board/freescale/mpc8360erdk/mpc8360erdk.c - github/trini/u-boot - Gitiles

 /*
  * Copyright (C) 2006 Freescale Semiconductor, Inc.
  *                    Dave Liu <daveliu@freescale.com>
  *
  * Copyright (C) 2007 Logic Product Development, Inc.
  *                    Peter Barada <peterb@logicpd.com>
  *
  * Copyright (C) 2007 MontaVista Software, Inc.
  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  */

 #include <common.h>
 #include <ioports.h>
 #include <mpc83xx.h>
 #include <i2c.h>
 #include <miiphy.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <pci.h>
 #include <libfdt.h>

 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* MDIO */
 	{0,  1, 3, 0, 2}, /* MDIO */
 	{0,  2, 1, 0, 1}, /* MDC */

 	/* UCC1 - UEC (Gigabit) */
 	{0,  3, 1, 0, 1}, /* TxD0 */
 	{0,  4, 1, 0, 1}, /* TxD1 */
 	{0,  5, 1, 0, 1}, /* TxD2 */
 	{0,  6, 1, 0, 1}, /* TxD3 */
 	{0,  9, 2, 0, 1}, /* RxD0 */
 	{0, 10, 2, 0, 1}, /* RxD1 */
 	{0, 11, 2, 0, 1}, /* RxD2 */
 	{0, 12, 2, 0, 1}, /* RxD3 */
 	{0,  7, 1, 0, 1}, /* TX_EN */
 	{0,  8, 1, 0, 1}, /* TX_ER */
 	{0, 15, 2, 0, 1}, /* RX_DV */
 	{0,  0, 2, 0, 1}, /* RX_CLK */
 	{2,  9, 1, 0, 3}, /* GTX_CLK - CLK10 */
 	{2,  8, 2, 0, 1}, /* GTX125 - CLK9 */

 	/* UCC2 - UEC (Gigabit) */
 	{0, 17, 1, 0, 1}, /* TxD0 */
 	{0, 18, 1, 0, 1}, /* TxD1 */
 	{0, 19, 1, 0, 1}, /* TxD2 */
 	{0, 20, 1, 0, 1}, /* TxD3 */
 	{0, 23, 2, 0, 1}, /* RxD0 */
 	{0, 24, 2, 0, 1}, /* RxD1 */
 	{0, 25, 2, 0, 1}, /* RxD2 */
 	{0, 26, 2, 0, 1}, /* RxD3 */
 	{0, 21, 1, 0, 1}, /* TX_EN */
 	{0, 22, 1, 0, 1}, /* TX_ER */
 	{0, 29, 2, 0, 1}, /* RX_DV */
 	{0, 31, 2, 0, 1}, /* RX_CLK */
 	{2,  2, 1, 0, 2}, /* GTX_CLK - CLK10 */
 	{2,  3, 2, 0, 1}, /* GTX125 - CLK4 */

 	/* UCC7 - UEC */
 	{4,  0, 1, 0, 1}, /* TxD0 */
 	{4,  1, 1, 0, 1}, /* TxD1 */
 	{4,  2, 1, 0, 1}, /* TxD2 */
 	{4,  3, 1, 0, 1}, /* TxD3 */
 	{4,  6, 2, 0, 1}, /* RxD0 */
 	{4,  7, 2, 0, 1}, /* RxD1 */
 	{4,  8, 2, 0, 1}, /* RxD2 */
 	{4,  9, 2, 0, 1}, /* RxD3 */
 	{4,  4, 1, 0, 1}, /* TX_EN */
 	{4,  5, 1, 0, 1}, /* TX_ER */
 	{4, 12, 2, 0, 1}, /* RX_DV */
 	{4, 13, 2, 0, 1}, /* RX_ER */
 	{4, 10, 2, 0, 1}, /* COL */
 	{4, 11, 2, 0, 1}, /* CRS */
 	{2, 18, 2, 0, 1}, /* TX_CLK - CLK19 */
 	{2, 19, 2, 0, 1}, /* RX_CLK - CLK20 */

