| /* |
| * Copyright 2012 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this library; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "skeleton.dtsi" |
| |
| #include "sun5i.dtsi" |
| |
| #include <dt-bindings/pinctrl/sun4i-a10.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| framebuffer@0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0"; |
| clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; |
| status = "disabled"; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal { |
| /* milliseconds */ |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| thermal-sensors = <&rtp>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| cpu_alert0: cpu_alert0 { |
| /* milliCelsius */ |
| temperature = <850000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_crit: cpu_crit { |
| /* milliCelsius */ |
| temperature = <100000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| clocks { |
| ahb_gates: clk@01c20060 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun5i-a13-ahb-gates-clk"; |
| reg = <0x01c20060 0x8>; |
| clocks = <&ahb>; |
| clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", |
| "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", |
| "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", |
| "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", |
| "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", |
| "ahb_de_fe", "ahb_iep", "ahb_mali400"; |
| }; |
| |
| apb0_gates: clk@01c20068 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun5i-a13-apb0-gates-clk"; |
| reg = <0x01c20068 0x4>; |
| clocks = <&apb0>; |
| clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; |
| }; |
| |
| apb1_gates: clk@01c2006c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun5i-a13-apb1-gates-clk"; |
| reg = <0x01c2006c 0x4>; |
| clocks = <&apb1>; |
| clock-output-names = "apb1_i2c0", "apb1_i2c1", |
| "apb1_i2c2", "apb1_uart1", "apb1_uart3"; |
| }; |
| }; |
| }; |
| |
| &cpu0 { |
| clock-latency = <244144>; /* 8 32k periods */ |
| operating-points = < |
| /* kHz uV */ |
| 1008000 1400000 |
| 912000 1350000 |
| 864000 1300000 |
| 624000 1200000 |
| 576000 1200000 |
| 432000 1200000 |
| >; |
| #cooling-cells = <2>; |
| cooling-min-level = <0>; |
| cooling-max-level = <5>; |
| }; |
| |
| &pio { |
| compatible = "allwinner,sun5i-a13-pinctrl"; |
| |
| uart1_pins_a: uart1@0 { |
| allwinner,pins = "PE10", "PE11"; |
| allwinner,function = "uart1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| uart1_pins_b: uart1@1 { |
| allwinner,pins = "PG3", "PG4"; |
| allwinner,function = "uart1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |