| /* |
| * Memory setup for ORIGEN board based on S5PV310 |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <config.h> |
| #include "origen_setup.h" |
| #define SET_MIU |
| |
| .globl mem_ctrl_asm_init |
| mem_ctrl_asm_init: |
| /* |
| * Async bridge configuration at CPU_core: |
| * 1: half_sync |
| * 0: full_sync |
| */ |
| ldr r0, =ASYNC_CONFIG |
| mov r1, #1 |
| str r1, [r0] |
| |
| #ifdef SET_MIU |
| ldr r0, =S5PC210_MIU_BASE |
| /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ |
| ldr r1, =0x20001507 |
| str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] |
| |
| /* Update MIU Configuration */ |
| ldr r1, =0x00000001 |
| str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] |
| #endif |
| /* DREX0 */ |
| ldr r0, =S5PC210_DMC0_BASE |
| |
| /* |
| * DLL Parameter Setting: |
| * Termination: Enable R/W |
| * Phase Delay for DQS Cleaning: 180' Shift |
| */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* |
| * ZQ Calibration |
| * Termination: Disable |
| * Auto Calibration Start: Enable |
| */ |
| ldr r1, =0xE3855703 |
| str r1, [r0, #DMC_PHYZQCONTROL] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 1: subs r2, r2, #1 |
| bne 1b |
| |
| /* |
| * Update DLL Information: |
| * Force DLL Resyncronization |
| */ |
| ldr r1, =0xe000008e |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Reset Force DLL Resyncronization */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Enable Differential DQS, DLL Off*/ |
| ldr r1, =0x71101008 |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| /* Activate PHY DLL: DLL On */ |
| ldr r1, =0x7110100A |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| /* Set DLL Parameters */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* DLL Start */ |
| ldr r1, =0x7110100B |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| ldr r1, =0x00000000 |
| str r1, [r0, #DMC_PHYCONTROL2] |
| |
| /* Set Clock Ratio of Bus clock to Memory Clock */ |
| ldr r1, =0x0FFF301a |
| str r1, [r0, #DMC_CONCONTROL] |
| |
| /* |
| * Memor Burst length: 8 |
| * Number of chips: 2 |
| * Memory Bus width: 32 bit |
| * Memory Type: DDR3 |
| * Additional Latancy for PLL: 1 Cycle |
| */ |
| ldr r1, =0x00312640 |
| str r1, [r0, #DMC_MEMCONTROL] |
| |
| /* |
| * Memory Configuration Chip 0 |
| * Address Mapping: Interleaved |
| * Number of Column address Bits: 10 bits |
| * Number of Rows Address Bits: 14 |
| * Number of Banks: 8 |
| */ |
| ldr r1, =0x20e01323 |
| str r1, [r0, #DMC_MEMCONFIG0] |
| |
| /* |
| * Memory Configuration Chip 1 |
| * Address Mapping: Interleaved |
| * Number of Column address Bits: 10 bits |
| * Number of Rows Address Bits: 14 |
| * Number of Banks: 8 |
| */ |
| ldr r1, =0x40e01323 |
| str r1, [r0, #DMC_MEMCONFIG1] |
| |
| /* Config Precharge Policy */ |
| ldr r1, =0xff000000 |
| str r1, [r0, #DMC_PRECHCONFIG] |
| |
| /* |
| * TimingAref, TimingRow, TimingData, TimingPower Setting: |
| * Values as per Memory AC Parameters |
| */ |
| ldr r1, =0x000000BB |
| str r1, [r0, #DMC_TIMINGAREF] |
| ldr r1, =0x4046654f |
| str r1, [r0, #DMC_TIMINGROW] |
| ldr r1, =0x46400506 |
| str r1, [r0, #DMC_TIMINGDATA] |
| ldr r1, =0x52000A3C |
| str r1, [r0, #DMC_TIMINGPOWER] |
| |
| /* Chip0: NOP Command: Assert and Hold CKE to high level */ |
| ldr r1, =0x07000000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 2: subs r2, r2, #1 |
| bne 2b |
| |
| /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ |
| ldr r1, =0x00020000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00030000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00010002 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00000328 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 3: subs r2, r2, #1 |
| bne 3b |
| |
| /* Chip0: ZQINIT */ |
| ldr r1, =0x0a000000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 4: subs r2, r2, #1 |
| bne 4b |
| |
| /* Chip1: NOP Command: Assert and Hold CKE to high level */ |
| ldr r1, =0x07100000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 5: subs r2, r2, #1 |
| bne 5b |
| |
| /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ |
| ldr r1, =0x00120000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00130000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00110002 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00100328 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 6: subs r2, r2, #1 |
| bne 6b |
| |
| /* Chip1: ZQINIT */ |
| ldr r1, =0x0a100000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 7: subs r2, r2, #1 |
