| /* |
| * (C) Copyright 2008 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _KWBIMAGE_H_ |
| #define _KWBIMAGE_H_ |
| |
| #include <compiler.h> |
| #include <stdint.h> |
| |
| #define KWBIMAGE_MAX_CONFIG ((0x1dc - 0x20)/sizeof(struct reg_config)) |
| #define MAX_TEMPBUF_LEN 32 |
| |
| /* NAND ECC Mode */ |
| #define IBR_HDR_ECC_DEFAULT 0x00 |
| #define IBR_HDR_ECC_FORCED_HAMMING 0x01 |
| #define IBR_HDR_ECC_FORCED_RS 0x02 |
| #define IBR_HDR_ECC_DISABLED 0x03 |
| |
| /* Boot Type - block ID */ |
| #define IBR_HDR_I2C_ID 0x4D |
| #define IBR_HDR_SPI_ID 0x5A |
| #define IBR_HDR_NAND_ID 0x8B |
| #define IBR_HDR_SATA_ID 0x78 |
| #define IBR_HDR_PEX_ID 0x9C |
| #define IBR_HDR_UART_ID 0x69 |
| #define IBR_DEF_ATTRIB 0x00 |
| |
| #define ALIGN_SUP(x, a) (((x) + (a - 1)) & ~(a - 1)) |
| |
| /* Structure of the main header, version 0 (Kirkwood, Dove) */ |
| struct main_hdr_v0 { |
| uint8_t blockid; /*0 */ |
| uint8_t nandeccmode; /*1 */ |
| uint16_t nandpagesize; /*2-3 */ |
| uint32_t blocksize; /*4-7 */ |
| uint32_t rsvd1; /*8-11 */ |
| uint32_t srcaddr; /*12-15 */ |
| uint32_t destaddr; /*16-19 */ |
| uint32_t execaddr; /*20-23 */ |
| uint8_t satapiomode; /*24 */ |
| uint8_t rsvd3; /*25 */ |
| uint16_t ddrinitdelay; /*26-27 */ |
| uint16_t rsvd2; /*28-29 */ |
| uint8_t ext; /*30 */ |
| uint8_t checksum; /*31 */ |
| }; |
| |
| struct ext_hdr_v0_reg { |
| uint32_t raddr; |
| uint32_t rdata; |
| }; |
| |
| #define EXT_HDR_V0_REG_COUNT ((0x1dc - 0x20) / sizeof(struct ext_hdr_v0_reg)) |
| |
| struct ext_hdr_v0 { |
| uint32_t offset; |
| uint8_t reserved[0x20 - sizeof(uint32_t)]; |
| struct ext_hdr_v0_reg rcfg[EXT_HDR_V0_REG_COUNT]; |
| uint8_t reserved2[7]; |
| uint8_t checksum; |
| }; |
| |
| struct kwb_header { |
| struct main_hdr_v0 kwb_hdr; |
| struct ext_hdr_v0 kwb_exthdr; |
| }; |
| |
| /* Structure of the main header, version 1 (Armada 370, Armada XP) */ |
| struct main_hdr_v1 { |
| uint8_t blockid; /* 0 */ |
| uint8_t reserved1; /* 1 */ |
| uint16_t reserved2; /* 2-3 */ |
| uint32_t blocksize; /* 4-7 */ |
| uint8_t version; /* 8 */ |
| uint8_t headersz_msb; /* 9 */ |
| uint16_t headersz_lsb; /* A-B */ |
| uint32_t srcaddr; /* C-F */ |
| uint32_t destaddr; /* 10-13 */ |
| uint32_t execaddr; /* 14-17 */ |
| uint8_t reserved3; /* 18 */ |
| uint8_t nandblocksize; /* 19 */ |
| uint8_t nandbadblklocation; /* 1A */ |
| uint8_t reserved4; /* 1B */ |
| uint16_t reserved5; /* 1C-1D */ |
| uint8_t ext; /* 1E */ |
| uint8_t checksum; /* 1F */ |
| }; |
| |
| /* |
| * Header for the optional headers, version 1 (Armada 370, Armada XP) |
| */ |
| struct opt_hdr_v1 { |
| uint8_t headertype; |
| uint8_t headersz_msb; |
| uint16_t headersz_lsb; |
| char data[0]; |
| }; |
| |
| /* |
| * Various values for the opt_hdr_v1->headertype field, describing the |
| * different types of optional headers. The "secure" header contains |
| * informations related to secure boot (encryption keys, etc.). The |
| * "binary" header contains ARM binary code to be executed prior to |
| * executing the main payload (usually the bootloader). This is |
| * typically used to execute DDR3 training code. The "register" header |
| * allows to describe a set of (address, value) tuples that are |
| * generally used to configure the DRAM controller. |
| */ |
| #define OPT_HDR_V1_SECURE_TYPE 0x1 |
| #define OPT_HDR_V1_BINARY_TYPE 0x2 |
| #define OPT_HDR_V1_REGISTER_TYPE 0x3 |
| |
| #define KWBHEADER_V1_SIZE(hdr) \ |
| (((hdr)->headersz_msb << 16) | le16_to_cpu((hdr)->headersz_lsb)) |
| |
| enum kwbimage_cmd { |
| CMD_INVALID, |
| CMD_BOOT_FROM, |
| CMD_NAND_ECC_MODE, |
| CMD_NAND_PAGE_SIZE, |
| CMD_SATA_PIO_MODE, |
| CMD_DDR_INIT_DELAY, |
| CMD_DATA |
| }; |
| |
| enum kwbimage_cmd_types { |
| CFG_INVALID = -1, |
| CFG_COMMAND, |
| CFG_DATA0, |
| CFG_DATA1 |
| }; |
| |
| /* |
| * functions |
| */ |
| void init_kwb_image_type (void); |
| |
| /* |
| * Byte 8 of the image header contains the version number. In the v0 |
| * header, byte 8 was reserved, and always set to 0. In the v1 header, |
| * byte 8 has been changed to a proper field, set to 1. |
| */ |
| static inline unsigned int image_version(void *header) |
| { |
| unsigned char *ptr = header; |
| return ptr[8]; |
| } |
| |
| #endif /* _KWBIMAGE_H_ */ |