blob: ce00ba51e476b4e6376136e7a131a195c0a3057f [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Test-related constants for sandbox
*
* Copyright (c) 2014 Google, Inc
*/
#ifndef __ASM_TEST_H
#define __ASM_TEST_H
/* The sandbox driver always permits an I2C device with this address */
#define SANDBOX_I2C_TEST_ADDR 0x59
#define SANDBOX_PCI_VENDOR_ID 0x1234
#define SANDBOX_PCI_DEVICE_ID 0x5678
#define SANDBOX_PCI_CLASS_CODE PCI_CLASS_CODE_COMM
#define SANDBOX_PCI_CLASS_SUB_CODE PCI_CLASS_SUB_CODE_COMM_SERIAL
#define PCI_CAP_ID_PM_OFFSET 0x50
#define PCI_CAP_ID_EXP_OFFSET 0x60
#define PCI_CAP_ID_MSIX_OFFSET 0x70
#define PCI_EXT_CAP_ID_ERR_OFFSET 0x100
#define PCI_EXT_CAP_ID_VC_OFFSET 0x200
#define PCI_EXT_CAP_ID_DSN_OFFSET 0x300
/* Useful for PCI_VDEVICE() macro */
#define PCI_VENDOR_ID_SANDBOX SANDBOX_PCI_VENDOR_ID
#define SWAP_CASE_DRV_DATA 0x55aa
#define SANDBOX_CLK_RATE 32768
/* System controller driver data */
enum {
SYSCON0 = 32,
SYSCON1,
SYSCON_COUNT
};
/**
* sandbox_i2c_set_test_mode() - set test mode for running unit tests
*
* See sandbox_i2c_xfer() for the behaviour changes.
*
* @bus: sandbox I2C bus to adjust
* @test_mode: true to select test mode, false to run normally
*/
void sandbox_i2c_set_test_mode(struct udevice *bus, bool test_mode);
enum sandbox_i2c_eeprom_test_mode {
SIE_TEST_MODE_NONE,
/* Permits read/write of only one byte per I2C transaction */
SIE_TEST_MODE_SINGLE_BYTE,
};
void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
enum sandbox_i2c_eeprom_test_mode mode);
void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
/*
* sandbox_timer_add_offset()
*
* Allow tests to add to the time reported through lib/time.c functions
* offset: number of milliseconds to advance the system time
*/
void sandbox_timer_add_offset(unsigned long offset);
/**
* sandbox_i2c_rtc_set_offset() - set the time offset from system/base time
*
* @dev: RTC device to adjust
* @use_system_time: true to use system time, false to use @base_time
* @offset: RTC offset from current system/base time (-1 for no
* change)
* @return old value of RTC offset
*/
long sandbox_i2c_rtc_set_offset(struct udevice *dev, bool use_system_time,
int offset);
/**
* sandbox_i2c_rtc_get_set_base_time() - get and set the base time
*
* @dev: RTC device to adjust
* @base_time: New base system time (set to -1 for no change)
* @return old base time
*/
long sandbox_i2c_rtc_get_set_base_time(struct udevice *dev, long base_time);
int sandbox_usb_keyb_add_string(struct udevice *dev, const char *str);
/**
* sandbox_osd_get_mem() - get the internal memory of a sandbox OSD
*
* @dev: OSD device for which to access the internal memory for
* @buf: pointer to buffer to receive the OSD memory data
* @buflen: length of buffer in bytes
*/
int sandbox_osd_get_mem(struct udevice *dev, u8 *buf, size_t buflen);
/**
* sandbox_pwm_get_config() - get the PWM config for a channel
*
* @dev: Device to check
* @channel: Channel number to check
* @period_ns: Period of the PWM in nanoseconds
* @duty_ns: Current duty cycle of the PWM in nanoseconds
* @enable: true if the PWM is enabled
* @polarity: true if the PWM polarity is active high
* @return 0 if OK, -ENOSPC if the PWM number is invalid
*/
int sandbox_pwm_get_config(struct udevice *dev, uint channel, uint *period_nsp,
uint *duty_nsp, bool *enablep, bool *polarityp);
/**
* sandbox_sf_set_block_protect() - Set the BP bits of the status register
*
* @dev: Device to update
* @bp_mask: BP bits to set (bits 2:0, so a value of 0 to 7)
*/
void sandbox_sf_set_block_protect(struct udevice *dev, int bp_mask);
/**
* sandbox_get_codec_params() - Read back codec parameters
*
* This reads back the parameters set by audio_codec_set_params() for the
* sandbox audio driver. Arguments are as for that function.
*/
void sandbox_get_codec_params(struct udevice *dev, int *interfacep, int *ratep,
int *mclk_freqp, int *bits_per_samplep,
uint *channelsp);
/**
* sandbox_get_i2s_sum() - Read back the sum of the audio data so far
*
* This data is provided to the sandbox driver by the I2S tx_data() method.
*
* @dev: Device to check
* @return sum of audio data
*/
int sandbox_get_i2s_sum(struct udevice *dev);
/**
* sandbox_get_setup_called() - Returns the number of times setup(*) was called
*
* This is used in the sound test
*
* @dev: Device to check
* @return call count for the setup() method
*/
int sandbox_get_setup_called(struct udevice *dev);
/**
* sandbox_get_sound_sum() - Read back the sum of the sound data so far
*
* This data is provided to the sandbox driver by the sound play() method.
*
* @dev: Device to check
* @return sum of audio data
*/
int sandbox_get_sound_sum(struct udevice *dev);
/**
* sandbox_get_pch_spi_protect() - Get the PCI SPI protection status
*
* @dev: Device to check
* @return 0 if not protected, 1 if protected
*/
int sandbox_get_pch_spi_protect(struct udevice *dev);
#endif