 	/* UCC4 - UEC */
 	{1, 14, 1, 0, 1}, /* TxD0 */
 	{1, 15, 1, 0, 1}, /* TxD1 */
 	{1, 16, 1, 0, 1}, /* TxD2 */
 	{1, 17, 1, 0, 1}, /* TxD3 */
 	{1, 20, 2, 0, 1}, /* RxD0 */
 	{1, 21, 2, 0, 1}, /* RxD1 */
 	{1, 22, 2, 0, 1}, /* RxD2 */
 	{1, 23, 2, 0, 1}, /* RxD3 */
 	{1, 18, 1, 0, 1}, /* TX_EN */
 	{1, 19, 1, 0, 2}, /* TX_ER */
 	{1, 26, 2, 0, 1}, /* RX_DV */
 	{1, 27, 2, 0, 1}, /* RX_ER */
 	{1, 24, 2, 0, 1}, /* COL */
 	{1, 25, 2, 0, 1}, /* CRS */
 	{2,  6, 2, 0, 1}, /* TX_CLK - CLK7 */
 	{2,  7, 2, 0, 1}, /* RX_CLK - CLK8 */

 	/* PCI1 */
 	{5,  4, 2, 0, 3}, /* PCI_M66EN */
 	{5,  5, 1, 0, 3}, /* PCI_INTA */
 	{5,  6, 1, 0, 3}, /* PCI_RSTO */
 	{5,  7, 3, 0, 3}, /* PCI_C_BE0 */
 	{5,  8, 3, 0, 3}, /* PCI_C_BE1 */
 	{5,  9, 3, 0, 3}, /* PCI_C_BE2 */
 	{5, 10, 3, 0, 3}, /* PCI_C_BE3 */
 	{5, 11, 3, 0, 3}, /* PCI_PAR */
 	{5, 12, 3, 0, 3}, /* PCI_FRAME */
 	{5, 13, 3, 0, 3}, /* PCI_TRDY */
 	{5, 14, 3, 0, 3}, /* PCI_IRDY */
 	{5, 15, 3, 0, 3}, /* PCI_STOP */
 	{5, 16, 3, 0, 3}, /* PCI_DEVSEL */
 	{5, 17, 0, 0, 0}, /* PCI_IDSEL */
 	{5, 18, 3, 0, 3}, /* PCI_SERR */
 	{5, 19, 3, 0, 3}, /* PCI_PERR */
 	{5, 20, 3, 0, 3}, /* PCI_REQ0 */
 	{5, 21, 2, 0, 3}, /* PCI_REQ1 */
 	{5, 22, 2, 0, 3}, /* PCI_GNT2 */
 	{5, 23, 3, 0, 3}, /* PCI_GNT0 */
 	{5, 24, 1, 0, 3}, /* PCI_GNT1 */
 	{5, 25, 1, 0, 3}, /* PCI_GNT2 */
 	{5, 26, 0, 0, 0}, /* PCI_CLK0 */
 	{5, 27, 0, 0, 0}, /* PCI_CLK1 */
 	{5, 28, 0, 0, 0}, /* PCI_CLK2 */
 	{5, 29, 0, 0, 3}, /* PCI_SYNC_OUT */
 	{6,  0, 3, 0, 3}, /* PCI_AD0 */
 	{6,  1, 3, 0, 3}, /* PCI_AD1 */
 	{6,  2, 3, 0, 3}, /* PCI_AD2 */
 	{6,  3, 3, 0, 3}, /* PCI_AD3 */
 	{6,  4, 3, 0, 3}, /* PCI_AD4 */
 	{6,  5, 3, 0, 3}, /* PCI_AD5 */
 	{6,  6, 3, 0, 3}, /* PCI_AD6 */
 	{6,  7, 3, 0, 3}, /* PCI_AD7 */
 	{6,  8, 3, 0, 3}, /* PCI_AD8 */
 	{6,  9, 3, 0, 3}, /* PCI_AD9 */
 	{6, 10, 3, 0, 3}, /* PCI_AD10 */
 	{6, 11, 3, 0, 3}, /* PCI_AD11 */
 	{6, 12, 3, 0, 3}, /* PCI_AD12 */
 	{6, 13, 3, 0, 3}, /* PCI_AD13 */
 	{6, 14, 3, 0, 3}, /* PCI_AD14 */
 	{6, 15, 3, 0, 3}, /* PCI_AD15 */
 	{6, 16, 3, 0, 3}, /* PCI_AD16 */
 	{6, 17, 3, 0, 3}, /* PCI_AD17 */
 	{6, 18, 3, 0, 3}, /* PCI_AD18 */
 	{6, 19, 3, 0, 3}, /* PCI_AD19 */
 	{6, 20, 3, 0, 3}, /* PCI_AD20 */
 	{6, 21, 3, 0, 3}, /* PCI_AD21 */
 	{6, 22, 3, 0, 3}, /* PCI_AD22 */
 	{6, 23, 3, 0, 3}, /* PCI_AD23 */
 	{6, 24, 3, 0, 3}, /* PCI_AD24 */
 	{6, 25, 3, 0, 3}, /* PCI_AD25 */
 	{6, 26, 3, 0, 3}, /* PCI_AD26 */
 	{6, 27, 3, 0, 3}, /* PCI_AD27 */
 	{6, 28, 3, 0, 3}, /* PCI_AD28 */
 	{6, 29, 3, 0, 3}, /* PCI_AD29 */
 	{6, 30, 3, 0, 3}, /* PCI_AD30 */
 	{6, 31, 3, 0, 3}, /* PCI_AD31 */

