| /* |
| * arch/ppc/kernel/pci_auto.c |
| * |
| * PCI autoconfiguration library |
| * |
| * Author: Matt Porter <mporter@mvista.com> |
| * |
| * Copyright 2000 MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <common.h> |
| |
| #ifdef CONFIG_PCI |
| |
| #include <pci.h> |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DEBUGF(x...) printf(x) |
| #else |
| #define DEBUGF(x...) |
| #endif /* DEBUG */ |
| |
| #define PCIAUTO_IDE_MODE_MASK 0x05 |
| |
| /* |
| * |
| */ |
| |
| void pciauto_region_init(struct pci_region* res) |
| { |
| res->bus_lower = res->bus_start; |
| } |
| |
| void pciauto_region_align(struct pci_region *res, unsigned long size) |
| { |
| res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1; |
| } |
| |
| int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar) |
| { |
| unsigned long addr; |
| |
| if (!res) { |
| DEBUGF("No resource"); |
| goto error; |
| } |
| |
| addr = ((res->bus_lower - 1) | (size - 1)) + 1; |
| |
| if (addr - res->bus_start + size > res->size) { |
| DEBUGF("No room in resource"); |
| goto error; |
| } |
| |
| res->bus_lower = addr + size; |
| |
| DEBUGF("address=0x%lx", addr); |
| |
| *bar = addr; |
| return 0; |
| |
| error: |
| *bar = 0xffffffff; |
| return -1; |
| } |
| |
| /* |
| * |
| */ |
| |
| void pciauto_setup_device(struct pci_controller *hose, |
| pci_dev_t dev, int bars_num, |
| struct pci_region *mem, |
| struct pci_region *prefetch, |
| struct pci_region *io) |
| { |
| unsigned int bar_value, bar_response, bar_size; |
| unsigned int cmdstat = 0; |
| struct pci_region *bar_res; |
| int bar, bar_nr = 0; |
| int found_mem64 = 0; |
| |
| pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); |
| cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER; |
| |
| for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) { |
| /* Tickle the BAR and get the response */ |
| pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); |
| pci_hose_read_config_dword(hose, dev, bar, &bar_response); |
| |
| /* If BAR is not implemented go to the next BAR */ |
| if (!bar_response) |
| continue; |
| |
| found_mem64 = 0; |
| |
| /* Check the BAR type and set our address mask */ |
| if (bar_response & PCI_BASE_ADDRESS_SPACE) { |
| bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK)) |
| & 0xffff) + 1; |
| bar_res = io; |
| |
| DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%x, ", bar_nr, bar_size); |
| } else { |
| if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == |
| PCI_BASE_ADDRESS_MEM_TYPE_64) |
| found_mem64 = 1; |
| |
| bar_size = ~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1; |
| if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) |
| bar_res = prefetch; |
| else |
| bar_res = mem; |
| |
| DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%x, ", bar_nr, bar_size); |
| } |
| |
| if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) { |
| /* Write it out and update our limit */ |
| pci_hose_write_config_dword(hose, dev, bar, bar_value); |
| |
| /* |
| * If we are a 64-bit decoder then increment to the |
| * upper 32 bits of the bar and force it to locate |
| * in the lower 4GB of memory. |
| */ |
| if (found_mem64) { |
| bar += 4; |
| pci_hose_write_config_dword(hose, dev, bar, 0x00000000); |
| } |
| |
| cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? |
| PCI_COMMAND_IO : PCI_COMMAND_MEMORY; |
| } |
| |
| DEBUGF("\n"); |
| |
| bar_nr++; |
| } |
| |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); |
| pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); |
| } |
| |
| static void pciauto_prescan_setup_bridge(struct pci_controller *hose, |
| pci_dev_t dev, int sub_bus) |
| { |
| struct pci_region *pci_mem = hose->pci_mem; |
| struct pci_region *pci_prefetch = hose->pci_prefetch; |
| struct pci_region *pci_io = hose->pci_io; |
| unsigned int cmdstat; |
| |
| pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); |
| |
| /* Configure bus number registers */ |
| pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev)); |
| pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus); |
| pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff); |
| |
| if (pci_mem) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_mem, 0x100000); |
| |
| /* Set up memory and I/O filter limits, assume 32-bit I/O space */ |
| pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE, |
| (pci_mem->bus_lower & 0xfff00000) >> 16); |
| |
| cmdstat |= PCI_COMMAND_MEMORY; |
| } |
| |
| if (pci_prefetch) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_prefetch, 0x100000); |
| |
| /* Set up memory and I/O filter limits, assume 32-bit I/O space */ |
| pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, |
| (pci_prefetch->bus_lower & 0xfff00000) >> 16); |
| |
| cmdstat |= PCI_COMMAND_MEMORY; |
| } else { |
| /* We don't support prefetchable memory for now, so disable */ |
| pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000); |
| pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x1000); |
| } |
| |
| if (pci_io) { |
| /* Round I/O allocator to 4KB boundary */ |
| pciauto_region_align(pci_io, 0x1000); |
| |
| pci_hose_write_config_byte(hose, dev, PCI_IO_BASE, |
| (pci_io->bus_lower & 0x0000f000) >> 8); |
| pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16, |
| (pci_io->bus_lower & 0xffff0000) >> 16); |
