board/xaeniax/flash.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <linux/byteorder/swab.h>


 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */

 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
 #undef FLASH_PORT_WIDTH16

 #ifdef FLASH_PORT_WIDTH16
 #define FLASH_PORT_WIDTH		ushort
 #define FLASH_PORT_WIDTHV		vu_short
 #define SWAP(x)               __swab16(x)
 #else
 #define FLASH_PORT_WIDTH		ulong
 #define FLASH_PORT_WIDTHV		vu_long
 #define SWAP(x)               __swab32(x)
 #endif

 #define FPW    FLASH_PORT_WIDTH
 #define FPWV   FLASH_PORT_WIDTHV

 #define mb() __asm__ __volatile__ ("" : : : "memory")

 /*-----------------------------------------------------------------------
  * Functions
  */
 static ulong flash_get_size (FPW *addr, flash_info_t *info);
 static int write_data (flash_info_t *info, ulong dest, FPW data);
 static void flash_get_offsets (ulong base, flash_info_t *info);
 void inline spin_wheel (void);

 /*-----------------------------------------------------------------------
  */

 unsigned long flash_init (void)
 {
 	int i;
 	ulong size = 0;

 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
 			break;
 		case 1:
 			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
 			break;
 		default:
 			panic ("configured too many flash banks!\n");
 			break;
 		}
 		size += flash_info[i].size;
 	}

 	/* Protect monitor and environment sectors
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
 			CONFIG_SYS_FLASH_BASE,
 			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0] );

 	flash_protect ( FLAG_PROTECT_SET,
 			CONFIG_ENV_ADDR,
 			CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );

 	return size;
 }

 /*-----------------------------------------------------------------------
  */
 static void flash_get_offsets (ulong base, flash_info_t *info)
 {
 	int i;

 	if (info->flash_id == FLASH_UNKNOWN) {
 		return;
 	}

 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
 		for (i = 0; i < info->sector_count; i++) {
 			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
 			info->protect[i] = 0;
 		}
 	}
 }

 /*-----------------------------------------------------------------------
  */
 void flash_print_info (flash_info_t *info)
 {
 	int i;

 	if (info->flash_id == FLASH_UNKNOWN) {
 		printf ("missing or unknown FLASH type\n");
 		return;
 	}

 	switch (info->flash_id & FLASH_VENDMASK) {
 	case FLASH_MAN_INTEL:
 		printf ("INTEL ");
 		break;
 	default:
 		printf ("Unknown Vendor ");
 		break;
 	}

 	switch (info->flash_id & FLASH_TYPEMASK) {
 	case FLASH_28F128J3A:
 		printf ("28F128J3A\n");
 		break;
 	default:
 		printf ("Unknown Chip Type\n");
 		break;
 	}

 	printf ("  Size: %ld MB in %d Sectors\n",
 			info->size >> 20, info->sector_count);

 	printf ("  Sector Start Addresses:");
 	for (i = 0; i < info->sector_count; ++i) {
 		if ((i % 5) == 0)
 			printf ("\n   ");
 		printf (" %08lX%s",
 			info->start[i],
 			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");
 	return;
 }

 /*
  * The following code cannot be run from FLASH!
  */
 static ulong flash_get_size (FPW *addr, flash_info_t *info)
 {
 	volatile FPW value;

 	/* Write auto select command: read Manufacturer ID */
 	addr[0x5555] = (FPW) 0x00AA00AA;
 	addr[0x2AAA] = (FPW) 0x00550055;
 	addr[0x5555] = (FPW) 0x00900090;

 	mb ();
 	value = addr[0];

 	switch (value) {

 	case (FPW) INTEL_MANUFACT:
 		info->flash_id = FLASH_MAN_INTEL;
 		break;

 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
 		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
 		return (0);			/* no or unknown flash  */
 	}

 	mb ();
 	value = addr[1];			/* device ID        */

 	switch (value) {

 	case (FPW) INTEL_ID_28F128J3A:
 		info->flash_id += FLASH_28F128J3A;
 		info->sector_count = 128;
 		info->size = 0x02000000;
 		break;				/* => 16 MB     */

 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		break;
 	}

 	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
 			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
 		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}

 	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */

 	return (info->size);
 }


 /*-----------------------------------------------------------------------
  */

 int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
 	int prot, sect;
 	ulong type, start;
 	int rcode = 0;

 	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
 			printf ("- missing\n");
 		} else {
 			printf ("- no sectors to erase\n");
 		}
 		return 1;
 	}

 	type = (info->flash_id & FLASH_VENDMASK);
 	if ((type != FLASH_MAN_INTEL)) {
 		printf ("Can't erase unknown flash type %08lx - aborted\n",
 			info->flash_id);
 		return 1;
 	}

 	prot = 0;
 	for (sect = s_first; sect <= s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
 	}

 	if (prot) {
 		printf ("- Warning: %d protected sectors will not be erased!\n",
 			prot);
 	} else {
 		printf ("\n");
 	}

