include/configs/MPC8260ADS.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2001
  * Stuart Hughes <stuarth@lineo.com>
  * This file is based on similar values for other boards found in other
  * U-Boot config files, and some that I found in the mpc8260ads manual.
  *
  * Note: my board is a PILOT rev.
  * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
  *
  * (C) Copyright 2003-2004 Arabella Software Ltd.
  * Yuli Barcohen <yuli@arabellasw.com>
  * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
  * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
  * Ported to MPC8272ADS board.
  *
  * Copyright (c) 2005 MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
  * Added support for PCI bridge on MPC8272ADS
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC8260ADS	1	/* Motorola PQ2 ADS family board */

 #define CONFIG_CPM2		1	/* Has a CPM2 */

 /*
  * Figure out if we are booting low via flash HRCW or high via the BCSR.
  */
 #if (TEXT_BASE != 0xFFF00000)		/* Boot low (flash HRCW) */
 #   define CFG_LOWBOOT		1
 #endif

 /* ADS flavours */
 #define CFG_8260ADS		1	/* MPC8260ADS */
 #define CFG_8266ADS		2	/* MPC8266ADS */
 #define CFG_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
 #define CFG_8272ADS		4	/* MPC8272ADS */

 #ifndef CONFIG_ADSTYPE
 #define CONFIG_ADSTYPE		CFG_8260ADS
 #endif /* CONFIG_ADSTYPE */

 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CONFIG_MPC8272		1
 #else
 #define CONFIG_MPC8260		1
 #endif /* CONFIG_ADSTYPE == CFG_8272ADS */

 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/

 /* allow serial and ethaddr to be overwritten */
 #define CONFIG_ENV_OVERWRITE

 /*
  * select serial console configuration
  *
  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  * for SCC).
  *
  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  * defined elsewhere (for example, on the cogent platform, there are serial
  * ports on the motherboard which are used for the serial console - see
  * cogent/cma101/serial.[ch]).
  */
 #undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
 #define CONFIG_CONS_ON_SCC		/* define if console on SCC */
 #undef	CONFIG_CONS_NONE		/* define if console on something else */
 #define CONFIG_CONS_INDEX	1	/* which serial channel for console */

 /*
  * select ethernet configuration
  *
  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  * for FCC)
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
  * from CONFIG_COMMANDS to remove support for networking.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
 #define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */

 #ifdef CONFIG_ETHER_ON_FCC

 #define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */

 #if   CONFIG_ETHER_INDEX == 1

 # define CFG_PHY_ADDR		0
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
 # define CFG_CMXFCR_MASK	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)

 #elif CONFIG_ETHER_INDEX == 2

 #if CONFIG_ADSTYPE == CFG_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
 # define CFG_PHY_ADDR		3
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
 #else					/* RxCLK is CLK13, TxCLK is CLK14 */
 # define CFG_PHY_ADDR		0
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 #endif /* CONFIG_ADSTYPE == CFG_8272ADS */

 # define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)

 #endif	/* CONFIG_ETHER_INDEX */

 #define CFG_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */

 #define CONFIG_MII			/* MII PHY management		*/
 #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
 /*
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT	2		/* Port C */

 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CFG_MDIO_PIN	0x00002000	/* PC18 */
 #define CFG_MDC_PIN	0x00001000	/* PC19 */
 #else
 #define CFG_MDIO_PIN	0x00400000	/* PC9	*/
 #define CFG_MDC_PIN	0x00200000	/* PC10 */
 #endif /* CONFIG_ADSTYPE == CFG_8272ADS */

 #define MDIO_ACTIVE	(iop->pdir |=  CFG_MDIO_PIN)
 #define MDIO_TRISTATE	(iop->pdir &= ~CFG_MDIO_PIN)
 #define MDIO_READ	((iop->pdat &  CFG_MDIO_PIN) != 0)

 #define MDIO(bit)	if(bit) iop->pdat |=  CFG_MDIO_PIN; \
 			else	iop->pdat &= ~CFG_MDIO_PIN

