blob: 37b121c3dcc17cc42b72b4b1206edc34e2832452 [file] [log] [blame]
/*----------------------------------------------------------------------------+
|
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
|
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
|
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
|
| COPYRIGHT I B M CORPORATION 1999
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+----------------------------------------------------------------------------*/
#ifndef __PPC405_H__
#define __PPC405_H__
#ifndef CONFIG_IOP480
#define CFG_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
#else
#define CFG_DCACHE_SIZE (2 << 10) /* For PLX IOP480 (403) */
#endif
/*--------------------------------------------------------------------- */
/* Special Purpose Registers */
/*--------------------------------------------------------------------- */
#define srr2 0x3de /* save/restore register 2 */
#define srr3 0x3df /* save/restore register 3 */
/*
* 405 does not really have CSRR0/1 but SRR2/3 are used during critical
* exception for the exact same purposes - let's alias them and have a
* common handling in crit_return() and CRIT_EXCEPTION
*/
#define csrr0 srr2
#define csrr1 srr3
#define dbsr 0x3f0 /* debug status register */
#define dbcr0 0x3f2 /* debug control register 0 */
#define dbcr1 0x3bd /* debug control register 1 */
#define iac1 0x3f4 /* instruction address comparator 1 */
#define iac2 0x3f5 /* instruction address comparator 2 */
#define iac3 0x3b4 /* instruction address comparator 3 */
#define iac4 0x3b5 /* instruction address comparator 4 */
#define dac1 0x3f6 /* data address comparator 1 */
#define dac2 0x3f7 /* data address comparator 2 */
#define dccr 0x3fa /* data cache control register */
#define iccr 0x3fb /* instruction cache control register */
#define esr 0x3d4 /* execption syndrome register */
#define dear 0x3d5 /* data exeption address register */
#define evpr 0x3d6 /* exeption vector prefix register */
#define tsr 0x3d8 /* timer status register */
#define tcr 0x3da /* timer control register */
#define pit 0x3db /* programmable interval timer */
#define sgr 0x3b9 /* storage guarded reg */
#define dcwr 0x3ba /* data cache write-thru reg*/
#define sler 0x3bb /* storage little-endian reg */
#define cdbcr 0x3d7 /* cache debug cntrl reg */
#define icdbdr 0x3d3 /* instr cache dbug data reg*/
#define ccr0 0x3b3 /* core configuration register */
#define dvc1 0x3b6 /* data value compare register 1 */
#define dvc2 0x3b7 /* data value compare register 2 */
#define pid 0x3b1 /* process ID */
#define su0r 0x3bc /* storage user-defined register 0 */
#define zpr 0x3b0 /* zone protection regsiter */
#define tbl 0x11c /* time base lower - privileged write */
#define tbu 0x11d /* time base upper - privileged write */
#define sprg4r 0x104 /* Special purpose general 4 - read only */
#define sprg5r 0x105 /* Special purpose general 5 - read only */
#define sprg6r 0x106 /* Special purpose general 6 - read only */
#define sprg7r 0x107 /* Special purpose general 7 - read only */
#define sprg4w 0x114 /* Special purpose general 4 - write only */
#define sprg5w 0x115 /* Special purpose general 5 - write only */
#define sprg6w 0x116 /* Special purpose general 6 - write only */
#define sprg7w 0x117 /* Special purpose general 7 - write only */
/******************************************************************************
* Special for PPC405GP
******************************************************************************/
/******************************************************************************
* DMA
******************************************************************************/
#define DMA_DCR_BASE 0x100
#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
/******************************************************************************
* Universal interrupt controller
******************************************************************************/
#define UIC_SR 0x0 /* UIC status */
#define UIC_ER 0x2 /* UIC enable */
#define UIC_CR 0x3 /* UIC critical */
#define UIC_PR 0x4 /* UIC polarity */
#define UIC_TR 0x5 /* UIC triggering */
#define UIC_MSR 0x6 /* UIC masked status */
#define UIC_VR 0x7 /* UIC vector */
#define UIC_VCR 0x8 /* UIC vector configuration */
#define UIC_DCR_BASE 0xc0
#define UIC0_DCR_BASE UIC_DCR_BASE
#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
#if defined(CONFIG_405EX)
#define uic0sr uicsr /* UIC status */
#define uic0srs uicsrs /* UIC status set */
#define uic0er uicer /* UIC enable */
#define uic0cr uiccr /* UIC critical */
#define uic0pr uicpr /* UIC polarity */
#define uic0tr uictr /* UIC triggering */
#define uic0msr uicmsr /* UIC masked status */
#define uic0vr uicvr /* UIC vector */
#define uic0vcr uicvcr /* UIC vector configuration*/
#define UIC_DCR_BASE1 0xd0
#define UIC1_DCR_BASE 0xd0
#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */
#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */
#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */
#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */
#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */
#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */
#define uic1msr (UIC_DCR_BASE1+0x6) /* UIC masked status */
#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */
#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/
#define UIC_DCR_BASE2 0xe0
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */
#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */
#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */
#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */
#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */
#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */
#define uic2msr (UIC_DCR_BASE2+0x6) /* UIC masked status */
#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */
#define uic2vcr (UIC_DCR_BASE2+0x8) /* UIC vector configuration*/
#endif
/*-----------------------------------------------------------------------------+
| Universal interrupt controller interrupts
+-----------------------------------------------------------------------------*/
#if defined(CONFIG_405EZ)
#define UIC_DMA0 0x80000000 /* DMA chan. 0 */
#define UIC_DMA1 0x40000000 /* DMA chan. 1 */
#define UIC_DMA2 0x20000000 /* DMA chan. 2 */
#define UIC_DMA3 0x10000000 /* DMA chan. 3 */
