| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2015 Freescale Semiconductor |
| * Copyright 2019-2021 NXP |
| */ |
| |
| #ifndef __LS1043A_COMMON_H |
| #define __LS1043A_COMMON_H |
| |
| /* SPL build */ |
| #ifdef CONFIG_SPL_BUILD |
| #define SPL_NO_FMAN |
| #define SPL_NO_DSPI |
| #define SPL_NO_PCIE |
| #define SPL_NO_ENV |
| #define SPL_NO_MISC |
| #define SPL_NO_USB |
| #define SPL_NO_SATA |
| #define SPL_NO_QE |
| #define SPL_NO_EEPROM |
| #endif |
| #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) |
| #define SPL_NO_MMC |
| #endif |
| #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) |
| #define SPL_NO_IFC |
| #endif |
| |
| #include <asm/arch/stream_id_lsch2.h> |
| #include <asm/arch/config.h> |
| |
| /* Link Definitions */ |
| |
| #define CONFIG_VERY_BIG_RAM |
| #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 |
| #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL |
| |
| #define CPU_RELEASE_ADDR secondary_boot_addr |
| |
| /* Serial Port */ |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) |
| |
| /* SD boot SPL */ |
| #ifdef CONFIG_SD_BOOT |
| #ifdef CONFIG_NXP_ESBC |
| #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) |
| /* |
| * HDR would be appended at end of image and copied to DDR along |
| * with U-Boot image. Here u-boot max. size is 512K. So if binary |
| * size increases then increase this size in case of secure boot as |
| * it uses raw u-boot image instead of fit image. |
| */ |
| #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) |
| #else |
| #define CONFIG_SYS_MONITOR_LEN 0x100000 |
| #endif /* ifdef CONFIG_NXP_ESBC */ |
| #endif |
| |
| /* NAND SPL */ |
| #ifdef CONFIG_NAND_BOOT |
| #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE |
| #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE |
| |
| #ifdef CONFIG_NXP_ESBC |
| #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) |
| #endif /* ifdef CONFIG_NXP_ESBC */ |
| |
| #ifdef CONFIG_U_BOOT_HDR_SIZE |
| /* |
| * HDR would be appended at end of image and copied to DDR along |
| * with U-Boot image. Here u-boot max. size is 512K. So if binary |
| * size increases then increase this size in case of secure boot as |
| * it uses raw u-boot image instead of fit image. |
| */ |
| #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) |
| #else |
| #define CONFIG_SYS_MONITOR_LEN 0x100000 |
| #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ |
| |
| #endif |
| |
| /* GPIO */ |
| |
| /* IFC */ |
| #ifndef SPL_NO_IFC |
| #if defined(CONFIG_TFABOOT) || \ |
| (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) |
| /* |
| * CONFIG_SYS_FLASH_BASE has the final address (core view) |
| * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) |
| * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address |
| * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting |
| */ |
| #define CONFIG_SYS_FLASH_BASE 0x60000000 |
| #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 |
| |
| #ifdef CONFIG_MTD_NOR_FLASH |
| #define CONFIG_SYS_FLASH_QUIET_TEST |
| #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| #endif |
| #endif |
| #endif |
| |
| /* I2C */ |
| |
| /* DSPI */ |
| |
| /* FMan ucode */ |
| #ifndef SPL_NO_FMAN |
| #define CONFIG_SYS_DPAA_FMAN |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 |
| |
| #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) |
| #endif |
| #endif |
| |
| /* Miscellaneous configurable options */ |
| |
| #define CONFIG_HWCONFIG |
| #define HWCONFIG_BUFFER_SIZE 128 |
| |
