| /* |
| * Copyright 2012 Calxeda, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <common.h> |
| #include <ahci.h> |
| #include <asm/io.h> |
| |
| #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) |
| #define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2)) |
| #define CPHY_BASE 0xfff58000 |
| #define CPHY_WIDTH 0x1000 |
| #define CPHY_DTE_XS 5 |
| #define CPHY_MII 31 |
| #define SERDES_CR_CTL 0x80a0 |
| #define SERDES_CR_ADDR 0x80a1 |
| #define SERDES_CR_DATA 0x80a2 |
| #define CR_BUSY 0x0001 |
| #define CR_START 0x0001 |
| #define CR_WR_RDN 0x0002 |
| #define CPHY_TX_INPUT_STS 0x2001 |
| #define CPHY_RX_INPUT_STS 0x2002 |
| #define CPHY_SATA_TX_OVERRIDE_BIT 0x8000 |
| #define CPHY_SATA_RX_OVERRIDE_BIT 0x4000 |
| #define CPHY_TX_INPUT_OVERRIDE 0x2004 |
| #define CPHY_RX_INPUT_OVERRIDE 0x2005 |
| #define SPHY_LANE 0x100 |
| #define SPHY_HALF_RATE 0x0001 |
| #define CPHY_SATA_DPLL_MODE 0x0700 |
| #define CPHY_SATA_DPLL_SHIFT 8 |
| #define CPHY_SATA_TX_ATTEN 0x1c00 |
| #define CPHY_SATA_TX_ATTEN_SHIFT 10 |
| |
| #define HB_SREG_SATA_ATTEN 0xfff3cf24 |
| |
| #define SATA_PORT_BASE 0xffe08000 |
| #define SATA_VERSIONR 0xf8 |
| #define SATA_HB_VERSION 0x3332302a |
| |
| static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr) |
| { |
| u32 data; |
| writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); |
| data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); |
| return data; |
| } |
| |
| static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data) |
| { |
| writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); |
| writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); |
| } |
| |
| static u32 combo_phy_read(u8 phy, u32 addr) |
| { |
| u8 dev = CPHY_DTE_XS; |
| if (phy == 5) |
| dev = CPHY_MII; |
| while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| udelay(5); |
| __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); |
| __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START); |
| while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| udelay(5); |
| return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA); |
| } |
| |
| static void combo_phy_write(u8 phy, u32 addr, u32 data) |
| { |
| u8 dev = CPHY_DTE_XS; |
| if (phy == 5) |
| dev = CPHY_MII; |
| while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| udelay(5); |
| __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); |
| __combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data); |
| __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START); |
| } |
| |
| static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val) |
| { |
| u32 tmp; |
| tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); |
| tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| |
| tmp |= CPHY_SATA_RX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| |
| tmp &= ~CPHY_SATA_DPLL_MODE; |
| tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE; |
| combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| } |
| |
| static void cphy_tx_attenuation_override(u8 phy, u8 lane) |
| { |
| u32 val; |
| u32 tmp; |
| u8 shift; |
| |
| shift = ((phy == 5) ? 4 : lane) * 4; |
| |
| val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf; |
| |
| if (val & 0x8) |
| return; |
| |
| tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE); |
| tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| |
| tmp |= CPHY_SATA_TX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| |
| tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; |
| combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| } |
| |
| static void cphy_disable_port_overrides(u8 port) |
| { |
| u32 tmp; |
| u8 lane = 0, phy = 0; |
| |
| if (port == 0) |
| phy = 5; |
| else if (port < 5) |
| lane = port - 1; |
| else |
| return; |
| tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); |
| tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| |
| tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE); |
| tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; |
| combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| } |
| |
| void cphy_disable_overrides(void) |
| { |
| int i; |
| u32 port_map; |
| |
| port_map = readl(0xffe08000 + HOST_PORTS_IMPL); |
| for (i = 0; i < 5; i++) { |
| if (port_map & (1 << i)) |
| cphy_disable_port_overrides(i); |
| } |
| } |
| |
| static void cphy_override_lane(u8 port) |
| { |
| u32 tmp, k = 0; |
| u8 lane = 0, phy = 0; |
| |
| if (port == 0) |
| phy = 5; |
| else if (port < 5) |
| lane = port - 1; |
| else |
| return; |
| |
| do { |
| tmp = combo_phy_read(0, CPHY_RX_INPUT_STS + |
| lane * SPHY_LANE); |
| } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); |
| cphy_spread_spectrum_override(phy, lane, 3); |
| cphy_tx_attenuation_override(phy, lane); |
| } |
| |
| #define WAIT_MS_LINKUP 4 |
| |
| int ahci_link_up(struct ahci_probe_ent *probe_ent, int port) |
| { |
| u32 tmp; |
| int j = 0; |
| u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio; |
| u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) == |
| SATA_HB_VERSION ? 1 : 0; |
| |
| /* Bring up SATA link. |
| * SATA link bringup time is usually less than 1 ms; only very |
| * rarely has it taken between 1-2 ms. Never seen it above 2 ms. |
| */ |
| while (j < WAIT_MS_LINKUP) { |
| if (is_highbank && (j == 0)) { |
| cphy_disable_port_overrides(port); |
| writel(0x301, port_mmio + PORT_SCR_CTL); |
| udelay(1000); |
| writel(0x300, port_mmio + PORT_SCR_CTL); |
| udelay(1000); |
| cphy_override_lane(port); |
| } |
| |
| tmp = readl(port_mmio + PORT_SCR_STAT); |
| if ((tmp & 0xf) == 0x3) |
| return 0; |
| udelay(1000); |
| j++; |
| |
| if ((j == WAIT_MS_LINKUP) && (tmp & 0xf)) |
| j = 0; /* retry phy reset */ |
| } |
| return 1; |
| } |