb6); |
| out_byte(0x42, 0x31); |
| out_byte(0x42, 0x13); |
| |
| // Init the "BIOS". |
| bios_init(); |
| |
| // Video Card Reset |
| out_byte(0x3D8, 0); |
| out_byte(0x3B8, 1); |
| (void)in_byte(0x3BA); |
| (void)in_byte(0x3DA); |
| out_byte(0x3C0, 0); |
| out_byte(0x61, 0xFC); |
| |
| #ifdef DEBUG |
| s = _getenv("x86_singlestep"); |
| if (s && strcmp(s, "on")==0) |
| { |
| PRINTF("Enabling single stepping for debug\n"); |
| X86EMU_trace_on(); |
| } |
| #endif |
| |
| // Ready set go... |
| PRINTF("Running emulator\n"); |
| X86EMU_exec(); |
| PRINTF("Done running emulator\n"); |
| |
| /* FIXME: Remove me */ |
| pal_reset = getenv("x86_palette_reset"); |
| if (pal_reset && strcmp(pal_reset, "on") == 0) |
| { |
| PRINTF("Palette reset\n"); |
| //(void)in_byte(0x3da); |
| //out_byte(0x3c0, 0); |
| |
| out_byte(0x3C8, 0); |
| out_byte(0x3C9, 0); |
| out_byte(0x3C9, 0); |
| out_byte(0x3C9, 0); |
| for (i=0; i<254; i++) |
| { |
| out_byte(0x3C9, 63); |
| out_byte(0x3C9, 63); |
| out_byte(0x3C9, 63); |
| } |
| |
| out_byte(0x3c0, 0x20); |
| } |
| /* FIXME: remove me */ |
| #ifdef EASTEREGG |
| if (easteregg_active) |
| { |
| extern void video_easteregg(void); |
| video_easteregg(); |
| } |
| #endif |
| /* |
| current_attr = video_get_attr(); |
| fb = (u8 *)VIDEO_BASE; |
| for (i=0; i<video_rows()*video_cols()*2; i+=2) |
| { |
| *(fb+i) = ' '; |
| *(fb+i+1) = current_attr; |
| } |
| |
| fb = (u8 *)VIDEO_BASE + (video_rows())-1*(video_cols()*2); |
| for (i=0; i<video_cols(); i++) |
| { |
| *(fb + 2*i) = 32; |
| *(fb + 2*i + 1) = 0x17; |
| } |
| |
| msg = done_msg; |
| while (*msg) |
| { |
| *fb = *msg; |
| fb += 2; |
| msg ++; |
| } |
| */ |
| #ifdef DEBUG |
| if (getenv("x86_do_inout")) do_inout(); |
| #endif |
| |
| dcache_disable(); |
| return 1; |
| } |
| |
| // Clean up the x86 mess |
| void shutdown_bios(void) |
| { |
| // disable_compatibility_hole(); |
| // Free the memory associated |
| free(M.mem_base); |
| |
| } |
| |
| int to_int(char *buffer) |
| { |
| int base = 0; |
| int res = 0; |
| |
| if (*buffer == '$') |
| { |
| base = 16; |
| buffer++; |
| } |
| else base = 10; |
| |
| for (;;) |
| { |
| switch(*buffer) |
| { |
| case '0' ... '9': |
| res *= base; |
| res += *buffer - '0'; |
| break; |
| case 'A': |
| case 'a': |
| res *= base; |
| res += 10; |
| break; |
| case 'B': |
| case 'b': |
| res *= base; |
| res += 11; |
| break; |
| case 'C': |
| case 'c': |
| res *= base; |
| res += 12; |
| break; |
| case 'D': |
| case 'd': |
| res *= base; |
| res += 13; |
| break; |
| case 'E': |
| case 'e': |
| res *= base; |
| res += 14; |
| break; |
| case 'F': |
| case 'f': |
| res *= base; |
| res += 15; |
| break; |
| default: |
| return res; |
| } |
| buffer++; |
| } |
| return res; |
| } |
| |
| void one_arg(char *buffer, int *a) |
| { |
| while (*buffer && *buffer != '\n') |
| { |
| if (*buffer == ' ') buffer++; |
| else break; |
| } |
| |
| *a = to_int(buffer); |
| } |
| |
| void two_args(char *buffer, int *a, int *b) |
| { |
| while (*buffer && *buffer != '\n') |
| { |
| if (*buffer == ' ') buffer++; |
| else break; |
| } |
| |
| *a = to_int(buffer); |
| |
| while (*buffer && *buffer != '\n') |
| { |
| if (*buffer != ' ') buffer++; |
| else break; |
| } |
| |
| while (*buffer && *buffer != '\n') |
| { |
| if (*buffer == ' ') buffer++; |
| else break; |
| } |
| |
| *b = to_int(buffer); |
| } |
| |
| void do_inout(void) |
| { |
| char buffer[256]; |
| char *arg1, *arg2; |
| int a,b; |
| |
| printf("In/Out Session\nUse 'i[bwl]' for in, 'o[bwl]' for out and 'q' to quit\n"); |
| |
| do |
| { |
| cons_gets(buffer); |
| printf("\n"); |
| |
| *arg1 = buffer; |
| while (*arg1 != ' ' ) arg1++; |
| while (*arg1 == ' ') arg1++; |
| |
| if (buffer[0] == 'i') |
| { |
| one_arg(buffer+2, &a); |
| switch (buffer[1]) |
| { |
| case 'b': |
| printf("in_byte(%xh) = %xh\n", a, A1_inb(a)); |
| break; |
| case 'w': |
| printf("in_word(%xh) = %xh\n", a, A1_inw(a)); |
| break; |
| case 'l': |
| printf("in_dword(%xh) = %xh\n", a, A1_inl(a)); |
| break; |
| default: |
| printf("Invalid length '%c'\n", buffer[1]); |
| break; |
| } |
| } |
| else if (buffer[0] == 'o') |
| { |
| two_args(buffer+2, &a, &b); |
| switch (buffer[1]) |
| { |
| case 'b': |
| printf("out_byte(%d, %d)\n", a, b); |
| A1_outb(a,b); |
| break; |
| case 'w': |
| printf("out_word(%d, %d)\n", a, b); |
| A1_outw(a, b); |
| break; |
| case 'l': |
| printf("out_long(%d, %d)\n", a, b); |
| A1_outl(a, b); |
| break; |
| default: |
| printf("Invalid length '%c'\n", buffer[1]); |
| break; |
| } |
| } else if (buffer[0] == 'q') return; |
| } while (1); |
| } |