 #define MDC(bit)	if(bit) iop->pdat |=  CFG_MDC_PIN; \
 			else	iop->pdat &= ~CFG_MDC_PIN

 #define MIIDELAY	udelay(1)

 #endif /* CONFIG_ETHER_ON_FCC */

 #if CONFIG_ADSTYPE >= CFG_PQ2FADS
 #undef CONFIG_SPD_EEPROM	/* On new boards, SDRAM is soldered */
 #else
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F

 #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
 #define CONFIG_SPD_ADDR		0x50
 #endif
 #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

 /*PCI*/
 #ifdef CONFIG_MPC8272
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_BOOTDELAY 0
 #define CONFIG_PCI_SCAN_SHOW
 #endif

 #ifndef CONFIG_SDRAM_PBI
 #define CONFIG_SDRAM_PBI	0 /* By default, use bank-based interleaving */
 #endif

 #ifndef CONFIG_8260_CLKIN
 #if CONFIG_ADSTYPE >= CFG_PQ2FADS
 #define CONFIG_8260_CLKIN	100000000	/* in Hz */
 #else
 #define CONFIG_8260_CLKIN	66000000	/* in Hz */
 #endif
 #endif

 #define CONFIG_BAUDRATE		115200

 #define CFG_EXCLUDE		CFG_CMD_BEDBUG	| \
 				CFG_CMD_BMP	| \
 				CFG_CMD_BSP	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DISPLAY | \
 				CFG_CMD_DOC	| \
 				CFG_CMD_DTT	| \
 				CFG_CMD_EEPROM	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_EXT2	| \
 				CFG_CMD_FAT	| \
 				CFG_CMD_FDC	| \
 				CFG_CMD_FDOS	| \
 				CFG_CMD_HWFLOW	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_KGDB	| \
 				CFG_CMD_MMC	| \
 				CFG_CMD_NAND	| \
 				CFG_CMD_PCMCIA	| \
 				CFG_CMD_REISER	| \
 				CFG_CMD_SCSI	| \
 				CFG_CMD_SPI	| \
 				CFG_CMD_SNTP	| \
 				CFG_CMD_UNIVERSE | \
 				CFG_CMD_USB	| \
 				CFG_CMD_VFD	| \
 				CFG_CMD_XIMG

 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 			         CFG_CMD_SDRAM	| \
 				 CFG_CMD_I2C	| \
 				 CFG_EXCLUDE	) )
 #elif CONFIG_ADSTYPE >= CFG_PQ2FADS
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CFG_CMD_SDRAM	| \
 				 CFG_CMD_I2C	| \
 				 CFG_CMD_PCI	| \
 				 CFG_EXCLUDE	) )
 #else
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CMD_CFG_PCI 	| \
 				 CFG_EXCLUDE 	) )
 #endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock2"

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
 #define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #endif

 #define CONFIG_BZIP2	/* include support for bzip2 compressed images */
 #undef	CONFIG_WATCHDOG /* disable platform specific watchdog */

 /*
  * Miscellaneous configurable options
  */
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define CFG_MAXARGS	16			/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x400000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 #define CFG_FLASH_BASE		0xff800000
 #define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
 #define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */
 #define CFG_FLASH_SIZE		8
 #define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
 #define CFG_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
 #define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
 #define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 #define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */

 /*
  * JFFS2 partitions
  *
  * Note: fake mtd_id used, no linux mtd map file
  */
 #define MTDIDS_DEFAULT		"nor0=mpc8260ads-0"
 #define MTDPARTS_DEFAULT	"mtdparts=mpc8260ads-0:-@1m(jffs2)"
 #define CFG_JFFS2_SORT_FRAGMENTS

 /* this is stuff came out of the Motorola docs */
 #ifndef CFG_LOWBOOT
 #define CFG_DEFAULT_IMMR	0x0F010000
 #endif

 #define CFG_IMMR		0xF0000000
 #define CFG_BCSR		0xF4500000
 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CFG_PCI_INT		0xF8200000
 #endif
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_LSDRAM_BASE		0xFD000000