 	/* Disable interrupts which might cause a timeout here */
 	disable_interrupts();

 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
 			FPWV *addr = (FPWV *) (info->start[sect]);
 			FPW status;

 			printf ("Erasing sector %2d ... ", sect);

 			/* arm simple, non interrupt dependent timer */
 			start = get_timer(0);

 			*addr = (FPW) 0x00500050;	/* clear status register */
 			*addr = (FPW) 0x00200020;	/* erase setup */
 			*addr = (FPW) 0x00D000D0;	/* erase confirm */

 			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
 				if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
 					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
 					rcode = 1;
 					break;
 				}
 			}

 			*addr = 0x00500050;	/* clear status register cmd.   */
 			*addr = 0x00FF00FF;	/* resest to read mode          */

 			printf (" done\n");
 		}
 	}
 	return rcode;
 }

 /*-----------------------------------------------------------------------
  * Copy memory to flash, returns:
  * 0 - OK
  * 1 - write timeout
  * 2 - Flash not erased
  * 4 - Flash not identified
  */

 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
 	ulong cp, wp;
 	FPW data;
 	int count, i, l, rc, port_width;

 	if (info->flash_id == FLASH_UNKNOWN) {
 		return 4;
 	}
 /* get lower word aligned address */
 #ifdef FLASH_PORT_WIDTH16
 	wp = (addr & ~1);
 	port_width = 2;
 #else
 	wp = (addr & ~3);
 	port_width = 4;
 #endif

 	/*
 	 * handle unaligned start bytes
 	 */
 	if ((l = addr - wp) != 0) {
 		data = 0;
 		for (i = 0, cp = wp; i < l; ++i, ++cp) {
 			data = (data << 8) | (*(uchar *) cp);
 		}
 		for (; i < port_width && cnt > 0; ++i) {
 			data = (data << 8) | *src++;
 			--cnt;
 			++cp;
 		}
 		for (; cnt == 0 && i < port_width; ++i, ++cp) {
 			data = (data << 8) | (*(uchar *) cp);
 		}

 		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
 			return (rc);
 		}
 		wp += port_width;
 	}

 	/*
 	 * handle word aligned part
 	 */
 	count = 0;
 	while (cnt >= port_width) {
 		data = 0;
 		for (i = 0; i < port_width; ++i) {
 			data = (data << 8) | *src++;
 		}
 		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
 			return (rc);
 		}
 		wp += port_width;
 		cnt -= port_width;
 		if (count++ > 0x800) {
 			spin_wheel ();
 			count = 0;
 		}
 	}

 	if (cnt == 0) {
 		return (0);
 	}

 	/*
 	 * handle unaligned tail bytes
 	 */
 	data = 0;
 	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
 		data = (data << 8) | *src++;
 		--cnt;
 	}
 	for (; i < port_width; ++i, ++cp) {
 		data = (data << 8) | (*(uchar *) cp);
 	}

 	return (write_data (info, wp, SWAP (data)));
 }

 /*-----------------------------------------------------------------------
  * Write a word or halfword to Flash, returns:
  * 0 - OK
  * 1 - write timeout
  * 2 - Flash not erased
  */
 static int write_data (flash_info_t *info, ulong dest, FPW data)
 {
 	FPWV *addr = (FPWV *) dest;
 	ulong status;
 	ulong start;

 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
 		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
 	disable_interrupts();

 	*addr = (FPW) 0x00400040;	/* write setup */
 	*addr = data;

 	/* arm simple, non interrupt dependent timer */
 	start = get_timer(0);

 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
 		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
 	}

 	*addr = (FPW) 0x00FF00FF;	/* restore read mode */

 	return (0);
 }

 void inline spin_wheel (void)
 {
 	static int p = 0;
 	static char w[] = "\\/-";

 	printf ("\010%c", w[p]);
 	(++p == 3) ? (p = 0) : 0;
 }
	/*
	* (C) Copyright 2001
	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	*
	* (C) Copyright 2001
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <linux/byteorder/swab.h>


	flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */

	/* Board support for 1 or 2 flash devices */
	#define FLASH_PORT_WIDTH32
	#undef FLASH_PORT_WIDTH16

	#ifdef FLASH_PORT_WIDTH16
	#define FLASH_PORT_WIDTH ushort
	#define FLASH_PORT_WIDTHV vu_short
	#define SWAP(x) __swab16(x)
	#else
	#define FLASH_PORT_WIDTH ulong
	#define FLASH_PORT_WIDTHV vu_long
	#define SWAP(x) __swab32(x)
	#endif

