| /* |
| * Copyright (C) 2011 Andes Technology Corporation |
| * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/arch/ag102.h> |
| |
| /* |
| * CPU and Board Configuration Options |
| */ |
| #define CONFIG_ADP_AG102 |
| |
| #define CONFIG_USE_INTERRUPT |
| |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_MEM_REMAP |
| #endif |
| |
| #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_SYS_TEXT_BASE 0x04200000 |
| #else |
| #define CONFIG_SYS_TEXT_BASE 0x00000000 |
| #endif |
| |
| /* |
| * Timer |
| */ |
| #define CONFIG_SYS_CLK_FREQ (66000000 * 2) |
| #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ |
| |
| /* |
| * Use Externel CLOCK or PCLK |
| */ |
| #undef CONFIG_FTRTC010_EXTCLK |
| |
| #ifndef CONFIG_FTRTC010_EXTCLK |
| #define CONFIG_FTRTC010_PCLK |
| #endif |
| |
| #ifdef CONFIG_FTRTC010_EXTCLK |
| #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ |
| #else |
| #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ |
| #endif |
| |
| #define TIMER_LOAD_VAL 0xffffffff |
| |
| /* |
| * Real Time Clock |
| */ |
| #define CONFIG_RTC_FTRTC010 |
| |
| /* |
| * Real Time Clock Divider |
| * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) |
| */ |
| #define OSC_5MHZ (5*1000000) |
| #define OSC_CLK (2*OSC_5MHZ) |
| #define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) |
| |
| /* |
| * Serial console configuration |
| */ |
| |
| /* FTUART is a high speed NS 16C550A compatible UART */ |
| #define CONFIG_BAUDRATE 38400 |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE |
| #define CONFIG_SYS_NS16550_REG_SIZE -4 |
| #define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */ |
| |
| /* |
| * Ethernet |
| */ |
| #define CONFIG_NET_MULTI |
| #define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */ |
| #define CONFIG_SYS_DISCOVER_PHY |
| #define CONFIG_FTGMAC100 |
| #define CONFIG_FTGMAC100_EGIGA |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| /* |
| * SD (MMC) controller |
| */ |
| #define CONFIG_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_FTSDC010 |
| #define CONFIG_FTSDC010_NUMBER 1 |
| #define CONFIG_FTSDC010_SDIO |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_EXT2 |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_ELF |
| |
| #undef CONFIG_CMD_FLASH |
| #undef CONFIG_CMD_IMLS |
| |
| /* |
| * PCI |
| */ |
| #define CONFIG_PCI |
| #define CONFIG_FTPCI100 |
| #define CONFIG_PCI_INDIRECT_BRIDGE |
| #define CONFIG_FTPCI100_MEM_BASE 0xa0000000 |
| #define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */ |
| #define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */ |
| #define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50 |
| |
| #define CONFIG_PCI_MEM_BUS 0xa0000000 |
| #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS |
| #define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */ |
| |
| #define CONFIG_PCI_IO_BUS 0x90000000 |
| #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS |
| #define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */ |
| |
| /* |
| * USB |
| */ |
| #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) |
| #if defined(CONFIG_FTPCI100) |
| #define __io /* enable outl & inl */ |
| #define CONFIG_CMD_USB |
| #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5 |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_USB_EHCI |
| #define CONFIG_PCI_EHCI_DEVICE 0 |
| #define CONFIG_USB_EHCI_PCI |
| #define CONFIG_PREBOOT "usb start;" |
| #endif /* #if defiend(CONFIG_FTPCI100) */ |
| #endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */ |
| |
| /* |
| * IDE/ATA stuff |
| */ |
| #define __io |
| #define CONFIG_IDE_AHB |
| #define CONFIG_IDE_FTIDE020 |
| |
| #undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ |
| #undef CONFIG_IDE_LED /* no led for ide supported */ |
| #define CONFIG_IDE_RESET 1 /* reset for ide supported */ |
| #define CONFIG_IDE_PREINIT 1 /* preinit for ide */ |
| |
| /* max: 2 IDE busses */ |
| #define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */ |
| /* max: 2 drives per IDE bus */ |
| #define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */ |
| |
| #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
| #define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000 |
| |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */ |
| #define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */ |
| #define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */ |
| |
| #define CONFIG_MAC_PARTITION |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_SUPPORT_VFAT |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| |
| /* max number of command args */ |
| #define CONFIG_SYS_MAXARGS 16 |
| |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) |
| |
| /* |
| * AHB Controller configuration |
| */ |
| #define CONFIG_FTAHBC020S |
| |
| #ifdef CONFIG_FTAHBC020S |
| #include <faraday/ftahbc020s.h> |
| |
| /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ |
| #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 |
| |
| /* |
| * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, |
| * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote |
| * in C language. |
| */ |
| #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ |
| (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ |
| FTAHBC020S_SLAVE_BSR_SIZE(0xb)) |
| #endif |
| |
| /* |
| * Watchdog |
| */ |
| #define CONFIG_FTWDT010_WATCHDOG |
| |
| /* |
| * PCU Power Control Unit configuration |
| */ |
| #define CONFIG_ANDES_PCU |
| |
| #ifdef CONFIG_ANDES_PCU |
| #include <andestech/andes_pcu.h> |
| |
| #endif |
| |
| /* |
| * DDR DRAM controller configuration |
| */ |
| #define CONFIG_DWCDDR21MCTL |
| |
| #ifdef CONFIG_DWCDDR21MCTL |
| #include <synopsys/dwcddr21mctl.h> |
| /* DCR: |
| * 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend |
| * 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk |
| * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks) |
| * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank) |
| * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks) |
| */ |
| #define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004 |
| #define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \ |
| DWCDDR21MCTL_CCR_DFTLM(0x4) | \ |
| DWCDDR21MCTL_CCR_HOSTEN(0x1)) |
| |
| /* 0x04: 0x000020d4 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca |
| |
| /* 0x08: 0x0000000f */ |
| #define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f |
| |
| /* 0x10: 0x00034812 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \ |
| DWCDDR21MCTL_DRR_TRFPRD(0x0348)) |
| /* 0x24 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0) |
| |
| /* 0x4c: 0x00000040 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040 |
| |
| /* 0x5c: 0x000055CF */ |
| #define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf |
| |
| /* 0xa4: 0x00100000 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \ |
| DWCDDR21MCTL_DTAR_DTROW(0x0100) | \ |
| DWCDDR21MCTL_DTAR_DTCOL(0x0)) |
| /* 0x1f0: 0x00000852 */ |
| #define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \ |
| DWCDDR21MCTL_MR_CL(0x5) | \ |
| DWCDDR21MCTL_MR_BL(0x2)) |
| #endif |
| |
| /* |
| * Physical Memory Map |
| */ |
| #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) |
| #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ |
| #if defined(CONFIG_MEM_REMAP) |
| #define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/ |
| #endif |
| #else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ |
| #define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ |
| #endif |
| |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */ |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 |
| |
| #ifdef CONFIG_MEM_REMAP |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ |
| GENERATED_GBL_DATA_SIZE) |
| #else |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ |
| GENERATED_GBL_DATA_SIZE) |
| #endif /* CONFIG_MEM_REMAP */ |
| |
| /* |
| * Load address and memory test area should agree with |
| * board/faraday/a320/config.mk |
| * Be careful not to overwrite U-boot itself. |
| */ |
| #define CONFIG_SYS_LOAD_ADDR 0x0CF00000 |
| |
| /* memtest works on 63 MB in DRAM */ |
| #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 |
| #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) |
| |
| /* |
| * Static memory controller configuration |
| */ |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #define CONFIG_SYS_NO_FLASH |
| |
| /* |
| * Env Storage Settings |
| */ |
| #define CONFIG_ENV_IS_NOWHERE |
| #define CONFIG_ENV_SIZE 4096 |
| |
| #endif /* __CONFIG_H */ |