 #define RS232EN_1		0x02000002
 #define RS232EN_2		0x01000001
 #define FETHIEN1		0x08000008
 #define FETH1_RST		0x04000004
 #define FETHIEN2		0x10000000
 #define FETH2_RST		0x08000000
 #define BCSR_PCI_MODE		0x01000000

 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 #ifdef CFG_LOWBOOT
 /* PQ2FADS flash HRCW = 0x0EB4B645 */
 #define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
 			    ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 )    |\
 			    ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
 			    ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	     \
 			)
 #else
 /* PQ2FADS BCSR HRCW = 0x0CB23645 */
 #define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
 			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
 			    ( HRCW_BMS | HRCW_APPC10 )			    |\
 			    ( HRCW_MODCK_H0101 )			     \
 			)
 #endif
 /* no slaves */
 #define CFG_HRCW_SLAVE1 0
 #define CFG_HRCW_SLAVE2 0
 #define CFG_HRCW_SLAVE3 0
 #define CFG_HRCW_SLAVE4 0
 #define CFG_HRCW_SLAVE5 0
 #define CFG_HRCW_SLAVE6 0
 #define CFG_HRCW_SLAVE7 0

 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM	0x02	/* Software reboot	     */

 #define CFG_MONITOR_BASE    TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT
 #endif

 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 #ifdef CONFIG_BZIP2
 #define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #else
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()	*/
 #endif /* CONFIG_BZIP2 */

 #ifndef CFG_RAMBOOT
 #  define CFG_ENV_IS_IN_FLASH	1
 #  define CFG_ENV_SECT_SIZE	0x40000
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
 #else
 #  define CFG_ENV_IS_IN_NVRAM	1
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
 #  define CFG_ENV_SIZE		0x200
 #endif /* CFG_RAMBOOT */

 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif

 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )

 #define CFG_HID2		0

 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x100C0000
 #define CFG_SIUMCR		0x0A200000
 #define CFG_SCCR		SCCR_DFBRG01
 #define CFG_BR0_PRELIM		CFG_FLASH_BASE | 0x00001801
 #define CFG_OR0_PRELIM		0xFF800876
 #define CFG_BR1_PRELIM		CFG_BCSR | 0x00001801
 #define CFG_OR1_PRELIM		0xFFFF8010

 /*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/

 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CFG_BR3_PRELIM	(CFG_PCI_INT | 0x1801)	/* PCI interrupt controller */
 #define CFG_OR3_PRELIM	0xFFFF8010
 #endif

 #define CFG_RMR			RMR_CSRE
 #define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0

 #if (CONFIG_ADSTYPE == CFG_8266ADS) || (CONFIG_ADSTYPE == CFG_8272ADS)
 #undef CFG_LSDRAM_BASE		/* No local bus SDRAM on these boards */
 #endif /* CONFIG_ADSTYPE == CFG_8266ADS */

 #if CONFIG_ADSTYPE == CFG_PQ2FADS
 #define CFG_OR2			0xFE002EC0
 #define CFG_PSDMR		0x824B36A3
 #define CFG_PSRT		0x13
 #define CFG_LSDMR		0x828737A3
 #define CFG_LSRT		0x13
 #define CFG_MPTPR		0x2800
 #elif CONFIG_ADSTYPE == CFG_8272ADS
 #define CFG_OR2			0xFC002CC0
 #define CFG_PSDMR		0x834E24A3
 #define CFG_PSRT		0x13
 #define CFG_MPTPR		0x2800
 #else
 #define CFG_OR2			0xFF000CA0
 #define CFG_PSDMR		0x016EB452
 #define CFG_PSRT		0x21
 #define CFG_LSDMR		0x0086A522
 #define CFG_LSRT		0x21
 #define CFG_MPTPR		0x1900
 #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */

 #define CFG_RESET_ADDRESS	0x04400000

 #if CONFIG_ADSTYPE == CFG_8272ADS

 /* PCI Memory map (if different from default map */
 #define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
 #define CFG_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
 #define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
 				 PICMR_PREFETCH_EN)

