include/configs/bf561-ezkit.h - github/trini/u-boot - Gitiles

 /*
  * U-boot - Configuration file for BF561 EZKIT board
  */

 #ifndef __CONFIG_EZKIT561_H__
 #define __CONFIG_EZKIT561_H__

 #include <asm/blackfin-config-pre.h>

 #define CFG_LONGHELP		1
 #define CONFIG_CMDLINE_EDITING	1
 #define CONFIG_BAUDRATE		57600
 /* Set default serial console for bf537 */
 #define CONFIG_UART_CONSOLE	0
 #define CONFIG_EZKIT561		1
 #define CONFIG_BOOTDELAY	5

 #define CONFIG_PANIC_HANG 1

 #define CONFIG_BFIN_CPU	bf561-0.3
 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS

 /* This sets the default state of the cache on U-Boot's boot */
 #define CONFIG_ICACHE_ON
 #define CONFIG_DCACHE_ON

 /*
  * Board settings
  */
 #define CONFIG_DRIVER_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x2C010300
 #define CONFIG_ASYNC_EBIU_BASE	CONFIG_SMC91111_BASE & ~(4*1024*1024)
 #define CONFIG_SMC_USE_32_BIT	1
 #define CONFIG_MISC_INIT_R	1

 /*
  * Clock settings
  */

 /* CONFIG_CLKIN_HZ is any value in Hz				*/
 #define CONFIG_CLKIN_HZ		30000000
 /* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
 /*						    1=CLKIN/2	*/
 #define CONFIG_CLKIN_HALF	0
 /* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
 /*						 1=bypass PLL	*/
 #define CONFIG_PLL_BYPASS	0
 /* CONFIG_VCO_MULT controls what the multiplier of the PLL is	*/
 /* Values can range from 1-64					*/
 #define CONFIG_VCO_MULT		20
 /* CONFIG_CCLK_DIV controls what the core clock divider is	*/
 /* Values can be 1, 2, 4, or 8 ONLY				*/
 #define CONFIG_CCLK_DIV		1
 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
 /* Values can range from 1-15					*/
 #define CONFIG_SCLK_DIV		5
 /* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
 /* Values can range from 2-65535				*/
 /* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
 #define CONFIG_SPI_BAUD		2
 #define CONFIG_SPI_BAUD_INITBLOCK	4

 /*
  * Network settings
  */
 #if (CONFIG_DRIVER_SMC91111)
 #define CONFIG_IPADDR		192.168.0.15
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_GATEWAYIP	192.168.0.1
 #define CONFIG_SERVERIP		192.168.0.2
 #define CONFIG_HOSTNAME		ezkit561
 #define CONFIG_ROOTPATH		/arm-cross-build/BF561/uClinux-dist/romfs
 #endif				/* CONFIG_DRIVER_SMC91111 */

 /*
  * Flash settings
  */

 #define CFG_FLASH_CFI		/* The flash is CFI compatible */
 #define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
 #define CFG_FLASH_CFI_AMD_RESET
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_FLASH_BASE		0x20000000
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CFG_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
 #define CFG_ENV_ADDR		0x20020000
 #define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
 /* JFFS Partition offset set  */
 #define CFG_JFFS2_FIRST_BANK	0
 #define CFG_JFFS2_NUM_BANKS	1
 /* 512k reserved for u-boot */
 #define CFG_JFFS2_FIRST_SECTOR	8

 /*
  * SDRAM settings & memory map
  */

 #define CONFIG_MEM_SIZE			64	/* 128, 64, 32, 16 */
 #define CONFIG_MEM_ADD_WDTH		9	/* 8, 9, 10, 11    */
 #define CONFIG_MEM_MT48LC16M16A2TG_75	1

 #define	CFG_SDRAM_BASE		0x00000000
 #define CFG_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)

 #define CFG_MEMTEST_START	0x0	/* memtest works on */
 #define CFG_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */

 #define	CONFIG_LOADADDR		0x01000000	/* default load address */
 #define CFG_LOAD_ADDR		CONFIG_LOADADDR
 #define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
 #define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)

 #define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)

 #define CFG_GBL_DATA_SIZE	0x4000
 #define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
 #define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
 #define CONFIG_STACKSIZE	(128*1024)	/* regular stack */

