blob: 349ca14bbaf869953a0ed546cd3b292ceaea8035 [file] [log] [blame]
/*
* Copyright (C) Matrix Vision GmbH 2008
*
* Matrix Vision mvBlueLYNX-M7 configuration file
* based on Freescale's MPC8349ITX.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define MV_VERSION "v1.0.1"
/*
* High Level Configuration Options
*/
#define CONFIG_E300 1
#define CONFIG_MPC83XX 1
#define CONFIG_MPC834X 1
#define CONFIG_MPC8343 1
#define CFG_IMMR 0xE0000000
#define CONFIG_PCI
#define CONFIG_83XX_GENERIC_PCI
#define CONFIG_PCI_SKIP_HOST_BRIDGE
#define CONFIG_HARD_I2C
#define CONFIG_TSEC_ENET
#define CONFIG_MPC8XXX_SPI
#define CONFIG_HARD_SPI
#define MVBLM7_MMC_CS 0x04000000
/* I2C */
#undef CONFIG_SOFT_I2C
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
#define CFG_I2C_SPEED 100000
#define CFG_I2C_SLAVE 0x7F
/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000
#define CFG_SDRAM_BASE CFG_DDR_BASE
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
#define CFG_83XX_DDR_USES_CS0 1
#define CFG_MEMTEST_START (60<<20)
#define CFG_MEMTEST_END (70<<20)
#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
#define CFG_DDR_SIZE 256
/* HC, 75Ohm, DDR-II, DRQ */
#define CFG_DDRCDR 0x80000001
/* EN, ODT_WR, 3BA, 14row, 10col */
#define CFG_DDR_CS0_CONFIG 0x80014102
#define CFG_DDR_CS1_CONFIG 0x0
#define CFG_DDR_CS2_CONFIG 0x0
#define CFG_DDR_CS3_CONFIG 0x0
#define CFG_DDR_CS0_BNDS 0x0000000f
#define CFG_DDR_CS1_BNDS 0x0
#define CFG_DDR_CS2_BNDS 0x0
#define CFG_DDR_CS3_BNDS 0x0
#define CFG_DDR_CLK_CNTL 0x02000000
#define CFG_DDR_TIMING_0 0x00260802
#define CFG_DDR_TIMING_1 0x2625b221
#define CFG_DDR_TIMING_2 0x1f9820c7
#define CFG_DDR_TIMING_3 0x00000000
/* ~MEM_EN, SREN, DDR-II, 32_BE */
#define CFG_DDR_SDRAM_CFG 0x43080000
#define CFG_DDR_SDRAM_CFG2 0x00401000
#define CFG_DDR_INTERVAL 0x04060100
#define CFG_DDR_MODE 0x078e0232
/* Flash */
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CFG_FLASH_BASE 0xFF800000
#define CFG_FLASH_SIZE 8
#define CFG_FLASH_SIZE_SHIFT 3
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_ERASE_TOUT 60000
#define CFG_FLASH_WRITE_TOUT 500
#define CFG_MAX_FLASH_BANKS 1
#define CFG_MAX_FLASH_SECT 256
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
OR_GPCM_EAD)
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
/*
* U-Boot memory configuration
*/
#define CFG_MONITOR_BASE TEXT_BASE
#undef CFG_RAMBOOT
#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK
#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (512 * 1024)
#define CFG_MALLOC_LEN (512 * 1024)
/*
* Local Bus LCRR and LBCR regs
* LCRR: DLL bypass, Clock divider is 4
* External Local Bus rate is
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
*/
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
#define CFG_LBC_LBCR 0x00000000
/* LB sdram refresh timer, about 6us */
#define CFG_LBC_LSRT 0x32000000
/* LB refresh timer prescal, 266MHz/32*/
#define CFG_LBC_MRTPR 0x20000000
/*
* Serial Port
*/
#define CONFIG_CONS_INDEX 1
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK get_bus_freq(0)
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_CONSOLE ttyS0
#define CONFIG_BAUDRATE 115200
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define MV_DTB_NAME "mvblm7.dtb"
/*
* PCI
*/
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x10000000
#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
#define CFG_PCI1_MMIO_SIZE 0x10000000
#define CFG_PCI1_IO_BASE 0x00000000
#define CFG_PCI1_IO_PHYS 0xE2000000
#define CFG_PCI1_IO_SIZE 0x01000000
#define _IO_BASE 0x00000000
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_RETRY_COUNT 3
#define PCI_66M
#define CONFIG_83XX_CLKIN 66666667
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
/* TSEC */
#define CONFIG_GMII
#define CFG_VSC8601_SKEWFIX
#define CFG_VSC8601_SKEW_TX 3
#define CFG_VSC8601_SKEW_RX 3
#define CONFIG_TSEC1
#define CONFIG_TSEC2
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
#define CONFIG_FEC1_PHY_NORXERR
#define CFG_TSEC1_OFFSET 0x24000
#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
#define TSEC1_PHY_ADDR 0x10
#define TSEC1_PHYIDX 0
#define TSEC1_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
#define CONFIG_FEC2_PHY_NORXERR
#define CFG_TSEC2_OFFSET 0x25000
#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
#define TSEC2_PHY_ADDR 0x11
#define TSEC2_PHYIDX 0
#define TSEC2_FLAGS (TSEC_GIGABIT|TSEC_REDUCED)
#define CONFIG_ETHPRIME "TSEC0"
#define CONFIG_BOOTP_VENDOREX
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_RANDOM_DELAY
