| /* SPARC code for booting linux 2.6 |
| * |
| * (C) Copyright 2007 |
| * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/byteorder.h> |
| #include <asm/prom.h> |
| #include <asm/cache.h> |
| #include <image.h> |
| |
| #define PRINT_KERNEL_HEADER |
| |
| extern image_header_t header; |
| extern void srmmu_init_cpu(unsigned int entry); |
| extern void prepare_bootargs(char *bootargs); |
| |
| #ifdef CONFIG_USB_UHCI |
| extern int usb_lowlevel_stop(int index); |
| #endif |
| |
| /* sparc kernel argument (the ROM vector) */ |
| struct linux_romvec *kernel_arg_promvec; |
| |
| /* page szie is 4k */ |
| #define PAGE_SIZE 0x1000 |
| #define RAMDISK_IMAGE_START_MASK 0x07FF |
| #define RAMDISK_PROMPT_FLAG 0x8000 |
| #define RAMDISK_LOAD_FLAG 0x4000 |
| struct __attribute__ ((packed)) { |
| char traptable[PAGE_SIZE]; |
| char swapper_pg_dir[PAGE_SIZE]; |
| char pg0[PAGE_SIZE]; |
| char pg1[PAGE_SIZE]; |
| char pg2[PAGE_SIZE]; |
| char pg3[PAGE_SIZE]; |
| char empty_bad_page[PAGE_SIZE]; |
| char empty_bad_page_table[PAGE_SIZE]; |
| char empty_zero_page[PAGE_SIZE]; |
| unsigned char hdr[4]; /* ascii "HdrS" */ |
| /* 00.02.06.0b is for Linux kernel 2.6.11 */ |
| unsigned char linuxver_mega_major; |
| unsigned char linuxver_major; |
| unsigned char linuxver_minor; |
| unsigned char linuxver_revision; |
| /* header version 0x0203 */ |
| unsigned short hdr_ver; |
| union __attribute__ ((packed)) { |
| struct __attribute__ ((packed)) { |
| unsigned short root_flags; |
| unsigned short root_dev; |
| unsigned short ram_flags; |
| unsigned int sparc_ramdisk_image; |
| unsigned int sparc_ramdisk_size; |
| unsigned int reboot_command; |
| unsigned int resv[3]; |
| unsigned int end; |
| } ver_0203; |
| } hdr_input; |
| } *linux_hdr; |
| |
| /* temporary initrd image holder */ |
| image_header_t ihdr; |
| |
| void arch_lmb_reserve(struct lmb *lmb) |
| { |
| /* Reserve the space used by PROM and stack. This is done |
| * to avoid that the RAM image is copied over stack or |
| * PROM. |
| */ |
| lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END); |
| } |
| |
| /* boot the linux kernel */ |
| int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images) |
| { |
| char *bootargs; |
| ulong rd_len; |
| void (*kernel) (struct linux_romvec *, void *); |
| int ret; |
| |
| /* |
| * allow the PREP bootm subcommand, it is required for bootm to work |
| */ |
| if (flag & BOOTM_STATE_OS_PREP) |
| return 0; |
| |
| if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) |
| return 1; |
| |
| /* Get virtual address of kernel start */ |
| linux_hdr = (void *)images->os.load; |
| |
| /* */ |
| kernel = (void (*)(struct linux_romvec *, void *))images->ep; |
| |
| /* check for a SPARC kernel */ |
| if ((linux_hdr->hdr[0] != 'H') || |
| (linux_hdr->hdr[1] != 'd') || |
| (linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) { |
| puts("Error reading header of SPARC Linux kernel, aborting\n"); |
| goto error; |
| } |
| #ifdef PRINT_KERNEL_HEADER |
| printf("## Found SPARC Linux kernel %d.%d.%d ...\n", |
| linux_hdr->linuxver_major, |
| linux_hdr->linuxver_minor, linux_hdr->linuxver_revision); |
| #endif |
| |
| #ifdef CONFIG_USB_UHCI |
| usb_lowlevel_stop(); |
| #endif |
| |
| /* set basic boot params in kernel header now that it has been |
| * extracted and is writeable. |
| */ |
| |
| ret = image_setup_linux(images); |
| if (ret) { |
| puts("### Failed to relocate RAM disk\n"); |
| goto error; |
| } |
| |
| /* Calc length of RAM disk, if zero no ramdisk available */ |
| rd_len = images->rd_end - images->rd_start; |
| |
| if (rd_len) { |
| /* Update SPARC kernel header so that Linux knows |
| * what is going on and where to find RAM disk. |
| * |
| * Set INITRD Image address relative to RAM Start |
| */ |
| linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = |
| images->initrd_start - CONFIG_SYS_RAM_BASE; |
| linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len; |
| /* Clear READ ONLY flag if set to non-zero */ |
| linux_hdr->hdr_input.ver_0203.root_flags = 1; |
| /* Set root device to: Root_RAM0 */ |
| linux_hdr->hdr_input.ver_0203.root_dev = 0x100; |
| linux_hdr->hdr_input.ver_0203.ram_flags = 0; |
| } else { |
| /* NOT using RAMDISK image, overwriting kernel defaults */ |
| linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0; |
| linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0; |
| /* Leave to kernel defaults |
| linux_hdr->hdr_input.ver_0203.root_flags = 1; |
| linux_hdr->hdr_input.ver_0203.root_dev = 0; |
| linux_hdr->hdr_input.ver_0203.ram_flags = 0; |
| */ |
| } |
| |
| /* Copy bootargs from bootargs variable to kernel readable area */ |
| bootargs = getenv("bootargs"); |
| prepare_bootargs(bootargs); |
| |
| /* turn on mmu & setup context table & page table for process 0 (kernel) */ |
| srmmu_init_cpu((unsigned int)kernel); |
| |
| /* Enter SPARC Linux kernel |
| * From now on the only code in u-boot that will be |
| * executed is the PROM code. |
| */ |
| kernel(kernel_arg_promvec, (void *)images->ep); |
| |
| /* It will never come to this... */ |
| while (1) ; |
| |
| error: |
| return 1; |
| } |