drivers/pinctrl/pinctrl-sti.c - github/trini/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Pinctrl driver for STMicroelectronics STi SoCs
  *
  * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
  * Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
  */

 #include <common.h>
 #include <bitfield.h>
 #include <dm.h>
 #include <errno.h>
 #include <regmap.h>
 #include <syscon.h>
 #include <asm/io.h>
 #include <dm/pinctrl.h>
 #include <linux/bug.h>
 #include <linux/libfdt.h>

 DECLARE_GLOBAL_DATA_PTR;

 #define MAX_STI_PINCONF_ENTRIES		7
 /* Output enable */
 #define OE			(1 << 27)
 /* Pull Up */
 #define PU			(1 << 26)
 /* Open Drain */
 #define OD			(1 << 25)

 /* User-frendly defines for Pin Direction */
 		/* oe = 0, pu = 0, od = 0 */
 #define IN			(0)
 		/* oe = 0, pu = 1, od = 0 */
 #define IN_PU			(PU)
 		/* oe = 1, pu = 0, od = 0 */
 #define OUT			(OE)
 		/* oe = 1, pu = 1, od = 0 */
 #define OUT_PU			(OE | PU)
 		/* oe = 1, pu = 0, od = 1 */
 #define BIDIR			(OE | OD)
 		/* oe = 1, pu = 1, od = 1 */
 #define BIDIR_PU		(OE | PU | OD)

 struct sti_pinctrl_platdata {
 	struct regmap *regmap;
 };

 struct sti_pin_desc {
 	unsigned char bank;
 	unsigned char pin;
 	unsigned char alt;
 	int dir;
 };

 /*
  * PIO alternative Function selector
  */
 void sti_alternate_select(struct udevice *dev, struct sti_pin_desc *pin_desc)
 {
 	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
 	unsigned long sysconf, *sysconfreg;
 	int alt = pin_desc->alt;
 	int bank = pin_desc->bank;
 	int pin = pin_desc->pin;

 	sysconfreg = (unsigned long *)plat->regmap->ranges[0].start;

 	switch (bank) {
 	case 0 ... 5:		/* in "SBC Bank" */
 		sysconfreg += bank;
 		break;
 	case 10 ... 20:		/* in "FRONT Bank" */
 		sysconfreg += bank - 10;
 		break;
 	case 30 ... 35:		/* in "REAR Bank" */
 		sysconfreg += bank - 30;
 		break;
 	case 40 ... 42:		/* in "FLASH Bank" */
 		sysconfreg += bank - 40;
 		break;
 	default:
 		BUG();
 		return;
 	}

 	sysconf = readl(sysconfreg);
 	sysconf = bitfield_replace(sysconf, pin * 4, 3, alt);
 	writel(sysconf, sysconfreg);
 }

 /* pin configuration */
 void sti_pin_configure(struct udevice *dev, struct sti_pin_desc *pin_desc)
 {
 	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
 	int bit;
 	int oe = 0, pu = 0, od = 0;
 	unsigned long *sysconfreg;
 	int bank = pin_desc->bank;

 	sysconfreg = (unsigned long *)plat->regmap->ranges[0].start + 40;

 	/*
 	 * NOTE: The PIO configuration for the PIO pins in the
 	 * "FLASH Bank" are different from all the other banks!
 	 * Specifically, the output-enable pin control register
 	 * (SYS_CFG_3040) and the pull-up pin control register
 	 * (SYS_CFG_3050), are both classed as being "reserved".
 	 * Hence, we do not write to these registers to configure
 	 * the OE and PU features for PIOs in this bank. However,
 	 * the open-drain pin control register (SYS_CFG_3060)
 	 * follows the style of the other banks, and so we can
 	 * treat that register normally.
 	 *
 	 * Being pedantic, we should configure the PU and PD features
 	 * in the "FLASH Bank" explicitly instead using the four
 	 * SYS_CFG registers: 3080, 3081, 3085, and 3086. However, this
 	 * would necessitate passing in the alternate function number
 	 * to this function, and adding some horrible complexity here.
 	 * Alternatively, we could just perform 4 32-bit "pokes" to
 	 * these four SYS_CFG registers early in the initialization.
 	 * In practice, these four SYS_CFG registers are correct
 	 * after a reset, and U-Boot does not need to change them, so
 	 * we (cheat and) rely on these registers being correct.
 	 * WARNING: Please be aware of this (pragmatic) behaviour!
 	 */
 	int flashss = 0;	/* bool: PIO in the Flash Sub-System ? */

