blob: 66f9164d562971bb17a398d43985402b85d2148a [file] [log] [blame]
/*
* (C) Copyright 2003
* Josef Baumgartner <josef.baumgartner@telex.de>
*
* MCF5282 additionals
* (C) Copyright 2005
* BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
* Hayden Fraser (Hayden.Fraser@freescale.com)
*
* MCF5275 additions
* Copyright (C) 2008 Arthur Shipkowski (art@videon-central.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/immap.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <net.h>
#include <asm/fec.h>
#endif
#ifndef CONFIG_M5272
/* Only 5272 Flexbus chipselect is different from the rest */
void init_fbcs(void)
{
volatile fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
&& defined(CONFIG_SYS_CS0_CTRL))
fbcs->csar0 = CONFIG_SYS_CS0_BASE;
fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
#else
#warning "Chip Select 0 are not initialized/used"
#endif
#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
&& defined(CONFIG_SYS_CS1_CTRL))
fbcs->csar1 = CONFIG_SYS_CS1_BASE;
fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
#endif
#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
&& defined(CONFIG_SYS_CS2_CTRL))
fbcs->csar2 = CONFIG_SYS_CS2_BASE;
fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
#endif
#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
&& defined(CONFIG_SYS_CS3_CTRL))
fbcs->csar3 = CONFIG_SYS_CS3_BASE;
fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
#endif
#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
&& defined(CONFIG_SYS_CS4_CTRL))
fbcs->csar4 = CONFIG_SYS_CS4_BASE;
fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
#endif
#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
&& defined(CONFIG_SYS_CS5_CTRL))
fbcs->csar5 = CONFIG_SYS_CS5_BASE;
fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
#endif
#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \
&& defined(CONFIG_SYS_CS6_CTRL))
fbcs->csar6 = CONFIG_SYS_CS6_BASE;
fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
#endif
#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \
&& defined(CONFIG_SYS_CS7_CTRL))
fbcs->csar7 = CONFIG_SYS_CS7_BASE;
fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
#endif
}
#endif
#if defined(CONFIG_M5253)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
mbar_writeByte(MCFSIM_MPARK, 0x40); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
mbar_writeByte(MCFSIM_SWSR, 0x00);
mbar_writeByte(MCFSIM_SWDICR, 0x00);
mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
mbar_writeByte(MCFSIM_I2CICR, 0x00);
mbar_writeByte(MCFSIM_UART1ICR, 0x00);
mbar_writeByte(MCFSIM_UART2ICR, 0x00);
mbar_writeByte(MCFSIM_ICR6, 0x00);
mbar_writeByte(MCFSIM_ICR7, 0x00);
mbar_writeByte(MCFSIM_ICR8, 0x00);
mbar_writeByte(MCFSIM_ICR9, 0x00);
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
/*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */
/* FlexBus Chipselect */
init_fbcs();
#ifdef CONFIG_FSL_I2C
CONFIG_SYS_I2C_PINMUX_REG =
CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
#ifdef CONFIG_SYS_I2C2_OFFSET
CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR;
CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET;
#endif
#endif
/* enable instruction cache now */
icache_enable();
}
/*initialize higher level parts of CPU like timers */
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
break;
case 1:
break;
case 2:
break;
}
}
#endif /* #if defined(CONFIG_M5253) */
#if defined(CONFIG_M5271)
void cpu_init_f(void)
{
#ifndef CONFIG_WATCHDOG
/* Disable the watchdog if we aren't using it */
mbar_writeShort(MCF_WTM_WCR, 0);
#endif
/* FlexBus Chipselect */
init_fbcs();
/* Set clockspeed to 100MHz */
mbar_writeShort(MCF_FMPLL_SYNCR,
MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK) ;
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
MCF_GPIO_PAR_UART_U0RXD);
break;
case 1:
mbar_writeShort(MCF_GPIO_PAR_UART,
MCF_GPIO_PAR_UART_U1RXD_UART1 |
MCF_GPIO_PAR_UART_U1TXD_UART1);
break;
case 2:
mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000);
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
if (setclear) {
/* Enable Ethernet pins */
mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
} else {
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif
#if defined(CONFIG_M5272)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/* if we come from RAM we assume the CPU is
* already initialized.
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR);
volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO);
volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS);
sysctrl->sc_scr = CONFIG_SYS_SCR;
sysctrl->sc_spr = CONFIG_SYS_SPR;
/* Setup Ports: */
gpio->gpio_pacnt = CONFIG_SYS_PACNT;
gpio->gpio_paddr = CONFIG_SYS_PADDR;
gpio->gpio_padat = CONFIG_SYS_PADAT;
gpio->gpio_pbcnt = CONFIG_SYS_PBCNT;
gpio->gpio_pbddr = CONFIG_SYS_PBDDR;
gpio->gpio_pbdat = CONFIG_SYS_PBDAT;
gpio->gpio_pdcnt = CONFIG_SYS_PDCNT;
/* Memory Controller: */
csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM;
csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM;
#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM;
csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM;
#endif
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM;
csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM;
#endif
#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM;
csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM;
#endif
#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM;
csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM;
#endif
#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM;
csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM;
#endif
#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM;
csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM;
#endif
#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM;
csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM;
#endif
#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK);
gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD);
break;
case 1:
gpio->gpio_pdcnt &= ~(GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK);
gpio->gpio_pdcnt |= (GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD);
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
if (setclear) {
gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
} else {
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* #if defined(CONFIG_M5272) */
#if defined(CONFIG_M5275)
/*
* Breathe some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/*
* if we come from RAM we assume the CPU is
* already initialized.
