drivers/gpio/pca953x.c - github/trini/u-boot - Gitiles

 /*
  * Copyright 2008 Extreme Engineering Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * Version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * Driver for NXP's 4, 8 and 16 bit I2C gpio expanders (eg pca9537, pca9557,
  * pca9539, etc)
  */

 #include <common.h>
 #include <i2c.h>
 #include <pca953x.h>

 /* Default to an address that hopefully won't corrupt other i2c devices */
 #ifndef CONFIG_SYS_I2C_PCA953X_ADDR
 #define CONFIG_SYS_I2C_PCA953X_ADDR	(~0)
 #endif

 enum {
 	PCA953X_CMD_INFO,
 	PCA953X_CMD_DEVICE,
 	PCA953X_CMD_OUTPUT,
 	PCA953X_CMD_INPUT,
 	PCA953X_CMD_INVERT,
 };

 #ifdef CONFIG_SYS_I2C_PCA953X_WIDTH
 struct pca953x_chip_ngpio {
 	uint8_t chip;
 	uint8_t ngpio;
 };

 static struct pca953x_chip_ngpio pca953x_chip_ngpios[] =
     CONFIG_SYS_I2C_PCA953X_WIDTH;

 #define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \
 			sizeof(struct pca953x_chip_ngpio))

 /*
  * Determine the number of GPIO pins supported. If we don't know we assume
  * 8 pins.
  */
 static int pca953x_ngpio(uint8_t chip)
 {
 	int i;

 	for (i = 0; i < NUM_CHIP_GPIOS; i++)
 		if (pca953x_chip_ngpios[i].chip == chip)
 			return pca953x_chip_ngpios[i].ngpio;

 	return 8;
 }
 #else
 static int pca953x_ngpio(uint8_t chip)
 {
 	return 8;
 }
 #endif

 /*
  * Modify masked bits in register
  */
 static int pca953x_reg_write(uint8_t chip, uint addr, uint mask, uint data)
 {
 	uint8_t valb;
 	uint16_t valw;

 	if (pca953x_ngpio(chip) <= 8) {
 		if (i2c_read(chip, addr, 1, &valb, 1))
 			return -1;

 		valb &= ~mask;
 		valb |= data;

 		return i2c_write(chip, addr, 1, &valb, 1);
 	} else {
 		if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
 			return -1;

 		valw &= ~mask;
 		valw |= data;

 		return i2c_write(chip, addr << 1, 1, (u8*)&valw, 2);
 	}
 }

 static int pca953x_reg_read(uint8_t chip, uint addr, uint *data)
 {
 	uint8_t valb;
 	uint16_t valw;

 	if (pca953x_ngpio(chip) <= 8) {
 		if (i2c_read(chip, addr, 1, &valb, 1))
 			return -1;
 		*data = (int)valb;
 	} else {
 		if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
 			return -1;
 		*data = (int)valw;
 	}
 	return 0;
 }

 /*
  * Set output value of IO pins in 'mask' to corresponding value in 'data'
  * 0 = low, 1 = high
  */
 int pca953x_set_val(uint8_t chip, uint mask, uint data)
 {
 	return pca953x_reg_write(chip, PCA953X_OUT, mask, data);
 }

 /*
  * Set read polarity of IO pins in 'mask' to corresponding value in 'data'
  * 0 = read pin value, 1 = read inverted pin value
  */
 int pca953x_set_pol(uint8_t chip, uint mask, uint data)
 {
 	return pca953x_reg_write(chip, PCA953X_POL, mask, data);
 }

 /*
  * Set direction of IO pins in 'mask' to corresponding value in 'data'
  * 0 = output, 1 = input
  */
 int pca953x_set_dir(uint8_t chip, uint mask, uint data)
 {
 	return pca953x_reg_write(chip, PCA953X_CONF, mask, data);
 }