 /*
  * These are the windows that allow the CPU to access PCI address space.
  * All three PCI master windows, which allow the CPU to access PCI
  * prefetch, non prefetch, and IO space (see below), must all fit within
  * these windows.
  */

 /*
  * Master window that allows the CPU to access PCI Memory (prefetch).
  * This window will be setup with the second set of Outbound ATU registers
  * in the bridge.
  */

 #define CFG_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
 #define CFG_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
 #define	CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
 #define CFG_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
 #define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)

 /*
  * Master window that allows the CPU to access PCI Memory (non-prefetch).
  * This window will be setup with the second set of Outbound ATU registers
  * in the bridge.
  */

 #define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
 #define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
 #define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
 #define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
 #define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)

 /*
  * Master window that allows the CPU to access PCI IO space.
  * This window will be setup with the first set of Outbound ATU registers
  * in the bridge.
  */

 #define CFG_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
 #define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
 #define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
 #define CFG_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
 #define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)


 /* PCIBR0 - for PCI IO*/
 #define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
 #define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
 /* PCIBR1 - prefetch and non-prefetch regions joined together */
 #define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
 #define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)

 #endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/

 #if CONFIG_ADSTYPE == CFG_8272ADS
 #define CONFIG_HAS_ETH1
 #endif

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2001
	* Stuart Hughes <stuarth@lineo.com>
	* This file is based on similar values for other boards found in other
	* U-Boot config files, and some that I found in the mpc8260ads manual.
	*
	* Note: my board is a PILOT rev.
	* Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
	*
	* (C) Copyright 2003-2004 Arabella Software Ltd.
	* Yuli Barcohen <yuli@arabellasw.com>
	* Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
	* Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
	* Ported to MPC8272ADS board.
	*
	* Copyright (c) 2005 MontaVista Software, Inc.
	* Vitaly Bordug <vbordug@ru.mvista.com>
	* Added support for PCI bridge on MPC8272ADS
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */

	#define CONFIG_CPM2 1 /* Has a CPM2 */

	/*
	* Figure out if we are booting low via flash HRCW or high via the BCSR.
	*/
	#if (TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */
	# define CFG_LOWBOOT 1
	#endif

	/* ADS flavours */
	#define CFG_8260ADS 1 /* MPC8260ADS */
	#define CFG_8266ADS 2 /* MPC8266ADS */
	#define CFG_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */
	#define CFG_8272ADS 4 /* MPC8272ADS */

	#ifndef CONFIG_ADSTYPE
	#define CONFIG_ADSTYPE CFG_8260ADS
	#endif /* CONFIG_ADSTYPE */

	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CONFIG_MPC8272 1
	#else
	#define CONFIG_MPC8260 1
	#endif /* CONFIG_ADSTYPE == CFG_8272ADS */

	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */

	/* allow serial and ethaddr to be overwritten */
	#define CONFIG_ENV_OVERWRITE

	/*
	* select serial console configuration
	*
	* if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*
	* if CONFIG_CONS_NONE is defined, then the serial console routines must
	* defined elsewhere (for example, on the cogent platform, there are serial
	* ports on the motherboard which are used for the serial console - see
	* cogent/cma101/serial.[ch]).
	*/
	#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
	#define CONFIG_CONS_ON_SCC /* define if console on SCC */
	#undef CONFIG_CONS_NONE /* define if console on something else */
	#define CONFIG_CONS_INDEX 1 /* which serial channel for console */

	/*
	* select ethernet configuration
	*
	* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
	* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
	* for FCC)
	*
	* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
	* defined elsewhere (as for the console), or CFG_CMD_NET must be removed
	* from CONFIG_COMMANDS to remove support for networking.
	*/
	#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
	#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
	#undef CONFIG_ETHER_NONE /* define if ether on something else */

	#ifdef CONFIG_ETHER_ON_FCC

	#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */

	#if CONFIG_ETHER_INDEX == 1

	# define CFG_PHY_ADDR 0
	# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK11 \| CMXFCR_TF1CS_CLK10)
	# define CFG_CMXFCR_MASK (CMXFCR_FC1 \| CMXFCR_RF1CS_MSK \| CMXFCR_TF1CS_MSK)

