| /* |
| * (C) Copyright 2007 Michal Simek |
| * |
| * Michal SIMEK <monstr@monstr.eu> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/microblaze_timer.h> |
| #include <asm/microblaze_intc.h> |
| |
| volatile int timestamp = 0; |
| microblaze_timer_t *tmr; |
| |
| ulong get_timer (ulong base) |
| { |
| if (tmr) |
| return timestamp - base; |
| return timestamp++ - base; |
| } |
| |
| void __udelay(unsigned long usec) |
| { |
| u32 i; |
| |
| if (tmr) { |
| i = get_timer(0); |
| while ((get_timer(0) - i) < (usec / 1000)) |
| ; |
| } else { |
| for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++) |
| ; |
| } |
| } |
| |
| static void timer_isr(void *arg) |
| { |
| timestamp++; |
| tmr->control = tmr->control | TIMER_INTERRUPT; |
| } |
| |
| int timer_init (void) |
| { |
| int irq = -1; |
| u32 preload = 0; |
| u32 ret = 0; |
| |
| #if defined(CONFIG_SYS_TIMER_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM) |
| preload = XILINX_CLOCK_FREQ / CONFIG_SYS_HZ; |
| irq = CONFIG_SYS_TIMER_0_IRQ; |
| tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR); |
| #endif |
| |
| if (tmr && preload && irq >= 0) { |
| tmr->loadreg = preload; |
| tmr->control = TIMER_INTERRUPT | TIMER_RESET; |
| tmr->control = TIMER_ENABLE | TIMER_ENABLE_INTR |\ |
| TIMER_RELOAD | TIMER_DOWN_COUNT; |
| timestamp = 0; |
| ret = install_interrupt_handler (irq, timer_isr, (void *)tmr); |
| if (ret) |
| tmr = NULL; |
| } |
| |
| /* No problem if timer is not found/initialized */ |
| return 0; |
| } |
| |
| /* |
| * This function is derived from PowerPC code (read timebase as long long). |
| * On Microblaze it just returns the timer value. |
| */ |
| unsigned long long get_ticks(void) |
| { |
| return get_timer(0); |
| } |
| |
| /* |
| * This function is derived from PowerPC code (timebase clock frequency). |
| * On Microblaze it returns the number of timer ticks per second. |
| */ |
| ulong get_tbclk(void) |
| { |
| return CONFIG_SYS_HZ; |
| } |