| #ifndef SPL_NO_MISC |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 0) \ |
| func(USB, usb, 0) \ |
| func(DHCP, dhcp, na) |
| #include <config_distro_bootcmd.h> |
| |
| /* Initial environment variables */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "hwconfig=fsl_ddr:bank_intlv=auto\0" \ |
| "fdt_high=0xffffffffffffffff\0" \ |
| "initrd_high=0xffffffffffffffff\0" \ |
| "kernel_addr=0x61000000\0" \ |
| "scriptaddr=0x80000000\0" \ |
| "scripthdraddr=0x80080000\0" \ |
| "fdtheader_addr_r=0x80100000\0" \ |
| "kernelheader_addr_r=0x80200000\0" \ |
| "kernel_addr_r=0x81000000\0" \ |
| "kernel_start=0x1000000\0" \ |
| "kernelheader_start=0x800000\0" \ |
| "fdt_addr_r=0x90000000\0" \ |
| "load_addr=0xa0000000\0" \ |
| "kernelheader_addr=0x60600000\0" \ |
| "kernel_size=0x2800000\0" \ |
| "kernelheader_size=0x40000\0" \ |
| "kernel_addr_sd=0x8000\0" \ |
| "kernel_size_sd=0x14000\0" \ |
| "kernelhdr_addr_sd=0x3000\0" \ |
| "kernelhdr_size_sd=0x10\0" \ |
| "console=ttyS0,115200\0" \ |
| "boot_os=y\0" \ |
| BOOTENV \ |
| "boot_scripts=ls1043ardb_boot.scr\0" \ |
| "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \ |
| "scan_dev_for_boot_part=" \ |
| "part list ${devtype} ${devnum} devplist; " \ |
| "env exists devplist || setenv devplist 1; " \ |
| "for distro_bootpart in ${devplist}; do " \ |
| "if fstype ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "bootfstype; then " \ |
| "run scan_dev_for_boot; " \ |
| "fi; " \ |
| "done\0" \ |
| "boot_a_script=" \ |
| "load ${devtype} ${devnum}:${distro_bootpart} " \ |
| "${scriptaddr} ${prefix}${script}; " \ |
| "env exists secureboot && load ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ |
| "env exists secureboot " \ |
| "&& esbc_validate ${scripthdraddr};" \ |
| "source ${scriptaddr}\0" \ |
| "qspi_bootcmd=echo Trying load from qspi..;" \ |
| "sf probe && sf read $load_addr " \ |
| "$kernel_start $kernel_size; env exists secureboot " \ |
| "&& sf read $kernelheader_addr_r $kernelheader_start " \ |
| "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ |
| "bootm $load_addr#$board\0" \ |
| "nor_bootcmd=echo Trying load from nor..;" \ |
| "cp.b $kernel_addr $load_addr " \ |
| "$kernel_size; env exists secureboot " \ |
| "&& cp.b $kernelheader_addr $kernelheader_addr_r " \ |
| "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ |
| "bootm $load_addr#$board\0" \ |
| "nand_bootcmd=echo Trying load from NAND..;" \ |
| "nand info; nand read $load_addr " \ |
| "$kernel_start $kernel_size; env exists secureboot " \ |
| "&& nand read $kernelheader_addr_r $kernelheader_start " \ |
| "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ |
| "bootm $load_addr#$board\0" \ |
| "sd_bootcmd=echo Trying load from SD ..;" \ |
| "mmcinfo; mmc read $load_addr " \ |
| "$kernel_addr_sd $kernel_size_sd && " \ |
| "env exists secureboot && mmc read $kernelheader_addr_r " \ |
| "$kernelhdr_addr_sd $kernelhdr_size_sd " \ |
| " && esbc_validate ${kernelheader_addr_r};" \ |
| "bootm $load_addr#$board\0" |
| |
| |
| #ifdef CONFIG_TFABOOT |
| #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ |
| "env exists secureboot && esbc_halt;" |
| #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ |
| "env exists secureboot && esbc_halt;" |
| #define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ |
| "env exists secureboot && esbc_halt;" |
| #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ |
| "env exists secureboot && esbc_halt;" |
| #endif |
| #endif |
| |
| #include <asm/arch/soc.h> |
| |
| #endif /* __LS1043A_COMMON_H */ |