blob: 08ec179346e29d0dd3cb7da44b25b34d82e05a77 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Cr50 / H1 TPM support
*
* Copyright 2018 Google LLC
*/
#define LOG_CATEGORY UCLASS_TPM
#include <dm.h>
#include <i2c.h>
#include <irq.h>
#include <log.h>
#include <spl.h>
#include <time.h>
#include <tpm-common.h>
#include <tpm-v2.h>
#include <acpi/acpigen.h>
#include <acpi/acpi_device.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <dm/acpi.h>
enum {
TIMEOUT_INIT_MS = 30000, /* Very long timeout for TPM init */
TIMEOUT_LONG_US = 2 * 1000 * 1000,
TIMEOUT_SHORT_US = 2 * 1000,
TIMEOUT_NO_IRQ_US = 20 * 1000,
TIMEOUT_IRQ_US = 100 * 1000,
};
enum {
CR50_DID_VID = 0x00281ae0L
};
enum {
CR50_MAX_BUF_SIZE = 63,
};
/*
* Operations specific to the Cr50 TPM used on Chromium OS and Android devices
*
* FIXME: below is not enough to differentiate between vendors commands
* of numerous devices. However, the current tpm2 APIs aren't very amenable
* to extending generically because the marshaling code is assuming all
* knowledge of all commands.
*/
#define TPM2_CC_VENDOR_BIT_MASK 0x20000000
#define TPM2_CR50_VENDOR_COMMAND (TPM2_CC_VENDOR_BIT_MASK | 0)
#define TPM2_CR50_SUB_CMD_IMMEDIATE_RESET 19
#define TPM2_CR50_SUB_CMD_NVMEM_ENABLE_COMMITS 21
#define TPM2_CR50_SUB_CMD_REPORT_TPM_STATE 23
#define TPM2_CR50_SUB_CMD_TURN_UPDATE_ON 24
#define TPM2_CR50_SUB_CMD_GET_REC_BTN 29
#define TPM2_CR50_SUB_CMD_TPM_MODE 40
#define TPM2_CR50_SUB_CMD_GET_BOOT_MODE 52
#define TPM2_CR50_SUB_CMD_RESET_EC 53
/* Cr50 vendor-specific error codes. */
#define VENDOR_RC_ERR 0x00000500
enum cr50_vendor_rc {
VENDOR_RC_INTERNAL_ERROR = (VENDOR_RC_ERR | 6),
VENDOR_RC_NO_SUCH_SUBCOMMAND = (VENDOR_RC_ERR | 8),
VENDOR_RC_NO_SUCH_COMMAND = (VENDOR_RC_ERR | 127),
};
enum cr50_tpm_mode {
/*
* Default state: TPM is enabled, and may be set to either
* TPM_MODE_ENABLED or TPM_MODE_DISABLED.
*/
TPM_MODE_ENABLED_TENTATIVE = 0,
/* TPM is enabled, and mode may not be changed. */
TPM_MODE_ENABLED = 1,
/* TPM is disabled, and mode may not be changed. */
TPM_MODE_DISABLED = 2,
TPM_MODE_INVALID,
};
/**
* struct cr50_priv - Private driver data
*
* @ready_gpio: GPIO to use to check if the TPM is ready
* @irq: IRQ to use check if the TPM is ready (has priority over @ready_gpio)
* @locality: Currenttly claimed locality (-1 if none)
* @vendor: vendor: Vendor ID for TPM
* @use_irq: true to use @irq, false to use @ready if available
*/
struct cr50_priv {
struct gpio_desc ready_gpio;
struct irq irq;
int locality;
uint vendor;
bool use_irq;
};
/*
* The below structure represents the body of the response to the 'report tpm
* state' vendor command.
*
* It is transferred over the wire, so it needs to be serialized/deserialized,
* and it is likely to change, so its contents must be versioned.
*/
#define TPM_STATE_VERSION 1
struct tpm_vendor_state {
u32 version;
/*
* The following three fields are set by the TPM in case of an assert.
* There is no other processing than setting the source code line
* number, error code and the first 4 characters of the function name.
*
* We don't expect this happening, but it is included in the report
* just in case.
*/
u32 fail_line; /* s_failLIne */
u32 fail_code; /* s_failCode */
char func_name[4]; /* s_failFunction, limited to 4 chars */
/*
* The following two fields are the current time filtered value of the
* 'failed tries' TPM counter, and the maximum allowed value of the
* counter.
*
* failed_tries == max_tries is the definition of the TPM lockout
* condition.
*/
u32 failed_tries; /* gp.failedTries */
u32 max_tries; /* gp.maxTries */
/* The below fields are present in version 2 and above */
};
/* Wait for interrupt to indicate TPM is ready */
static int cr50_i2c_wait_tpm_ready(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
ulong timeout, base;
int i;
if (!priv->use_irq && !dm_gpio_is_valid(&priv->ready_gpio)) {
/* Fixed delay if interrupt not supported */
udelay(TIMEOUT_NO_IRQ_US);
return 0;
}
base = timer_get_us();
timeout = base + TIMEOUT_IRQ_US;
i = 0;
while (priv->use_irq ? !irq_read_and_clear(&priv->irq) :
!dm_gpio_get_value(&priv->ready_gpio)) {
i++;
if ((int)(timer_get_us() - timeout) >= 0) {
log_warning("Timeout\n");
/* Use this instead of the -ETIMEDOUT used by i2c */
return -ETIME;
}
}
log_debug("i=%d\n", i);
return 0;
}
/* Clear pending interrupts */
static void cr50_i2c_clear_tpm_irq(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
if (priv->use_irq)
irq_read_and_clear(&priv->irq);
}
/*
* cr50_i2c_read() - read from TPM register
*
* @dev: TPM chip information
* @addr: register address to read from
* @buffer: provided by caller
* @len: number of bytes to read
*
* 1) send register address byte 'addr' to the TPM
* 2) wait for TPM to indicate it is ready
* 3) read 'len' bytes of TPM response into the provided 'buffer'
*
* Return 0 on success. -ve on error
*/
static int cr50_i2c_read(struct udevice *dev, u8 addr, u8 *buffer,
size_t len)
{
int ret;
/* Clear interrupt before starting transaction */
cr50_i2c_clear_tpm_irq(dev);
/* Send the register address byte to the TPM */
ret = dm_i2c_write(dev, 0, &addr, 1);
if (ret) {
log_err("Address write failed (err=%d)\n", ret);
return ret;
}
/* Wait for TPM to be ready with response data */
ret = cr50_i2c_wait_tpm_ready(dev);
if (ret)
return ret;
/* Read response data frrom the TPM */
ret = dm_i2c_read(dev, 0, buffer, len);
if (ret) {
log_err("Read response failed (err=%d)\n", ret);
return ret;
}
return 0;
}
/*
* cr50_i2c_write() - write to TPM register
*
* @dev: TPM chip information
* @addr: register address to write to
* @buffer: data to write
* @len: number of bytes to write
*
* 1) prepend the provided address to the provided data
* 2) send the address+data to the TPM
* 3) wait for TPM to indicate it is done writing
*
* Returns -1 on error, 0 on success.
*/
static int cr50_i2c_write(struct udevice *dev, u8 addr, const u8 *buffer,
size_t len)
{
u8 buf[len + 1];
int ret;
if (len > CR50_MAX_BUF_SIZE) {
log_err("Length %zd is too large\n", len);
return -E2BIG;
}
/* Prepend the 'register address' to the buffer */
buf[0] = addr;
memcpy(buf + 1, buffer, len);
/* Clear interrupt before starting transaction */
cr50_i2c_clear_tpm_irq(dev);
/* Send write request buffer with address */
ret = dm_i2c_write(dev, 0, buf, len + 1);
if (ret) {
log_err("Error writing to TPM (err=%d)\n", ret);
return ret;
}
/* Wait for TPM to be ready */
return cr50_i2c_wait_tpm_ready(dev);
}
static inline u8 tpm_access(int locality)
{
if (locality == -1)
locality = 0;
return 0x0 | (locality << 4);
}
static inline u8 tpm_sts(int locality)
{
if (locality == -1)
locality = 0;
return 0x1 | (locality << 4);
}
static inline u8 tpm_data_fifo(int locality)
{
if (locality == -1)
locality = 0;
return 0x5 | (locality << 4);
}
static inline u8 tpm_did_vid(int locality)
{