 #if ( CONFIG_CLKIN_HALF == 0 )
 #define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
 #define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
 #endif

 #if (CONFIG_PLL_BYPASS == 0)
 #define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
 #define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
 #else
 #define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
 #define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
 #endif

 /*
  * Command settings
  */

 #define CFG_AUTOLOAD	"no"	/* rarpb, bootp, dhcp commands will	*/
 				/* only perform a configuration		*/
 				/* lookup from the BOOTP/DHCP server	*/
 				/* but not try to load any image	*/
 				/* using TFTP				*/
 #define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, */
 					/* currently its disabled */
 #define CONFIG_BOOTCOMMAND	"run ramboot"
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"

 #if (CONFIG_DRIVER_SMC91111)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	 \
 	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):"	\
 		"$(rootpath) console=ttyBF0,57600\0"			\
 	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):"	\
 		"$(gatewayip):$(netmask):$(hostname):eth0:off\0"	\
 	"ramboot=tftpboot $(loadaddr) linux; "				\
 		"run ramargs; run addip; bootelf\0"			\
 	"nfsboot=tftpboot $(loadaddr) linux; "				\
 		"run nfsargs; run addip; bootelf\0"			\
 	"update=tftpboot $(loadaddr) u-boot.bin; "			\
 		"protect off 0x20000000 0x2003FFFF; "			\
 		"erase 0x20000000 0x2003FFFF; "				\
 		"cp.b $(loadaddr) 0x20000000 $(filesize)\0"		\
 	""
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	 \
 	"flashboot=bootm 0x20100000\0"					\
 	""
 #endif

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_JFFS2

 #if defined(CONFIG_DRIVER_SMC91111)
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #endif

 /*
  * Console settings
  */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 #define	CFG_PROMPT		"bfin> "	/* Monitor Command Prompt */

 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size */
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size */
 #endif
 #define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define	CFG_MAXARGS		16		/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */

 #define CONFIG_LOADS_ECHO	1

 /*
  * Miscellaneous configurable options
  */
 #define	CFG_HZ			1000		/* decrementer freq: 10 ms ticks */
 #define CFG_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */

 /*
  * FLASH organization and environment definitions
  */
 #define CONFIG_EBIU_SDRRC_VAL  0x306
 #define CONFIG_EBIU_SDGCTL_VAL 0x91114d
 #define CONFIG_EBIU_SDBCTL_VAL 0x15

 #define CONFIG_EBIU_AMGCTL_VAL		0x3F
 #define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
 #define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0

 #include <asm/blackfin-config-post.h>

 #endif				/* __CONFIG_EZKIT561_H__ */
	/*
	* U-boot - Configuration file for BF561 EZKIT board
	*/

	#ifndef __CONFIG_EZKIT561_H__
	#define __CONFIG_EZKIT561_H__

	#include <asm/blackfin-config-pre.h>

	#define CFG_LONGHELP 1
	#define CONFIG_CMDLINE_EDITING 1
	#define CONFIG_BAUDRATE 57600
	/* Set default serial console for bf537 */
	#define CONFIG_UART_CONSOLE 0
	#define CONFIG_EZKIT561 1
	#define CONFIG_BOOTDELAY 5

	#define CONFIG_PANIC_HANG 1

	#define CONFIG_BFIN_CPU bf561-0.3
	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS

	/* This sets the default state of the cache on U-Boot's boot */
	#define CONFIG_ICACHE_ON
	#define CONFIG_DCACHE_ON

	/*
	* Board settings
	*/
	#define CONFIG_DRIVER_SMC91111 1
	#define CONFIG_SMC91111_BASE 0x2C010300
	#define CONFIG_ASYNC_EBIU_BASE CONFIG_SMC91111_BASE & ~(410241024)
	#define CONFIG_SMC_USE_32_BIT 1
	#define CONFIG_MISC_INIT_R 1