*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
volatile wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
volatile gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
/* Kill watchdog so we can initialize the PLL */
wdog_reg->wcr = 0;
/* FlexBus Chipselect */
init_fbcs();
#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
#ifdef CONFIG_FSL_I2C
CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR;
CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
#endif
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
gpio->par_uart |= UART0_ENABLE_MASK;
break;
case 1:
gpio->par_uart |= UART1_ENABLE_MASK;
break;
case 2:
gpio->par_uart |= UART2_ENABLE_MASK;
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
struct fec_info_s *info = (struct fec_info_s *) dev->priv;
volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
if (setclear) {
/* Enable Ethernet pins */
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
gpio->par_feci2c |= 0x0F00;
gpio->par_fec0hl |= 0xC0;
} else {
gpio->par_feci2c |= 0x00A0;
gpio->par_fec1hl |= 0xC0;
}
} else {
if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
gpio->par_feci2c &= ~0x0F00;
gpio->par_fec0hl &= ~0xC0;
} else {
gpio->par_feci2c &= ~0x00A0;
gpio->par_fec1hl &= ~0xC0;
}
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif /* #if defined(CONFIG_M5275) */
#if defined(CONFIG_M5282)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
#ifndef CONFIG_WATCHDOG
/* disable watchdog if we aren't using it */
MCFWTM_WCR = 0;
#endif
#ifndef CONFIG_MONITOR_IS_IN_RAM
/* Set speed /PLL */
MCFCLOCK_SYNCR =
MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) |
MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ;
MCFGPIO_PBCDPAR = 0xc0;
/* Set up the GPIO ports */
#ifdef CONFIG_SYS_PEPAR
MCFGPIO_PEPAR = CONFIG_SYS_PEPAR;
#endif
#ifdef CONFIG_SYS_PFPAR
MCFGPIO_PFPAR = CONFIG_SYS_PFPAR;
#endif
#ifdef CONFIG_SYS_PJPAR
MCFGPIO_PJPAR = CONFIG_SYS_PJPAR;
#endif
#ifdef CONFIG_SYS_PSDPAR
MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR;
#endif
#ifdef CONFIG_SYS_PASPAR
MCFGPIO_PASPAR = CONFIG_SYS_PASPAR;
#endif
#ifdef CONFIG_SYS_PEHLPAR
MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
#endif
#ifdef CONFIG_SYS_PQSPAR
MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR;
#endif
#ifdef CONFIG_SYS_PTCPAR
MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR;
#endif
#ifdef CONFIG_SYS_PTDPAR
MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR;
#endif
#ifdef CONFIG_SYS_PUAPAR
MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR;
#endif
#ifdef CONFIG_SYS_DDRUA
MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
#endif
/* FlexBus Chipselect */
init_fbcs();
#endif /* CONFIG_MONITOR_IS_IN_RAM */
/* defer enabling cache until boot (see do_go) */
/* icache_enable(); */
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
MCFGPIO_PUAPAR &= 0xFc;
MCFGPIO_PUAPAR |= 0x03;
break;
case 1:
MCFGPIO_PUAPAR &= 0xF3;
MCFGPIO_PUAPAR |= 0x0C;
break;
case 2:
MCFGPIO_PASPAR &= 0xFF0F;
MCFGPIO_PASPAR |= 0x00A0;
break;
}
}
#if defined(CONFIG_CMD_NET)
int fecpin_setclear(struct eth_device *dev, int setclear)
{
if (setclear) {
MCFGPIO_PASPAR |= 0x0F00;
MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
} else {
MCFGPIO_PASPAR &= 0xF0FF;
MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
}
return 0;
}
#endif /* CONFIG_CMD_NET */
#endif
#if defined(CONFIG_M5249)
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f(void)
{
/*
* NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
* (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
* which is their primary function.
* ~Jeremy
*/
mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC);
mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC);
mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN);
mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN);
mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT);
mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT);
/*
* dBug Compliance:
* You can verify these values by using dBug's 'ird'
* (Internal Register Display) command
* ~Jeremy
*
*/
mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */
mbar_writeByte(MCFSIM_SYPCR, 0x00);
mbar_writeByte(MCFSIM_SWIVR, 0x0f);
mbar_writeByte(MCFSIM_SWSR, 0x00);
mbar_writeLong(MCFSIM_IMR, 0xfffffbff);
mbar_writeByte(MCFSIM_SWDICR, 0x00);
mbar_writeByte(MCFSIM_TIMER1ICR, 0x00);
mbar_writeByte(MCFSIM_TIMER2ICR, 0x88);
mbar_writeByte(MCFSIM_I2CICR, 0x00);
mbar_writeByte(MCFSIM_UART1ICR, 0x00);
mbar_writeByte(MCFSIM_UART2ICR, 0x00);
mbar_writeByte(MCFSIM_ICR6, 0x00);
mbar_writeByte(MCFSIM_ICR7, 0x00);
mbar_writeByte(MCFSIM_ICR8, 0x00);
mbar_writeByte(MCFSIM_ICR9, 0x00);
mbar_writeByte(MCFSIM_QSPIICR, 0x00);
mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */
mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */
/* Setup interrupt priorities for gpio7 */
/* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
/* IDE Config registers */
mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
/* FlexBus Chipselect */
init_fbcs();
/* enable instruction cache now */
icache_enable();
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r(void)
{
return (0);
}
void uart_port_conf(void)
{
/* Setup Ports: */
switch (CONFIG_SYS_UART_PORT) {
case 0:
break;
case 1:
break;
}
}
#endif /* #if defined(CONFIG_M5249) */