if (locality == -1)
locality = 0;
return 0x6 | (locality << 4);
}
static int release_locality(struct udevice *dev, int force)
{
struct cr50_priv *priv = dev_get_priv(dev);
u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_REQUEST_PENDING;
u8 addr = tpm_access(priv->locality);
int ret;
u8 buf;
ret = cr50_i2c_read(dev, addr, &buf, 1);
if (ret)
return ret;
if (force || (buf & mask) == mask) {
buf = TPM_ACCESS_ACTIVE_LOCALITY;
cr50_i2c_write(dev, addr, &buf, 1);
}
priv->locality = -1;
return 0;
}
/* cr50 requires all 4 bytes of status register to be read */
static int cr50_i2c_status(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
u8 buf[4];
int ret;
ret = cr50_i2c_read(dev, tpm_sts(priv->locality), buf, sizeof(buf));
if (ret) {
log_warning("%s: Failed to read status\n", __func__);
return ret;
}
return buf[0];
}
/* cr50 requires all 4 bytes of status register to be written */
static int cr50_i2c_ready(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
u8 buf[4] = { TPM_STS_COMMAND_READY };
int ret;
ret = cr50_i2c_write(dev, tpm_sts(priv->locality), buf, sizeof(buf));
if (ret)
return ret;
udelay(TIMEOUT_SHORT_US);
return 0;
}
static int cr50_i2c_wait_burststs(struct udevice *dev, u8 mask,
size_t *burst, int *status)
{
struct cr50_priv *priv = dev_get_priv(dev);
ulong timeout;
u32 buf;
/*
* cr50 uses bytes 3:2 of status register for burst count and all 4
* bytes must be read
*/
timeout = timer_get_us() + TIMEOUT_LONG_US;
while (timer_get_us() < timeout) {
if (cr50_i2c_read(dev, tpm_sts(priv->locality),
(u8 *)&buf, sizeof(buf)) < 0) {
udelay(TIMEOUT_SHORT_US);
continue;
}
*status = buf & 0xff;
*burst = le16_to_cpu((buf >> 8) & 0xffff);
if ((*status & mask) == mask &&
*burst > 0 && *burst <= CR50_MAX_BUF_SIZE)
return 0;
udelay(TIMEOUT_SHORT_US);
}
log_warning("Timeout reading burst and status\n");
return -ETIMEDOUT;
}
static int cr50_i2c_recv(struct udevice *dev, u8 *buf, size_t buf_len)
{
struct cr50_priv *priv = dev_get_priv(dev);
size_t burstcnt, expected, current, len;
u8 addr = tpm_data_fifo(priv->locality);
u8 mask = TPM_STS_VALID | TPM_STS_DATA_AVAIL;
u32 expected_buf;
int status;
int ret;
log_debug("%s: buf_len=%x\n", __func__, buf_len);
if (buf_len < TPM_HEADER_SIZE)
return -E2BIG;
ret = cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status);
if (ret < 0) {
log_warning("First chunk not available\n");
goto out_err;
}
/* Read first chunk of burstcnt bytes */
if (cr50_i2c_read(dev, addr, buf, burstcnt) < 0) {
log_warning("Read failed\n");
goto out_err;
}
/* Determine expected data in the return buffer */
memcpy(&expected_buf, buf + TPM_CMD_COUNT_OFFSET, sizeof(expected_buf));
expected = be32_to_cpu(expected_buf);
if (expected > buf_len) {
log_warning("Too much data: %zu > %zu\n", expected, buf_len);
goto out_err;
}
/* Now read the rest of the data */
current = burstcnt;
while (current < expected) {
/* Read updated burst count and check status */
if (cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status) < 0) {
log_warning("- burst failure1\n");
goto out_err;
}
len = min(burstcnt, expected - current);
if (cr50_i2c_read(dev, addr, buf + current, len) != 0) {
log_warning("Read failed\n");
goto out_err;
}
current += len;
}
if (cr50_i2c_wait_burststs(dev, TPM_STS_VALID, &burstcnt,
&status) < 0) {
log_warning("- burst failure2\n");
goto out_err;
}
if (status & TPM_STS_DATA_AVAIL) {
log_warning("Data still available\n");