 	/* NAND */
 	{4, 18, 2, 0, 0}, /* NAND_RYnBY */

 	/* DUART - UART2 */
 	{5,  0, 1, 0, 2}, /* UART2_SOUT */
 	{5,  2, 1, 0, 1}, /* UART2_RTS */
 	{5,  3, 2, 0, 2}, /* UART2_SIN */
 	{5,  1, 2, 0, 3}, /* UART2_CTS */

 	/* UCC5 - UART3 */
 	{3,  0, 1, 0, 1}, /* UART3_TX */
 	{3,  4, 1, 0, 1}, /* UART3_RTS */
 	{3,  6, 2, 0, 1}, /* UART3_RX */
 	{3, 12, 2, 0, 0}, /* UART3_CTS */
 	{3, 13, 2, 0, 0}, /* UCC5_CD */

 	/* UCC6 - UART4 */
 	{3, 14, 1, 0, 1}, /* UART4_TX */
 	{3, 18, 1, 0, 1}, /* UART4_RTS */
 	{3, 20, 2, 0, 1}, /* UART4_RX */
 	{3, 26, 2, 0, 0}, /* UART4_CTS */
 	{3, 27, 2, 0, 0}, /* UCC6_CD */

 	/* Fujitsu MB86277 (MINT) graphics controller */
 	{0, 30, 1, 0, 0}, /* nSRESET_GRAPHICS */
 	{1,  5, 1, 0, 0}, /* nXRST_GRAPHICS */
 	{1,  7, 1, 0, 0}, /* LVDS_BKLT_CTR */
 	{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */

 	/* AD7843 ADC/Touchscreen controller */
 	{4, 14, 1, 0, 0}, /* SPI_nCS0 */
 	{4, 28, 3, 0, 3}, /* SPI_MOSI */
 	{4, 29, 3, 0, 3}, /* SPI_MISO */
 	{4, 30, 3, 0, 3}, /* SPI_CLK */