#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */
#define UIC_UART0 0x04000000 /* UART 0 */
#define UIC_UART1 0x02000000 /* UART 1 */
#define UIC_CAN0 0x01000000 /* CAN 0 */
#define UIC_CAN1 0x00800000 /* CAN 1 */
#define UIC_SPI 0x00400000 /* SPI */
#define UIC_IIC 0x00200000 /* IIC */
#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */
#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */
#define UIC_USBH1 0x00040000 /* USB Host 1 */
#define UIC_USBH2 0x00020000 /* USB Host 2 */
#define UIC_USBDEV 0x00010000 /* USB Device */
#define UIC_ENET 0x00008000 /* Ethernet interrupt status */
#define UIC_ENET1 0x00008000 /* dummy define */
#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */
#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */
#define UIC_MAL_SERR 0x00002000 /* MAL SERR */
#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */
#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */
#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */
#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */
#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */
#define UIC_NAND 0x00000200 /* NAND Flash controller */
#define UIC_ADC 0x00000100 /* ADC */
#define UIC_DAC 0x00000080 /* DAC */
#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */
#define UIC_RESERVED0 0x00000020 /* Reserved */
#define UIC_EXT0 0x00000010 /* External interrupt 0 */
#define UIC_EXT1 0x00000008 /* External interrupt 1 */
#define UIC_EXT2 0x00000004 /* External interrupt 2 */
#define UIC_EXT3 0x00000002 /* External interrupt 3 */
#define UIC_EXT4 0x00000001 /* External interrupt 4 */
#elif defined(CONFIG_405EX)
/* UIC 0 */
#define UIC_U0 0x80000000 /* */
#define UIC_U1 0x40000000 /* */
#define UIC_IIC0 0x20000000 /* */
#define UIC_PKA 0x10000000 /* */
#define UIC_TRNG 0x08000000 /* */
#define UIC_EBM 0x04000000 /* */
#define UIC_BGI 0x02000000 /* */
#define UIC_IIC1 0x01000000 /* */
#define UIC_SPI 0x00800000 /* */
#define UIC_EIRQ0 0x00400000 /**/
#define UIC_MTE 0x00200000 /*MAL Tx EOB */
#define UIC_MRE 0x00100000 /*MAL Rx EOB */
#define UIC_DMA0 0x00080000 /* */
#define UIC_DMA1 0x00040000 /* */
#define UIC_DMA2 0x00020000 /* */
#define UIC_DMA3 0x00010000 /* */
#define UIC_PCIE0AL 0x00008000 /* */
#define UIC_PCIE0VPD 0x00004000 /* */
#define UIC_RPCIE0HRST 0x00002000 /* */
#define UIC_FPCIE0HRST 0x00001000 /* */
#define UIC_PCIE0TCR 0x00000800 /* */
#define UIC_PCIEMSI0 0x00000400 /* */
#define UIC_PCIEMSI1 0x00000200 /* */
#define UIC_SECURITY 0x00000100 /* */
#define UIC_ENET 0x00000080 /* */
#define UIC_ENET1 0x00000040 /* */
#define UIC_PCIEMSI2 0x00000020 /* */
#define UIC_EIRQ4 0x00000010 /**/
#define UICB0_UIC2NCI 0x00000008 /* */
#define UICB0_UIC2CI 0x00000004 /* */
#define UICB0_UIC1NCI 0x00000002 /* */
#define UICB0_UIC1CI 0x00000001 /* */
#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
UICB0_UIC1CI | UICB0_UIC2NCI)
#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */
#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */
/* UIC 1 */
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
#define UIC_MRDE 0x20000000 /* MAL RXDE */
#define UIC_PCIE0BMVC0 0x10000000 /* */
#define UIC_PCIE0DCRERR 0x08000000 /* */
#define UIC_EBC 0x04000000 /* */
#define UIC_NDFC 0x02000000 /* */
#define UIC_PCEI1DCRERR 0x01000000 /* */
#define UIC_GPTCMPT8 0x00800000 /* */
#define UIC_GPTCMPT9 0x00400000 /* */
#define UIC_PCIE1AL 0x00200000 /* */
#define UIC_PCIE1VPD 0x00100000 /* */
#define UIC_RPCE1HRST 0x00080000 /* */
#define UIC_FPCE1HRST 0x00040000 /* */
#define UIC_PCIE1TCR 0x00020000 /* */
#define UIC_PCIE1VC0 0x00010000 /* */
#define UIC_GPTCMPT3 0x00008000 /* */
#define UIC_GPTCMPT4 0x00004000 /* */
#define UIC_EIRQ7 0x00002000 /* */
#define UIC_EIRQ8 0x00001000 /* */
#define UIC_EIRQ9 0x00000800 /* */
#define UIC_GPTCMP5 0x00000400 /* */
#define UIC_GPTCMP6 0x00000200 /* */
#define UIC_GPTCMP7 0x00000100 /* */
#define UIC_SROM 0x00000080 /* SERIAL ROM*/
#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/
#define UIC_EIRQ2 0x00000020 /* */
#define UIC_EIRQ5 0x00000010 /* */
#define UIC_EIRQ6 0x00000008 /* */
#define UIC_EMAC0WAKE 0x00000004 /* */
#define UIC_EIRQ1 0x00000002 /* */
#define UIC_EMAC1WAKE 0x00000001 /* */
#define UIC_MAL_SERR UIC_MS /* MAL SERR */
#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */
#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */
/* UIC 2 */
#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/
#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/
#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/
#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/
#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/
#define UIC_DDRMCUE 0x04000000 /* */
#define UIC_DDRMCCE 0x02000000 /* */
#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/
#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/
#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/
#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/
#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/
#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/
#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/
#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/
#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/
#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/
#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/
#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/
#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/
#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/
#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/
#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/
#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/
#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/
#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/
#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/
#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/
#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/
#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/
#define UIC_USBWAKE 0x00000002 /* USB wakup*/
#define UIC_USBOTG 0x00000001 /* USB OTG*/
#define UIC_ETH0 UIC_ENET
#define UIC_ETH1 UIC_ENET1
#else /* !defined(CONFIG_405EZ) */
#define UIC_UART0 0x80000000 /* UART 0 */
#define UIC_UART1 0x40000000 /* UART 1 */