 	switch (pin_desc->dir) {
 	case IN:
 		oe = 0; pu = 0; od = 0;
 		break;
 	case IN_PU:
 		oe = 0; pu = 1; od = 0;
 		break;
 	case OUT:
 		oe = 1; pu = 0; od = 0;
 		break;
 	case BIDIR:
 		oe = 1; pu = 0; od = 1;
 		break;
 	case BIDIR_PU:
 		oe = 1; pu = 1; od = 1;
 		break;

 	default:
 		pr_err("%s invalid direction value: 0x%x\n",
 		      __func__, pin_desc->dir);
 		BUG();
 		break;
 	}

 	switch (bank) {
 	case 0 ... 5:		/* in "SBC Bank" */
 		sysconfreg += bank / 4;
 		break;
 	case 10 ... 20:		/* in "FRONT Bank" */
 		bank -= 10;
 		sysconfreg += bank / 4;
 		break;
 	case 30 ... 35:		/* in "REAR Bank" */
 		bank -= 30;
 		sysconfreg += bank / 4;
 		break;
 	case 40 ... 42:		/* in "FLASH Bank" */
 		bank -= 40;
 		sysconfreg += bank / 4;
 		flashss = 1;	/* pin is in the Flash Sub-System */
 		break;
 	default:
 		BUG();
 		return;
 	}

 	bit = ((bank * 8) + pin_desc->pin) % 32;

 	/*
 	 * set the "Output Enable" pin control
 	 * but, do nothing if in the flashSS
 	 */
 	if (!flashss) {
 		if (oe)
 			generic_set_bit(bit, sysconfreg);
 		else
 			generic_clear_bit(bit, sysconfreg);
 	}

 	sysconfreg += 10;	/* skip to next set of syscfg registers */

 	/*
 	 * set the "Pull Up" pin control
 	 * but, do nothing if in the FlashSS
 	 */

 	if (!flashss) {
 		if (pu)
 			generic_set_bit(bit, sysconfreg);
 		else
 			generic_clear_bit(bit, sysconfreg);
 	}

 	sysconfreg += 10;	/* skip to next set of syscfg registers */

 	/* set the "Open Drain Enable" pin control */
 	if (od)
 		generic_set_bit(bit, sysconfreg);
 	else
 		generic_clear_bit(bit, sysconfreg);
 }


 static int sti_pinctrl_set_state(struct udevice *dev, struct udevice *config)
 {
 	struct fdtdec_phandle_args args;
 	const void *blob = gd->fdt_blob;
 	const char *prop_name;
 	int node = dev_of_offset(config);
 	int property_offset, prop_len;
 	int pinconf_node, ret, count;
 	const char *bank_name;
 	u32 cells[MAX_STI_PINCONF_ENTRIES];

 	struct sti_pin_desc pin_desc;

 	/* go to next node "st,pins" which contains the pins configuration */
 	pinconf_node = fdt_subnode_offset(blob, node, "st,pins");

 	/*
 	 * parse each pins configuration which looks like :
 	 *	pin_name = <bank_phandle pin_nb alt dir rt_type rt_delay rt_clk>
 	 */

 	fdt_for_each_property_offset(property_offset, blob, pinconf_node) {
 		fdt_getprop_by_offset(blob, property_offset, &prop_name,
 				      &prop_len);

