include/configs/eb_cpux9k2.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2008-2009
  * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
  * Jens Scharsig <esw@bus-elektronik.de>
  *
  * Configuation settings for the EB+CPUx9K2 board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef _CONFIG_EB_CPUx9K2_H_
 #define _CONFIG_EB_CPUx9K2_H_

 /*--------------------------------------------------------------------------*/

 #define CONFIG_AT91RM9200		/* It's an Atmel AT91RM9200 SoC	*/
 #define CONFIG_EB_CPUX9K2		/* on an EP+CPUX9K2 Board	*/
 #define USE_920T_MMU

 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_IDENT_STRING	" on EB+CPUx9K2"

 #include <asm/hardware.h>	/* needed for port definitions */

 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F

 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2

 #define CONFIG_SYS_CACHELINE_SIZE	32
 #define CONFIG_SYS_DCACHE_OFF

 /*--------------------------------------------------------------------------*/
 #ifndef CONFIG_RAMBOOT
 #define CONFIG_SYS_TEXT_BASE		0x00000000
 #else
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_TEXT_BASE		0x21f00000
 #endif
 #define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
 #define CONFIG_STANDALONE_LOAD_ADDR	0x21000000

 #define CONFIG_SYS_BOOT_SIZE		0x00 /* 0 KBytes */
 #define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */

 #define CONFIG_BOOT_RETRY_TIME		30
 #define CONFIG_CMDLINE_EDITING

 #define CONFIG_SYS_PROMPT	"U-Boot> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS	32		/* max number of command args */
 #define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

 /*
  * ARM asynchronous clock
  */

 #define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
 #define CONFIG_SYS_HZ		1000
 #define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)

 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */

 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1

 #define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
 /* flash */
 #define CONFIG_SYS_EBI_CFGR_VAL		0x00000000
 #define CONFIG_SYS_SMC_CSR0_VAL		0x00003284 /* 16bit, 2 TDF, 4 WS */

 /* clocks */
 #define CONFIG_SYS_PLLAR_VAL		0x20483E05 /* 179.4048 MHz for PCK */
 #define CONFIG_SYS_PLLBR_VAL		0x104C3E0A /* 47.3088 MHz (for USB) */
 #define CONFIG_SYS_MCKR_VAL		0x00000202 /* PCK/3 = MCK Clock */

 /*
  * Size of malloc() pool
  */

 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 520*1024)

 /*
  * sdram
  */

 #define CONFIG_NR_DRAM_BANKS		1

 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x04000000  /* 64 megs */
 #define CONFIG_SYS_INIT_SP_ADDR		0x00204000  /* use internal SRAM */

 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
 					CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
 					CONFIG_SYS_MALLOC_LEN)

 #define CONFIG_SYS_PIOC_ASR_VAL		0xFFFF0000 /* PIOC as D16/D31 */
 #define CONFIG_SYS_PIOC_BSR_VAL		0x00000000
 #define CONFIG_SYS_PIOC_PDR_VAL		0xFFFF0000
 #define CONFIG_SYS_EBI_CSA_VAL		0x00000002 /* CS1=SDRAM */
 #define CONFIG_SYS_SDRC_CR_VAL		0x2188c159 /* set up the SDRAM */
 #define CONFIG_SYS_SDRAM		0x20000000 /* address of the SDRAM */
 #define CONFIG_SYS_SDRAM1		0x20000080 /* address of the SDRAM */
 #define CONFIG_SYS_SDRAM_VAL		0x00000000 /* value written to SDRAM */
 #define CONFIG_SYS_SDRC_MR_VAL		0x00000002 /* Precharge All */
 #define CONFIG_SYS_SDRC_MR_VAL1		0x00000004 /* refresh */
 #define CONFIG_SYS_SDRC_MR_VAL2		0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3		0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL		0x000002E0 /* Write refresh rate */

 /*
  * Command line configuration
  */

 #include <config_cmd_default.h>

 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_I2C_CMD_TREE
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_UBIFS
 #define CONFIG_SYS_LONGHELP

 /*
  * MTD defines
  */

 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_RBTREE
 #define CONFIG_LZO

 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=atmel_nand"
 #define MTDPARTS_DEFAULT	"mtdparts="				\
 					"physmap-flash.0:"		\
 						"512k(U-Boot),"		\
 						"128k(Env),"		\
 						"128k(Splash),"		\
 						"4M(Kernel),"		\
 						"384k(MiniFS),"		\
 						"-(FS)"			\
 					";"				\
 					"atmel_nand:"			\
 						"1M(emergency),"	\
 						"-(data)"
 /*
  * Hardware drivers
  */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_AT91C_PQFP_UHPBUG
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 #define CONFIG_EFI_PARTITION