#define UIC_IIC 0x20000000 /* IIC */
#define UIC_EXT_MAST 0x10000000 /* External Master */
#define UIC_PCI 0x08000000 /* PCI write to command reg */
#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
#define UIC_ENET 0x00010000 /* Ethernet0 */
#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */
#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */
#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
#define UIC_EXT0 0x00000040 /* External interrupt 0 */
#define UIC_EXT1 0x00000020 /* External interrupt 1 */
#define UIC_EXT2 0x00000010 /* External interrupt 2 */
#define UIC_EXT3 0x00000008 /* External interrupt 3 */
#define UIC_EXT4 0x00000004 /* External interrupt 4 */
#define UIC_EXT5 0x00000002 /* External interrupt 5 */
#define UIC_EXT6 0x00000001 /* External interrupt 6 */
#endif /* defined(CONFIG_405EZ) */
/******************************************************************************
* SDRAM Controller
******************************************************************************/
/* values for memcfga register - indirect addressing of these regs */
#ifndef CONFIG_405EP
#define mem_besra 0x00 /* bus error syndrome reg a */
#define mem_besrsa 0x04 /* bus error syndrome reg set a */
#define mem_besrb 0x08 /* bus error syndrome reg b */
#define mem_besrsb 0x0c /* bus error syndrome reg set b */
#define mem_bear 0x10 /* bus error address reg */
#endif
#define mem_mcopt1 0x20 /* memory controller options 1 */
#define mem_status 0x24 /* memory status */
#define mem_rtr 0x30 /* refresh timer reg */
#define mem_pmit 0x34 /* power management idle timer */
#define mem_mb0cf 0x40 /* memory bank 0 configuration */
#define mem_mb1cf 0x44 /* memory bank 1 configuration */
#ifndef CONFIG_405EP
#define mem_mb2cf 0x48 /* memory bank 2 configuration */
#define mem_mb3cf 0x4c /* memory bank 3 configuration */
#endif
#define mem_sdtr1 0x80 /* timing reg 1 */
#ifndef CONFIG_405EP
#define mem_ecccf 0x94 /* ECC configuration */
#define mem_eccerr 0x98 /* ECC error status */
#endif
#ifndef CONFIG_405EP
/******************************************************************************
* Decompression Controller
******************************************************************************/
#define DECOMP_DCR_BASE 0x14
#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
/* values for kiar register - indirect addressing of these regs */
#define kitor0 0x00 /* index table origin register 0 */
#define kitor1 0x01 /* index table origin register 1 */
#define kitor2 0x02 /* index table origin register 2 */
#define kitor3 0x03 /* index table origin register 3 */
#define kaddr0 0x04 /* address decode definition regsiter 0 */
#define kaddr1 0x05 /* address decode definition regsiter 1 */
#define kconf 0x40 /* decompression core config register */
#define kid 0x41 /* decompression core ID register */
#define kver 0x42 /* decompression core version # reg */
#define kpear 0x50 /* bus error addr reg (PLB addr) */
#define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/
#define kesr0 0x52 /* bus error status reg 0 (R/clear) */
#define kesr0s 0x53 /* bus error status reg 0 (set) */
/* There are 0x400 of the following registers, from krom0 to krom3ff*/
/* Only the first one is given here. */
#define krom0 0x400 /* SRAM/ROM read/write */
#endif
/******************************************************************************
* Power Management
******************************************************************************/
#ifdef CONFIG_405EX
#define POWERMAN_DCR_BASE 0xb0
#else
#define POWERMAN_DCR_BASE 0xb8
#endif
#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
/******************************************************************************
* Extrnal Bus Controller
******************************************************************************/
/* values for ebccfga register - indirect addressing of these regs */
#define pb0cr 0x00 /* periph bank 0 config reg */
#define pb1cr 0x01 /* periph bank 1 config reg */
#define pb2cr 0x02 /* periph bank 2 config reg */
#define pb3cr 0x03 /* periph bank 3 config reg */
#define pb4cr 0x04 /* periph bank 4 config reg */
#ifndef CONFIG_405EP
#define pb5cr 0x05 /* periph bank 5 config reg */
#define pb6cr 0x06 /* periph bank 6 config reg */
#define pb7cr 0x07 /* periph bank 7 config reg */
#endif
#define pb0ap 0x10 /* periph bank 0 access parameters */
#define pb1ap 0x11 /* periph bank 1 access parameters */
#define pb2ap 0x12 /* periph bank 2 access parameters */
#define pb3ap 0x13 /* periph bank 3 access parameters */
#define pb4ap 0x14 /* periph bank 4 access parameters */
#ifndef CONFIG_405EP
#define pb5ap 0x15 /* periph bank 5 access parameters */
#define pb6ap 0x16 /* periph bank 6 access parameters */
#define pb7ap 0x17 /* periph bank 7 access parameters */
#endif
#define pbear 0x20 /* periph bus error addr reg */
#define pbesr0 0x21 /* periph bus error status reg 0 */
#define pbesr1 0x22 /* periph bus error status reg 1 */
#define epcr 0x23 /* external periph control reg */
#define EBC0_CFG 0x23 /* external bus configuration reg */
#ifdef CONFIG_405EP
/******************************************************************************
* Control
******************************************************************************/
#define CNTRL_DCR_BASE 0x0f0
#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */
#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */
#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */
#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */
#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */
#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/
#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */
#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */
#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */
#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */
#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */
#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */
/* Bit definitions */
#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */
#define PLLMR0_CPU_DIV_BYPASS 0x00000000
#define PLLMR0_CPU_DIV_2 0x00100000
#define PLLMR0_CPU_DIV_3 0x00200000
#define PLLMR0_CPU_DIV_4 0x00300000
#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */
#define PLLMR0_CPU_PLB_DIV_1 0x00000000
#define PLLMR0_CPU_PLB_DIV_2 0x00010000