 		/* extract the bank of the pin description */
 		ret = fdtdec_parse_phandle_with_args(blob, pinconf_node,
 						     prop_name, "#gpio-cells",
 						     0, 0, &args);
 		if (ret < 0) {
 			pr_err("Can't get the gpio bank phandle: %d\n", ret);
 			return ret;
 		}

 		bank_name = fdt_getprop(blob, args.node, "st,bank-name",
 					&count);
 		if (count < 0) {
 			pr_err("Can't find bank-name property %d\n", count);
 			return -EINVAL;
 		}

 		pin_desc.bank = trailing_strtoln(bank_name, NULL);

 		count = fdtdec_get_int_array_count(blob, pinconf_node,
 						   prop_name, cells,
 						   ARRAY_SIZE(cells));
 		if (count < 0) {
 			pr_err("Bad pin configuration array %d\n", count);
 			return -EINVAL;
 		}

 		if (count > MAX_STI_PINCONF_ENTRIES) {
 			pr_err("Unsupported pinconf array count %d\n", count);
 			return -EINVAL;
 		}

 		pin_desc.pin = cells[1];
 		pin_desc.alt = cells[2];
 		pin_desc.dir = cells[3];

 		sti_alternate_select(dev, &pin_desc);
 		sti_pin_configure(dev, &pin_desc);
 	};

 	return 0;
 }

 static int sti_pinctrl_probe(struct udevice *dev)
 {
 	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
 	struct udevice *syscon;
 	int err;

 	/* get corresponding syscon phandle */
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   "st,syscfg", &syscon);
 	if (err) {
 		pr_err("unable to find syscon device\n");
 		return err;
 	}

 	plat->regmap = syscon_get_regmap(syscon);
 	if (!plat->regmap) {
 		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}

 	return 0;
 }

 static const struct udevice_id sti_pinctrl_ids[] = {
 	{ .compatible = "st,stih407-sbc-pinctrl" },
 	{ .compatible = "st,stih407-front-pinctrl" },
 	{ .compatible = "st,stih407-rear-pinctrl" },
 	{ .compatible = "st,stih407-flash-pinctrl" },
 	{ }
 };

 const struct pinctrl_ops sti_pinctrl_ops = {
 	.set_state = sti_pinctrl_set_state,
 };

 U_BOOT_DRIVER(pinctrl_sti) = {
 	.name = "pinctrl_sti",
 	.id = UCLASS_PINCTRL,
 	.of_match = sti_pinctrl_ids,
 	.ops = &sti_pinctrl_ops,
 	.probe = sti_pinctrl_probe,
 	.plat_auto	= sizeof(struct sti_pinctrl_platdata),
 	.ops = &sti_pinctrl_ops,
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Pinctrl driver for STMicroelectronics STi SoCs
	*
	* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
	* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
	*/

	#include <common.h>
	#include <bitfield.h>
	#include <dm.h>
	#include <errno.h>
	#include <regmap.h>
	#include <syscon.h>
	#include <asm/io.h>
	#include <dm/pinctrl.h>
	#include <linux/bug.h>
	#include <linux/libfdt.h>

	DECLARE_GLOBAL_DATA_PTR;

	#define MAX_STI_PINCONF_ENTRIES 7
	/* Output enable */
	#define OE (1 << 27)
	/* Pull Up */
	#define PU (1 << 26)
	/* Open Drain */
	#define OD (1 << 25)

	/* User-frendly defines for Pin Direction */
	/* oe = 0, pu = 0, od = 0 */
	#define IN (0)
	/* oe = 0, pu = 1, od = 0 */
	#define IN_PU (PU)
	/* oe = 1, pu = 0, od = 0 */
	#define OUT (OE)
	/* oe = 1, pu = 1, od = 0 */
	#define OUT_PU (OE \| PU)
	/* oe = 1, pu = 0, od = 1 */
	#define BIDIR (OE \| OD)
	/* oe = 1, pu = 1, od = 1 */
	#define BIDIR_PU (OE \| PU \| OD)

	struct sti_pinctrl_platdata {
	struct regmap *regmap;
	};

	struct sti_pin_desc {
	unsigned char bank;
	unsigned char pin;
	unsigned char alt;
	int dir;
	};