goto out_err;
}
return current;
out_err:
/* Abort current transaction if still pending */
ret = cr50_i2c_status(dev);
if (ret < 0)
return ret;
if (ret & TPM_STS_COMMAND_READY) {
ret = cr50_i2c_ready(dev);
if (ret)
return ret;
}
return -EIO;
}
static int cr50_i2c_send(struct udevice *dev, const u8 *buf, size_t len)
{
struct cr50_priv *priv = dev_get_priv(dev);
int status;
size_t burstcnt, limit, sent = 0;
u8 tpm_go[4] = { TPM_STS_GO };
ulong timeout;
int ret;
log_debug("len=%x\n", len);
timeout = timer_get_us() + TIMEOUT_LONG_US;
do {
ret = cr50_i2c_status(dev);
if (ret < 0)
goto out_err;
if (ret & TPM_STS_COMMAND_READY)
break;
if (timer_get_us() > timeout)
goto out_err;
ret = cr50_i2c_ready(dev);
if (ret)
goto out_err;
} while (1);
while (len > 0) {
u8 mask = TPM_STS_VALID;
/* Wait for data if this is not the first chunk */
if (sent > 0)
mask |= TPM_STS_DATA_EXPECT;
if (cr50_i2c_wait_burststs(dev, mask, &burstcnt, &status) < 0)
goto out_err;
/*
* Use burstcnt - 1 to account for the address byte
* that is inserted by cr50_i2c_write()
*/
limit = min(burstcnt - 1, len);
if (cr50_i2c_write(dev, tpm_data_fifo(priv->locality),
&buf[sent], limit) != 0) {
log_warning("Write failed\n");
goto out_err;
}
sent += limit;
len -= limit;
}
/* Ensure TPM is not expecting more data */
if (cr50_i2c_wait_burststs(dev, TPM_STS_VALID, &burstcnt, &status) < 0)
goto out_err;
if (status & TPM_STS_DATA_EXPECT) {
log_warning("Data still expected\n");
goto out_err;
}
/* Start the TPM command */
ret = cr50_i2c_write(dev, tpm_sts(priv->locality), tpm_go,
sizeof(tpm_go));
if (ret) {
log_warning("Start command failed\n");
goto out_err;
}
return sent;
out_err:
/* Abort current transaction if still pending */
ret = cr50_i2c_status(dev);
if (ret < 0 || (ret & TPM_STS_COMMAND_READY)) {
ret = cr50_i2c_ready(dev);
if (ret)
return ret;
}
return -EIO;
}
/**
* process_reset() - Wait for the Cr50 to reset
*
* Cr50 processes reset requests asynchronously and conceivably could be busy
* executing a long command and not reacting to the reset pulse for a while.
*
* This function will make sure that the AP does not proceed with boot until
* TPM finished reset processing.
*
* @dev: Cr50 device
* Return: 0 if OK, -EPERM if locality could not be taken
*/
static int process_reset(struct udevice *dev)
{
const int loc = 0;
u8 access;
ulong start;
/*
* Locality is released by TPM reset.
*
* If locality is taken at this point, this could be due to the fact
* that the TPM is performing a long operation and has not processed
* reset request yet. We'll wait up to CR50_TIMEOUT_INIT_MS and see if
* it releases locality when reset is processed.
*/
start = get_timer(0);
do {
const u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY;
int ret;
ret = cr50_i2c_read(dev, tpm_access(loc),
&access, sizeof(access));
if (ret || ((access & mask) == mask)) {
/*
* Don't bombard the chip with traffic; let it keep
* processing the command.
*/
mdelay(2);
continue;
}
log_debug("TPM ready after %ld ms\n", get_timer(start));
return 0;
} while (get_timer(start) < TIMEOUT_INIT_MS);
log_err("TPM failed to reset after %ld ms, status: %#x\n",
get_timer(start), access);
return -EPERM;
}
/*
* Locality could be already claimed (if this is a later U-Boot phase and the
* read-only U-Boot did not release it), or not yet claimed, if this is TPL or
* the older read-only U-Boot did release it.