 	/* Freescale QUICC Engine USB Host Controller (FHCI) */
 	{1,  2, 1, 0, 3}, /* USBOE */
 	{1,  3, 1, 0, 3}, /* USBTP */
 	{1,  8, 1, 0, 1}, /* USBTN */
 	{1,  9, 2, 1, 3}, /* USBRP */
 	{1, 10, 2, 0, 3}, /* USBRXD */
 	{1, 11, 2, 1, 3}, /* USBRN */
 	{2, 20, 2, 0, 1}, /* CLK21 */
 	{4, 20, 1, 0, 0}, /* SPEED */
 	{4, 21, 1, 0, 0}, /* SUSPND */

 	/* END of table */
 	{0,  0, 0, 0, QE_IOP_TAB_END},
 };

 int board_early_init_f(void)
 {
 	return 0;
 }

 int board_early_init_r(void)
 {
 	void *reg = (void *)(CFG_IMMR + 0x14a8);
 	u32 val;

 	/*
 	 * Because of errata in the UCCs, we have to write to the reserved
 	 * registers to slow the clocks down.
 	 */
 	val = in_be32(reg);
 	/* UCC1 */
 	val |= 0x00003000;
 	/* UCC2 */
 	val |= 0x0c000000;
 	out_be32(reg, val);

 	return 0;
 }

 int fixed_sdram(void)
 {
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	u32 msize = 0;
 	u32 ddr_size;
 	u32 ddr_size_log2;

 	msize = CFG_DDR_SIZE;
 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
 		if (ddr_size & 1)
 			return -1;
 	}

 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);

 	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
 	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
 	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
 	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
 	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
 	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
 	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
 	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
 	im->ddr.sdram_mode = CFG_DDR_MODE;
 	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
 	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
 	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
 	udelay(200);
 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;

 	return msize;
 }

 phys_size_t initdram(int board_type)
 {
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 	extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	u32 msize = 0;

 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;

 	/* DDR SDRAM - Main SODIMM */
 	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
 	msize = fixed_sdram();

 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 	/*
 	 * Initialize DDR ECC byte
 	 */
 	ddr_enable_ecc(msize * 1024 * 1024);
 #endif

 	/* return total bus SDRAM size(bytes)  -- DDR */
 	return (msize * 1024 * 1024);
 }

 int checkboard(void)
 {
 	puts("Board: Freescale/Logic MPC8360ERDK\n");
 	return 0;
 }

 static struct pci_region pci_regions[] = {
 	{
 		.bus_start = CFG_PCI1_MEM_BASE,
 		.phys_start = CFG_PCI1_MEM_PHYS,
 		.size = CFG_PCI1_MEM_SIZE,
 		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH,
 	},
 	{
 		.bus_start = CFG_PCI1_MMIO_BASE,
 		.phys_start = CFG_PCI1_MMIO_PHYS,
 		.size = CFG_PCI1_MMIO_SIZE,
 		.flags = PCI_REGION_MEM,
 	},
 	{
 		.bus_start = CFG_PCI1_IO_BASE,
 		.phys_start = CFG_PCI1_IO_PHYS,
 		.size = CFG_PCI1_IO_SIZE,
 		.flags = PCI_REGION_IO,
 	},
 };

 void pci_init_board(void)
 {
 	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
 	struct pci_region *reg[] = { pci_regions, };

 #if defined(PCI_33M)
 	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
 		    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
 	printf("PCI clock is 33MHz\n");
 #else
 	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
 	printf("PCI clock is 66MHz\n");
 #endif

 	udelay(2000);

 	/* Configure PCI Local Access Windows */
 	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;

 	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;

 	mpc83xx_pci_init(1, reg, 0);
 }

 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 	ft_pci_setup(blob, bd);
 }
 #endif
	/*
	* Copyright (C) 2006 Freescale Semiconductor, Inc.
	* Dave Liu <daveliu@freescale.com>
	*
	* Copyright (C) 2007 Logic Product Development, Inc.
	* Peter Barada <peterb@logicpd.com>
	*
	* Copyright (C) 2007 MontaVista Software, Inc.
	* Anton Vorontsov <avorontsov@ru.mvista.com>
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*/

