| /* |
| * (C) Copyright 2010-2012 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _TEGRA20_COMMON_H_ |
| #define _TEGRA20_COMMON_H_ |
| #include "tegra-common.h" |
| |
| /* Cortex-A9 uses a cache line size of 32 bytes */ |
| #define CONFIG_SYS_CACHELINE_SIZE 32 |
| |
| /* |
| * Errata configuration |
| */ |
| #define CONFIG_ARM_ERRATA_716044 |
| #define CONFIG_ARM_ERRATA_742230 |
| #define CONFIG_ARM_ERRATA_751472 |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_STACKBASE 0x02800000 /* 40MB */ |
| |
| /*----------------------------------------------------------------------- |
| * Physical Memory Map |
| */ |
| #define CONFIG_SYS_TEXT_BASE 0x0010E000 |
| |
| /* |
| * Memory layout for where various images get loaded by boot scripts: |
| * |
| * scriptaddr can be pretty much anywhere that doesn't conflict with something |
| * else. Put it above BOOTMAPSZ to eliminate conflicts. |
| * |
| * pxefile_addr_r can be pretty much anywhere that doesn't conflict with |
| * something else. Put it above BOOTMAPSZ to eliminate conflicts. |
| * |
| * kernel_addr_r must be within the first 128M of RAM in order for the |
| * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will |
| * decompress itself to 0x8000 after the start of RAM, kernel_addr_r |
| * should not overlap that area, or the kernel will have to copy itself |
| * somewhere else before decompression. Similarly, the address of any other |
| * data passed to the kernel shouldn't overlap the start of RAM. Pushing |
| * this up to 16M allows for a sizable kernel to be decompressed below the |
| * compressed load address. |
| * |
| * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for |
| * the compressed kernel to be up to 16M too. |
| * |
| * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows |
| * for the FDT/DTB to be up to 1M, which is hopefully plenty. |
| */ |
| #define CONFIG_LOADADDR 0x01000000 |
| #define MEM_LAYOUT_ENV_SETTINGS \ |
| "scriptaddr=0x10000000\0" \ |
| "pxefile_addr_r=0x10100000\0" \ |
| "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ |
| "fdt_addr_r=0x02000000\0" \ |
| "ramdisk_addr_r=0x02100000\0" |
| |
| /* Defines for SPL */ |
| #define CONFIG_SPL_TEXT_BASE 0x00108000 |
| #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 |
| #define CONFIG_SPL_STACK 0x000ffffc |
| |
| /* Align LCD to 1MB boundary */ |
| #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE |
| |
| #ifdef CONFIG_TEGRA_LP0 |
| #define TEGRA_LP0_ADDR 0x1C406000 |
| #define TEGRA_LP0_SIZE 0x2000 |
| #define TEGRA_LP0_VEC \ |
| "lp0_vec=" __stringify(TEGRA_LP0_SIZE) \ |
| "@" __stringify(TEGRA_LP0_ADDR) " " |
| #else |
| #define TEGRA_LP0_VEC |
| #endif |
| |
| /* |
| * This parameter affects a TXFILLTUNING field that controls how much data is |
| * sent to the latency fifo before it is sent to the wire. Without this |
| * parameter, the default (2) causes occasional Data Buffer Errors in OUT |
| * packets depending on the buffer address and size. |
| */ |
| #define CONFIG_USB_EHCI_TXFIFO_THRESH 10 |
| #define CONFIG_EHCI_IS_TDI |
| #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 |
| |
| #define CONFIG_SYS_NAND_SELF_INIT |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| |
| #endif /* _TEGRA20_COMMON_H_ */ |