#define PLLMR0_CPU_PLB_DIV_3 0x00020000
#define PLLMR0_CPU_PLB_DIV_4 0x00030000
#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */
#define PLLMR0_OPB_PLB_DIV_1 0x00000000
#define PLLMR0_OPB_PLB_DIV_2 0x00001000
#define PLLMR0_OPB_PLB_DIV_3 0x00002000
#define PLLMR0_OPB_PLB_DIV_4 0x00003000
#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */
#define PLLMR0_EXB_PLB_DIV_2 0x00000000
#define PLLMR0_EXB_PLB_DIV_3 0x00000100
#define PLLMR0_EXB_PLB_DIV_4 0x00000200
#define PLLMR0_EXB_PLB_DIV_5 0x00000300
#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */
#define PLLMR0_MAL_PLB_DIV_1 0x00000000
#define PLLMR0_MAL_PLB_DIV_2 0x00000010
#define PLLMR0_MAL_PLB_DIV_3 0x00000020
#define PLLMR0_MAL_PLB_DIV_4 0x00000030
#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */
#define PLLMR0_PCI_PLB_DIV_1 0x00000000
#define PLLMR0_PCI_PLB_DIV_2 0x00000001
#define PLLMR0_PCI_PLB_DIV_3 0x00000002
#define PLLMR0_PCI_PLB_DIV_4 0x00000003
#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */
#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */
#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */
#define PLLMR1_FBMUL_DIV_16 0x00000000
#define PLLMR1_FBMUL_DIV_1 0x00100000
#define PLLMR1_FBMUL_DIV_2 0x00200000
#define PLLMR1_FBMUL_DIV_3 0x00300000
#define PLLMR1_FBMUL_DIV_4 0x00400000
#define PLLMR1_FBMUL_DIV_5 0x00500000
#define PLLMR1_FBMUL_DIV_6 0x00600000
#define PLLMR1_FBMUL_DIV_7 0x00700000
#define PLLMR1_FBMUL_DIV_8 0x00800000
#define PLLMR1_FBMUL_DIV_9 0x00900000
#define PLLMR1_FBMUL_DIV_10 0x00A00000
#define PLLMR1_FBMUL_DIV_11 0x00B00000
#define PLLMR1_FBMUL_DIV_12 0x00C00000
#define PLLMR1_FBMUL_DIV_13 0x00D00000
#define PLLMR1_FBMUL_DIV_14 0x00E00000
#define PLLMR1_FBMUL_DIV_15 0x00F00000
#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */
#define PLLMR1_FWDVA_DIV_8 0x00000000
#define PLLMR1_FWDVA_DIV_7 0x00010000
#define PLLMR1_FWDVA_DIV_6 0x00020000
#define PLLMR1_FWDVA_DIV_5 0x00030000
#define PLLMR1_FWDVA_DIV_4 0x00040000
#define PLLMR1_FWDVA_DIV_3 0x00050000
#define PLLMR1_FWDVA_DIV_2 0x00060000
#define PLLMR1_FWDVA_DIV_1 0x00070000
#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */
#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */
/* Defines for CPC0_EPRCSR register */
#define CPC0_EPRCSR_E0NFE 0x80000000
#define CPC0_EPRCSR_E1NFE 0x40000000
#define CPC0_EPRCSR_E1RPP 0x00000080
#define CPC0_EPRCSR_E0RPP 0x00000040
#define CPC0_EPRCSR_E1ERP 0x00000020
#define CPC0_EPRCSR_E0ERP 0x00000010
#define CPC0_EPRCSR_E1PCI 0x00000002
#define CPC0_EPRCSR_E0PCI 0x00000001
/* Defines for CPC0_PCI Register */
#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */
#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */
#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/
/* Defines for CPC0_BOOR Register */
#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */
/* Defines for CPC0_PLLMR1 Register fields */
#define PLL_ACTIVE 0x80000000
#define CPC0_PLLMR1_SSCS 0x80000000
#define PLL_RESET 0x40000000
#define CPC0_PLLMR1_PLLR 0x40000000
/* Feedback multiplier */
#define PLL_FBKDIV 0x00F00000
#define CPC0_PLLMR1_FBDV 0x00F00000
#define PLL_FBKDIV_16 0x00000000
#define PLL_FBKDIV_1 0x00100000
#define PLL_FBKDIV_2 0x00200000
#define PLL_FBKDIV_3 0x00300000
#define PLL_FBKDIV_4 0x00400000
#define PLL_FBKDIV_5 0x00500000
#define PLL_FBKDIV_6 0x00600000
#define PLL_FBKDIV_7 0x00700000
#define PLL_FBKDIV_8 0x00800000
#define PLL_FBKDIV_9 0x00900000
#define PLL_FBKDIV_10 0x00A00000
#define PLL_FBKDIV_11 0x00B00000
#define PLL_FBKDIV_12 0x00C00000
#define PLL_FBKDIV_13 0x00D00000
#define PLL_FBKDIV_14 0x00E00000
#define PLL_FBKDIV_15 0x00F00000
/* Forward A divisor */
#define PLL_FWDDIVA 0x00070000
#define CPC0_PLLMR1_FWDVA 0x00070000
#define PLL_FWDDIVA_8 0x00000000
#define PLL_FWDDIVA_7 0x00010000
#define PLL_FWDDIVA_6 0x00020000
#define PLL_FWDDIVA_5 0x00030000
#define PLL_FWDDIVA_4 0x00040000
#define PLL_FWDDIVA_3 0x00050000
#define PLL_FWDDIVA_2 0x00060000
#define PLL_FWDDIVA_1 0x00070000
/* Forward B divisor */
#define PLL_FWDDIVB 0x00007000
#define CPC0_PLLMR1_FWDVB 0x00007000
#define PLL_FWDDIVB_8 0x00000000
#define PLL_FWDDIVB_7 0x00001000
#define PLL_FWDDIVB_6 0x00002000
#define PLL_FWDDIVB_5 0x00003000
#define PLL_FWDDIVB_4 0x00004000
#define PLL_FWDDIVB_3 0x00005000
#define PLL_FWDDIVB_2 0x00006000
#define PLL_FWDDIVB_1 0x00007000
/* PLL tune bits */
#define PLL_TUNE_MASK 0x000003FF
#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */
#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */
#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */
#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */
#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */
#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */
#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */
/* Defines for CPC0_PLLMR0 Register fields */
/* CPU divisor */
#define PLL_CPUDIV 0x00300000
#define CPC0_PLLMR0_CCDV 0x00300000
#define PLL_CPUDIV_1 0x00000000
#define PLL_CPUDIV_2 0x00100000
#define PLL_CPUDIV_3 0x00200000
#define PLL_CPUDIV_4 0x00300000
/* PLB divisor */
#define PLL_PLBDIV 0x00030000
#define CPC0_PLLMR0_CBDV 0x00030000
#define PLL_PLBDIV_1 0x00000000
#define PLL_PLBDIV_2 0x00010000
#define PLL_PLBDIV_3 0x00020000
#define PLL_PLBDIV_4 0x00030000
/* OPB divisor */
#define PLL_OPBDIV 0x00003000
#define CPC0_PLLMR0_OPDV 0x00003000
#define PLL_OPBDIV_1 0x00000000
#define PLL_OPBDIV_2 0x00001000
#define PLL_OPBDIV_3 0x00002000
#define PLL_OPBDIV_4 0x00003000
/* EBC divisor */
#define PLL_EXTBUSDIV 0x00000300
#define CPC0_PLLMR0_EPDV 0x00000300
#define PLL_EXTBUSDIV_2 0x00000000
#define PLL_EXTBUSDIV_3 0x00000100
#define PLL_EXTBUSDIV_4 0x00000200
#define PLL_EXTBUSDIV_5 0x00000300
/* MAL divisor */
#define PLL_MALDIV 0x00000030
#define CPC0_PLLMR0_MPDV 0x00000030
#define PLL_MALDIV_1 0x00000000
#define PLL_MALDIV_2 0x00000010
#define PLL_MALDIV_3 0x00000020
#define PLL_MALDIV_4 0x00000030
/* PCI divisor */
#define PLL_PCIDIV 0x00000003
#define CPC0_PLLMR0_PPFD 0x00000003
#define PLL_PCIDIV_1 0x00000000
#define PLL_PCIDIV_2 0x00000001
#define PLL_PCIDIV_3 0x00000002
#define PLL_PCIDIV_4 0x00000003
/*
*-------------------------------------------------------------------------------
* PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
* assuming a 33.3MHz input clock to the 405EP.