#define CONFIG_BOOTP_SEND_HOSTNAME
/* USB */
#define CONFIG_HAS_FSL_DR_USB
/*
* Environment
*/
#undef CFG_FLASH_PROTECTION
#define CONFIG_ENV_OVERWRITE
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR 0xFF800000
#define CFG_ENV_SIZE 0x2000
#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR+CFG_ENV_SIZE)
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
#define CONFIG_LOADS_ECHO
#define CFG_LOADS_BAUD_CHANGE
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_PCI
#define CONFIG_CMD_I2C
#define CONFIG_CMD_FPGA
#undef CONFIG_WATCHDOG
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
/* default load address */
#define CFG_LOAD_ADDR 0x2000000
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 0x200000
#define CFG_PROMPT "mvBL-M7> "
#define CFG_CBSIZE 256
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_MAXARGS 16
#define CFG_BARGSIZE CFG_CBSIZE
#define CFG_HZ 1000
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
#define CFG_HRCW_LOW 0x0
#define CFG_HRCW_HIGH 0x0
/*
* System performance
*/
#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
/* clocking */
#define CFG_SCCR_ENCCM 0
#define CFG_SCCR_USBMPHCM 0
#define CFG_SCCR_USBDRCM 2
#define CFG_SCCR_TSEC1CM 1
#define CFG_SCCR_TSEC2CM 1
#define CFG_SICRH 0x1fff8003
#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
#define CFG_HID0_INIT 0x000000000
#define CFG_HID0_FINAL CFG_HID0_INIT
#define CFG_HID2 HID2_HBE
/* DDR */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* PCI */
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
BATL_GUARDEDSTORAGE)
#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* no PCI2 */
#define CFG_IBAT3L 0
#define CFG_IBAT3U 0
#define CFG_IBAT4L 0
#define CFG_IBAT4U 0
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
BATL_GUARDEDSTORAGE)
#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT7L 0
#define CFG_IBAT7U 0
#define CFG_DBAT0L CFG_IBAT0L
#define CFG_DBAT0U CFG_IBAT0U
#define CFG_DBAT1L CFG_IBAT1L
#define CFG_DBAT1U CFG_IBAT1U
#define CFG_DBAT2L CFG_IBAT2L
#define CFG_DBAT2U CFG_IBAT2U
#define CFG_DBAT3L CFG_IBAT3L
#define CFG_DBAT3U CFG_IBAT3U
#define CFG_DBAT4L CFG_IBAT4L
#define CFG_DBAT4U CFG_IBAT4U
#define CFG_DBAT5L CFG_IBAT5L
#define CFG_DBAT5U CFG_IBAT5U
#define CFG_DBAT6L CFG_IBAT6L
#define CFG_DBAT6U CFG_IBAT6U
#define CFG_DBAT7L CFG_IBAT7L
#define CFG_DBAT7U CFG_IBAT7U
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/*
* Environment Configuration
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_NETDEV eth0
/* Default path and filenames */
#define CONFIG_BOOTDELAY 5
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1000
#define MV_CI "mvBL-M7"
#define MV_VCI "mvBL-M7"
#define MV_FPGA_DATA "0xfff80000"
#define MV_FPGA_SIZE "0x76ca2"
#define MV_KERNEL_ADDR "0xff810000"
#define MV_INITRD_ADDR "0xffc00000"
#define MV_AUTOSCR_ADDR "0xff804000"
#define MV_AUTOSCR_ADDR2 "0xff806000"
#define MV_DTB_ADDR "0xff808000"
#define MV_INITRD_LENGTH "0x00300000"
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define MV_KERNEL_ADDR_RAM "0x00100000"
#define MV_DTB_ADDR_RAM "0x00600000"
#define MV_INITRD_ADDR_RAM "0x01000000"
#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
then autoscr ${autoscr_addr}; \
else autoscr ${autoscr_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"fpga=0\0" \
"fpgadata=" MV_FPGA_DATA "\0" \
"fpgadatasize=" MV_FPGA_SIZE "\0" \
"autoscr_addr=" MV_AUTOSCR_ADDR "\0" \
"autoscr_addr2=" MV_AUTOSCR_ADDR2 "\0" \
"mv_kernel_addr=" MV_KERNEL_ADDR "\0" \
"mv_kernel_addr_ram=" MV_KERNEL_ADDR_RAM "\0" \
"mv_initrd_addr=" MV_INITRD_ADDR "\0" \
"mv_initrd_addr_ram=" MV_INITRD_ADDR_RAM "\0" \
"mv_initrd_length=" MV_INITRD_LENGTH "\0" \
"mv_dtb_addr=" MV_DTB_ADDR "\0" \
"mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0" \
"dtb_name=" MV_DTB_NAME "\0" \
"mv_version=" MV_VERSION "\0" \
"dhcp_client_id=" MV_CI "\0" \
"dhcp_vendor-class-identifier=" MV_VCI "\0" \
"netretry=no\0" \
"use_static_ipaddr=no\0" \
"static_ipaddr=192.168.90.10\0" \
"static_netmask=255.255.255.0\0" \
"static_gateway=0.0.0.0\0" \
"initrd_name=uInitrd.mvblm7-xenorfs\0" \
"zcip=no\0" \
"netboot=yes\0" \
"mvtest=Ff\0" \
"tried_bootfromflash=no\0" \
"tried_bootfromnet=no\0" \
"bootfile=mvblm72625.boot\0" \
"use_dhcp=yes\0" \
"gev_start=yes\0" \
"mvbcdma_debug=0\0" \
"mvbcia_debug=0\0" \
"propdev_debug=0\0" \
"gevss_debug=0\0" \
"watchdog=0\0" \
"usb_dr_mode=host\0" \
""
#define CONFIG_FPGA_COUNT 1
#define CONFIG_FPGA CFG_ALTERA_CYCLON2
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#endif