blob: 987fb66c17a32c6c73b7ae5437c513040244741d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2012 The Chromium OS Authors.
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef __ASM_GENERIC_GBL_DATA_H
#define __ASM_GENERIC_GBL_DATA_H
/*
* The following data structure is placed in some memory which is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
* some locked parts of the data cache) to allow for a minimum set of
* global variables during system initialization (until we have set
* up the memory controller so that we can use RAM).
*
* Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
*
* Each architecture has its own private fields. For now all are private
*/
#ifndef __ASSEMBLY__
#include <cyclic.h>
#include <event_internal.h>
#include <fdtdec.h>
#include <membuff.h>
#include <linux/list.h>
#include <linux/build_bug.h>
#include <asm-offsets.h>
struct acpi_ctx;
struct driver_rt;
typedef struct global_data gd_t;
/**
* struct global_data - global data structure
*/
struct global_data {
/**
* @bd: board information
*/
struct bd_info *bd;
/**
* @flags: global data flags
*
* See &enum gd_flags
*/
unsigned long flags;
/**
* @baudrate: baud rate of the serial interface
*/
unsigned int baudrate;
/**
* @cpu_clk: CPU clock rate in Hz
*/
unsigned long cpu_clk;
/**
* @bus_clk: platform clock rate in Hz
*/
unsigned long bus_clk;
/**
* @pci_clk: PCI clock rate in Hz
*/
/* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
unsigned long pci_clk;
/**
* @mem_clk: memory clock rate in Hz
*/
unsigned long mem_clk;
#if defined(CONFIG_VIDEO)
/**
* @fb_base: base address of frame buffer memory
*/
unsigned long fb_base;
#endif
#if defined(CONFIG_POST)
/**
* @post_log_word: active POST tests
*
* @post_log_word is a bit mask defining which POST tests are recorded
* (see constants POST_*).
*/
unsigned long post_log_word;
/**
* @post_log_res: POST results
*
* @post_log_res is a bit mask with the POST results. A bit with value 1
* indicates successful execution.
*/
unsigned long post_log_res;
/**
* @post_init_f_time: time in ms when post_init_f() started
*/
unsigned long post_init_f_time;
#endif
#ifdef CONFIG_BOARD_TYPES
/**
* @board_type: board type
*
* If a U-Boot configuration supports multiple board types, the actual
* board type may be stored in this field.
*/
unsigned long board_type;
#endif
/**
* @have_console: console is available
*
* A value of 1 indicates that serial_init() was called and a console
* is available.
* A value of 0 indicates that console input and output drivers shall
* not be called.
*/
unsigned long have_console;
#if CONFIG_IS_ENABLED(PRE_CONSOLE_BUFFER)
/**
* @precon_buf_idx: pre-console buffer index
*
* @precon_buf_idx indicates the current position of the
* buffer used to collect output before the console becomes
* available. When negative, the pre-console buffer is
* temporarily disabled (used when the pre-console buffer is
* being written out, to prevent adding its contents to
* itself).
*/
long precon_buf_idx;
#endif
/**
* @env_addr: address of environment structure
*
* @env_addr contains the address of the structure holding the
* environment variables.
*/
unsigned long env_addr;
/**
* @env_valid: environment is valid
*
* See &enum env_valid
*/
unsigned long env_valid;
/**
* @env_has_init: bit mask indicating environment locations
*
* &enum env_location defines which bit relates to which location
*/
unsigned long env_has_init;
/**
* @env_load_prio: priority of the loaded environment
*/
int env_load_prio;
/**
* @ram_base: base address of RAM used by U-Boot
*/
unsigned long ram_base;
/**
* @ram_top: top address of RAM used by U-Boot
*/
phys_addr_t ram_top;
/**
* @relocaddr: start address of U-Boot in RAM
*
* After relocation this field indicates the address to which U-Boot
* has been relocated. It can be displayed using the bdinfo command.
* Its value is needed to display the source code when debugging with
* GDB using the 'add-symbol-file u-boot <relocaddr>' command.