	/*
	* Clock settings
	*/

	/* CONFIG_CLKIN_HZ is any value in Hz */
	#define CONFIG_CLKIN_HZ 30000000
	/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */
	/* 1=CLKIN/2 */
	#define CONFIG_CLKIN_HALF 0
	/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
	/* 1=bypass PLL */
	#define CONFIG_PLL_BYPASS 0
	/* CONFIG_VCO_MULT controls what the multiplier of the PLL is */
	/* Values can range from 1-64 */
	#define CONFIG_VCO_MULT 20
	/* CONFIG_CCLK_DIV controls what the core clock divider is */
	/* Values can be 1, 2, 4, or 8 ONLY */
	#define CONFIG_CCLK_DIV 1
	/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
	/* Values can range from 1-15 */
	#define CONFIG_SCLK_DIV 5
	/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */
	/* Values can range from 2-65535 */
	/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */
	#define CONFIG_SPI_BAUD 2
	#define CONFIG_SPI_BAUD_INITBLOCK 4

	/*
	* Network settings
	*/
	#if (CONFIG_DRIVER_SMC91111)
	#define CONFIG_IPADDR 192.168.0.15
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_GATEWAYIP 192.168.0.1
	#define CONFIG_SERVERIP 192.168.0.2
	#define CONFIG_HOSTNAME ezkit561
	#define CONFIG_ROOTPATH /arm-cross-build/BF561/uClinux-dist/romfs
	#endif /* CONFIG_DRIVER_SMC91111 */

	/*
	* Flash settings
	*/

	#define CFG_FLASH_CFI /* The flash is CFI compatible */
	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	#define CFG_FLASH_CFI_AMD_RESET
	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_FLASH_BASE 0x20000000
	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */
	#define CFG_ENV_ADDR 0x20020000
	#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
	/* JFFS Partition offset set */
	#define CFG_JFFS2_FIRST_BANK 0
	#define CFG_JFFS2_NUM_BANKS 1
	/* 512k reserved for u-boot */
	#define CFG_JFFS2_FIRST_SECTOR 8

	/*
	* SDRAM settings & memory map
	*/

	#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */
	#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */
	#define CONFIG_MEM_MT48LC16M16A2TG_75 1

	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)

	#define CFG_MEMTEST_START 0x0 /* memtest works on */
	#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 10241024) / 1 ... 63 MB in DRAM */

	#define CONFIG_LOADADDR 0x01000000 /* default load address */
	#define CFG_LOAD_ADDR CONFIG_LOADADDR
	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)

	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)

	#define CFG_GBL_DATA_SIZE 0x4000
	#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
	#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4)
	#define CONFIG_STACKSIZE (1281024) / regular stack */

	#if ( CONFIG_CLKIN_HALF == 0 )
	#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
	#else
	#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
	#endif

	#if (CONFIG_PLL_BYPASS == 0)
	#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
	#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
	#else
	#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
	#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
	#endif

	/*
	* Command settings
	*/

	#define CFG_AUTOLOAD "no" /* rarpb, bootp, dhcp commands will */
	/* only perform a configuration */
	/* lookup from the BOOTP/DHCP server */
	/* but not try to load any image */
	/* using TFTP */
	#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, */
	/* currently its disabled */
	#define CONFIG_BOOTCOMMAND "run ramboot"
	#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"

	#if (CONFIG_DRIVER_SMC91111)
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
	"$(rootpath) console=ttyBF0,57600\0" \
	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
	"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
	"ramboot=tftpboot $(loadaddr) linux; " \
	"run ramargs; run addip; bootelf\0" \
	"nfsboot=tftpboot $(loadaddr) linux; " \
	"run nfsargs; run addip; bootelf\0" \
	"update=tftpboot $(loadaddr) u-boot.bin; " \
	"protect off 0x20000000 0x2003FFFF; " \
	"erase 0x20000000 0x2003FFFF; " \
	"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
	""
	#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
	"flashboot=bootm 0x20100000\0" \
	""
	#endif

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ELF
	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_JFFS2

	#if defined(CONFIG_DRIVER_SMC91111)
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#endif

	/*
	* Console settings
	*/
	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	#define CFG_PROMPT "bfin> " /* Monitor Command Prompt */

	#if defined(CONFIG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_LOADS_ECHO 1

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */
	#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */

	/*
	* FLASH organization and environment definitions
	*/
	#define CONFIG_EBIU_SDRRC_VAL 0x306
	#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
	#define CONFIG_EBIU_SDBCTL_VAL 0x15

	#define CONFIG_EBIU_AMGCTL_VAL 0x3F
	#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
	#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0

	#include <asm/blackfin-config-post.h>

	#endif /* __CONFIG_EZKIT561_H__ */