	/*
	* PIO alternative Function selector
	*/
	void sti_alternate_select(struct udevice dev, struct sti_pin_desc pin_desc)
	{
	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
	unsigned long sysconf, *sysconfreg;
	int alt = pin_desc->alt;
	int bank = pin_desc->bank;
	int pin = pin_desc->pin;

	sysconfreg = (unsigned long *)plat->regmap->ranges[0].start;

	switch (bank) {
	case 0 ... 5: /* in "SBC Bank" */
	sysconfreg += bank;
	break;
	case 10 ... 20: /* in "FRONT Bank" */
	sysconfreg += bank - 10;
	break;
	case 30 ... 35: /* in "REAR Bank" */
	sysconfreg += bank - 30;
	break;
	case 40 ... 42: /* in "FLASH Bank" */
	sysconfreg += bank - 40;
	break;
	default:
	BUG();
	return;
	}

	sysconf = readl(sysconfreg);
	sysconf = bitfield_replace(sysconf, pin * 4, 3, alt);
	writel(sysconf, sysconfreg);
	}

	/* pin configuration */
	void sti_pin_configure(struct udevice dev, struct sti_pin_desc pin_desc)
	{
	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
	int bit;
	int oe = 0, pu = 0, od = 0;
	unsigned long *sysconfreg;
	int bank = pin_desc->bank;

	sysconfreg = (unsigned long *)plat->regmap->ranges[0].start + 40;

	/*
	* NOTE: The PIO configuration for the PIO pins in the
	* "FLASH Bank" are different from all the other banks!
	* Specifically, the output-enable pin control register
	* (SYS_CFG_3040) and the pull-up pin control register
	* (SYS_CFG_3050), are both classed as being "reserved".
	* Hence, we do not write to these registers to configure
	* the OE and PU features for PIOs in this bank. However,
	* the open-drain pin control register (SYS_CFG_3060)
	* follows the style of the other banks, and so we can
	* treat that register normally.
	*
	* Being pedantic, we should configure the PU and PD features
	* in the "FLASH Bank" explicitly instead using the four
	* SYS_CFG registers: 3080, 3081, 3085, and 3086. However, this
	* would necessitate passing in the alternate function number
	* to this function, and adding some horrible complexity here.
	* Alternatively, we could just perform 4 32-bit "pokes" to
	* these four SYS_CFG registers early in the initialization.
	* In practice, these four SYS_CFG registers are correct
	* after a reset, and U-Boot does not need to change them, so
	* we (cheat and) rely on these registers being correct.
	* WARNING: Please be aware of this (pragmatic) behaviour!
	*/
	int flashss = 0; /* bool: PIO in the Flash Sub-System ? */

	switch (pin_desc->dir) {
	case IN:
	oe = 0; pu = 0; od = 0;
	break;
	case IN_PU:
	oe = 0; pu = 1; od = 0;
	break;
	case OUT:
	oe = 1; pu = 0; od = 0;
	break;
	case BIDIR:
	oe = 1; pu = 0; od = 1;
	break;
	case BIDIR_PU:
	oe = 1; pu = 1; od = 1;
	break;

	default:
	pr_err("%s invalid direction value: 0x%x\n",
	__func__, pin_desc->dir);
	BUG();
	break;
	}

	switch (bank) {
	case 0 ... 5: /* in "SBC Bank" */
	sysconfreg += bank / 4;
	break;
	case 10 ... 20: /* in "FRONT Bank" */
	bank -= 10;
	sysconfreg += bank / 4;
	break;
	case 30 ... 35: /* in "REAR Bank" */
	bank -= 30;
	sysconfreg += bank / 4;
	break;
	case 40 ... 42: /* in "FLASH Bank" */
	bank -= 40;
	sysconfreg += bank / 4;
	flashss = 1; /* pin is in the Flash Sub-System */
	break;
	default:
	BUG();
	return;
	}

	bit = ((bank * 8) + pin_desc->pin) % 32;