 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"

 /*
  * UART/CONSOLE
  */

 #define CONFIG_BAUDRATE 115200
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE	ATMEL_BASE_DBGU
 #define CONFIG_USART_ID		0/* ignored in arm */

 /*
  * network
  */

 #define CONFIG_NET_RETRY_COUNT		10
 #define CONFIG_RESET_PHY_R		1

 #define CONFIG_DRIVER_AT91EMAC		1
 #define CONFIG_DRIVER_AT91EMAC_QUIET	1
 #define CONFIG_SYS_RX_ETH_BUFFER	8
 #define CONFIG_MII			1

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /*
  * I2C-Bus
  */

 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0

 /* Software  I2C driver configuration */

 #define AT91_PIN_SDA			(1<<25)		/* AT91C_PIO_PA25 */
 #define AT91_PIN_SCL			(1<<26)		/* AT91C_PIO_PA26 */

 #define CONFIG_SYS_I2C_INIT_BOARD

 #define I2C_INIT	i2c_init_board();
 #define I2C_ACTIVE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
 #define I2C_TRISTATE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
 #define I2C_READ	((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
 #define I2C_SDA(bit)						\
 	if (bit)						\
 		writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr);	\
 	else							\
 		writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
 #define I2C_SCL(bit)						\
 	if (bit)						\
 		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr);	\
 	else							\
 		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);

 #define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)

 /* I2C-RTC */

 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1338
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif

 /* EEPROM */

 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50

 /* FLASH organization */

 /*  NOR-FLASH */
 #define CONFIG_FLASH_SHOW_PROGRESS	45

 #define CONFIG_FLASH_CFI_DRIVER	1

 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x01000000  /* 16 megs main flash */
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT

 #define CONFIG_SYS_FLASH_PROTECTION	1
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	512
 #define CONFIG_SYS_FLASH_ERASE_TOUT	6000
 #define CONFIG_SYS_FLASH_WRITE_TOUT	2000

 /* NAND */

 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_DBW_8		1

 /* Status LED's */

 #define CONFIG_STATUS_LED		1
 #define CONFIG_BOARD_SPECIFIC_LED	1

 #define STATUS_LED_BOOT			1
 #define STATUS_LED_ACTIVE		0

 #define STATUS_LED_BIT			1	/* AT91C_PIO_PD0 green LED */
 #define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE 		STATUS_LED_OFF		/* BLINKING */
 #define STATUS_LED_BIT1			2	/* AT91C_PIO_PD1  red LED */
 #define STATUS_LED_STATE1		STATUS_LED_ON		/* BLINKING */
 #define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 4)

 #define	CONFIG_VIDEO			1

 /* Options */

 #ifdef CONFIG_VIDEO

 #define CONFIG_VIDEO_VCXK			1

 #define CONFIG_SPLASH_SCREEN			1

 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	4
 #define CONFIG_SYS_VCXK_BASE	0x30000000

 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN		(1<<3)
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	piob
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		odr

 #define CONFIG_SYS_VCXK_ENABLE_PIN		(1<<5)
 #define CONFIG_SYS_VCXK_ENABLE_PORT		piob
 #define CONFIG_SYS_VCXK_ENABLE_DDR		oer

 #define CONFIG_SYS_VCXK_REQUEST_PIN		(1<<2)
 #define CONFIG_SYS_VCXK_REQUEST_PORT		piob
 #define CONFIG_SYS_VCXK_REQUEST_DDR		oer

 #define CONFIG_SYS_VCXK_INVERT_PIN		(1<<4)
 #define CONFIG_SYS_VCXK_INVERT_PORT		piob
 #define CONFIG_SYS_VCXK_INVERT_DDR		oer

 #define CONFIG_SYS_VCXK_RESET_PIN		(1<<6)
 #define CONFIG_SYS_VCXK_RESET_PORT		piob
 #define CONFIG_SYS_VCXK_RESET_DDR		oer

 #endif	/* CONFIG_VIDEO */

 /* Environment */

 #define CONFIG_BOOTDELAY		5

 #define CONFIG_ENV_IS_IN_FLASH		1
 #define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x80000)
 #define CONFIG_ENV_SIZE			0x20000 /* sectors are 128K here */

 #define CONFIG_BAUDRATE 		115200

 #define CONFIG_BOOTCOMMAND		"run nfsboot"

