| /* |
| * Copyright 2006 Freescale Semiconductor. |
| * Jeffrey Brown |
| * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) |
| */ |
| |
| #ifndef __MPC86xx_H__ |
| #define __MPC86xx_H__ |
| |
| #define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */ |
| #define _START_OFFSET EXC_OFF_SYS_RESET |
| |
| /* |
| * platform register addresses |
| */ |
| |
| #define GUTS_SVR (CFG_CCSRBAR + 0xE00A4) |
| #define MCM_ABCR (CFG_CCSRBAR + 0x01000) |
| #define MCM_DBCR (CFG_CCSRBAR + 0x01008) |
| |
| /* |
| * l2cr values. Look in config_<BOARD>.h for the actual setup |
| */ |
| #define l2cr 1017 |
| |
| #define L2CR_L2E 0x80000000 /* bit 0 - enable */ |
| #define L2CR_L2PE 0x40000000 /* bit 1 - data parity */ |
| #define L2CR_L2I 0x00200000 /* bit 10 - global invalidate bit */ |
| #define L2CR_L2CTL 0x00100000 /* bit 11 - l2 ram control */ |
| #define L2CR_L2DO 0x00010000 /* bit 15 - data-only mode */ |
| #define L2CR_REP 0x00001000 /* bit 19 - l2 replacement alg */ |
| #define L2CR_HWF 0x00000800 /* bit 20 - hardware flush */ |
| #define L2CR_L2IP 0x00000001 /* global invalidate in progress */ |
| |
| /* |
| * BAT settings. Look in config_<BOARD>.h for the actual setup |
| */ |
| |
| #define BATU_BL_128K 0x00000000 |
| #define BATU_BL_256K 0x00000004 |
| #define BATU_BL_512K 0x0000000c |
| #define BATU_BL_1M 0x0000001c |
| #define BATU_BL_2M 0x0000003c |
| #define BATU_BL_4M 0x0000007c |
| #define BATU_BL_8M 0x000000fc |
| #define BATU_BL_16M 0x000001fc |
| #define BATU_BL_32M 0x000003fc |
| #define BATU_BL_64M 0x000007fc |
| #define BATU_BL_128M 0x00000ffc |
| #define BATU_BL_256M 0x00001ffc |
| #define BATU_BL_512M 0x00003ffc |
| #define BATU_BL_1G 0x00007ffc |
| #define BATU_BL_2G 0x0000fffc |
| #define BATU_BL_4G 0x0001fffc |
| |
| #define BATU_VS 0x00000002 |
| #define BATU_VP 0x00000001 |
| #define BATU_INVALID 0x00000000 |
| |
| #define BATL_WRITETHROUGH 0x00000040 |
| #define BATL_CACHEINHIBIT 0x00000020 |
| #define BATL_MEMCOHERENCE 0x00000010 |
| #define BATL_GUARDEDSTORAGE 0x00000008 |
| #define BATL_NO_ACCESS 0x00000000 |
| |
| #define BATL_PP_MSK 0x00000003 |
| #define BATL_PP_00 0x00000000 /* No access */ |
| #define BATL_PP_01 0x00000001 /* Read-only */ |
| #define BATL_PP_10 0x00000002 /* Read-write */ |
| #define BATL_PP_11 0x00000003 |
| |
| #define BATL_PP_NO_ACCESS BATL_PP_00 |
| #define BATL_PP_RO BATL_PP_01 |
| #define BATL_PP_RW BATL_PP_10 |
| |
| #define HID0_XBSEN 0x00000100 |
| #define HID0_HIGH_BAT_EN 0x00800000 |
| #define HID0_XAEN 0x00020000 |
| |
| #ifndef __ASSEMBLY__ |
| |
| typedef struct { |
| unsigned long freqProcessor; |
| unsigned long freqSystemBus; |
| } MPC86xx_SYS_INFO; |
| |
| #define l1icache_enable icache_enable |
| |
| void l2cache_enable(void); |
| void l1dcache_enable(void); |
| |
| static __inline__ unsigned long get_hid0 (void) |
| { |
| unsigned long hid0; |
| asm volatile("mfspr %0, 1008" : "=r" (hid0) :); |
| return hid0; |
| } |
| |
| static __inline__ unsigned long get_hid1 (void) |
| { |
| unsigned long hid1; |
| asm volatile("mfspr %0, 1009" : "=r" (hid1) :); |
| return hid1; |
| } |
| |
| static __inline__ void set_hid0 (unsigned long hid0) |
| { |
| asm volatile("mtspr 1008, %0" : : "r" (hid0)); |
| } |
| |
| static __inline__ void set_hid1 (unsigned long hid1) |
| { |
| asm volatile("mtspr 1009, %0" : : "r" (hid1)); |
| } |
| |
| |
| static __inline__ unsigned long get_l2cr (void) |
| { |
| unsigned long l2cr_val; |
| asm volatile("mfspr %0, 1017" : "=r" (l2cr_val) :); |
| return l2cr_val; |
| } |
| |
| #endif /* _ASMLANGUAGE */ |
| #endif /* __MPC86xx_H__ */ |