| /* |
| * Lowlevel setup for ORIGEN board based on EXYNOS4210 |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/arch/cpu.h> |
| #include "origen_setup.h" |
| /* |
| * Register usages: |
| * |
| * r5 has zero always |
| * r7 has GPIO part1 base 0x11400000 |
| * r6 has GPIO part2 base 0x11000000 |
| */ |
| |
| _TEXT_BASE: |
| .word CONFIG_SYS_TEXT_BASE |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| push {lr} |
| |
| /* r5 has always zero */ |
| mov r5, #0 |
| ldr r7, =EXYNOS4_GPIO_PART1_BASE |
| ldr r6, =EXYNOS4_GPIO_PART2_BASE |
| |
| /* check reset status */ |
| ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET) |
| ldr r1, [r0] |
| |
| /* AFTR wakeup reset */ |
| ldr r2, =S5P_CHECK_DIDLE |
| cmp r1, r2 |
| beq exit_wakeup |
| |
| /* LPA wakeup reset */ |
| ldr r2, =S5P_CHECK_LPA |
| cmp r1, r2 |
| beq exit_wakeup |
| |
| /* Sleep wakeup reset */ |
| ldr r2, =S5P_CHECK_SLEEP |
| cmp r1, r2 |
| beq wakeup_reset |
| |
| /* |
| * If U-boot is already running in ram, no need to relocate U-Boot. |
| * Memory controller must be configured before relocating U-Boot |
| * in ram. |
| */ |
| ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ |
| bic r1, pc, r0 /* pc <- current addr of code */ |
| /* r1 <- unmasked bits of pc */ |
| ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ |
| bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ |
| cmp r1, r2 /* compare r1, r2 */ |
| beq 1f /* r0 == r1 then skip sdram init */ |
| |
| /* init system clock */ |
| bl system_clock_init |
| |
| /* Memory initialize */ |
| bl mem_ctrl_asm_init |
| |
| 1: |
| /* for UART */ |
| bl uart_asm_init |
| bl arch_cpu_init |
| bl tzpc_init |
| pop {pc} |
| |
| wakeup_reset: |
| bl system_clock_init |
| bl mem_ctrl_asm_init |
| bl arch_cpu_init |
| bl tzpc_init |
| |
| exit_wakeup: |
| /* Load return address and jump to kernel */ |
| ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET) |
| |
| /* r1 = physical address of exynos4210_cpu_resume function */ |
| ldr r1, [r0] |
| |
| /* Jump to kernel*/ |
| mov pc, r1 |
| nop |
| nop |
| |
| /* |
| * system_clock_init: Initialize core clock and bus clock. |
| * void system_clock_init(void) |
| */ |
| system_clock_init: |
| push {lr} |
| ldr r0, =EXYNOS4_CLOCK_BASE |
| |
| /* APLL(1), MPLL(1), CORE(0), HPM(0) */ |
| ldr r1, =CLK_SRC_CPU_VAL |
| ldr r2, =CLK_SRC_CPU_OFFSET |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x10000 |
| 2: subs r1, r1, #1 |
| bne 2b |
| |
| ldr r1, =CLK_SRC_TOP0_VAL |
| ldr r2, =CLK_SRC_TOP0_OFFSET |
| str r1, [r0, r2] |
| |
| ldr r1, =CLK_SRC_TOP1_VAL |
| ldr r2, =CLK_SRC_TOP1_OFFSET |
| str r1, [r0, r2] |
| |
| /* DMC */ |
| ldr r1, =CLK_SRC_DMC_VAL |
| ldr r2, =CLK_SRC_DMC_OFFSET |
| str r1, [r0, r2] |
| |
| /*CLK_SRC_LEFTBUS */ |
| ldr r1, =CLK_SRC_LEFTBUS_VAL |
| ldr r2, =CLK_SRC_LEFTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /*CLK_SRC_RIGHTBUS */ |
| ldr r1, =CLK_SRC_RIGHTBUS_VAL |
| ldr r2, =CLK_SRC_RIGHTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ |
| ldr r1, =CLK_SRC_FSYS_VAL |
| ldr r2, =CLK_SRC_FSYS_OFFSET |
| str r1, [r0, r2] |
| |
| /* UART[0:4] */ |
| ldr r1, =CLK_SRC_PERIL0_VAL |
| ldr r2, =CLK_SRC_PERIL0_OFFSET |
| str r1, [r0, r2] |
| |
| /* CAM , FIMC 0-3 */ |
| ldr r1, =CLK_SRC_CAM_VAL |
| ldr r2, =CLK_SRC_CAM_OFFSET |
| str r1, [r0, r2] |
| |
| /* MFC */ |
| ldr r1, =CLK_SRC_MFC_VAL |
| ldr r2, =CLK_SRC_MFC_OFFSET |
| str r1, [r0, r2] |
| |
| /* G3D */ |
| ldr r1, =CLK_SRC_G3D_VAL |
| ldr r2, =CLK_SRC_G3D_OFFSET |
| str r1, [r0, r2] |
| |
| /* LCD0 */ |
| ldr r1, =CLK_SRC_LCD0_VAL |
| ldr r2, =CLK_SRC_LCD0_OFFSET |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x10000 |
| 3: subs r1, r1, #1 |
| bne 3b |
| |
| /* CLK_DIV_CPU0 */ |
| ldr r1, =CLK_DIV_CPU0_VAL |
| ldr r2, =CLK_DIV_CPU0_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_CPU1 */ |
| ldr r1, =CLK_DIV_CPU1_VAL |