	#elif CONFIG_ETHER_INDEX == 2

	#if CONFIG_ADSTYPE == CFG_8272ADS /* RxCLK is CLK15, TxCLK is CLK16 */
	# define CFG_PHY_ADDR 3
	# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK15 \| CMXFCR_TF2CS_CLK16)
	#else /* RxCLK is CLK13, TxCLK is CLK14 */
	# define CFG_PHY_ADDR 0
	# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
	#endif /* CONFIG_ADSTYPE == CFG_8272ADS */

	# define CFG_CMXFCR_MASK (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)

	#endif /* CONFIG_ETHER_INDEX */

	#define CFG_CPMFCR_RAMTYPE 0 /* BDs and buffers on 60x bus */
	#define CFG_FCC_PSMR (FCC_PSMR_FDE \| FCC_PSMR_LPB) /* Full duplex */

	#define CONFIG_MII /* MII PHY management */
	#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
	/*
	* GPIO pins used for bit-banged MII communications
	*/
	#define MDIO_PORT 2 /* Port C */

	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CFG_MDIO_PIN 0x00002000 /* PC18 */
	#define CFG_MDC_PIN 0x00001000 /* PC19 */
	#else
	#define CFG_MDIO_PIN 0x00400000 /* PC9 */
	#define CFG_MDC_PIN 0x00200000 /* PC10 */
	#endif /* CONFIG_ADSTYPE == CFG_8272ADS */

	#define MDIO_ACTIVE (iop->pdir \|= CFG_MDIO_PIN)
	#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
	#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)

	#define MDIO(bit) if(bit) iop->pdat \|= CFG_MDIO_PIN; \
	else iop->pdat &= ~CFG_MDIO_PIN

	#define MDC(bit) if(bit) iop->pdat \|= CFG_MDC_PIN; \
	else iop->pdat &= ~CFG_MDC_PIN

	#define MIIDELAY udelay(1)

	#endif /* CONFIG_ETHER_ON_FCC */

	#if CONFIG_ADSTYPE >= CFG_PQ2FADS
	#undef CONFIG_SPD_EEPROM /* On new boards, SDRAM is soldered */
	#else
	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
	#define CFG_I2C_SLAVE 0x7F

	#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
	#define CONFIG_SPD_ADDR 0x50
	#endif
	#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

	/PCI/
	#ifdef CONFIG_MPC8272
	#define CONFIG_PCI
	#define CONFIG_PCI_PNP
	#define CONFIG_PCI_BOOTDELAY 0
	#define CONFIG_PCI_SCAN_SHOW
	#endif

	#ifndef CONFIG_SDRAM_PBI
	#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
	#endif

	#ifndef CONFIG_8260_CLKIN
	#if CONFIG_ADSTYPE >= CFG_PQ2FADS
	#define CONFIG_8260_CLKIN 100000000 /* in Hz */
	#else
	#define CONFIG_8260_CLKIN 66000000 /* in Hz */
	#endif
	#endif

	#define CONFIG_BAUDRATE 115200

	#define CFG_EXCLUDE CFG_CMD_BEDBUG \| \
	CFG_CMD_BMP \| \
	CFG_CMD_BSP \| \
	CFG_CMD_DATE \| \
	CFG_CMD_DISPLAY \| \
	CFG_CMD_DOC \| \
	CFG_CMD_DTT \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_ELF \| \
	CFG_CMD_EXT2 \| \
	CFG_CMD_FAT \| \
	CFG_CMD_FDC \| \
	CFG_CMD_FDOS \| \
	CFG_CMD_HWFLOW \| \
	CFG_CMD_IDE \| \
	CFG_CMD_KGDB \| \
	CFG_CMD_MMC \| \
	CFG_CMD_NAND \| \
	CFG_CMD_PCMCIA \| \
	CFG_CMD_REISER \| \
	CFG_CMD_SCSI \| \
	CFG_CMD_SPI \| \
	CFG_CMD_SNTP \| \
	CFG_CMD_UNIVERSE \| \
	CFG_CMD_USB \| \
	CFG_CMD_VFD \| \
	CFG_CMD_XIMG