 /*
  * Read current logic level of all IO pins
  */
 int pca953x_get_val(uint8_t chip)
 {
 	uint val;

 	if (pca953x_reg_read(chip, PCA953X_IN, &val) < 0)
 		return -1;

 	return (int)val;
 }

 #ifdef CONFIG_CMD_PCA953X
 #ifdef CONFIG_CMD_PCA953X_INFO
 /*
  * Display pca953x information
  */
 static int pca953x_info(uint8_t chip)
 {
 	int i;
 	uint data;
 	int nr_gpio = pca953x_ngpio(chip);
 	int msb = nr_gpio - 1;

 	printf("pca953x@ 0x%x (%d pins):\n\n", chip, nr_gpio);
 	printf("gpio pins: ");
 	for (i = msb; i >= 0; i--)
 		printf("%x", i);
 	printf("\n");
 	for (i = 11 + nr_gpio; i > 0; i--)
 		printf("-");
 	printf("\n");

 	if (pca953x_reg_read(chip, PCA953X_CONF, &data) < 0)
 		return -1;
 	printf("conf:      ");
 	for (i = msb; i >= 0; i--)
 		printf("%c", data & (1 << i) ? 'i' : 'o');
 	printf("\n");

 	if (pca953x_reg_read(chip, PCA953X_POL, &data) < 0)
 		return -1;
 	printf("invert:    ");
 	for (i = msb; i >= 0; i--)
 		printf("%c", data & (1 << i) ? '1' : '0');
 	printf("\n");

 	if (pca953x_reg_read(chip, PCA953X_IN, &data) < 0)
 		return -1;
 	printf("input:     ");
 	for (i = msb; i >= 0; i--)
 		printf("%c", data & (1 << i) ? '1' : '0');
 	printf("\n");

 	if (pca953x_reg_read(chip, PCA953X_OUT, &data) < 0)
 		return -1;
 	printf("output:    ");
 	for (i = msb; i >= 0; i--)
 		printf("%c", data & (1 << i) ? '1' : '0');
 	printf("\n");

 	return 0;
 }
 #endif /* CONFIG_CMD_PCA953X_INFO */

 cmd_tbl_t cmd_pca953x[] = {
 	U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""),
 	U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""),
 	U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""),
 	U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""),
 #ifdef CONFIG_CMD_PCA953X_INFO
 	U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""),
 #endif
 };

 int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR;
 	int val;
 	ulong ul_arg2 = 0;
 	ulong ul_arg3 = 0;
 	cmd_tbl_t *c;

 	c = find_cmd_tbl(argv[1], cmd_pca953x, ARRAY_SIZE(cmd_pca953x));

 	/* All commands but "device" require 'maxargs' arguments */
 	if (!c || !((argc == (c->maxargs)) ||
 		(((int)c->cmd == PCA953X_CMD_DEVICE) &&
 		 (argc == (c->maxargs - 1))))) {
 		return cmd_usage(cmdtp);
 	}

 	/* arg2 used as chip number or pin number */
 	if (argc > 2)
 		ul_arg2 = simple_strtoul(argv[2], NULL, 16);

 	/* arg3 used as pin or invert value */
 	if (argc > 3)
 		ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;

 	switch ((int)c->cmd) {
 #ifdef CONFIG_CMD_PCA953X_INFO
 	case PCA953X_CMD_INFO:
 		return pca953x_info(chip);
 #endif
 	case PCA953X_CMD_DEVICE:
 		if (argc == 3)
 			chip = (uint8_t)ul_arg2;
 		printf("Current device address: 0x%x\n", chip);
 		return 0;
 	case PCA953X_CMD_INPUT:
 		pca953x_set_dir(chip, (1 << ul_arg2),
 				PCA953X_DIR_IN << ul_arg2);
 		val = (pca953x_get_val(chip) & (1 << ul_arg2)) != 0;

 		printf("chip 0x%02x, pin 0x%lx = %d\n", chip, ul_arg2, val);
 		return val;
 	case PCA953X_CMD_OUTPUT:
 		pca953x_set_dir(chip, (1 << ul_arg2),
 				(PCA953X_DIR_OUT << ul_arg2));
 		return pca953x_set_val(chip, (1 << ul_arg2),
 					(ul_arg3 << ul_arg2));
 	case PCA953X_CMD_INVERT:
 		return pca953x_set_pol(chip, (1 << ul_arg2),
 					(ul_arg3 << ul_arg2));
 	default:
 		/* We should never get here */
 		return 1;
 	}
 }

 U_BOOT_CMD(
 	pca953x,	5,	1,	do_pca953x,
 	"pca953x gpio access",
 	"device [dev]\n"
 	"	- show or set current device address\n"
 #ifdef CONFIG_CMD_PCA953X_INFO
 	"pca953x info\n"
 	"	- display info for current chip\n"
 #endif
 	"pca953x output pin 0|1\n"
 	"	- set pin as output and drive low or high\n"
 	"pca953x invert pin 0|1\n"
 	"	- disable/enable polarity inversion for reads\n"
 	"pca953x intput pin\n"
 	"	- set pin as input and read value"
 );

