blob: a93a2fa0d6b90ffc815a2836f3205b78a38b69ff [file] [log] [blame]
/*
* Configuration settings for quick boot from MMC on OMAP3 EVM.
*
* Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Author :
* Sanjeev Premi <premi@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __OMAP3_EVM_QUICK_MMC_H
#define __OMAP3_EVM_QUICK_MMC_H
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
/* ----------------------------------------------------------------------------
* Supported U-Boot commands
* ----------------------------------------------------------------------------
*/
/*
* Board revision is detected by probing the Ethernet chip.
*
* When revision is statically configured via CONFIG_STATIC_BOARD_REV,
* this option can be removed. Generated binary is leaner by ~16Kbytes.
*/
/* ----------------------------------------------------------------------------
* Supported U-Boot features
* ----------------------------------------------------------------------------
*/
#define CONFIG_SILENT_CONSOLE
#define CONFIG_ENV_IS_NOWHERE
/* ----------------------------------------------------------------------------
* Supported hardware
* ----------------------------------------------------------------------------
*/
/* MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION
/* -----------------------------------------------------------------------------
* Include common board configuration
* -----------------------------------------------------------------------------
*/
#include "omap3_evm_common.h"
/* -----------------------------------------------------------------------------
* Default environment
* -----------------------------------------------------------------------------
*/
#define CONFIG_BOOTDELAY 0
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"silent=1"
#define CONFIG_BOOTCOMMAND \
"mmc rescan 0; " \
"fatload mmc 0 0x82000000 uImage; " \
"bootm 0x82000000;"
/*
* Update the bootargs as necessary e.g. size of memory, partition and fstype
*/
#define CONFIG_BOOTARGS \
"quiet " \
"console=ttyO0,115200n8 " \
"mem=128M " \
"noinitrd " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait"
/*
* SPL
*/
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif /* __OMAP3_EVM_QUICK_MMC_H */