	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
	CFG_CMD_SDRAM \| \
	CFG_CMD_I2C \| \
	CFG_EXCLUDE ) )
	#elif CONFIG_ADSTYPE >= CFG_PQ2FADS
	#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
	CFG_CMD_SDRAM \| \
	CFG_CMD_I2C \| \
	CFG_CMD_PCI \| \
	CFG_EXCLUDE ) )
	#else
	#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
	CMD_CFG_PCI \| \
	CFG_EXCLUDE ) )
	#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */
	#define CONFIG_BOOTARGS "root=/dev/mtdblock2"

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	#endif

	#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CFG_LOAD_ADDR 0x400000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	#define CFG_FLASH_BASE 0xff800000
	#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
	#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
	#define CFG_FLASH_SIZE 8
	#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
	#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
	#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
	#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */

	/*
	* JFFS2 partitions
	*
	* Note: fake mtd_id used, no linux mtd map file
	*/
	#define MTDIDS_DEFAULT "nor0=mpc8260ads-0"
	#define MTDPARTS_DEFAULT "mtdparts=mpc8260ads-0:-@1m(jffs2)"
	#define CFG_JFFS2_SORT_FRAGMENTS

	/* this is stuff came out of the Motorola docs */
	#ifndef CFG_LOWBOOT
	#define CFG_DEFAULT_IMMR 0x0F010000
	#endif

	#define CFG_IMMR 0xF0000000
	#define CFG_BCSR 0xF4500000
	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CFG_PCI_INT 0xF8200000
	#endif
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_LSDRAM_BASE 0xFD000000

	#define RS232EN_1 0x02000002
	#define RS232EN_2 0x01000001
	#define FETHIEN1 0x08000008
	#define FETH1_RST 0x04000004
	#define FETHIEN2 0x10000000
	#define FETH2_RST 0x08000000
	#define BCSR_PCI_MODE 0x01000000

	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	#ifdef CFG_LOWBOOT
	/* PQ2FADS flash HRCW = 0x0EB4B645 */
	#define CFG_HRCW_MASTER ( ( HRCW_BPS11 \| HRCW_CIP ) \|\
	( HRCW_L2CPC10 \| HRCW_DPPC11 \| HRCW_ISB100 ) \|\
	( HRCW_BMS \| HRCW_MMR11 \| HRCW_LBPC01 \| HRCW_APPC10 ) \|\
	( HRCW_CS10PC01 \| HRCW_MODCK_H0101 ) \
	)
	#else
	/* PQ2FADS BCSR HRCW = 0x0CB23645 */
	#define CFG_HRCW_MASTER ( ( HRCW_BPS11 \| HRCW_CIP ) \|\
	( HRCW_L2CPC10 \| HRCW_DPPC10 \| HRCW_ISB010 ) \|\
	( HRCW_BMS \| HRCW_APPC10 ) \|\
	( HRCW_MODCK_H0101 ) \
	)
	#endif
	/* no slaves */
	#define CFG_HRCW_SLAVE1 0
	#define CFG_HRCW_SLAVE2 0
	#define CFG_HRCW_SLAVE3 0
	#define CFG_HRCW_SLAVE4 0
	#define CFG_HRCW_SLAVE5 0
	#define CFG_HRCW_SLAVE6 0
	#define CFG_HRCW_SLAVE7 0

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CFG_MONITOR_BASE TEXT_BASE
	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	# define CFG_RAMBOOT
	#endif

	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	#ifdef CONFIG_BZIP2
	#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
	#else
	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
	#endif /* CONFIG_BZIP2 */

	#ifndef CFG_RAMBOOT
	# define CFG_ENV_IS_IN_FLASH 1
	# define CFG_ENV_SECT_SIZE 0x40000
	# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
	#else
	# define CFG_ENV_IS_IN_NVRAM 1
	# define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
	# define CFG_ENV_SIZE 0x200
	#endif /* CFG_RAMBOOT */