 #endif /* CONFIG_CMD_PCA953X */
	/*
	* Copyright 2008 Extreme Engineering Solutions, Inc.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* Version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* Driver for NXP's 4, 8 and 16 bit I2C gpio expanders (eg pca9537, pca9557,
	* pca9539, etc)
	*/

	#include <common.h>
	#include <i2c.h>
	#include <pca953x.h>

	/* Default to an address that hopefully won't corrupt other i2c devices */
	#ifndef CONFIG_SYS_I2C_PCA953X_ADDR
	#define CONFIG_SYS_I2C_PCA953X_ADDR (~0)
	#endif

	enum {
	PCA953X_CMD_INFO,
	PCA953X_CMD_DEVICE,
	PCA953X_CMD_OUTPUT,
	PCA953X_CMD_INPUT,
	PCA953X_CMD_INVERT,
	};

	#ifdef CONFIG_SYS_I2C_PCA953X_WIDTH
	struct pca953x_chip_ngpio {
	uint8_t chip;
	uint8_t ngpio;
	};

	static struct pca953x_chip_ngpio pca953x_chip_ngpios[] =
	CONFIG_SYS_I2C_PCA953X_WIDTH;

	#define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \
	sizeof(struct pca953x_chip_ngpio))

	/*
	* Determine the number of GPIO pins supported. If we don't know we assume
	* 8 pins.
	*/
	static int pca953x_ngpio(uint8_t chip)
	{
	int i;

	for (i = 0; i < NUM_CHIP_GPIOS; i++)
	if (pca953x_chip_ngpios[i].chip == chip)
	return pca953x_chip_ngpios[i].ngpio;

	return 8;
	}
	#else
	static int pca953x_ngpio(uint8_t chip)
	{
	return 8;
	}
	#endif

	/*
	* Modify masked bits in register
	*/
	static int pca953x_reg_write(uint8_t chip, uint addr, uint mask, uint data)
	{
	uint8_t valb;
	uint16_t valw;

	if (pca953x_ngpio(chip) <= 8) {
	if (i2c_read(chip, addr, 1, &valb, 1))
	return -1;

	valb &= ~mask;
	valb \|= data;

	return i2c_write(chip, addr, 1, &valb, 1);
	} else {
	if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
	return -1;

	valw &= ~mask;
	valw \|= data;

	return i2c_write(chip, addr << 1, 1, (u8*)&valw, 2);
	}
	}

	static int pca953x_reg_read(uint8_t chip, uint addr, uint *data)
	{
	uint8_t valb;
	uint16_t valw;

	if (pca953x_ngpio(chip) <= 8) {
	if (i2c_read(chip, addr, 1, &valb, 1))
	return -1;
	*data = (int)valb;
	} else {
	if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
	return -1;
	*data = (int)valw;
	}
	return 0;
	}

	/*
	* Set output value of IO pins in 'mask' to corresponding value in 'data'
	* 0 = low, 1 = high
	*/
	int pca953x_set_val(uint8_t chip, uint mask, uint data)
	{
	return pca953x_reg_write(chip, PCA953X_OUT, mask, data);
	}

	/*
	* Set read polarity of IO pins in 'mask' to corresponding value in 'data'
	* 0 = read pin value, 1 = read inverted pin value
	*/
	int pca953x_set_pol(uint8_t chip, uint mask, uint data)
	{
	return pca953x_reg_write(chip, PCA953X_POL, mask, data);
	}

	/*
	* Set direction of IO pins in 'mask' to corresponding value in 'data'
	* 0 = output, 1 = input
	*/
	int pca953x_set_dir(uint8_t chip, uint mask, uint data)
	{
	return pca953x_reg_write(chip, PCA953X_CONF, mask, data);
	}