*-------------------------------------------------------------------------------
*/
#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \
PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_2)
#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_3)
#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
PLL_MALDIV_1 | PLL_PCIDIV_1)
#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
* Maximum and minimum values (in MHz) for correct PLL operation.
*/
#define VCO_MIN 500
#define VCO_MAX 1000
#elif defined(CONFIG_405EZ)
#define sdrnand0 0x4000
#define sdrultra0 0x4040
#define sdrultra1 0x4050
#define sdricintstat 0x4510
#define SDR_NAND0_NDEN 0x80000000
#define SDR_NAND0_NDBTEN 0x40000000
#define SDR_NAND0_NDBADR_MASK 0x30000000
#define SDR_NAND0_NDBPG_MASK 0x0f000000
#define SDR_NAND0_NDAREN 0x00800000
#define SDR_NAND0_NDRBEN 0x00400000
#define SDR_ULTRA0_NDGPIOBP 0x80000000
#define SDR_ULTRA0_CSN_MASK 0x78000000
#define SDR_ULTRA0_CSNSEL0 0x40000000
#define SDR_ULTRA0_CSNSEL1 0x20000000
#define SDR_ULTRA0_CSNSEL2 0x10000000
#define SDR_ULTRA0_CSNSEL3 0x08000000
#define SDR_ULTRA0_EBCRDYEN 0x04000000
#define SDR_ULTRA0_SPISSINEN 0x02000000
#define SDR_ULTRA0_NFSRSTEN 0x01000000
#define SDR_ULTRA1_LEDNENABLE 0x40000000
#define SDR_ICRX_STAT 0x80000000
#define SDR_ICTX0_STAT 0x40000000
#define SDR_ICTX1_STAT 0x20000000
#define SDR_PINSTP 0x40
/******************************************************************************
* Control
******************************************************************************/
/* CPR Registers */
#define cprclkupd 0x020 /* CPR_CLKUPD */
#define cprpllc 0x040 /* CPR_PLLC */
#define cprplld 0x060 /* CPR_PLLD */
#define cprprimad 0x080 /* CPR_PRIMAD */
#define cprperd0 0x0e0 /* CPR_PERD0 */
#define cprperd1 0x0e1 /* CPR_PERD1 */
#define cprperc0 0x180 /* CPR_PERC0 */
#define cprmisc0 0x181 /* CPR_MISC0 */
#define cprmisc1 0x182 /* CPR_MISC1 */
#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */
#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */
#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */
#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */
#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */
#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */
#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */
#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */
#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */
#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */
#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */
#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */
#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */
#else /* #ifdef CONFIG_405EP */
/******************************************************************************
* Control
******************************************************************************/
#define CNTRL_DCR_BASE 0x0b0
#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */
#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */
#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */
/* CPC0_ECR/CPC0_EIRR: PPC405GPr only */
#define CPC0_EIRR (CNTRL_DCR_BASE+0x6) /* external interrupt routing register */
#define CPC0_ECR (0xaa) /* edge conditioner register */
#define ecr (0xaa) /* edge conditioner register (405gpr) */
/* Bit definitions */
#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
#define PLLMR_FWD_DIV_BYPASS 0xE0000000
#define PLLMR_FWD_DIV_3 0xA0000000
#define PLLMR_FWD_DIV_4 0x80000000
#define PLLMR_FWD_DIV_6 0x40000000
#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
#define PLLMR_FB_DIV_1 0x02000000
#define PLLMR_FB_DIV_2 0x04000000
#define PLLMR_FB_DIV_3 0x06000000
#define PLLMR_FB_DIV_4 0x08000000
#define PLLMR_TUNING_MASK 0x01F80000
#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
#define PLLMR_CPU_PLB_DIV_1 0x00000000
#define PLLMR_CPU_PLB_DIV_2 0x00020000
#define PLLMR_CPU_PLB_DIV_3 0x00040000
#define PLLMR_CPU_PLB_DIV_4 0x00060000
#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
#define PLLMR_OPB_PLB_DIV_1 0x00000000
#define PLLMR_OPB_PLB_DIV_2 0x00008000
#define PLLMR_OPB_PLB_DIV_3 0x00010000
#define PLLMR_OPB_PLB_DIV_4 0x00018000
#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
#define PLLMR_PCI_PLB_DIV_1 0x00000000
#define PLLMR_PCI_PLB_DIV_2 0x00002000
#define PLLMR_PCI_PLB_DIV_3 0x00004000
#define PLLMR_PCI_PLB_DIV_4 0x00006000
#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
#define PLLMR_EXB_PLB_DIV_2 0x00000000
#define PLLMR_EXB_PLB_DIV_3 0x00000800
#define PLLMR_EXB_PLB_DIV_4 0x00001000
#define PLLMR_EXB_PLB_DIV_5 0x00001800
/* definitions for PPC405GPr (new mode strapping) */
#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
#define PSR_PLL_FWD_MASK 0xC0000000
#define PSR_PLL_FDBACK_MASK 0x30000000
#define PSR_PLL_TUNING_MASK 0x0E000000
#define PSR_PLB_CPU_MASK 0x01800000
#define PSR_OPB_PLB_MASK 0x00600000
#define PSR_PCI_PLB_MASK 0x00180000
#define PSR_EB_PLB_MASK 0x00060000
#define PSR_ROM_WIDTH_MASK 0x00018000
#define PSR_ROM_LOC 0x00004000
#define PSR_PCI_ASYNC_EN 0x00001000
#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
#define PSR_PCI_ARBIT_EN 0x00000400
#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
#ifndef CONFIG_IOP480
/*
* PLL Voltage Controlled Oscillator (VCO) definitions
* Maximum and minimum values (in MHz) for correct PLL operation.