| bne 7b |
| |
| ldr r1, =0xe000008e |
| str r1, [r0, #DMC_PHYCONTROL1] |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 8: subs r2, r2, #1 |
| bne 8b |
| |
| /* DREX1 */ |
| ldr r0, =S5PC210_DMC1_BASE @0x10410000 |
| |
| /* |
| * DLL Parameter Setting: |
| * Termination: Enable R/W |
| * Phase Delay for DQS Cleaning: 180' Shift |
| */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* |
| * ZQ Calibration: |
| * Termination: Disable |
| * Auto Calibration Start: Enable |
| */ |
| ldr r1, =0xE3855703 |
| str r1, [r0, #DMC_PHYZQCONTROL] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 1: subs r2, r2, #1 |
| bne 1b |
| |
| /* |
| * Update DLL Information: |
| * Force DLL Resyncronization |
| */ |
| ldr r1, =0xe000008e |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Reset Force DLL Resyncronization */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Enable Differential DQS, DLL Off*/ |
| ldr r1, =0x71101008 |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| /* Activate PHY DLL: DLL On */ |
| ldr r1, =0x7110100A |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| /* Set DLL Parameters */ |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* DLL Start */ |
| ldr r1, =0x7110100B |
| str r1, [r0, #DMC_PHYCONTROL0] |
| |
| ldr r1, =0x00000000 |
| str r1, [r0, #DMC_PHYCONTROL2] |
| |
| /* Set Clock Ratio of Bus clock to Memory Clock */ |
| ldr r1, =0x0FFF301a |
| str r1, [r0, #DMC_CONCONTROL] |
| |
| /* |
| * Memor Burst length: 8 |
| * Number of chips: 2 |
| * Memory Bus width: 32 bit |
| * Memory Type: DDR3 |
| * Additional Latancy for PLL: 1 Cycle |
| */ |
| ldr r1, =0x00312640 |
| str r1, [r0, #DMC_MEMCONTROL] |
| |
| /* |
| * Memory Configuration Chip 0 |
| * Address Mapping: Interleaved |
| * Number of Column address Bits: 10 bits |
| * Number of Rows Address Bits: 14 |
| * Number of Banks: 8 |
| */ |
| ldr r1, =0x20e01323 |
| str r1, [r0, #DMC_MEMCONFIG0] |
| |
| /* |
| * Memory Configuration Chip 1 |
| * Address Mapping: Interleaved |
| * Number of Column address Bits: 10 bits |
| * Number of Rows Address Bits: 14 |
| * Number of Banks: 8 |
| */ |
| ldr r1, =0x40e01323 |
| str r1, [r0, #DMC_MEMCONFIG1] |
| |
| /* Config Precharge Policy */ |
| ldr r1, =0xff000000 |
| str r1, [r0, #DMC_PRECHCONFIG] |
| |
| /* |
| * TimingAref, TimingRow, TimingData, TimingPower Setting: |
| * Values as per Memory AC Parameters |
| */ |
| ldr r1, =0x000000BB |
| str r1, [r0, #DMC_TIMINGAREF] |
| ldr r1, =0x4046654f |
| str r1, [r0, #DMC_TIMINGROW] |
| ldr r1, =0x46400506 |
| str r1, [r0, #DMC_TIMINGDATA] |
| ldr r1, =0x52000A3C |
| str r1, [r0, #DMC_TIMINGPOWER] |
| |
| /* Chip0: NOP Command: Assert and Hold CKE to high level */ |
| ldr r1, =0x07000000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 2: subs r2, r2, #1 |
| bne 2b |
| |
| /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ |
| ldr r1, =0x00020000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00030000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00010002 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00000328 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 3: subs r2, r2, #1 |
| bne 3b |
| |
| /* Chip 0: ZQINIT */ |
| ldr r1, =0x0a000000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 4: subs r2, r2, #1 |
| bne 4b |
| |
| /* Chip1: NOP Command: Assert and Hold CKE to high level */ |
| ldr r1, =0x07100000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 5: subs r2, r2, #1 |
| bne 5b |
| |
| /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ |
| ldr r1, =0x00120000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00130000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00110002 |
| str r1, [r0, #DMC_DIRECTCMD] |
| ldr r1, =0x00100328 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 6: subs r2, r2, #1 |
| bne 6b |
| |
| /* Chip1: ZQINIT */ |
| ldr r1, =0x0a100000 |
| str r1, [r0, #DMC_DIRECTCMD] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 7: subs r2, r2, #1 |
| bne 7b |
| |
| ldr r1, =0xe000008e |
| str r1, [r0, #DMC_PHYCONTROL1] |
| ldr r1, =0xe0000086 |
| str r1, [r0, #DMC_PHYCONTROL1] |
| |
| /* Wait ?us*/ |
| mov r2, #0x100000 |
| 8: subs r2, r2, #1 |
| bne 8b |
| |
| /* turn on DREX0, DREX1 */ |
| ldr r0, =S5PC210_DMC0_BASE |
| ldr r1, =0x0FFF303a |
| str r1, [r0, #DMC_CONCONTROL] |
| |
| ldr r0, =S5PC210_DMC1_BASE |
| ldr r1, =0x0FFF303a |
| str r1, [r0, #DMC_CONCONTROL] |
| |
| mov pc, lr |