include/configs/colibri_imx7.h - github/trini/u-boot - Gitiles

 /*
  * Copyright 2016 Toradex AG
  *
  * Configuration settings for the Colibri iMX7 module.
  *
  * based on mx7dsabresd.h:
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __COLIBRI_IMX7_CONFIG_H
 #define __COLIBRI_IMX7_CONFIG_H

 #include "mx7_common.h"

 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_USE_ARCH_MEMCPY
 #define CONFIG_USE_ARCH_MEMSET

 /*#define CONFIG_DBG_MONITOR*/
 #define PHYS_SDRAM_SIZE			SZ_512M

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT

 #define CONFIG_DISPLAY_BOARDINFO_LATE

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)

 /* Uncomment to enable secure boot support */
 /* #define CONFIG_SECURE_BOOT */
 #define CONFIG_CSF_SIZE			0x4000

 #define CONFIG_CMD_BMODE

 /* Network */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE             RMII
 #define CONFIG_ETHPRIME                 "FEC"
 #define CONFIG_FEC_MXC_PHYADDR          0

 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_IP_DEFRAG
 #define CONFIG_TFTP_BLOCKSIZE		16352
 #define CONFIG_TFTP_TSIZE

 /* ENET1 */
 #define IMX_FEC_BASE			ENET_IPS_BASE_ADDR

 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	1

 #undef CONFIG_BOOTM_PLAN9
 #undef CONFIG_BOOTM_RTEMS

 /* I2C configs */
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000

 #define CONFIG_IPADDR			192.168.10.2
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1

 #define MEM_LAYOUT_ENV_SETTINGS \
 	"fdt_addr_r=0x82000000\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"ramdisk_addr_r=0x82100000\0"

 #define SD_BOOTCMD \
 	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 	"run m4boot && " \
 	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
 	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
 	"nfsboot=run setup; " \
 		"setenv bootargs ${defargs} ${nfsargs} " \
 		"${setupargs} ${vidargs}; echo Booting from NFS...;" \
 		"dhcp ${kernel_addr_r} && "	\
 		"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define UBI_BOOTCMD	\
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 		"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
 		"setenv bootargs ${defargs} ${ubiargs} " \
 		"${setupargs} ${vidargs}; echo Booting from NAND...; " \
 		"ubi part ubi && run m4boot && " \
 		"ubi read ${kernel_addr_r} kernel && " \
 		"ubi read ${fdt_addr_r} dtb && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
 	UBI_BOOTCMD \
 	"console=ttymxc0\0" \
 	"defargs=\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
 	"m4boot=;\0" \
 	"ip_dyn=yes\0" \
 	"kernel_file=zImage\0" \
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"${board}/flash_eth.img && source ${loadaddr}\0" \
 	"setsdupdate=mmc rescan && setenv interface mmc && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
 		",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
 	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP

 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x0c000000)

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000

 #define CONFIG_STACKSIZE		SZ_128K

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_IN_NAND

 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
 #define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_ENV_OFFSET		(4 * 1024 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #endif

 #define CONFIG_NAND_MXS
 #define CONFIG_CMD_NAND_TRIMFFS

 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
 #define CONFIG_CMD_NAND_TORTURE

 /* UBI stuff */
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT		"nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:"		\
 				"512k(mx7-bcb),"		\
 				"3584k(u-boot)ro,"		\
 				"512k(u-boot-env),"		\
 				"-(ubi)"

 /* DMA stuff, needed for GPMI/MXS NAND support */
 #define CONFIG_APBH_DMA
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8

 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2

 #define CONFIG_IMX_THERMAL

 #define CONFIG_USBD_HS

 #define CONFIG_USB_FUNCTION_MASS_STORAGE

 /* USB Device Firmware Update support */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT	300

 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
 #endif

 #endif
	/*
	* Copyright 2016 Toradex AG
	*
	* Configuration settings for the Colibri iMX7 module.
	*
	* based on mx7dsabresd.h:
	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __COLIBRI_IMX7_CONFIG_H
	#define __COLIBRI_IMX7_CONFIG_H

	#include "mx7_common.h"