*/
#define VCO_MIN 400
#define VCO_MAX 800
#endif /* #ifndef CONFIG_IOP480 */
#endif /* #ifdef CONFIG_405EP */
/******************************************************************************
* Memory Access Layer
******************************************************************************/
#if defined(CONFIG_405EZ)
#define MAL_DCR_BASE 0x380
#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/
#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
/* 0x08-0x0F Reserved */
#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
/* 0x14-0x1F Reserved */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */
#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */
#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */
#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */
#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */
#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */
#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */
#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */
#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */
#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */
#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */
#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */
#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */
#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */
#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */
#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */
#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */
#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */
#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */
#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */
#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */
#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */
#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */
#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */
#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */
#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */
#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */
#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */
#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */
#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */
#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */
#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */
#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */
#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */
#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */
#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */
#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */
#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */
#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */
#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */
#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */
#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */
#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */
#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */
#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */
#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */
#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */
#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */
#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */
#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */
#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */
#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */
#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */
#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */
#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */
#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */
#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */
#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */
#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */
#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */
#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */
#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */
#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */
#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */
#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */
#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */
#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */
#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */
#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */
#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */
#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */
#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */
#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */
#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */
#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */
#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */
#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */
#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */
#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */
#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */
#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */
#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */
#else /* !defined(CONFIG_405EZ) */
#define MAL_DCR_BASE 0x180
#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
#endif /* defined(CONFIG_405EZ) */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
#define IICMDBUF 0x00
#define IICSDBUF 0x02
#define IICLMADR 0x04
#define IICHMADR 0x05
#define IICCNTL 0x06
#define IICMDCNTL 0x07
#define IICSTS 0x08
#define IICEXTSTS 0x09
#define IICLSADR 0x0A
#define IICHSADR 0x0B
#define IICCLKDIV 0x0C
#define IICINTRMSK 0x0D
#define IICXFRCNT 0x0E
#define IICXTCNTLSS 0x0F
#define IICDIRECTCNTL 0x10
/*-----------------------------------------------------------------------------
| UART Register Offsets
'----------------------------------------------------------------------------*/
#define DATA_REG 0x00
#define DL_LSB 0x00
#define DL_MSB 0x01
#define INT_ENABLE 0x01
#define FIFO_CONTROL 0x02
#define LINE_CONTROL 0x03
#define MODEM_CONTROL 0x04
#define LINE_STATUS 0x05
#define MODEM_STATUS 0x06
#define SCRATCH 0x07
/******************************************************************************
* On Chip Memory
******************************************************************************/
#if defined(CONFIG_405EZ)
#define OCM_DCR_BASE 0x020
#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */
#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */
#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */
#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */
#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */
#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */
#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */
#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */
#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */
#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */
#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */
#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */
#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/
#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/
#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/
#else
#define OCM_DCR_BASE 0x018
#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
#endif /* CONFIG_405EZ */
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
#if defined(CONFIG_405EZ)
/* Only the 405EZ has 2 GPIOs */
#define GPIO_BASE 0xEF600700
#define GPIO0_OR (GPIO_BASE+0x0)
#define GPIO0_TCR (GPIO_BASE+0x4)
#define GPIO0_OSRL (GPIO_BASE+0x8)
#define GPIO0_OSRH (GPIO_BASE+0xC)
#define GPIO0_TSRL (GPIO_BASE+0x10)
#define GPIO0_TSRH (GPIO_BASE+0x14)
#define GPIO0_ODR (GPIO_BASE+0x18)
#define GPIO0_IR (GPIO_BASE+0x1C)
#define GPIO0_RR1 (GPIO_BASE+0x20)
#define GPIO0_RR2 (GPIO_BASE+0x24)
#define GPIO0_RR3 (GPIO_BASE+0x28)
#define GPIO0_ISR1L (GPIO_BASE+0x30)
#define GPIO0_ISR1H (GPIO_BASE+0x34)
#define GPIO0_ISR2L (GPIO_BASE+0x38)
#define GPIO0_ISR2H (GPIO_BASE+0x3C)
#define GPIO0_ISR3L (GPIO_BASE+0x40)
#define GPIO0_ISR3H (GPIO_BASE+0x44)
#define GPIO1_BASE 0xEF600800
#define GPIO1_OR (GPIO1_BASE+0x0)
#define GPIO1_TCR (GPIO1_BASE+0x4)
#define GPIO1_OSRL (GPIO1_BASE+0x8)
#define GPIO1_OSRH (GPIO1_BASE+0xC)
#define GPIO1_TSRL (GPIO1_BASE+0x10)
#define GPIO1_TSRH (GPIO1_BASE+0x14)
#define GPIO1_ODR (GPIO1_BASE+0x18)
#define GPIO1_IR (GPIO1_BASE+0x1C)
#define GPIO1_RR1 (GPIO1_BASE+0x20)
#define GPIO1_RR2 (GPIO1_BASE+0x24)
#define GPIO1_RR3 (GPIO1_BASE+0x28)
#define GPIO1_ISR1L (GPIO1_BASE+0x30)
#define GPIO1_ISR1H (GPIO1_BASE+0x34)
#define GPIO1_ISR2L (GPIO1_BASE+0x38)
#define GPIO1_ISR2H (GPIO1_BASE+0x3C)
#define GPIO1_ISR3L (GPIO1_BASE+0x40)
#define GPIO1_ISR3H (GPIO1_BASE+0x44)
#elif defined(CONFIG_405EX)
#define GPIO_BASE 0xEF600800
#define GPIO0_OR (GPIO_BASE+0x0)
#define GPIO0_TCR (GPIO_BASE+0x4)
#define GPIO0_OSRL (GPIO_BASE+0x8)
#define GPIO0_OSRH (GPIO_BASE+0xC)
#define GPIO0_TSRL (GPIO_BASE+0x10)
#define GPIO0_TSRH (GPIO_BASE+0x14)
#define GPIO0_ODR (GPIO_BASE+0x18)
#define GPIO0_IR (GPIO_BASE+0x1C)
#define GPIO0_RR1 (GPIO_BASE+0x20)
#define GPIO0_RR2 (GPIO_BASE+0x24)
#define GPIO0_ISR1L (GPIO_BASE+0x30)
#define GPIO0_ISR1H (GPIO_BASE+0x34)
#define GPIO0_ISR2L (GPIO_BASE+0x38)
#define GPIO0_ISR2H (GPIO_BASE+0x3C)
#define GPIO0_ISR3L (GPIO_BASE+0x40)
#define GPIO0_ISR3H (GPIO_BASE+0x44)
#else /* !405EZ */
#define GPIO_BASE 0xEF600700
#define GPIO0_OR (GPIO_BASE+0x0)
#define GPIO0_TCR (GPIO_BASE+0x4)
#define GPIO0_OSRH (GPIO_BASE+0x8)
#define GPIO0_OSRL (GPIO_BASE+0xC)
#define GPIO0_TSRH (GPIO_BASE+0x10)
#define GPIO0_TSRL (GPIO_BASE+0x14)
#define GPIO0_ODR (GPIO_BASE+0x18)
#define GPIO0_IR (GPIO_BASE+0x1C)
#define GPIO0_RR1 (GPIO_BASE+0x20)
#define GPIO0_RR2 (GPIO_BASE+0x24)
#define GPIO0_ISR1H (GPIO_BASE+0x30)
#define GPIO0_ISR1L (GPIO_BASE+0x34)
#define GPIO0_ISR2H (GPIO_BASE+0x38)
#define GPIO0_ISR2L (GPIO_BASE+0x3C)
#endif /* CONFIG_405EZ */
#define GPIO0_BASE GPIO_BASE
#if defined(CONFIG_405EX)
#define SDR0_SRST 0x0200
#define SDRAM_BESR0 0x00
#define SDRAM_BEARL 0x02
#define SDRAM_BEARU 0x03
#define SDRAM_WMIRQ 0x06 /**/
#define SDRAM_PLBOPT 0x08 /**/
#define SDRAM_PUABA 0x09 /**/
#define SDRAM_MCSTAT 0x1F /* memory controller status */
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
#define SDRAM_CODT 0x26 /* on die termination for controller */
#define SDRAM_VVPR 0x27 /* variable VRef programmming */
#define SDRAM_OPARS 0x28 /* on chip driver control setup */
#define SDRAM_OPART 0x29 /* on chip driver control trigger */
#define SDRAM_RTR 0x30 /* refresh timer */
#define SDRAM_PMIT 0x34 /* power management idle timer */
#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
#define SDRAM_MB2CF 0x48 /* memory bank 2 configuration */
#define SDRAM_MB3CF 0x4C /* memory bank 3 configuration */
#define SDRAM_INITPLR0 0x50 /* manual initialization control */
#define SDRAM_INITPLR1 0x51 /* manual initialization control */
#define SDRAM_INITPLR2 0x52 /* manual initialization control */
#define SDRAM_INITPLR3 0x53 /* manual initialization control */
#define SDRAM_INITPLR4 0x54 /* manual initialization control */
#define SDRAM_INITPLR5 0x55 /* manual initialization control */
#define SDRAM_INITPLR6 0x56 /* manual initialization control */
#define SDRAM_INITPLR7 0x57 /* manual initialization control */
#define SDRAM_INITPLR8 0x58 /* manual initialization control */
#define SDRAM_INITPLR9 0x59 /* manual initialization control */
#define SDRAM_INITPLR10 0x5a /* manual initialization control */
#define SDRAM_INITPLR11 0x5b /* manual initialization control */
#define SDRAM_INITPLR12 0x5c /* manual initialization control */
#define SDRAM_INITPLR13 0x5d /* manual initialization control */
#define SDRAM_INITPLR14 0x5e /* manual initialization control */
#define SDRAM_INITPLR15 0x5f /* manual initialization control */
#define SDRAM_RQDC 0x70 /* read DQS delay control */
#define SDRAM_RFDC 0x74 /* read feedback delay control */
#define SDRAM_RDCC 0x78 /* read data capture control */
#define SDRAM_DLCR 0x7A /* delay line calibration */
#define SDRAM_CLKTR 0x80 /* DDR clock timing */
#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
#define SDRAM_MMODE 0x88 /* memory mode */
#define SDRAM_MEMODE 0x89 /* memory extended mode */
#define SDRAM_ECCCR 0x98 /* ECC error status */
#define SDRAM_RID 0xF8 /* revision ID */
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_RXBAS_SDSZ_4 0x00000000 /* 4M */
#define SDRAM_RXBAS_SDSZ_8 0x00001000 /* 8M */
#define SDRAM_RXBAS_SDSZ_16 0x00002000 /* 16M */
#define SDRAM_RXBAS_SDSZ_32 0x00003000 /* 32M */
#define SDRAM_RXBAS_SDSZ_64 0x00004000 /* 64M */
#define SDRAM_RXBAS_SDSZ_128 0x00005000 /* 128M */
#define SDRAM_RXBAS_SDSZ_256 0x00006000 /* 256M */
#define SDRAM_RXBAS_SDSZ_512 0x00007000 /* 512M */
#define SDRAM_RXBAS_SDSZ_1024 0x00008000 /* 1024M */
#define SDRAM_RXBAS_SDSZ_2048 0x00009000 /* 2048M */
#define SDRAM_RXBAS_SDSZ_4096 0x0000a000 /* 4096M */
#define SDRAM_RXBAS_SDSZ_8192 0x0000b000 /* 8192M */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
+-----------------------------------------------------------------------------*/
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask */
#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 2
+-----------------------------------------------------------------------------*/
#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
/*-----------------------------------------------------------------------------+
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RTR_RINT_MASK 0xFFF80000
