| /* |
| * Keystone : Board initialization |
| * |
| * (C) Copyright 2014 |
| * Texas Instruments Incorporated, <www.ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "board.h" |
| #include <common.h> |
| #include <spl.h> |
| #include <exports.h> |
| #include <fdt_support.h> |
| #include <asm/arch/ddr3.h> |
| #include <asm/arch/psc_defs.h> |
| #include <asm/ti-common/ti-aemif.h> |
| #include <asm/ti-common/keystone_net.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct aemif_config aemif_configs[] = { |
| { /* CS0 */ |
| .mode = AEMIF_MODE_NAND, |
| .wr_setup = 0xf, |
| .wr_strobe = 0x3f, |
| .wr_hold = 7, |
| .rd_setup = 0xf, |
| .rd_strobe = 0x3f, |
| .rd_hold = 7, |
| .turn_around = 3, |
| .width = AEMIF_WIDTH_8, |
| }, |
| }; |
| |
| int dram_init(void) |
| { |
| ddr3_init(); |
| |
| gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_MAX_RAM_BANK_SIZE); |
| aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs); |
| return 0; |
| } |
| |
| int board_init(void) |
| { |
| gd->bd->bi_boot_params = CONFIG_LINUX_BOOT_PARAM_ADDR; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DRIVER_TI_KEYSTONE_NET |
| int get_eth_env_param(char *env_name) |
| { |
| char *env; |
| int res = -1; |
| |
| env = getenv(env_name); |
| if (env) |
| res = simple_strtol(env, NULL, 0); |
| |
| return res; |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| int j; |
| int res; |
| int port_num; |
| char link_type_name[32]; |
| |
| /* By default, select PA PLL clock as PA clock source */ |
| if (psc_enable_module(KS2_LPSC_PA)) |
| return -1; |
| if (psc_enable_module(KS2_LPSC_CPGMAC)) |
| return -1; |
| if (psc_enable_module(KS2_LPSC_CRYPTO)) |
| return -1; |
| |
| port_num = get_num_eth_ports(); |
| |
| for (j = 0; j < port_num; j++) { |
| sprintf(link_type_name, "sgmii%d_link_type", j); |
| res = get_eth_env_param(link_type_name); |
| if (res >= 0) |
| eth_priv_cfg[j].sgmii_link_type = res; |
| |
| keystone2_emac_initialize(ð_priv_cfg[j]); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| void spl_board_init(void) |
| { |
| spl_init_keystone_plls(); |
| preloader_console_init(); |
| } |
| |
| u32 spl_boot_device(void) |
| { |
| #if defined(CONFIG_SPL_SPI_LOAD) |
| return BOOT_DEVICE_SPI; |
| #else |
| puts("Unknown boot device\n"); |
| hang(); |
| #endif |
| } |
| #endif |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| int lpae; |
| char *env; |
| char *endp; |
| int nbanks; |
| u64 size[2]; |
| u64 start[2]; |
| char name[32]; |
| int nodeoffset; |
| u32 ddr3a_size; |
| int unitrd_fixup = 0; |
| |
| env = getenv("mem_lpae"); |
| lpae = env && simple_strtol(env, NULL, 0); |
| env = getenv("uinitrd_fixup"); |
| unitrd_fixup = env && simple_strtol(env, NULL, 0); |
| |
| ddr3a_size = 0; |
| if (lpae) { |
| env = getenv("ddr3a_size"); |
| if (env) |
| ddr3a_size = simple_strtol(env, NULL, 10); |
| if ((ddr3a_size != 8) && (ddr3a_size != 4)) |
| ddr3a_size = 0; |
| } |
| |
| nbanks = 1; |
| start[0] = bd->bi_dram[0].start; |
| size[0] = bd->bi_dram[0].size; |
| |
| /* adjust memory start address for LPAE */ |
| if (lpae) { |
| start[0] -= CONFIG_SYS_SDRAM_BASE; |
| start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; |
| } |
| |
| if ((size[0] == 0x80000000) && (ddr3a_size != 0)) { |
| size[1] = ((u64)ddr3a_size - 2) << 30; |
| start[1] = 0x880000000; |
| nbanks++; |
| } |
| |
| /* reserve memory at start of bank */ |
| sprintf(name, "mem_reserve_head"); |
| env = getenv(name); |
| if (env) { |
| start[0] += ustrtoul(env, &endp, 0); |
| size[0] -= ustrtoul(env, &endp, 0); |
| } |
| |
| sprintf(name, "mem_reserve"); |
| env = getenv(name); |
| if (env) |
| size[0] -= ustrtoul(env, &endp, 0); |
| |
| fdt_fixup_memory_banks(blob, start, size, nbanks); |
| |
| /* Fix up the initrd */ |
| if (lpae && unitrd_fixup) { |
| int err; |
| u32 *prop1, *prop2; |
| u64 initrd_start, initrd_end; |
| |
| nodeoffset = fdt_path_offset(blob, "/chosen"); |
| if (nodeoffset >= 0) { |
| prop1 = (u32 *)fdt_getprop(blob, nodeoffset, |
| "linux,initrd-start", NULL); |
| prop2 = (u32 *)fdt_getprop(blob, nodeoffset, |
| "linux,initrd-end", NULL); |
| if (prop1 && prop2) { |
| initrd_start = __be32_to_cpu(*prop1); |
| initrd_start -= CONFIG_SYS_SDRAM_BASE; |
| initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; |
| initrd_start = __cpu_to_be64(initrd_start); |
| initrd_end = __be32_to_cpu(*prop2); |
| initrd_end -= CONFIG_SYS_SDRAM_BASE; |
| initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; |
| initrd_end = __cpu_to_be64(initrd_end); |
| |
| err = fdt_delprop(blob, nodeoffset, |
| "linux,initrd-start"); |
| if (err < 0) |
| puts("error deleting initrd-start\n"); |
| |
| err = fdt_delprop(blob, nodeoffset, |
| "linux,initrd-end"); |
| if (err < 0) |
| puts("error deleting initrd-end\n"); |
| |
| err = fdt_setprop(blob, nodeoffset, |
| "linux,initrd-start", |
| &initrd_start, |
| sizeof(initrd_start)); |
| if (err < 0) |
| puts("error adding initrd-start\n"); |
| |
| err = fdt_setprop(blob, nodeoffset, |
| "linux,initrd-end", |
| &initrd_end, |
| sizeof(initrd_end)); |
| if (err < 0) |
| puts("error adding linux,initrd-end\n"); |
| } |
| } |
| } |
| } |
| |
| void ft_board_setup_ex(void *blob, bd_t *bd) |
| { |
| int lpae; |
| u64 size; |
| char *env; |
| u64 *reserve_start; |
| |
| env = getenv("mem_lpae"); |
| lpae = env && simple_strtol(env, NULL, 0); |
| |
| if (lpae) { |
| /* |
| * the initrd and other reserved memory areas are |
| * embedded in in the DTB itslef. fix up these addresses |
| * to 36 bit format |
| */ |
| reserve_start = (u64 *)((char *)blob + |
| fdt_off_mem_rsvmap(blob)); |
| while (1) { |
| *reserve_start = __cpu_to_be64(*reserve_start); |
| size = __cpu_to_be64(*(reserve_start + 1)); |
| if (size) { |
| *reserve_start -= CONFIG_SYS_SDRAM_BASE; |
| *reserve_start += |
| CONFIG_SYS_LPAE_SDRAM_BASE; |
| *reserve_start = |
| __cpu_to_be64(*reserve_start); |
| } else { |
| break; |
| } |
| reserve_start += 2; |
| } |
| } |
| } |
| #endif |