	/*
	* Read current logic level of all IO pins
	*/
	int pca953x_get_val(uint8_t chip)
	{
	uint val;

	if (pca953x_reg_read(chip, PCA953X_IN, &val) < 0)
	return -1;

	return (int)val;
	}

	#ifdef CONFIG_CMD_PCA953X
	#ifdef CONFIG_CMD_PCA953X_INFO
	/*
	* Display pca953x information
	*/
	static int pca953x_info(uint8_t chip)
	{
	int i;
	uint data;
	int nr_gpio = pca953x_ngpio(chip);
	int msb = nr_gpio - 1;

	printf("pca953x@ 0x%x (%d pins):\n\n", chip, nr_gpio);
	printf("gpio pins: ");
	for (i = msb; i >= 0; i--)
	printf("%x", i);
	printf("\n");
	for (i = 11 + nr_gpio; i > 0; i--)
	printf("-");
	printf("\n");

	if (pca953x_reg_read(chip, PCA953X_CONF, &data) < 0)
	return -1;
	printf("conf: ");
	for (i = msb; i >= 0; i--)
	printf("%c", data & (1 << i) ? 'i' : 'o');
	printf("\n");

	if (pca953x_reg_read(chip, PCA953X_POL, &data) < 0)
	return -1;
	printf("invert: ");
	for (i = msb; i >= 0; i--)
	printf("%c", data & (1 << i) ? '1' : '0');
	printf("\n");

	if (pca953x_reg_read(chip, PCA953X_IN, &data) < 0)
	return -1;
	printf("input: ");
	for (i = msb; i >= 0; i--)
	printf("%c", data & (1 << i) ? '1' : '0');
	printf("\n");

	if (pca953x_reg_read(chip, PCA953X_OUT, &data) < 0)
	return -1;
	printf("output: ");
	for (i = msb; i >= 0; i--)
	printf("%c", data & (1 << i) ? '1' : '0');
	printf("\n");

	return 0;
	}
	#endif /* CONFIG_CMD_PCA953X_INFO */

	cmd_tbl_t cmd_pca953x[] = {
	U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""),
	U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""),
	U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""),
	U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""),
	#ifdef CONFIG_CMD_PCA953X_INFO
	U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""),
	#endif
	};

	int do_pca953x(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR;
	int val;
	ulong ul_arg2 = 0;
	ulong ul_arg3 = 0;
	cmd_tbl_t *c;

	c = find_cmd_tbl(argv[1], cmd_pca953x, ARRAY_SIZE(cmd_pca953x));

	/* All commands but "device" require 'maxargs' arguments */
	if (!c \|\| !((argc == (c->maxargs)) \|\|
	(((int)c->cmd == PCA953X_CMD_DEVICE) &&
	(argc == (c->maxargs - 1))))) {
	return cmd_usage(cmdtp);
	}

	/* arg2 used as chip number or pin number */
	if (argc > 2)
	ul_arg2 = simple_strtoul(argv[2], NULL, 16);

	/* arg3 used as pin or invert value */
	if (argc > 3)
	ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;

	switch ((int)c->cmd) {
	#ifdef CONFIG_CMD_PCA953X_INFO
	case PCA953X_CMD_INFO:
	return pca953x_info(chip);
	#endif
	case PCA953X_CMD_DEVICE:
	if (argc == 3)
	chip = (uint8_t)ul_arg2;
	printf("Current device address: 0x%x\n", chip);
	return 0;
	case PCA953X_CMD_INPUT:
	pca953x_set_dir(chip, (1 << ul_arg2),
	PCA953X_DIR_IN << ul_arg2);
	val = (pca953x_get_val(chip) & (1 << ul_arg2)) != 0;

	printf("chip 0x%02x, pin 0x%lx = %d\n", chip, ul_arg2, val);
	return val;
	case PCA953X_CMD_OUTPUT:
	pca953x_set_dir(chip, (1 << ul_arg2),
	(PCA953X_DIR_OUT << ul_arg2));
	return pca953x_set_val(chip, (1 << ul_arg2),
	(ul_arg3 << ul_arg2));
	case PCA953X_CMD_INVERT:
	return pca953x_set_pol(chip, (1 << ul_arg2),
	(ul_arg3 << ul_arg2));
	default:
	/* We should never get here */
	return 1;
	}
	}

	U_BOOT_CMD(
	pca953x, 5, 1, do_pca953x,
	"pca953x gpio access",
	"device [dev]\n"
	" - show or set current device address\n"
	#ifdef CONFIG_CMD_PCA953X_INFO
	"pca953x info\n"
	" - display info for current chip\n"
	#endif
	"pca953x output pin 0\|1\n"
	" - set pin as output and drive low or high\n"
	"pca953x invert pin 0\|1\n"
	" - disable/enable polarity inversion for reads\n"
	"pca953x intput pin\n"
	" - set pin as input and read value"
	);

	#endif /* CONFIG_CMD_PCA953X */