| /* |
| * mux.c |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/mux.h> |
| #include "board.h" |
| |
| static struct module_pin_mux rmii1_pin_mux[] = { |
| {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ |
| {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TD1 */ |
| {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TD0 */ |
| {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RD1 */ |
| {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RD0 */ |
| {OFFSET(mii1_rxdv), MODE(1) | RXACTIVE}, /* RMII1_RXDV */ |
| {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS_DV */ |
| {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ |
| {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_refclk */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux rgmii1_pin_mux[] = { |
| {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ |
| {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ |
| {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ |
| {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ |
| {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ |
| {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ |
| {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ |
| {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ |
| {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ |
| {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ |
| {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ |
| {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux mdio_pin_mux[] = { |
| {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ |
| {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux mmc0_pin_mux[] = { |
| {OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* MMC0_CLK */ |
| {OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_CMD */ |
| {OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT0 */ |
| {OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT1 */ |
| {OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT2 */ |
| {OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT3 */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux i2c0_pin_mux[] = { |
| {OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux gpio5_7_pin_mux[] = { |
| {OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)}, /* GPIO5_7 */ |
| {-1}, |
| }; |
| |
| #ifdef CONFIG_NAND |
| static struct module_pin_mux nand_pin_mux[] = { |
| {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */ |
| {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */ |
| {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */ |
| {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */ |
| {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */ |
| {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */ |
| {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */ |
| {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */ |
| #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT |
| {OFFSET(gpmc_ad8), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8 */ |
| {OFFSET(gpmc_ad9), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9 */ |
| {OFFSET(gpmc_ad10), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */ |
| {OFFSET(gpmc_ad11), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */ |
| {OFFSET(gpmc_ad12), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */ |
| {OFFSET(gpmc_ad13), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */ |
| {OFFSET(gpmc_ad14), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */ |
| {OFFSET(gpmc_ad15), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */ |
| #endif |
| {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* Wait */ |
| {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN)}, /* Write Protect */ |
| {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, /* Chip-Select */ |
| {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, /* Write Enable */ |
| {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, /* Read Enable */ |
| {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, /* Addr Latch Enable*/ |
| {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, /* Byte Enable */ |
| {-1}, |
| }; |
| #endif |
| |
| static __maybe_unused struct module_pin_mux qspi_pin_mux[] = { |
| {OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */ |
| {OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */ |
| {OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */ |
| {OFFSET(gpmc_oen_ren), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D1 */ |
| {OFFSET(gpmc_wen), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D2 */ |
| {OFFSET(gpmc_be0n_cle), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D3 */ |
| {-1}, |
| }; |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |
| |
| void enable_board_pin_mux(void) |
| { |
| configure_module_pin_mux(mmc0_pin_mux); |
| configure_module_pin_mux(i2c0_pin_mux); |
| configure_module_pin_mux(mdio_pin_mux); |
| |
| if (board_is_gpevm()) { |
| configure_module_pin_mux(gpio5_7_pin_mux); |
| configure_module_pin_mux(rgmii1_pin_mux); |
| #if defined(CONFIG_NAND) |
| configure_module_pin_mux(nand_pin_mux); |
| #endif |
| } else if (board_is_sk()) { |
| configure_module_pin_mux(rgmii1_pin_mux); |
| #if defined(CONFIG_NAND) |
| printf("Error: NAND flash not present on this board\n"); |
| #endif |
| configure_module_pin_mux(qspi_pin_mux); |
| } else if (board_is_eposevm()) { |
| configure_module_pin_mux(rmii1_pin_mux); |
| #if defined(CONFIG_NAND) |
| configure_module_pin_mux(nand_pin_mux); |
| #else |
| configure_module_pin_mux(qspi_pin_mux); |
| #endif |
| } |
| } |
| |
| void enable_i2c0_pin_mux(void) |
| { |
| configure_module_pin_mux(i2c0_pin_mux); |
| } |