	/*
	* set the "Output Enable" pin control
	* but, do nothing if in the flashSS
	*/
	if (!flashss) {
	if (oe)
	generic_set_bit(bit, sysconfreg);
	else
	generic_clear_bit(bit, sysconfreg);
	}

	sysconfreg += 10; /* skip to next set of syscfg registers */

	/*
	* set the "Pull Up" pin control
	* but, do nothing if in the FlashSS
	*/

	if (!flashss) {
	if (pu)
	generic_set_bit(bit, sysconfreg);
	else
	generic_clear_bit(bit, sysconfreg);
	}

	sysconfreg += 10; /* skip to next set of syscfg registers */

	/* set the "Open Drain Enable" pin control */
	if (od)
	generic_set_bit(bit, sysconfreg);
	else
	generic_clear_bit(bit, sysconfreg);
	}


	static int sti_pinctrl_set_state(struct udevice dev, struct udevice config)
	{
	struct fdtdec_phandle_args args;
	const void *blob = gd->fdt_blob;
	const char *prop_name;
	int node = dev_of_offset(config);
	int property_offset, prop_len;
	int pinconf_node, ret, count;
	const char *bank_name;
	u32 cells[MAX_STI_PINCONF_ENTRIES];

	struct sti_pin_desc pin_desc;

	/* go to next node "st,pins" which contains the pins configuration */
	pinconf_node = fdt_subnode_offset(blob, node, "st,pins");

	/*
	* parse each pins configuration which looks like :
	* pin_name = <bank_phandle pin_nb alt dir rt_type rt_delay rt_clk>
	*/

	fdt_for_each_property_offset(property_offset, blob, pinconf_node) {
	fdt_getprop_by_offset(blob, property_offset, &prop_name,
	&prop_len);

	/* extract the bank of the pin description */
	ret = fdtdec_parse_phandle_with_args(blob, pinconf_node,
	prop_name, "#gpio-cells",
	0, 0, &args);
	if (ret < 0) {
	pr_err("Can't get the gpio bank phandle: %d\n", ret);
	return ret;
	}

	bank_name = fdt_getprop(blob, args.node, "st,bank-name",
	&count);
	if (count < 0) {
	pr_err("Can't find bank-name property %d\n", count);
	return -EINVAL;
	}

	pin_desc.bank = trailing_strtoln(bank_name, NULL);

	count = fdtdec_get_int_array_count(blob, pinconf_node,
	prop_name, cells,
	ARRAY_SIZE(cells));
	if (count < 0) {
	pr_err("Bad pin configuration array %d\n", count);
	return -EINVAL;
	}

	if (count > MAX_STI_PINCONF_ENTRIES) {
	pr_err("Unsupported pinconf array count %d\n", count);
	return -EINVAL;
	}

	pin_desc.pin = cells[1];
	pin_desc.alt = cells[2];
	pin_desc.dir = cells[3];

	sti_alternate_select(dev, &pin_desc);
	sti_pin_configure(dev, &pin_desc);
	};

	return 0;
	}

	static int sti_pinctrl_probe(struct udevice *dev)
	{
	struct sti_pinctrl_platdata *plat = dev_get_plat(dev);
	struct udevice *syscon;
	int err;

	/* get corresponding syscon phandle */
	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
	"st,syscfg", &syscon);
	if (err) {
	pr_err("unable to find syscon device\n");
	return err;
	}

	plat->regmap = syscon_get_regmap(syscon);
	if (!plat->regmap) {
	pr_err("unable to find regmap\n");
	return -ENODEV;
	}

	return 0;
	}

	static const struct udevice_id sti_pinctrl_ids[] = {
	{ .compatible = "st,stih407-sbc-pinctrl" },
	{ .compatible = "st,stih407-front-pinctrl" },
	{ .compatible = "st,stih407-rear-pinctrl" },
	{ .compatible = "st,stih407-flash-pinctrl" },
	{ }
	};

	const struct pinctrl_ops sti_pinctrl_ops = {
	.set_state = sti_pinctrl_set_state,
	};

	U_BOOT_DRIVER(pinctrl_sti) = {
	.name = "pinctrl_sti",
	.id = UCLASS_PINCTRL,
	.of_match = sti_pinctrl_ids,
	.ops = &sti_pinctrl_ops,
	.probe = sti_pinctrl_probe,
	.plat_auto = sizeof(struct sti_pinctrl_platdata),
	.ops = &sti_pinctrl_ops,
	};