 #define CONFIG_NFSBOOTCOMMAND 						\
 		"dhcp $(copy_addr) uImage_cpux9k2;"			\
 		"run bootargsdefaults;"					\
 		"set bootargs $(bootargs) boot=nfs "			\
 		";echo $(bootargs)"					\
 	";bootm"

 #define CONFIG_EXTRA_ENV_SETTINGS 					\
 	"displaywidth=256\0"						\
 	"displayheight=512\0"						\
 	"displaybsteps=1023\0"						\
 	"ubootaddr=10000000\0"						\
 	"splashimage=100A0000\0"					\
 	"kerneladdr=100C0000\0"						\
 	"kernelsize=00400000\0"						\
 	"rootfsaddr=10520000\0"						\
 	"copy_addr=21200000\0"						\
 	"rootfssize=00AE0000\0"						\
 	"mtdids=" MTDIDS_DEFAULT "\0"					\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
 	"bootargsdefaults=set bootargs "				\
 		"console=ttyS0,115200 "					\
 		"video=vcxk_fb:xres:${displaywidth},"			\
 			"yres:${displayheight},"			\
 			"bres:${displaybsteps} "			\
 		"mem=62M "						\
 		"panic=10 "						\
 		"uboot=\\\"${ver}\\\" "					\
 		"\0"							\
 	"update_kernel=protect off $(kerneladdr) +$(kernelsize);"	\
 		"dhcp $(copy_addr) uImage_cpux9k2;"			\
 		"erase $(kerneladdr) +$(kernelsize);"			\
 		"cp.b $(fileaddr) $(kerneladdr) $(filesize);"		\
 		"protect on $(kerneladdr) +$(kernelsize)"		\
 		"\0"							\
 	"update_root=protect off $(rootfsaddr) +$(rootfssize);"		\
 		"dhcp $(copy_addr) rfs;"				\
 		"erase $(rootfsaddr) +$(rootfssize);"			\
 		"cp.b $(fileaddr) $(rootfsaddr) $(filesize);"		\
 		"\0"							\
 	"update_uboot=protect off 10000000 1007FFFF;"			\
 		"dhcp $(copy_addr) u-boot_eb_cpux9k2;"			\
 		"erase 10000000 1007FFFF;"				\
 		"cp.b $(fileaddr) $(ubootaddr) $(filesize);"		\
 		"protect on 10000000 1007FFFF;reset\0"			\
 	"update_splash=protect off $(splashimage) +20000;"		\
 		"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;"		\
 		"erase $(splashimage) +20000;"				\
 		"cp.b $(fileaddr) $(splashimage) $(filesize);"		\
 		"protect on $(splashimage) +20000;reset\0"		\
 	"emergency=run bootargsdefaults;"				\
 		"set bootargs $(bootargs) root=initramfs boot=emergency " \
 		";bootm $(kerneladdr)\0"				\
 	"netemergency=run bootargsdefaults;"				\
 		"dhcp $(copy_addr) uImage_cpux9k2;"			\
 		"set bootargs $(bootargs) root=initramfs boot=emergency " \
 		";bootm $(copy_addr)\0"					\
 	"norboot=run bootargsdefaults;"					\
 		"set bootargs $(bootargs) root=initramfs boot=local "	\
 		";bootm $(kerneladdr)\0"				\
 	"nandboot=run bootargsdefaults;"				\
 		"set bootargs $(bootargs) root=initramfs boot=nand "	\
 		";bootm $(kerneladdr)\0"				\
 	" "

 /*--------------------------------------------------------------------------*/

 #endif

 /* EOF */
	/*
	* (C) Copyright 2008-2009
	* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
	* Jens Scharsig <esw@bus-elektronik.de>
	*
	* Configuation settings for the EB+CPUx9K2 board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef _CONFIG_EB_CPUx9K2_H_
	#define _CONFIG_EB_CPUx9K2_H_

	/--------------------------------------------------------------------------/

	#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */
	#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */
	#define USE_920T_MMU

	#define CONFIG_VERSION_VARIABLE
	#define CONFIG_IDENT_STRING " on EB+CPUx9K2"

	#include <asm/hardware.h> /* needed for port definitions */

	#define CONFIG_MISC_INIT_R
	#define CONFIG_BOARD_EARLY_INIT_F

	#define MACH_TYPE_EB_CPUX9K2 1977
	#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2

	#define CONFIG_SYS_CACHELINE_SIZE 32
	#define CONFIG_SYS_DCACHE_OFF

	/--------------------------------------------------------------------------/
	#ifndef CONFIG_RAMBOOT
	#define CONFIG_SYS_TEXT_BASE 0x00000000
	#else
	#define CONFIG_SKIP_LOWLEVEL_INIT
	#define CONFIG_SYS_TEXT_BASE 0x21f00000
	#endif
	#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
	#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000