| |
| cmdstat |= PCI_COMMAND_IO; |
| } |
| |
| /* Enable memory and I/O accesses, enable bus master */ |
| pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); |
| } |
| |
| static void pciauto_postscan_setup_bridge(struct pci_controller *hose, |
| pci_dev_t dev, int sub_bus) |
| { |
| struct pci_region *pci_mem = hose->pci_mem; |
| struct pci_region *pci_prefetch = hose->pci_prefetch; |
| struct pci_region *pci_io = hose->pci_io; |
| |
| /* Configure bus number registers */ |
| pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, sub_bus); |
| |
| if (pci_mem) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_mem, 0x100000); |
| |
| pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT, |
| (pci_mem->bus_lower-1) >> 16); |
| } |
| |
| if (pci_prefetch) { |
| /* Round memory allocator to 1MB boundary */ |
| pciauto_region_align(pci_prefetch, 0x100000); |
| |
| pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, |
| (pci_prefetch->bus_lower-1) >> 16); |
| } |
| |
| if (pci_io) { |
| /* Round I/O allocator to 4KB boundary */ |
| pciauto_region_align(pci_io, 0x1000); |
| |
| pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT, |
| ((pci_io->bus_lower-1) & 0x0000f000) >> 8); |
| pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16, |
| ((pci_io->bus_lower-1) & 0xffff0000) >> 16); |
| } |
| } |
| |
| /* |
| * |
| */ |
| |
| void pciauto_config_init(struct pci_controller *hose) |
| { |
| int i; |
| |
| hose->pci_io = hose->pci_mem = NULL; |
| |
| for (i=0; i<hose->region_count; i++) { |
| switch(hose->regions[i].flags) { |
| case PCI_REGION_IO: |
| if (!hose->pci_io || |
| hose->pci_io->size < hose->regions[i].size) |
| hose->pci_io = hose->regions + i; |
| break; |
| case PCI_REGION_MEM: |
| if (!hose->pci_mem || |
| hose->pci_mem->size < hose->regions[i].size) |
| hose->pci_mem = hose->regions + i; |
| break; |
| case (PCI_REGION_MEM | PCI_REGION_PREFETCH): |
| if (!hose->pci_prefetch || |
| hose->pci_prefetch->size < hose->regions[i].size) |
| hose->pci_prefetch = hose->regions + i; |
| break; |
| } |
| } |
| |
| |
| if (hose->pci_mem) { |
| pciauto_region_init(hose->pci_mem); |
| |
| DEBUGF("PCI Autoconfig: Memory region: [%lx-%lx]\n", |
| hose->pci_mem->bus_start, |
| hose->pci_mem->bus_start + hose->pci_mem->size - 1); |
| } |
| |
| if (hose->pci_prefetch) { |
| pciauto_region_init(hose->pci_prefetch); |
| |
| DEBUGF("PCI Autoconfig: Prefetchable Memory region: [%lx-%lx]\n", |
| hose->pci_prefetch->bus_start, |
| hose->pci_prefetch->bus_start + hose->pci_prefetch->size - 1); |
| } |
| |
| if (hose->pci_io) { |
| pciauto_region_init(hose->pci_io); |
| |
| DEBUGF("PCI Autoconfig: I/O region: [%lx-%lx]\n", |
| hose->pci_io->bus_start, |
| hose->pci_io->bus_start + hose->pci_io->size - 1); |
| } |
| } |
| |
| /* HJF: Changed this to return int. I think this is required |
| * to get the correct result when scanning bridges |
| */ |
| int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) |
| { |
| unsigned int sub_bus = PCI_BUS(dev); |
| unsigned short class; |
| unsigned char prg_iface; |
| int n; |
| |
| pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); |
| |
| switch(class) { |
| case PCI_CLASS_BRIDGE_PCI: |
| hose->current_busno++; |
| pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io); |
| |
| DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); |
| |
| /* Passing in current_busno allows for sibling P2P bridges */ |
| pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); |
| /* |
| * need to figure out if this is a subordinate bridge on the bus |
| * to be able to properly set the pri/sec/sub bridge registers. |
| */ |
| n = pci_hose_scan_bus(hose, hose->current_busno); |
| |
| /* figure out the deepest we've gone for this leg */ |
| sub_bus = max(n, sub_bus); |
| pciauto_postscan_setup_bridge(hose, dev, sub_bus); |
| |
| sub_bus = hose->current_busno; |
| break; |
| |
| case PCI_CLASS_STORAGE_IDE: |
| pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface); |
| if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { |
| DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n"); |
| return sub_bus; |
| } |
| |
| pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); |
| break; |
| |
| case PCI_CLASS_BRIDGE_CARDBUS: |
| /* just do a minimal setup of the bridge, let the OS take care of the rest */ |
| pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); |
| |
| DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); |
| |
| hose->current_busno++; |
| break; |
| |
| #ifdef CONFIG_MPC5200 |
| case PCI_CLASS_BRIDGE_OTHER: |
| DEBUGF("PCI Autoconfig: Skipping bridge device %d\n", |
| PCI_DEV(dev)); |
| break; |
| #endif |
| #ifdef CONFIG_MPC834X |
| case PCI_CLASS_BRIDGE_OTHER: |
| /* |
| * The host/PCI bridge 1 seems broken in 8349 - it presents |
| * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_ |
| * device claiming resources io/mem/irq.. we only allow for |
| * the PIMMR window to be allocated (BAR0 - 1MB size) |
| */ |
| DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n"); |
| pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); |
| break; |
| #endif |
| default: |
| pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); |
| break; |
| } |
| |
| return sub_bus; |
| } |
| |
| #endif /* CONFIG_PCI */ |