	#define CONFIG_SYS_THUMB_BUILD
	#define CONFIG_USE_ARCH_MEMCPY
	#define CONFIG_USE_ARCH_MEMSET

	/#define CONFIG_DBG_MONITOR/
	#define PHYS_SDRAM_SIZE SZ_512M

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_BOARD_LATE_INIT

	#define CONFIG_DISPLAY_BOARDINFO_LATE

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)

	/* Uncomment to enable secure boot support */
	/* #define CONFIG_SECURE_BOOT */
	#define CONFIG_CSF_SIZE 0x4000

	#define CONFIG_CMD_BMODE

	/* Network */
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 0

	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL
	#define CONFIG_IP_DEFRAG
	#define CONFIG_TFTP_BLOCKSIZE 16352
	#define CONFIG_TFTP_TSIZE

	/* ENET1 */
	#define IMX_FEC_BASE ENET_IPS_BASE_ADDR

	/* MMC Config*/
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_USDHC_NUM 1

	#undef CONFIG_BOOTM_PLAN9
	#undef CONFIG_BOOTM_RTEMS

	/* I2C configs */
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_SPEED 100000

	#define CONFIG_IPADDR 192.168.10.2
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_SERVERIP 192.168.10.1

	#define MEM_LAYOUT_ENV_SETTINGS \
	"fdt_addr_r=0x82000000\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_addr_r=0x81000000\0" \
	"ramdisk_addr_r=0x82100000\0"

	#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"run m4boot && " \
	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && " \
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define UBI_BOOTCMD \
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} " \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && run m4boot && " \
	"ubi read ${kernel_addr_r} kernel && " \
	"ubi read ${fdt_addr_r} dtb && " \
	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	MEM_LAYOUT_ENV_SETTINGS \
	NFS_BOOTCMD \
	SD_BOOTCMD \
	UBI_BOOTCMD \
	"console=ttymxc0\0" \
	"defargs=\0" \
	"fdt_board=eval-v3\0" \
	"fdt_fixup=;\0" \
	"m4boot=;\0" \
	"ip_dyn=yes\0" \
	"kernel_file=zImage\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
	"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
	"${board}/flash_eth.img && source ${loadaddr}\0" \
	"setsdupdate=mmc rescan && setenv interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} " \
	"${board}/flash_blk.img && source ${loadaddr}\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
	"setupdate=run setsdupdate \|\| run setusbupdate \|\| run setethupdate\0" \
	"setusbupdate=usb start && setenv interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} " \
	"${board}/flash_blk.img && source ${loadaddr}\0" \
	"splashpos=m,m\0" \
	"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP

	#define CONFIG_SYS_MEMTEST_START 0x80000000
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	#define CONFIG_SYS_HZ 1000

	#define CONFIG_STACKSIZE SZ_128K

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* FLASH and environment organization */
	#define CONFIG_SYS_NO_FLASH
	#define CONFIG_ENV_IS_IN_NAND

	#if defined(CONFIG_ENV_IS_IN_MMC)
	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	#elif defined(CONFIG_ENV_IS_IN_NAND)
	#define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	#endif

	#define CONFIG_NAND_MXS
	#define CONFIG_CMD_NAND_TRIMFFS

	/* NAND stuff */
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
	#define CONFIG_CMD_NAND_TORTURE

	/* UBI stuff */
	#define CONFIG_RBTREE
	#define CONFIG_LZO
	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */

	/* Dynamic MTD partition support */
	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
	"512k(mx7-bcb)," \
	"3584k(u-boot)ro," \
	"512k(u-boot-env)," \
	"-(ubi)"

	/* DMA stuff, needed for GPMI/MXS NAND support */
	#define CONFIG_APBH_DMA
	#define CONFIG_APBH_DMA_BURST
	#define CONFIG_APBH_DMA_BURST8

	/* USB Configs */
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2

	#define CONFIG_IMX_THERMAL

	#define CONFIG_USBD_HS

	#define CONFIG_USB_FUNCTION_MASS_STORAGE

	/* USB Device Firmware Update support */
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
	#define DFU_DEFAULT_POLL_TIMEOUT 300

	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_MXS
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_SW_CURSOR
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_CMD_BMP
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_VIDEO_BMP_LOGO
	#endif

	#endif