	#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
	#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
	#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */

	#define CONFIG_BOOT_RETRY_TIME 30
	#define CONFIG_CMDLINE_EDITING

	#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */

	/*
	* ARM asynchronous clock
	*/

	#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */
	#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
	#define CONFIG_SYS_HZ 1000
	#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)

	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */

	#define CONFIG_CMDLINE_TAG 1
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
	/* flash */
	#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
	#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */

	/* clocks */
	#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */
	#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */
	#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */

	/*
	* Size of malloc() pool
	*/

	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 520*1024)

	/*
	* sdram
	*/

	#define CONFIG_NR_DRAM_BANKS 1

	#define CONFIG_SYS_SDRAM_BASE 0x20000000
	#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
	#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */

	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
	CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
	CONFIG_SYS_MALLOC_LEN)

	#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */
	#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
	#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
	#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
	#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */
	#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
	#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
	#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
	#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
	#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
	#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
	#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
	#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */

	/*
	* Command line configuration
	*/

	#include <config_cmd_default.h>

	#define CONFIG_CMD_BMP
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_PING
	#define CONFIG_I2C_CMD_TREE
	#define CONFIG_CMD_USB
	#define CONFIG_CMD_FAT
	#define CONFIG_CMD_UBI
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_CMD_UBIFS
	#define CONFIG_SYS_LONGHELP

	/*
	* MTD defines
	*/

	#define CONFIG_FLASH_CFI_MTD
	#define CONFIG_MTD_DEVICE
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_RBTREE
	#define CONFIG_LZO

	#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand"
	#define MTDPARTS_DEFAULT "mtdparts=" \
	"physmap-flash.0:" \
	"512k(U-Boot)," \
	"128k(Env)," \
	"128k(Splash)," \
	"4M(Kernel)," \
	"384k(MiniFS)," \
	"-(FS)" \
	";" \
	"atmel_nand:" \
	"1M(emergency)," \
	"-(data)"
	/*
	* Hardware drivers
	*/
	#define CONFIG_USB_ATMEL
	#define CONFIG_USB_OHCI_NEW
	#define CONFIG_AT91C_PQFP_UHPBUG
	#define CONFIG_USB_STORAGE
	#define CONFIG_DOS_PARTITION
	#define CONFIG_ISO_PARTITION
	#define CONFIG_EFI_PARTITION

	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
	#define CONFIG_SYS_USB_OHCI_CPU_INIT
	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"

	/*
	* UART/CONSOLE
	*/

	#define CONFIG_BAUDRATE 115200
	#define CONFIG_ATMEL_USART
	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	#define CONFIG_USART_ID 0/* ignored in arm */

	/*
	* network
	*/

	#define CONFIG_NET_RETRY_COUNT 10
	#define CONFIG_RESET_PHY_R 1

	#define CONFIG_DRIVER_AT91EMAC 1
	#define CONFIG_DRIVER_AT91EMAC_QUIET 1
	#define CONFIG_SYS_RX_ETH_BUFFER 8
	#define CONFIG_MII 1

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* I2C-Bus
	*/

	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
	#define CONFIG_SYS_I2C_SOFT_SPEED 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0

	/* Software I2C driver configuration */

	#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */
	#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */

	#define CONFIG_SYS_I2C_INIT_BOARD

	#define I2C_INIT i2c_init_board();
	#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
	#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
	#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
	#define I2C_SDA(bit) \
	if (bit) \
	writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \
	else \
	writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
	#define I2C_SCL(bit) \
	if (bit) \
	writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \
	else \
	writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);

	#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)

	/* I2C-RTC */

	#ifdef CONFIG_CMD_DATE
	#define CONFIG_RTC_DS1338
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#endif

	/* EEPROM */

	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50

	/* FLASH organization */

	/* NOR-FLASH */
	#define CONFIG_FLASH_SHOW_PROGRESS 45

	#define CONFIG_FLASH_CFI_DRIVER 1

	#define PHYS_FLASH_1 0x10000000
	#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */
	#define CONFIG_SYS_FLASH_CFI 1
	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT

	#define CONFIG_SYS_FLASH_PROTECTION 1
	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_MAX_FLASH_SECT 512
	#define CONFIG_SYS_FLASH_ERASE_TOUT 6000
	#define CONFIG_SYS_FLASH_WRITE_TOUT 2000

