| /* |
| * Board specific setup info |
| * |
| * (C) Copyright 2005-2008 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * Derived from board/omap2420h4/platform.S |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <asm/arch/omap2420.h> |
| #include <asm/arch/mem.h> |
| #include <asm/arch/clocks.h> |
| |
| #define APOLLON_CS0_BASE 0x00000000 |
| |
| #ifdef PRCM_CONFIG_I |
| #define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907 |
| #define SDRC_ACTIM_CTRLB_0_VAL 0x00000013 |
| #define SDRC_RFR_CTRL_0_VAL 0x00044C01 |
| |
| /* GPMC */ |
| #define APOLLON_GPMC_CONFIG1_0 0xe30d1201 |
| #define APOLLON_GPMC_CONFIG2_0 0x000c1000 |
| #define APOLLON_GPMC_CONFIG3_0 0x00030400 |
| #define APOLLON_GPMC_CONFIG4_0 0x0B841006 |
| #define APOLLON_GPMC_CONFIG5_0 0x020F0C11 |
| #define APOLLON_GPMC_CONFIG6_0 0x00000000 |
| #define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24)) |
| |
| #elif defined(PRCM_CONFIG_II) |
| #define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485 |
| #define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C |
| #define SDRC_RFR_CTRL_0_VAL 0x00030001 |
| |
| /* GPMC */ |
| #define APOLLON_GPMC_CONFIG1_0 0xe30d1201 |
| #define APOLLON_GPMC_CONFIG2_0 0x00080E81 |
| #define APOLLON_GPMC_CONFIG3_0 0x00030400 |
| #define APOLLON_GPMC_CONFIG4_0 0x08041586 |
| #define APOLLON_GPMC_CONFIG5_0 0x020C090E |
| #define APOLLON_GPMC_CONFIG6_0 0x00000000 |
| #define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24)) |
| |
| #else |
| #error "Please configure PRCM schecm" |
| #endif |
| |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| mov r3, r0 /* save skip information */ |
| |
| /* Disable watchdog */ |
| ldr r0, =WD2_BASE |
| ldr r1, =WD_UNLOCK1 |
| str r1, [r0, #WSPR] |
| |
| ldr r1, =WD_UNLOCK2 |
| str r1, [r0, #WSPR] |
| |
| #ifdef DEBUG_LED |
| /* LED0 OFF */ |
| ldr r0, =0x480000E5 /* ball AA10, mode 3 */ |
| mov r1, #0x0b |
| strb r1, [r0] |
| #endif |
| |
| /* Pin muxing for SDRC */ |
| mov r1, #0x00 |
| ldr r0, =0x480000A1 /* ball C12, mode 0 */ |
| strb r1, [r0] |
| |
| ldr r0, =0x48000032 /* ball D11, mode 0 */ |
| strb r1, [r0] |
| |
| ldr r0, =0x480000A3 /* ball B13, mode 0 */ |
| strb r1, [r0] |
| |
| /* SDRC setting */ |
| ldr r0, =OMAP2420_SDRC_BASE |
| ldr r1, =0x00000010 |
| str r1, [r0, #0x10] |
| |
| ldr r1, =0x00000100 |
| str r1, [r0, #0x44] |
| |
| /* SDRC CS0 configuration */ |
| #ifdef CONFIG_APOLLON_PLUS |
| ldr r1, =0x01702011 |
| #else |
| ldr r1, =0x00d04011 |
| #endif |
| str r1, [r0, #0x80] |
| |
| ldr r1, =SDRC_ACTIM_CTRLA_0_VAL |
| str r1, [r0, #0x9C] |
| |
| ldr r1, =SDRC_ACTIM_CTRLB_0_VAL |
| str r1, [r0, #0xA0] |
| |
| ldr r1, =SDRC_RFR_CTRL_0_VAL |
| str r1, [r0, #0xA4] |
| |
| ldr r1, =0x00000041 |
| str r1, [r0, #0x70] |
| |
| /* Manual command sequence */ |
| ldr r1, =0x00000007 |
| str r1, [r0, #0xA8] |
| |
| ldr r1, =0x00000000 |
| str r1, [r0, #0xA8] |
| |
| ldr r1, =0x00000001 |
| str r1, [r0, #0xA8] |
| |
| ldr r1, =0x00000002 |
| str r1, [r0, #0xA8] |
| str r1, [r0, #0xA8] |
| |
| /* |
| * CS0 SDRC Mode register |
| * Burst length = 4 - DDR memory |
| * Serial mode |
| * CAS latency = 3 |
| */ |
| ldr r1, =0x00000032 |
| str r1, [r0, #0x84] |
| |
| /* Note: You MUST set EMR values */ |
| /* EMR1 & EMR2 */ |
| ldr r1, =0x00000000 |
| str r1, [r0, #0x88] |
| str r1, [r0, #0x8C] |
| |
| #ifdef OLD_SDRC_DLLA_CTRL |
| /* SDRC_DLLA_CTRL */ |
| ldr r1, =0x00007306 |
| str r1, [r0, #0x60] |
| |
| ldr r1, =0x00007303 |
| str r1, [r0, #0x60] |
| #else |
| /* SDRC_DLLA_CTRL */ |
| ldr r1, =0x00000506 |
| str r1, [r0, #0x60] |
| |
| ldr r1, =0x00000503 |
| str r1, [r0, #0x60] |
| #endif |
| |
| #ifdef __BROKEN_FEATURE__ |
| /* SDRC_DLLB_CTRL */ |
| ldr r1, =0x00000506 |
| str r1, [r0, #0x68] |
| |
| ldr r1, =0x00000503 |
| str r1, [r0, #0x68] |
| #endif |
| |
| /* little delay after init */ |
| mov r2, #0x1800 |
| 1: |
| subs r2, r2, #0x1 |
| bne 1b |
| |
| ldr sp, SRAM_STACK |
| str ip, [sp] /* stash old link register */ |
| mov ip, lr /* save link reg across call */ |
| mov r0, r3 /* pass skip info to s_init */ |
| |
| bl s_init /* go setup pll,mux,memory */ |
| |
| ldr ip, [sp] /* restore save ip */ |
| mov lr, ip /* restore link reg */ |
| |
| /* back to arch calling code */ |
| mov pc, lr |
| |
| /* the literal pools origin */ |
| .ltorg |
| |
| SRAM_STACK: |
| .word LOW_LEVEL_SRAM_STACK |