	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	#define CFG_HID0_INIT 0
	#define CFG_HID0_FINAL (HID0_ICE \| HID0_IFEM \| HID0_ABE )

	#define CFG_HID2 0

	#define CFG_SYPCR 0xFFFFFFC3
	#define CFG_BCR 0x100C0000
	#define CFG_SIUMCR 0x0A200000
	#define CFG_SCCR SCCR_DFBRG01
	#define CFG_BR0_PRELIM CFG_FLASH_BASE \| 0x00001801
	#define CFG_OR0_PRELIM 0xFF800876
	#define CFG_BR1_PRELIM CFG_BCSR \| 0x00001801
	#define CFG_OR1_PRELIM 0xFFFF8010

	/We need to configure chip select to use CPLD PCI IC on MPC8272ADS/

	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CFG_BR3_PRELIM (CFG_PCI_INT \| 0x1801) /* PCI interrupt controller */
	#define CFG_OR3_PRELIM 0xFFFF8010
	#endif

	#define CFG_RMR RMR_CSRE
	#define CFG_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)
	#define CFG_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)
	#define CFG_RCCR 0

	#if (CONFIG_ADSTYPE == CFG_8266ADS) \|\| (CONFIG_ADSTYPE == CFG_8272ADS)
	#undef CFG_LSDRAM_BASE /* No local bus SDRAM on these boards */
	#endif /* CONFIG_ADSTYPE == CFG_8266ADS */

	#if CONFIG_ADSTYPE == CFG_PQ2FADS
	#define CFG_OR2 0xFE002EC0
	#define CFG_PSDMR 0x824B36A3
	#define CFG_PSRT 0x13
	#define CFG_LSDMR 0x828737A3
	#define CFG_LSRT 0x13
	#define CFG_MPTPR 0x2800
	#elif CONFIG_ADSTYPE == CFG_8272ADS
	#define CFG_OR2 0xFC002CC0
	#define CFG_PSDMR 0x834E24A3
	#define CFG_PSRT 0x13
	#define CFG_MPTPR 0x2800
	#else
	#define CFG_OR2 0xFF000CA0
	#define CFG_PSDMR 0x016EB452
	#define CFG_PSRT 0x21
	#define CFG_LSDMR 0x0086A522
	#define CFG_LSRT 0x21
	#define CFG_MPTPR 0x1900
	#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */

	#define CFG_RESET_ADDRESS 0x04400000

	#if CONFIG_ADSTYPE == CFG_8272ADS

	/* PCI Memory map (if different from default map */
	#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */
	#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
	#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB \| PICMR_ENABLE \| \
	PICMR_PREFETCH_EN)

	/*
	* These are the windows that allow the CPU to access PCI address space.
	* All three PCI master windows, which allow the CPU to access PCI
	* prefetch, non prefetch, and IO space (see below), must all fit within
	* these windows.
	*/

	/*
	* Master window that allows the CPU to access PCI Memory (prefetch).
	* This window will be setup with the second set of Outbound ATU registers
	* in the bridge.
	*/

	#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
	#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
	#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
	#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
	#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE \| POCMR_PREFETCH_EN)

	/*
	* Master window that allows the CPU to access PCI Memory (non-prefetch).
	* This window will be setup with the second set of Outbound ATU registers
	* in the bridge.
	*/

	#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
	#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
	#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
	#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
	#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE)

	/*
	* Master window that allows the CPU to access PCI IO space.
	* This window will be setup with the first set of Outbound ATU registers
	* in the bridge.
	*/

	#define CFG_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
	#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
	#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
	#define CFG_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
	#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB \| POCMR_ENABLE \| POCMR_PCI_IO)


	/* PCIBR0 - for PCI IO*/
	#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
	#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
	/* PCIBR1 - prefetch and non-prefetch regions joined together */
	#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
	#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)

	#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/

	#if CONFIG_ADSTYPE == CFG_8272ADS
	#define CONFIG_HAS_ETH1
	#endif

	#endif /* __CONFIG_H */