*/
static int claim_locality(struct udevice *dev, int loc)
{
const u8 mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY;
struct cr50_priv *priv = dev_get_priv(dev);
u8 access;
int ret;
ret = cr50_i2c_read(dev, tpm_access(loc), &access, sizeof(access));
if (ret)
return log_msg_ret("read1", ret);
if ((access & mask) == mask) {
log_warning("Locality already claimed\n");
return 0;
}
access = TPM_ACCESS_REQUEST_USE;
ret = cr50_i2c_write(dev, tpm_access(loc), &access, sizeof(access));
if (ret)
return log_msg_ret("write", ret);
ret = cr50_i2c_read(dev, tpm_access(loc), &access, sizeof(access));
if (ret)
return log_msg_ret("read2", ret);
if ((access & mask) != mask) {
log_err("Failed to claim locality\n");
return -EPERM;
}
log_debug("Claimed locality %d\n", loc);
priv->locality = loc;
return 0;
}
static int cr50_i2c_get_desc(struct udevice *dev, char *buf, int size)
{
struct dm_i2c_chip *chip = dev_get_parent_plat(dev);
struct cr50_priv *priv = dev_get_priv(dev);
int len;
len = snprintf(buf, size, "cr50 TPM 2.0 (i2c %02x id %x), ",
chip->chip_addr, priv->vendor >> 16);
if (priv->use_irq) {
len += snprintf(buf + len, size - len, "irq=%s/%ld",
priv->irq.dev->name, priv->irq.id);
} else if (dm_gpio_is_valid(&priv->ready_gpio)) {
len += snprintf(buf + len, size - len, "gpio=%s/%u",
priv->ready_gpio.dev->name,
priv->ready_gpio.offset);
} else {
len += snprintf(buf + len, size - len, "delay=%d",
TIMEOUT_NO_IRQ_US);
}
return len;
}
static int stringify_state(char *buf, int len, char *str, size_t max_size)
{
struct tpm_vendor_state state;
size_t text_size = 0;
state.version = get_unaligned_be32(buf +
offsetof(struct tpm_vendor_state, version));
state.fail_line = get_unaligned_be32(buf +
offsetof(struct tpm_vendor_state, fail_line));
state.fail_code = get_unaligned_be32(buf +
offsetof(struct tpm_vendor_state, fail_code));
memcpy(state.func_name,
buf + offsetof(struct tpm_vendor_state, func_name),
sizeof(state.func_name));
state.failed_tries = get_unaligned_be32(buf +
offsetof(struct tpm_vendor_state, failed_tries));
state.max_tries = get_unaligned_be32(buf +
offsetof(struct tpm_vendor_state, max_tries));
text_size += snprintf(str + text_size, max_size - text_size,
"v=%d", state.version);
if (text_size >= max_size)
return -ENOSPC;
if (state.version > TPM_STATE_VERSION)
text_size += snprintf(str + text_size,
max_size - text_size,
" not fully supported\n");
if (text_size >= max_size)
return -ENOSPC;
if (state.version == 0)
return -EINVAL; /* This should never happen */
text_size += snprintf(str + text_size,
max_size - text_size,
" failed_tries=%d max_tries=%d\n",
state.failed_tries, state.max_tries);
if (text_size >= max_size)
return -ENOSPC;
if (state.fail_line) {
/* make sure function name is zero terminated. */
char func_name[sizeof(state.func_name) + 1];
memcpy(func_name, state.func_name, sizeof(state.func_name));
func_name[sizeof(state.func_name)] = '\0';
text_size += snprintf(str + text_size,
max_size - text_size,
"tpm failed: f %s line %d code %d",
func_name,
state.fail_line,
state.fail_code);
if (text_size >= max_size)
return -ENOSPC;
}
return 0;
}
static int cr50_i2c_report_state(struct udevice *dev, char *str, int str_max)
{
char buf[50];
size_t buf_size = sizeof(buf);
int ret;
ret = tpm2_report_state(dev, TPM2_CR50_VENDOR_COMMAND,
TPM2_CR50_SUB_CMD_REPORT_TPM_STATE,
buf, &buf_size);
if (ret)
return ret;
/* TPM responded as expected */
ret = stringify_state(buf, buf_size, str, str_max);
if (ret)
return ret;
return 0;
}
static int cr50_i2c_open(struct udevice *dev)
{
char buf[80];
int ret;
ret = process_reset(dev);
if (ret)
return log_msg_ret("reset", ret);
ret = claim_locality(dev, 0);
if (ret)
return log_msg_ret("claim", ret);
cr50_i2c_get_desc(dev, buf, sizeof(buf));