	/* NAND */

	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_DBW_8 1

	/* Status LED's */

	#define CONFIG_STATUS_LED 1
	#define CONFIG_BOARD_SPECIFIC_LED 1

	#define STATUS_LED_BOOT 1
	#define STATUS_LED_ACTIVE 0

	#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */
	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */
	#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */
	#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */
	#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4)

	#define CONFIG_VIDEO 1

	/* Options */

	#ifdef CONFIG_VIDEO

	#define CONFIG_VIDEO_VCXK 1

	#define CONFIG_SPLASH_SCREEN 1

	#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4
	#define CONFIG_SYS_VCXK_BASE 0x30000000

	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3)
	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob
	#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr

	#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5)
	#define CONFIG_SYS_VCXK_ENABLE_PORT piob
	#define CONFIG_SYS_VCXK_ENABLE_DDR oer

	#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2)
	#define CONFIG_SYS_VCXK_REQUEST_PORT piob
	#define CONFIG_SYS_VCXK_REQUEST_DDR oer

	#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4)
	#define CONFIG_SYS_VCXK_INVERT_PORT piob
	#define CONFIG_SYS_VCXK_INVERT_DDR oer

	#define CONFIG_SYS_VCXK_RESET_PIN (1<<6)
	#define CONFIG_SYS_VCXK_RESET_PORT piob
	#define CONFIG_SYS_VCXK_RESET_DDR oer

	#endif /* CONFIG_VIDEO */

	/* Environment */

	#define CONFIG_BOOTDELAY 5

	#define CONFIG_ENV_IS_IN_FLASH 1
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000)
	#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */

	#define CONFIG_BAUDRATE 115200

	#define CONFIG_BOOTCOMMAND "run nfsboot"

	#define CONFIG_NFSBOOTCOMMAND \
	"dhcp $(copy_addr) uImage_cpux9k2;" \
	"run bootargsdefaults;" \
	"set bootargs $(bootargs) boot=nfs " \
	";echo $(bootargs)" \
	";bootm"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"displaywidth=256\0" \
	"displayheight=512\0" \
	"displaybsteps=1023\0" \
	"ubootaddr=10000000\0" \
	"splashimage=100A0000\0" \
	"kerneladdr=100C0000\0" \
	"kernelsize=00400000\0" \
	"rootfsaddr=10520000\0" \
	"copy_addr=21200000\0" \
	"rootfssize=00AE0000\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"bootargsdefaults=set bootargs " \
	"console=ttyS0,115200 " \
	"video=vcxk_fb:xres:${displaywidth}," \
	"yres:${displayheight}," \
	"bres:${displaybsteps} " \
	"mem=62M " \
	"panic=10 " \
	"uboot=\\\"${ver}\\\" " \
	"\0" \
	"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
	"dhcp $(copy_addr) uImage_cpux9k2;" \
	"erase $(kerneladdr) +$(kernelsize);" \
	"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
	"protect on $(kerneladdr) +$(kernelsize)" \
	"\0" \
	"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
	"dhcp $(copy_addr) rfs;" \
	"erase $(rootfsaddr) +$(rootfssize);" \
	"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
	"\0" \
	"update_uboot=protect off 10000000 1007FFFF;" \
	"dhcp $(copy_addr) u-boot_eb_cpux9k2;" \
	"erase 10000000 1007FFFF;" \
	"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
	"protect on 10000000 1007FFFF;reset\0" \
	"update_splash=protect off $(splashimage) +20000;" \
	"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \
	"erase $(splashimage) +20000;" \
	"cp.b $(fileaddr) $(splashimage) $(filesize);" \
	"protect on $(splashimage) +20000;reset\0" \
	"emergency=run bootargsdefaults;" \
	"set bootargs $(bootargs) root=initramfs boot=emergency " \
	";bootm $(kerneladdr)\0" \
	"netemergency=run bootargsdefaults;" \
	"dhcp $(copy_addr) uImage_cpux9k2;" \
	"set bootargs $(bootargs) root=initramfs boot=emergency " \
	";bootm $(copy_addr)\0" \
	"norboot=run bootargsdefaults;" \
	"set bootargs $(bootargs) root=initramfs boot=local " \
	";bootm $(kerneladdr)\0" \
	"nandboot=run bootargsdefaults;" \
	"set bootargs $(bootargs) root=initramfs boot=nand " \
	";bootm $(kerneladdr)\0" \
	" "

	/--------------------------------------------------------------------------/

	#endif

	/* EOF */