	#include <common.h>
	#include <ioports.h>
	#include <mpc83xx.h>
	#include <i2c.h>
	#include <miiphy.h>
	#include <asm/io.h>
	#include <asm/mmu.h>
	#include <pci.h>
	#include <libfdt.h>

	const qe_iop_conf_t qe_iop_conf_tab[] = {
	/* MDIO */
	{0, 1, 3, 0, 2}, /* MDIO */
	{0, 2, 1, 0, 1}, /* MDC */

	/* UCC1 - UEC (Gigabit) */
	{0, 3, 1, 0, 1}, /* TxD0 */
	{0, 4, 1, 0, 1}, /* TxD1 */
	{0, 5, 1, 0, 1}, /* TxD2 */
	{0, 6, 1, 0, 1}, /* TxD3 */
	{0, 9, 2, 0, 1}, /* RxD0 */
	{0, 10, 2, 0, 1}, /* RxD1 */
	{0, 11, 2, 0, 1}, /* RxD2 */
	{0, 12, 2, 0, 1}, /* RxD3 */
	{0, 7, 1, 0, 1}, /* TX_EN */
	{0, 8, 1, 0, 1}, /* TX_ER */
	{0, 15, 2, 0, 1}, /* RX_DV */
	{0, 0, 2, 0, 1}, /* RX_CLK */
	{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
	{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */

	/* UCC2 - UEC (Gigabit) */
	{0, 17, 1, 0, 1}, /* TxD0 */
	{0, 18, 1, 0, 1}, /* TxD1 */
	{0, 19, 1, 0, 1}, /* TxD2 */
	{0, 20, 1, 0, 1}, /* TxD3 */
	{0, 23, 2, 0, 1}, /* RxD0 */
	{0, 24, 2, 0, 1}, /* RxD1 */
	{0, 25, 2, 0, 1}, /* RxD2 */
	{0, 26, 2, 0, 1}, /* RxD3 */
	{0, 21, 1, 0, 1}, /* TX_EN */
	{0, 22, 1, 0, 1}, /* TX_ER */
	{0, 29, 2, 0, 1}, /* RX_DV */
	{0, 31, 2, 0, 1}, /* RX_CLK */
	{2, 2, 1, 0, 2}, /* GTX_CLK - CLK10 */
	{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */

	/* UCC7 - UEC */
	{4, 0, 1, 0, 1}, /* TxD0 */
	{4, 1, 1, 0, 1}, /* TxD1 */
	{4, 2, 1, 0, 1}, /* TxD2 */
	{4, 3, 1, 0, 1}, /* TxD3 */
	{4, 6, 2, 0, 1}, /* RxD0 */
	{4, 7, 2, 0, 1}, /* RxD1 */
	{4, 8, 2, 0, 1}, /* RxD2 */
	{4, 9, 2, 0, 1}, /* RxD3 */
	{4, 4, 1, 0, 1}, /* TX_EN */
	{4, 5, 1, 0, 1}, /* TX_ER */
	{4, 12, 2, 0, 1}, /* RX_DV */
	{4, 13, 2, 0, 1}, /* RX_ER */
	{4, 10, 2, 0, 1}, /* COL */
	{4, 11, 2, 0, 1}, /* CRS */
	{2, 18, 2, 0, 1}, /* TX_CLK - CLK19 */
	{2, 19, 2, 0, 1}, /* RX_CLK - CLK20 */