log_debug("%s\n", buf);
return 0;
}
static int cr50_i2c_cleanup(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
log_debug("cleanup %d\n", priv->locality);
if (priv->locality != -1)
release_locality(dev, 1);
return 0;
}
static int cr50_acpi_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
{
char scope[ACPI_PATH_MAX];
char name[ACPI_NAME_MAX];
const char *hid;
int ret;
ret = acpi_device_scope(dev, scope, sizeof(scope));
if (ret)
return log_msg_ret("scope", ret);
ret = acpi_get_name(dev, name);
if (ret)
return log_msg_ret("name", ret);
hid = dev_read_string(dev, "acpi,hid");
if (!hid)
return log_msg_ret("hid", ret);
/* Device */
acpigen_write_scope(ctx, scope);
acpigen_write_device(ctx, name);
acpigen_write_name_string(ctx, "_HID", hid);
acpigen_write_name_integer(ctx, "_UID",
dev_read_u32_default(dev, "acpi,uid", 0));
acpigen_write_name_string(ctx, "_DDN",
dev_read_string(dev, "acpi,ddn"));
acpigen_write_sta(ctx, acpi_device_status(dev));
/* Resources */
acpigen_write_name(ctx, "_CRS");
acpigen_write_resourcetemplate_header(ctx);
ret = acpi_device_write_i2c_dev(ctx, dev);
if (ret < 0)
return log_msg_ret("i2c", ret);
ret = acpi_device_write_interrupt_or_gpio(ctx, (struct udevice *)dev,
"ready-gpios");
if (ret < 0)
return log_msg_ret("irq_gpio", ret);
acpigen_write_resourcetemplate_footer(ctx);
acpigen_pop_len(ctx); /* Device */
acpigen_pop_len(ctx); /* Scope */
return 0;
}
enum {
TPM_TIMEOUT_MS = 5,
SHORT_TIMEOUT_MS = 750,
LONG_TIMEOUT_MS = 2000,
};
static int cr50_i2c_of_to_plat(struct udevice *dev)
{
struct tpm_chip_priv *upriv = dev_get_uclass_priv(dev);
struct cr50_priv *priv = dev_get_priv(dev);
struct irq irq;
int ret;
upriv->version = TPM_V2;
upriv->duration_ms[TPM_SHORT] = SHORT_TIMEOUT_MS;
upriv->duration_ms[TPM_MEDIUM] = LONG_TIMEOUT_MS;
upriv->duration_ms[TPM_LONG] = LONG_TIMEOUT_MS;
upriv->retry_time_ms = TPM_TIMEOUT_MS;
upriv->pcr_count = 32;
upriv->pcr_select_min = 2;
/* Optional GPIO to track when cr50 is ready */
ret = irq_get_by_index(dev, 0, &irq);
if (!ret) {
priv->irq = irq;
priv->use_irq = true;
} else {
ret = gpio_request_by_name(dev, "ready-gpios", 0,
&priv->ready_gpio, GPIOD_IS_IN);
if (ret) {
log_warning("Cr50 does not have an ready GPIO/interrupt (err=%d)\n",
ret);
}
}
return 0;
}
static int cr50_i2c_probe(struct udevice *dev)
{
struct cr50_priv *priv = dev_get_priv(dev);
u32 vendor = 0;
ulong start;
/*
* 150ms should be enough to synchronise with the TPM even under the
* worst nested-reset-request conditions. In the vast majority of cases
* there will be no wait at all.
*/
start = get_timer(0);
while (get_timer(start) < 150) {
int ret;
/* Exit once DID and VID verified */
ret = cr50_i2c_read(dev, tpm_did_vid(0), (u8 *)&vendor, 4);
if (!ret && vendor == CR50_DID_VID)
break;
/* TPM might be resetting; let's retry in a bit */
mdelay(10);
}
if (vendor != CR50_DID_VID) {
log_warning("DID_VID %08x not recognised\n", vendor);
return log_msg_ret("vendor-id", -EXDEV);
}
priv->vendor = vendor;
priv->locality = -1;
log_debug("Cr50 ready\n");
return 0;
}
struct acpi_ops cr50_acpi_ops = {
.fill_ssdt = cr50_acpi_fill_ssdt,
};
static const struct tpm_ops cr50_i2c_ops = {
.open = cr50_i2c_open,
.get_desc = cr50_i2c_get_desc,
.report_state = cr50_i2c_report_state,
.send = cr50_i2c_send,
.recv = cr50_i2c_recv,
.cleanup = cr50_i2c_cleanup,
};
static const struct udevice_id cr50_i2c_ids[] = {
{ .compatible = "google,cr50" },
{ }
};
U_BOOT_DRIVER(google_cr50) = {
.name = "google_cr50",
.id = UCLASS_TPM,
.of_match = cr50_i2c_ids,
.ops = &cr50_i2c_ops,
.of_to_plat = cr50_i2c_of_to_plat,
.probe = cr50_i2c_probe,
.remove = cr50_i2c_cleanup,
.priv_auto = sizeof(struct cr50_priv),
ACPI_OPS_PTR(&cr50_acpi_ops)
.flags = DM_FLAG_OS_PREPARE,
};