	#define FPW FLASH_PORT_WIDTH
	#define FPWV FLASH_PORT_WIDTHV

	#define mb() __asm__ __volatile__ ("" : : : "memory")

	/*-----------------------------------------------------------------------
	* Functions
	*/
	static ulong flash_get_size (FPW addr, flash_info_t info);
	static int write_data (flash_info_t *info, ulong dest, FPW data);
	static void flash_get_offsets (ulong base, flash_info_t *info);
	void inline spin_wheel (void);

	/*-----------------------------------------------------------------------
	*/

	unsigned long flash_init (void)
	{
	int i;
	ulong size = 0;

	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
	switch (i) {
	case 0:
	flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
	flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
	break;
	case 1:
	flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
	flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
	break;
	default:
	panic ("configured too many flash banks!\n");
	break;
	}
	size += flash_info[i].size;
	}

	/* Protect monitor and environment sectors
	*/
	flash_protect ( FLAG_PROTECT_SET,
	CONFIG_SYS_FLASH_BASE,
	CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
	&flash_info[0] );

	flash_protect ( FLAG_PROTECT_SET,
	CONFIG_ENV_ADDR,
	CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );

	return size;
	}

	/*-----------------------------------------------------------------------
	*/
	static void flash_get_offsets (ulong base, flash_info_t *info)
	{
	int i;

	if (info->flash_id == FLASH_UNKNOWN) {
	return;
	}

	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
	for (i = 0; i < info->sector_count; i++) {
	info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
	info->protect[i] = 0;
	}
	}
	}

	/*-----------------------------------------------------------------------
	*/
	void flash_print_info (flash_info_t *info)
	{
	int i;

	if (info->flash_id == FLASH_UNKNOWN) {
	printf ("missing or unknown FLASH type\n");
	return;
	}

	switch (info->flash_id & FLASH_VENDMASK) {
	case FLASH_MAN_INTEL:
	printf ("INTEL ");
	break;
	default:
	printf ("Unknown Vendor ");
	break;
	}

	switch (info->flash_id & FLASH_TYPEMASK) {
	case FLASH_28F128J3A:
	printf ("28F128J3A\n");
	break;
	default:
	printf ("Unknown Chip Type\n");
	break;
	}

	printf (" Size: %ld MB in %d Sectors\n",
	info->size >> 20, info->sector_count);

	printf (" Sector Start Addresses:");
	for (i = 0; i < info->sector_count; ++i) {
	if ((i % 5) == 0)
	printf ("\n ");
	printf (" %08lX%s",
	info->start[i],
	info->protect[i] ? " (RO)" : " ");
	}
	printf ("\n");
	return;
	}

	/*
	* The following code cannot be run from FLASH!
	*/
	static ulong flash_get_size (FPW addr, flash_info_t info)
	{
	volatile FPW value;

	/* Write auto select command: read Manufacturer ID */
	addr[0x5555] = (FPW) 0x00AA00AA;
	addr[0x2AAA] = (FPW) 0x00550055;
	addr[0x5555] = (FPW) 0x00900090;

	mb ();
	value = addr[0];

	switch (value) {

	case (FPW) INTEL_MANUFACT:
	info->flash_id = FLASH_MAN_INTEL;
	break;

	default:
	info->flash_id = FLASH_UNKNOWN;
	info->sector_count = 0;
	info->size = 0;
	addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
	return (0); /* no or unknown flash */
	}

	mb ();
	value = addr[1]; /* device ID */

	switch (value) {

	case (FPW) INTEL_ID_28F128J3A:
	info->flash_id += FLASH_28F128J3A;
	info->sector_count = 128;
	info->size = 0x02000000;
	break; /* => 16 MB */

	default:
	info->flash_id = FLASH_UNKNOWN;
	break;
	}

	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
	printf (" ERROR: sector count %d > max (%d) \n",
	info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
	info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
	}

	addr[0] = (FPW) 0x00FF00FF; /* restore read mode */

	return (info->size);
	}


	/*-----------------------------------------------------------------------
	*/

	int flash_erase (flash_info_t *info, int s_first, int s_last)
	{
	int prot, sect;
	ulong type, start;
	int rcode = 0;

	if ((s_first < 0) \|\| (s_first > s_last)) {
	if (info->flash_id == FLASH_UNKNOWN) {
	printf ("- missing\n");
	} else {
	printf ("- no sectors to erase\n");
	}
	return 1;
	}

	type = (info->flash_id & FLASH_VENDMASK);
	if ((type != FLASH_MAN_INTEL)) {
	printf ("Can't erase unknown flash type %08lx - aborted\n",
	info->flash_id);
	return 1;
	}

	prot = 0;
	for (sect = s_first; sect <= s_last; ++sect) {
	if (info->protect[sect]) {
	prot++;
	}
	}

	if (prot) {
	printf ("- Warning: %d protected sectors will not be erased!\n",
	prot);
	} else {
	printf ("\n");
	}