*/
unsigned long relocaddr;
/**
* @ram_size: RAM size in bytes
*/
phys_size_t ram_size;
/**
* @mon_len: monitor length in bytes
*/
unsigned long mon_len;
/**
* @irq_sp: IRQ stack pointer
*/
unsigned long irq_sp;
/**
* @start_addr_sp: initial stack pointer address
*/
unsigned long start_addr_sp;
/**
* @reloc_off: relocation offset
*/
unsigned long reloc_off;
/**
* @new_gd: pointer to relocated global data
*/
struct global_data *new_gd;
#ifdef CONFIG_DM
/**
* @dm_root: root instance for Driver Model
*/
struct udevice *dm_root;
/**
* @dm_root_f: pre-relocation root instance
*/
struct udevice *dm_root_f;
/**
* @uclass_root_s:
* head of core tree when uclasses are not in read-only memory.
*
* When uclasses are in read-only memory, @uclass_root_s is not used and
* @uclass_root points to the root node generated by dtoc.
*/
struct list_head uclass_root_s;
/**
* @uclass_root:
* pointer to head of core tree, if uclasses are in read-only memory and
* cannot be adjusted to use @uclass_root as a list head.
*
* When not in read-only memory, @uclass_root_s is used to hold the
* uclass root, and @uclass_root points to the address of
* @uclass_root_s.
*/
struct list_head *uclass_root;
# if CONFIG_IS_ENABLED(OF_PLATDATA_DRIVER_RT)
/** @dm_driver_rt: Dynamic info about the driver */
struct driver_rt *dm_driver_rt;
# endif
#if CONFIG_IS_ENABLED(OF_PLATDATA_RT)
/** @dm_udevice_rt: Dynamic info about the udevice */
struct udevice_rt *dm_udevice_rt;
/**
* @dm_priv_base: Base address of the priv/plat region used when
* udevices and uclasses are in read-only memory. This is NULL if not
* used
*/
void *dm_priv_base;
# endif
#endif
#ifdef CONFIG_TIMER
/**
* @timer: timer instance for Driver Model
*/
struct udevice *timer;
#endif
/**
* @fdt_blob: U-Boot's own device tree, NULL if none
*/
const void *fdt_blob;
/**
* @new_fdt: relocated device tree
*/
void *new_fdt;
/**
* @fdt_size: space reserved for relocated device space
*/
unsigned long fdt_size;
/**
* @fdt_src: Source of FDT
*/
enum fdt_source_t fdt_src;
#if CONFIG_IS_ENABLED(OF_LIVE)
/**
* @of_root: root node of the live tree
*/
struct device_node *of_root;
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
/**
* @multi_dtb_fit: pointer to uncompressed multi-dtb FIT image
*/
const void *multi_dtb_fit;
#endif
/**
* @jt: jump table
*
* The jump table contains pointers to exported functions. A pointer to
* the jump table is passed to standalone applications.
*/
struct jt_funcs *jt;
/**
* @env_buf: buffer for env_get() before reloc
*/
char env_buf[32];
#ifdef CONFIG_TRACE
/**
* @trace_buff: trace buffer
*
* When tracing function in U-Boot this field points to the buffer
* recording the function calls.
*/
void *trace_buff;
#endif
#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
/**
* @cur_i2c_bus: currently used I2C bus
*/
int cur_i2c_bus;
#endif
/**
* @timebase_h: high 32 bits of timer
*/
unsigned int timebase_h;
/**
* @timebase_l: low 32 bits of timer
*/
unsigned int timebase_l;
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
/**
* @malloc_base: base address of early malloc()
*/
unsigned long malloc_base;
/**
* @malloc_limit: limit address of early malloc()
*/
unsigned long malloc_limit;
/**
* @malloc_ptr: current address of early malloc()
*/
unsigned long malloc_ptr;
#endif
#ifdef CONFIG_PCI
/**
* @hose: PCI hose for early use
*/
struct pci_controller *hose;
/**
* @pci_ram_top: top of region accessible to PCI
*/
phys_addr_t pci_ram_top;
#endif
#ifdef CONFIG_PCI_BOOTDELAY
/**
* @pcidelay_done: delay time before scanning of PIC hose expired
*
* If CONFIG_PCI_BOOTDELAY=y, pci_hose_scan() waits for the number of
* milliseconds defined by environment variable pcidelay before
* scanning. Once this delay has expired the flag @pcidelay_done
* is set to 1.