	/* UCC4 - UEC */
	{1, 14, 1, 0, 1}, /* TxD0 */
	{1, 15, 1, 0, 1}, /* TxD1 */
	{1, 16, 1, 0, 1}, /* TxD2 */
	{1, 17, 1, 0, 1}, /* TxD3 */
	{1, 20, 2, 0, 1}, /* RxD0 */
	{1, 21, 2, 0, 1}, /* RxD1 */
	{1, 22, 2, 0, 1}, /* RxD2 */
	{1, 23, 2, 0, 1}, /* RxD3 */
	{1, 18, 1, 0, 1}, /* TX_EN */
	{1, 19, 1, 0, 2}, /* TX_ER */
	{1, 26, 2, 0, 1}, /* RX_DV */
	{1, 27, 2, 0, 1}, /* RX_ER */
	{1, 24, 2, 0, 1}, /* COL */
	{1, 25, 2, 0, 1}, /* CRS */
	{2, 6, 2, 0, 1}, /* TX_CLK - CLK7 */
	{2, 7, 2, 0, 1}, /* RX_CLK - CLK8 */

	/* PCI1 */
	{5, 4, 2, 0, 3}, /* PCI_M66EN */
	{5, 5, 1, 0, 3}, /* PCI_INTA */
	{5, 6, 1, 0, 3}, /* PCI_RSTO */
	{5, 7, 3, 0, 3}, /* PCI_C_BE0 */
	{5, 8, 3, 0, 3}, /* PCI_C_BE1 */
	{5, 9, 3, 0, 3}, /* PCI_C_BE2 */
	{5, 10, 3, 0, 3}, /* PCI_C_BE3 */
	{5, 11, 3, 0, 3}, /* PCI_PAR */
	{5, 12, 3, 0, 3}, /* PCI_FRAME */
	{5, 13, 3, 0, 3}, /* PCI_TRDY */
	{5, 14, 3, 0, 3}, /* PCI_IRDY */
	{5, 15, 3, 0, 3}, /* PCI_STOP */
	{5, 16, 3, 0, 3}, /* PCI_DEVSEL */
	{5, 17, 0, 0, 0}, /* PCI_IDSEL */
	{5, 18, 3, 0, 3}, /* PCI_SERR */
	{5, 19, 3, 0, 3}, /* PCI_PERR */
	{5, 20, 3, 0, 3}, /* PCI_REQ0 */
	{5, 21, 2, 0, 3}, /* PCI_REQ1 */
	{5, 22, 2, 0, 3}, /* PCI_GNT2 */
	{5, 23, 3, 0, 3}, /* PCI_GNT0 */
	{5, 24, 1, 0, 3}, /* PCI_GNT1 */
	{5, 25, 1, 0, 3}, /* PCI_GNT2 */
	{5, 26, 0, 0, 0}, /* PCI_CLK0 */
	{5, 27, 0, 0, 0}, /* PCI_CLK1 */
	{5, 28, 0, 0, 0}, /* PCI_CLK2 */
	{5, 29, 0, 0, 3}, /* PCI_SYNC_OUT */
	{6, 0, 3, 0, 3}, /* PCI_AD0 */
	{6, 1, 3, 0, 3}, /* PCI_AD1 */
	{6, 2, 3, 0, 3}, /* PCI_AD2 */
	{6, 3, 3, 0, 3}, /* PCI_AD3 */
	{6, 4, 3, 0, 3}, /* PCI_AD4 */
	{6, 5, 3, 0, 3}, /* PCI_AD5 */
	{6, 6, 3, 0, 3}, /* PCI_AD6 */
	{6, 7, 3, 0, 3}, /* PCI_AD7 */
	{6, 8, 3, 0, 3}, /* PCI_AD8 */
	{6, 9, 3, 0, 3}, /* PCI_AD9 */
	{6, 10, 3, 0, 3}, /* PCI_AD10 */
	{6, 11, 3, 0, 3}, /* PCI_AD11 */
	{6, 12, 3, 0, 3}, /* PCI_AD12 */
	{6, 13, 3, 0, 3}, /* PCI_AD13 */
	{6, 14, 3, 0, 3}, /* PCI_AD14 */
	{6, 15, 3, 0, 3}, /* PCI_AD15 */
	{6, 16, 3, 0, 3}, /* PCI_AD16 */
	{6, 17, 3, 0, 3}, /* PCI_AD17 */
	{6, 18, 3, 0, 3}, /* PCI_AD18 */
	{6, 19, 3, 0, 3}, /* PCI_AD19 */
	{6, 20, 3, 0, 3}, /* PCI_AD20 */
	{6, 21, 3, 0, 3}, /* PCI_AD21 */
	{6, 22, 3, 0, 3}, /* PCI_AD22 */
	{6, 23, 3, 0, 3}, /* PCI_AD23 */
	{6, 24, 3, 0, 3}, /* PCI_AD24 */
	{6, 25, 3, 0, 3}, /* PCI_AD25 */
	{6, 26, 3, 0, 3}, /* PCI_AD26 */
	{6, 27, 3, 0, 3}, /* PCI_AD27 */
	{6, 28, 3, 0, 3}, /* PCI_AD28 */
	{6, 29, 3, 0, 3}, /* PCI_AD29 */
	{6, 30, 3, 0, 3}, /* PCI_AD30 */
	{6, 31, 3, 0, 3}, /* PCI_AD31 */

