include/configs/aristainetos.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2014
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Based on:
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __ARISTAINETOS_CONFIG_H
 #define __ARISTAINETOS_CONFIG_H

 #define CONFIG_MX6

 #include "mx6_common.h"
 #include <linux/sizes.h>

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>

 #define CONFIG_MACH_TYPE	4501
 #define CONFIG_MMCROOT		"/dev/mmcblk0p2"
 #define CONFIG_DEFAULT_FDT_FILE	"aristainetos.dtb"
 #define CONFIG_HOSTNAME		aristainetos
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)

 #define CONFIG_SYS_GENERIC_BOARD

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MXC_GPIO

 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART5_BASE
 #define CONFIG_CONSOLE_DEV	"ttymxc4"

 #define CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP

 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION

 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0

 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL

 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MTD
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		3
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200

 /* Command definition */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_SETEXPR
 #undef CONFIG_CMD_IMLS

 #define CONFIG_BOOTDELAY		3

 #define CONFIG_LOADADDR			0x12000000
 #define CONFIG_SYS_TEXT_BASE		0x17800000

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"uimage=uImage\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_addr_r=0x11000000\0" \
 	"kernel_addr_r=0x12000000\0" \
 	"kernel_file=uImage\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"mmcpart=1\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
 		"${uimage}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
 		"${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs;run loadimage loadfdt fdt_setup;" \
 		"bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
 	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
 	"nfsopts=nfsvers=3 nolock rw\0" \
 	"netdev=eth0\0" \
 	"fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
 	"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
 	"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 	"get_env=mw ${loadaddr} 0x00000000 0x20000;" \
 		"tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
 		"env import -t ${loadaddr}\0" \
 	"addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
 	"bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
 		"${optargs}\0" \
 	"net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
 		"root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 		"${hostname}:${netdev}:off\0" \
 	"net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
 		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
 	"uboot=/tftpboot/aristainetos/u-boot.imx\0" \
 	"load_uboot=tftp ${loadaddr} ${uboot}\0" \
 	"uboot_sz=c0000\0" \
 	"upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 		"mw.b 10200000 0x00 ${uboot_sz};" \
 		"run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 		"sf write ${loadaddr} 400 ${filesize};" \
 		"sf read 10200000 400 ${uboot_sz};" \
 		"cmp.b ${loadaddr} 10200000 bc000\0" \
 	"ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
 	"load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
 	"load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
 	"ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
 		"run net_args addmtd addmisc;run fdt_setup;" \
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
 	"rootfsname=rootfs\0" \
 	"ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
 		"ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
 		"${hostname}:${netdev}:off\0" \
 	"ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
 		"run bootargs_defaults ubi_args addmtd addmisc;" \
 		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
 	"ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
 	"upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
 		"ubi write ${loadaddr} rootfs ${filesize}\0" \
 	"ksz=800000\0" \
 	"rootsz=2000000\0" \
 	"usersz=8000000\0" \
 	"ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
 		"ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"

 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"run mmcboot;" \
 	"else run ubi_ubi; fi"

 #define CONFIG_ARP_TIMEOUT		200UL

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256

 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE		(128 * 1024)

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* FLASH and environment organization */
 #define CONFIG_SYS_NO_FLASH

 #define CONFIG_ENV_SIZE			(12 * 1024)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SECT_SIZE		(0x010000)
 #define CONFIG_ENV_OFFSET		(0x0c0000)
 #define CONFIG_ENV_OFFSET_REDUND	(0x0d0000)

 #define CONFIG_OF_LIBFDT

 #define CONFIG_CMD_CACHE

 #define CONFIG_SYS_FSL_USDHC_NUM	2

 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

 #define CONFIG_CMD_GPIO
 #define CONFIG_GPIO_ENABLE_SPI_FLASH	IMX_GPIO_NR(2, 15)

 /* NAND stuff */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION

 /* DMA stuff, needed for GPMI/MXS NAND support */
 #define CONFIG_APBH_DMA
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8

 /* RTC */
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #define CONFIG_SYS_RTC_BUS_NUM	2
 #define CONFIG_RTC_M41T11
 #define CONFIG_CMD_DATE

 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_FAT
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0

 #define ARISTAINETOS_USB_OTG_PWR	IMX_GPIO_NR(4, 15)
 #define ARISTAINETOS_USB_H1_PWR		IMX_GPIO_NR(3, 31)

 /* UBI support */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS

 #define MTDIDS_DEFAULT                  "nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT                "mtdparts=gpmi-nand:-(ubi)"

 #define CONFIG_MTD_UBI_FASTMAP
 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT	1

 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG

 #define CONFIG_FIT

 /* Framebuffer */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 /* check this console not needed, after test remove it */
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 198000000
 #define CONFIG_IMX_VIDEO_SKIP

 #define CONFIG_CMD_BMP

 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000

 #endif                         /* __ARISTAINETOS_CONFIG_H */
	/*
	* (C) Copyright 2014
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Based on:
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/
	#ifndef __ARISTAINETOS_CONFIG_H
	#define __ARISTAINETOS_CONFIG_H

	#define CONFIG_MX6

	#include "mx6_common.h"
	#include <linux/sizes.h>

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#include <asm/arch/imx-regs.h>
	#include <asm/imx-common/gpio.h>

	#define CONFIG_MACH_TYPE 4501
	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
	#define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb"
	#define CONFIG_HOSTNAME aristainetos
	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)

	#define CONFIG_SYS_GENERIC_BOARD

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_MXC_GPIO

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART5_BASE
	#define CONFIG_CONSOLE_DEV "ttymxc4"