	/* Disable interrupts which might cause a timeout here */
	disable_interrupts();

	/* Start erase on unprotected sectors */
	for (sect = s_first; sect <= s_last; sect++) {
	if (info->protect[sect] == 0) { /* not protected */
	FPWV addr = (FPWV ) (info->start[sect]);
	FPW status;

	printf ("Erasing sector %2d ... ", sect);

	/* arm simple, non interrupt dependent timer */
	start = get_timer(0);

	addr = (FPW) 0x00500050; / clear status register */
	addr = (FPW) 0x00200020; / erase setup */
	addr = (FPW) 0x00D000D0; / erase confirm */

	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
	if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
	printf ("Timeout\n");
	addr = (FPW) 0x00B000B0; / suspend erase */
	addr = (FPW) 0x00FF00FF; / reset to read mode */
	rcode = 1;
	break;
	}
	}

	addr = 0x00500050; / clear status register cmd. */
	addr = 0x00FF00FF; / resest to read mode */

	printf (" done\n");
	}
	}
	return rcode;
	}

	/*-----------------------------------------------------------------------
	* Copy memory to flash, returns:
	* 0 - OK
	* 1 - write timeout
	* 2 - Flash not erased
	* 4 - Flash not identified
	*/

	int write_buff (flash_info_t info, uchar src, ulong addr, ulong cnt)
	{
	ulong cp, wp;
	FPW data;
	int count, i, l, rc, port_width;

	if (info->flash_id == FLASH_UNKNOWN) {
	return 4;
	}
	/* get lower word aligned address */
	#ifdef FLASH_PORT_WIDTH16
	wp = (addr & ~1);
	port_width = 2;
	#else
	wp = (addr & ~3);
	port_width = 4;
	#endif

	/*
	* handle unaligned start bytes
	*/
	if ((l = addr - wp) != 0) {
	data = 0;
	for (i = 0, cp = wp; i < l; ++i, ++cp) {
	data = (data << 8) \| ((uchar ) cp);
	}
	for (; i < port_width && cnt > 0; ++i) {
	data = (data << 8) \| *src++;
	--cnt;
	++cp;
	}
	for (; cnt == 0 && i < port_width; ++i, ++cp) {
	data = (data << 8) \| ((uchar ) cp);
	}

	if ((rc = write_data (info, wp, SWAP (data))) != 0) {
	return (rc);
	}
	wp += port_width;
	}

	/*
	* handle word aligned part
	*/
	count = 0;
	while (cnt >= port_width) {
	data = 0;
	for (i = 0; i < port_width; ++i) {
	data = (data << 8) \| *src++;
	}
	if ((rc = write_data (info, wp, SWAP (data))) != 0) {
	return (rc);
	}
	wp += port_width;
	cnt -= port_width;
	if (count++ > 0x800) {
	spin_wheel ();
	count = 0;
	}
	}

	if (cnt == 0) {
	return (0);
	}

	/*
	* handle unaligned tail bytes
	*/
	data = 0;
	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
	data = (data << 8) \| *src++;
	--cnt;
	}
	for (; i < port_width; ++i, ++cp) {
	data = (data << 8) \| ((uchar ) cp);
	}

	return (write_data (info, wp, SWAP (data)));
	}

	/*-----------------------------------------------------------------------
	* Write a word or halfword to Flash, returns:
	* 0 - OK
	* 1 - write timeout
	* 2 - Flash not erased
	*/
	static int write_data (flash_info_t *info, ulong dest, FPW data)
	{
	FPWV addr = (FPWV ) dest;
	ulong status;
	ulong start;

	/* Check if Flash is (sufficiently) erased */
	if ((*addr & data) != data) {
	printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
	return (2);
	}
	/* Disable interrupts which might cause a timeout here */
	disable_interrupts();

	addr = (FPW) 0x00400040; / write setup */
	*addr = data;

	/* arm simple, non interrupt dependent timer */
	start = get_timer(0);

	/* wait while polling the status register */
	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
	addr = (FPW) 0x00FF00FF; / restore read mode */
	return (1);
	}
	}

	addr = (FPW) 0x00FF00FF; / restore read mode */

	return (0);
	}

	void inline spin_wheel (void)
	{
	static int p = 0;
	static char w[] = "\\/-";

	printf ("\010%c", w[p]);
	(++p == 3) ? (p = 0) : 0;
	}