#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
/*-----------------------------------------------------------------------------+
| SDRAM Read DQS Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RQDC_RQDE_MASK 0x80000000
#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
#define SDRAM_RQDC_RQFD_MASK 0x000001FF
#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_RQDC_RQFD_MAX 0xFF
/*-----------------------------------------------------------------------------+
| SDRAM Read Data Capture Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RDCC_RDSS_MASK 0xC0000000
#define SDRAM_RDCC_RDSS_T1 0x00000000
#define SDRAM_RDCC_RDSS_T2 0x40000000
#define SDRAM_RDCC_RDSS_T3 0x80000000
#define SDRAM_RDCC_RDSS_T4 0xC0000000
#define SDRAM_RDCC_RSAE_MASK 0x00000001
#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Read Feedback Delay Control Register
+-----------------------------------------------------------------------------*/
#define SDRAM_RFDC_ARSE_MASK 0x80000000
#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
#define SDRAM_RFDC_RFFD_MASK 0x000003FF
#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
#define SDRAM_RFDC_RFFD_MAX 0x4FF
/*-----------------------------------------------------------------------------+
| SDRAM Delay Line Calibration Register
+-----------------------------------------------------------------------------*/
#define SDRAM_DLCR_DCLM_MASK 0x80000000
#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
#define SDRAM_DLCR_DCLM_AUTO 0x00000000
#define SDRAM_DLCR_DLCR_MASK 0x08000000
#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
#define SDRAM_DLCR_DLCR_IDLE 0x00000000
#define SDRAM_DLCR_DLCS_MASK 0x07000000
#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
#define SDRAM_DLCR_DLCS_ERROR 0x04000000
#define SDRAM_DLCR_DLCV_MASK 0x000001FF
#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
/*-----------------------------------------------------------------------------+
| SDRAM Controller On Die Termination Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CODT_ODT_ON 0x80000000
#define SDRAM_CODT_ODT_OFF 0x00000000
#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
#define SDRAM_CODT_DQS_MASK 0x00000010
#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
#define SDRAM_CODT_IO_HIZ 0x00000000
#define SDRAM_CODT_IO_NMODE 0x00000001
/*-----------------------------------------------------------------------------+
| SDRAM Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MMODE_WR_MASK 0x00000E00
#define SDRAM_MMODE_WR_DDR1 0x00000000
#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
#define SDRAM_MMODE_DCL_MASK 0x00000070
#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
/*-----------------------------------------------------------------------------+
| SDRAM Extended Mode Register
+-----------------------------------------------------------------------------*/
#define SDRAM_MEMODE_DIC_MASK 0x00000002
#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
#define SDRAM_MEMODE_DIC_WEAK 0x00000002
#define SDRAM_MEMODE_DLL_MASK 0x00000001
#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
#define SDRAM_MEMODE_RTT_MASK 0x00000044
#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
#define SDRAM_MEMODE_RTT_75OHM 0x00000004
#define SDRAM_MEMODE_RTT_150OHM 0x00000040
#define SDRAM_MEMODE_DQS_MASK 0x00000400
#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM Clock Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
+-----------------------------------------------------------------------------*/
#define SDRAM_WRDTR_WDTP_1_CYC 0x80000000
#define SDRAM_WRDTR_LLWP_MASK 0x10000000
#define SDRAM_WRDTR_LLWP_DIS 0x10000000
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR1 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR1_LDOF_MASK 0x80000000
#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
#define SDRAM_SDTR1_RTW_MASK 0x00F00000
#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
#define SDRAM_SDTR1_RTRO_1_CLK 0x00000000
#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
/*-----------------------------------------------------------------------------+
| SDRAM SDTR2 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR2_RCD_MASK 0xF0000000
#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
#define SDRAM_SDTR2_WTR_MASK 0x0F000000
#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
#define SDRAM_SDTR2_WPC_MASK 0x0000F000
#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
#define SDRAM_SDTR2_RPC_MASK 0x00000F00
#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
#define SDRAM_SDTR2_RP_MASK 0x000000F0
#define SDRAM_SDTR2_RP_3_CLK 0x00000030
#define SDRAM_SDTR2_RP_4_CLK 0x00000040
#define SDRAM_SDTR2_RP_5_CLK 0x00000050
#define SDRAM_SDTR2_RP_6_CLK 0x00000060
#define SDRAM_SDTR2_RP_7_CLK 0x00000070
#define SDRAM_SDTR2_RRD_MASK 0x0000000F
#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM SDTR3 Options
+-----------------------------------------------------------------------------*/
#define SDRAM_SDTR3_RAS_MASK 0x1F000000
#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
#define SDRAM_SDTR3_RC_MASK 0x001F0000
#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
#define SDRAM_SDTR3_XCS_MASK 0x00001F00
#define SDRAM_SDTR3_XCS 0x00000D00
#define SDRAM_SDTR3_RFC_MASK 0x0000003F
#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
/*-----------------------------------------------------------------------------+
| Memory Bank 0-1 configuration
+-----------------------------------------------------------------------------*/
#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
/* Defines for CPC0_EPRCSR register */
#define CPC0_EPRCSR_E0NFE 0x80000000
#define CPC0_EPRCSR_E1NFE 0x40000000
#define CPC0_EPRCSR_E1RPP 0x00000080
#define CPC0_EPRCSR_E0RPP 0x00000040
#define CPC0_EPRCSR_E1ERP 0x00000020
#define CPC0_EPRCSR_E0ERP 0x00000010
#define CPC0_EPRCSR_E1PCI 0x00000002
#define CPC0_EPRCSR_E0PCI 0x00000001
#define cpr0_clkupd 0x020
#define cpr0_pllc 0x040
#define cpr0_plld 0x060
#define cpr0_cpud 0x080
#define cpr0_plbd 0x0a0
#define cpr0_opbd 0x0c0
#define cpr0_perd 0x0e0
#define cpr0_ahbd 0x100
#define cpr0_icfg 0x140
#define SDR_PINSTP 0x0040
#define sdr_sdcs 0x0060
#define SDR0_SDCS_SDD (0x80000000 >> 31)
/* CUST0 Customer Configuration Register0 */
#define SDR0_CUST0 0x4000
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
#define SDR0_PFC0 0x4100
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME 0x02000000
#define SDR0_PFC1_U0ME 0x00080000
#define SDR0_PFC1_U0IM 0x00040000
#define SDR0_PFC1_SIS 0x00020000
#define SDR0_PFC1_DMAAEN 0x00010000
#define SDR0_PFC1_DMADEN 0x00008000
#define SDR0_PFC1_USBEN 0x00004000
#define SDR0_PFC1_AHBSWAP 0x00000020
#define SDR0_PFC1_USBBIGEN 0x00000010
#define SDR0_PFC1_GPT_FREQ 0x0000000f
#endif
#endif /* __PPC405_H__ */