	/* NAND */
	{4, 18, 2, 0, 0}, /* NAND_RYnBY */

	/* DUART - UART2 */
	{5, 0, 1, 0, 2}, /* UART2_SOUT */
	{5, 2, 1, 0, 1}, /* UART2_RTS */
	{5, 3, 2, 0, 2}, /* UART2_SIN */
	{5, 1, 2, 0, 3}, /* UART2_CTS */

	/* UCC5 - UART3 */
	{3, 0, 1, 0, 1}, /* UART3_TX */
	{3, 4, 1, 0, 1}, /* UART3_RTS */
	{3, 6, 2, 0, 1}, /* UART3_RX */
	{3, 12, 2, 0, 0}, /* UART3_CTS */
	{3, 13, 2, 0, 0}, /* UCC5_CD */

	/* UCC6 - UART4 */
	{3, 14, 1, 0, 1}, /* UART4_TX */
	{3, 18, 1, 0, 1}, /* UART4_RTS */
	{3, 20, 2, 0, 1}, /* UART4_RX */
	{3, 26, 2, 0, 0}, /* UART4_CTS */
	{3, 27, 2, 0, 0}, /* UCC6_CD */

	/* Fujitsu MB86277 (MINT) graphics controller */
	{0, 30, 1, 0, 0}, /* nSRESET_GRAPHICS */
	{1, 5, 1, 0, 0}, /* nXRST_GRAPHICS */
	{1, 7, 1, 0, 0}, /* LVDS_BKLT_CTR */
	{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */

	/* AD7843 ADC/Touchscreen controller */
	{4, 14, 1, 0, 0}, /* SPI_nCS0 */
	{4, 28, 3, 0, 3}, /* SPI_MOSI */
	{4, 29, 3, 0, 3}, /* SPI_MISO */
	{4, 30, 3, 0, 3}, /* SPI_CLK */

	/* Freescale QUICC Engine USB Host Controller (FHCI) */
	{1, 2, 1, 0, 3}, /* USBOE */
	{1, 3, 1, 0, 3}, /* USBTP */
	{1, 8, 1, 0, 1}, /* USBTN */
	{1, 9, 2, 1, 3}, /* USBRP */
	{1, 10, 2, 0, 3}, /* USBRXD */
	{1, 11, 2, 1, 3}, /* USBRN */
	{2, 20, 2, 0, 1}, /* CLK21 */
	{4, 20, 1, 0, 0}, /* SPEED */
	{4, 21, 1, 0, 0}, /* SUSPND */

	/* END of table */
	{0, 0, 0, 0, QE_IOP_TAB_END},
	};

	int board_early_init_f(void)
	{
	return 0;
	}

	int board_early_init_r(void)
	{
	void reg = (void )(CFG_IMMR + 0x14a8);
	u32 val;