	#define CONFIG_CMD_FUSE
	#define CONFIG_MXC_OCOTP

	/* MMC Configs */
	#define CONFIG_FSL_ESDHC
	#define CONFIG_FSL_USDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0

	#define CONFIG_MMC
	#define CONFIG_CMD_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_BOUNCE_BUFFER
	#define CONFIG_CMD_EXT2
	#define CONFIG_CMD_FAT
	#define CONFIG_DOS_PARTITION

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NET
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 0

	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL

	#define CONFIG_CMD_SF
	#define CONFIG_SPI_FLASH
	#define CONFIG_SPI_FLASH_MTD
	#define CONFIG_SPI_FLASH_STMICRO
	#define CONFIG_MXC_SPI
	#define CONFIG_SF_DEFAULT_BUS 3
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 20000000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/* Command definition */
	#include <config_cmd_default.h>

	#define CONFIG_CMD_BMODE
	#define CONFIG_CMD_BOOTZ
	#define CONFIG_CMD_SETEXPR
	#undef CONFIG_CMD_IMLS

	#define CONFIG_BOOTDELAY 3

	#define CONFIG_LOADADDR 0x12000000
	#define CONFIG_SYS_TEXT_BASE 0x17800000

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"uimage=uImage\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr_r=0x11000000\0" \
	"kernel_addr_r=0x12000000\0" \
	"kernel_file=uImage\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"mmcpart=1\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
	"${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
	"${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs;run loadimage loadfdt fdt_setup;" \
	"bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
	"nfsopts=nfsvers=3 nolock rw\0" \
	"netdev=eth0\0" \
	"fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
	"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
	"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"get_env=mw ${loadaddr} 0x00000000 0x20000;" \
	"tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
	"env import -t ${loadaddr}\0" \
	"addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
	"bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
	"${optargs}\0" \
	"net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
	"root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	"${hostname}:${netdev}:off\0" \
	"net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
	"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	"uboot=/tftpboot/aristainetos/u-boot.imx\0" \
	"load_uboot=tftp ${loadaddr} ${uboot}\0" \
	"uboot_sz=c0000\0" \
	"upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	"mw.b 10200000 0x00 ${uboot_sz};" \
	"run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
	"sf write ${loadaddr} 400 ${filesize};" \
	"sf read 10200000 400 ${uboot_sz};" \
	"cmp.b ${loadaddr} 10200000 bc000\0" \
	"ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
	"load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
	"load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
	"ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
	"run net_args addmtd addmisc;run fdt_setup;" \
	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	"rootfsname=rootfs\0" \
	"ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
	"ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
	"${hostname}:${netdev}:off\0" \
	"ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
	"run bootargs_defaults ubi_args addmtd addmisc;" \
	"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
	"ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
	"upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
	"ubi write ${loadaddr} rootfs ${filesize}\0" \
	"ksz=800000\0" \
	"rootsz=2000000\0" \
	"usersz=8000000\0" \
	"ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
	"ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"

	#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
	"run mmcboot;" \
	"else run ubi_ubi; fi"

	#define CONFIG_ARP_TIMEOUT 200UL

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	#define CONFIG_AUTO_COMPLETE
	#define CONFIG_SYS_CBSIZE 256

	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_STACKSIZE (128 * 1024)

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* FLASH and environment organization */
	#define CONFIG_SYS_NO_FLASH

	#define CONFIG_ENV_SIZE (12 * 1024)
	#define CONFIG_ENV_IS_IN_SPI_FLASH
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SECT_SIZE (0x010000)
	#define CONFIG_ENV_OFFSET (0x0c0000)
	#define CONFIG_ENV_OFFSET_REDUND (0x0d0000)

	#define CONFIG_OF_LIBFDT

	#define CONFIG_CMD_CACHE

	#define CONFIG_SYS_FSL_USDHC_NUM 2

	#define CONFIG_CMD_I2C
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 0x7f
	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }

	#define CONFIG_CMD_GPIO
	#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)

	/* NAND stuff */
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NAND_TRIMFFS
	#define CONFIG_NAND_MXS
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_ONFI_DETECTION

	/* DMA stuff, needed for GPMI/MXS NAND support */
	#define CONFIG_APBH_DMA
	#define CONFIG_APBH_DMA_BURST
	#define CONFIG_APBH_DMA_BURST8

	/* RTC */
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#define CONFIG_SYS_RTC_BUS_NUM 2
	#define CONFIG_RTC_M41T11
	#define CONFIG_CMD_DATE

	/* USB Configs */
	#define CONFIG_CMD_USB
	#define CONFIG_CMD_FAT
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_STORAGE
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0

	#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
	#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31)

	/* UBI support */
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_MTD_DEVICE
	#define CONFIG_RBTREE
	#define CONFIG_LZO
	#define CONFIG_CMD_UBI
	#define CONFIG_CMD_UBIFS

	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)"

	#define CONFIG_MTD_UBI_FASTMAP
	#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1

	#define CONFIG_HW_WATCHDOG
	#define CONFIG_IMX_WATCHDOG

	#define CONFIG_FIT

	/* Framebuffer */
	#define CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	/* check this console not needed, after test remove it */
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_IPUV3_CLK 198000000
	#define CONFIG_IMX_VIDEO_SKIP

	#define CONFIG_CMD_BMP

	#define CONFIG_PWM_IMX
	#define CONFIG_IMX6_PWM_PER_CLK 66000000

	#endif /* __ARISTAINETOS_CONFIG_H */