| ldr r2, =CLK_DIV_CPU1_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_DMC0 */ |
| ldr r1, =CLK_DIV_DMC0_VAL |
| ldr r2, =CLK_DIV_DMC0_OFFSET |
| str r1, [r0, r2] |
| |
| /*CLK_DIV_DMC1 */ |
| ldr r1, =CLK_DIV_DMC1_VAL |
| ldr r2, =CLK_DIV_DMC1_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_LEFTBUS */ |
| ldr r1, =CLK_DIV_LEFTBUS_VAL |
| ldr r2, =CLK_DIV_LEFTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_RIGHTBUS */ |
| ldr r1, =CLK_DIV_RIGHTBUS_VAL |
| ldr r2, =CLK_DIV_RIGHTBUS_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_TOP */ |
| ldr r1, =CLK_DIV_TOP_VAL |
| ldr r2, =CLK_DIV_TOP_OFFSET |
| str r1, [r0, r2] |
| |
| /* MMC[0:1] */ |
| ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =CLK_DIV_FSYS1_OFFSET |
| str r1, [r0, r2] |
| |
| /* MMC[2:3] */ |
| ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =CLK_DIV_FSYS2_OFFSET |
| str r1, [r0, r2] |
| |
| /* MMC4 */ |
| ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ |
| ldr r2, =CLK_DIV_FSYS3_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_PERIL0: UART Clock Divisors */ |
| ldr r1, =CLK_DIV_PERIL0_VAL |
| ldr r2, =CLK_DIV_PERIL0_OFFSET |
| str r1, [r0, r2] |
| |
| /* CAM, FIMC 0-3: CAM Clock Divisors */ |
| ldr r1, =CLK_DIV_CAM_VAL |
| ldr r2, =CLK_DIV_CAM_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_MFC: MFC Clock Divisors */ |
| ldr r1, =CLK_DIV_MFC_VAL |
| ldr r2, =CLK_DIV_MFC_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_G3D: G3D Clock Divisors */ |
| ldr r1, =CLK_DIV_G3D_VAL |
| ldr r2, =CLK_DIV_G3D_OFFSET |
| str r1, [r0, r2] |
| |
| /* CLK_DIV_LCD0: LCD0 Clock Divisors */ |
| ldr r1, =CLK_DIV_LCD0_VAL |
| ldr r2, =CLK_DIV_LCD0_OFFSET |
| str r1, [r0, r2] |
| |
| /* Set PLL locktime */ |
| ldr r1, =PLL_LOCKTIME |
| ldr r2, =APLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| |
| ldr r1, =PLL_LOCKTIME |
| ldr r2, =MPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| |
| ldr r1, =PLL_LOCKTIME |
| ldr r2, =EPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| |
| ldr r1, =PLL_LOCKTIME |
| ldr r2, =VPLL_LOCK_OFFSET |
| str r1, [r0, r2] |
| |
| /* APLL_CON1 */ |
| ldr r1, =APLL_CON1_VAL |
| ldr r2, =APLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* APLL_CON0 */ |
| ldr r1, =APLL_CON0_VAL |
| ldr r2, =APLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* MPLL_CON1 */ |
| ldr r1, =MPLL_CON1_VAL |
| ldr r2, =MPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* MPLL_CON0 */ |
| ldr r1, =MPLL_CON0_VAL |
| ldr r2, =MPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* EPLL */ |
| ldr r1, =EPLL_CON1_VAL |
| ldr r2, =EPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* EPLL_CON0 */ |
| ldr r1, =EPLL_CON0_VAL |
| ldr r2, =EPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* VPLL_CON1 */ |
| ldr r1, =VPLL_CON1_VAL |
| ldr r2, =VPLL_CON1_OFFSET |
| str r1, [r0, r2] |
| |
| /* VPLL_CON0 */ |
| ldr r1, =VPLL_CON0_VAL |
| ldr r2, =VPLL_CON0_OFFSET |
| str r1, [r0, r2] |
| |
| /* wait ?us */ |
| mov r1, #0x30000 |
| 4: subs r1, r1, #1 |
| bne 4b |
| |
| pop {pc} |
| /* |
| * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. |
| * void uart_asm_init(void) |
| */ |
| .globl uart_asm_init |
| uart_asm_init: |
| |
| /* setup UART0-UART3 GPIOs (part1) */ |
| mov r0, r7 |
| ldr r1, =EXYNOS4_GPIO_A0_CON_VAL |
| str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET] |
| ldr r1, =EXYNOS4_GPIO_A1_CON_VAL |
| str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET] |
| |
| ldr r0, =EXYNOS4_UART_BASE |
| add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET |
| |
| ldr r1, =ULCON_VAL |
| str r1, [r0, #ULCON_OFFSET] |
| ldr r1, =UCON_VAL |
| str r1, [r0, #UCON_OFFSET] |
| ldr r1, =UFCON_VAL |
| str r1, [r0, #UFCON_OFFSET] |
| ldr r1, =UBRDIV_VAL |
| str r1, [r0, #UBRDIV_OFFSET] |
| ldr r1, =UFRACVAL_VAL |
| str r1, [r0, #UFRACVAL_OFFSET] |
| mov pc, lr |
| nop |
| nop |
| nop |
| |