	/*
	* Because of errata in the UCCs, we have to write to the reserved
	* registers to slow the clocks down.
	*/
	val = in_be32(reg);
	/* UCC1 */
	val \|= 0x00003000;
	/* UCC2 */
	val \|= 0x0c000000;
	out_be32(reg, val);

	return 0;
	}

	int fixed_sdram(void)
	{
	volatile immap_t im = (immap_t )CFG_IMMR;
	u32 msize = 0;
	u32 ddr_size;
	u32 ddr_size_log2;

	msize = CFG_DDR_SIZE;
	for (ddr_size = msize << 20, ddr_size_log2 = 0;
	(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
	if (ddr_size & 1)
	return -1;
	}

	im->sysconf.ddrlaw[0].ar =
	LAWAR_EN \| ((ddr_size_log2 - 1) & LAWAR_SIZE);

	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
	im->ddr.sdram_mode = CFG_DDR_MODE;
	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
	udelay(200);
	im->ddr.sdram_cfg \|= SDRAM_CFG_MEM_EN;

	return msize;
	}

	phys_size_t initdram(int board_type)
	{
	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
	extern void ddr_enable_ecc(unsigned int dram_size);
	#endif
	volatile immap_t im = (immap_t )CFG_IMMR;
	u32 msize = 0;

	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
	return -1;

	/* DDR SDRAM - Main SODIMM */
	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
	msize = fixed_sdram();

	#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
	/*
	* Initialize DDR ECC byte
	*/
	ddr_enable_ecc(msize * 1024 * 1024);
	#endif

	/* return total bus SDRAM size(bytes) -- DDR */
	return (msize * 1024 * 1024);
	}

	int checkboard(void)
	{
	puts("Board: Freescale/Logic MPC8360ERDK\n");
	return 0;
	}

	static struct pci_region pci_regions[] = {
	{
	.bus_start = CFG_PCI1_MEM_BASE,
	.phys_start = CFG_PCI1_MEM_PHYS,
	.size = CFG_PCI1_MEM_SIZE,
	.flags = PCI_REGION_MEM \| PCI_REGION_PREFETCH,
	},
	{
	.bus_start = CFG_PCI1_MMIO_BASE,
	.phys_start = CFG_PCI1_MMIO_PHYS,
	.size = CFG_PCI1_MMIO_SIZE,
	.flags = PCI_REGION_MEM,
	},
	{
	.bus_start = CFG_PCI1_IO_BASE,
	.phys_start = CFG_PCI1_IO_PHYS,
	.size = CFG_PCI1_IO_SIZE,
	.flags = PCI_REGION_IO,
	},
	};

	void pci_init_board(void)
	{
	volatile immap_t immr = (volatile immap_t )CFG_IMMR;
	volatile clk83xx_t clk = (volatile clk83xx_t )&immr->clk;
	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
	struct pci_region *reg[] = { pci_regions, };

	#if defined(PCI_33M)
	clk->occr = OCCR_PCICOE0 \| OCCR_PCICOE1 \| OCCR_PCICOE2 \|
	OCCR_PCICD0 \| OCCR_PCICD1 \| OCCR_PCICD2 \| OCCR_PCICR;
	printf("PCI clock is 33MHz\n");
	#else
	clk->occr = OCCR_PCICOE0 \| OCCR_PCICOE1 \| OCCR_PCICOE2;
	printf("PCI clock is 66MHz\n");
	#endif

	udelay(2000);

	/* Configure PCI Local Access Windows */
	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
	pci_law[0].ar = LBLAWAR_EN \| LBLAWAR_512MB;

	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
	pci_law[1].ar = LBLAWAR_EN \| LBLAWAR_1MB;

	mpc83xx_pci_init(1, reg, 0);
	}

	#if defined(CONFIG_OF_BOARD_SETUP)
	void ft_board_setup(void blob, bd_t bd)
	{
	ft_cpu_setup(blob, bd);
	ft_pci_setup(blob, bd);
	}
	#endif