*/
int pcidelay_done;
#endif
/**
* @cur_serial_dev: current serial device
*/
struct udevice *cur_serial_dev;
/**
* @arch: architecture-specific data
*/
struct arch_global_data arch;
#ifdef CONFIG_CONSOLE_RECORD
/**
* @console_out: output buffer for console recording
*
* This buffer is used to collect output during console recording.
*/
struct membuff console_out;
/**
* @console_in: input buffer for console recording
*
* If console recording is activated, this buffer can be used to
* emulate input.
*/
struct membuff console_in;
#endif
#ifdef CONFIG_VIDEO
/**
* @video_top: top of video frame buffer area
*/
ulong video_top;
/**
* @video_bottom: bottom of video frame buffer area
*/
ulong video_bottom;
#endif
#ifdef CONFIG_BOOTSTAGE
/**
* @bootstage: boot stage information
*/
struct bootstage_data *bootstage;
/**
* @new_bootstage: relocated boot stage information
*/
struct bootstage_data *new_bootstage;
#endif
#ifdef CONFIG_LOG
/**
* @log_drop_count: number of dropped log messages
*
* This counter is incremented for each log message which can not
* be processed because logging is not yet available as signaled by
* flag %GD_FLG_LOG_READY in @flags.
*/
int log_drop_count;
/**
* @default_log_level: default logging level
*
* For logging devices without filters @default_log_level defines the
* logging level, cf. &enum log_level_t.
*/
int default_log_level;
/**
* @log_head: list of logging devices
*/
struct list_head log_head;
/**
* @log_fmt: bit mask for logging format
*
* The @log_fmt bit mask selects the fields to be shown in log messages.
* &enum log_fmt defines the bits of the bit mask.
*/
int log_fmt;
/**
* @processing_msg: a log message is being processed
*
* This flag is used to suppress the creation of additional messages
* while another message is being processed.
*/
bool processing_msg;
/**
* @logc_prev: logging category of previous message
*
* This value is used as logging category for continuation messages.
*/
int logc_prev;
/**
* @logl_prev: logging level of the previous message
*
* This value is used as logging level for continuation messages.
*/
int logl_prev;
/**
* @log_cont: Previous log line did not finished wtih \n
*
* This allows for chained log messages on the same line
*/
bool log_cont;
#endif
#if CONFIG_IS_ENABLED(BLOBLIST)
/**
* @bloblist: blob list information
*/
struct bloblist_hdr *bloblist;
/**
* @new_bloblist: relocated blob list information
*/
struct bloblist_hdr *new_bloblist;
#endif
#if CONFIG_IS_ENABLED(HANDOFF)
/**
* @spl_handoff: SPL hand-off information
*/
struct spl_handoff *spl_handoff;
#endif
#if defined(CONFIG_TRANSLATION_OFFSET)
/**
* @translation_offset: optional translation offset
*
* See CONFIG_TRANSLATION_OFFSET.
*/
fdt_addr_t translation_offset;
#endif
#ifdef CONFIG_GENERATE_ACPI_TABLE
/**
* @acpi_ctx: ACPI context pointer
*/
struct acpi_ctx *acpi_ctx;
/**
* @acpi_start: Start address of ACPI tables
*/
ulong acpi_start;
#endif
#if CONFIG_IS_ENABLED(GENERATE_SMBIOS_TABLE)
/**
* @smbios_version: Points to SMBIOS type 0 version
*/
char *smbios_version;
#endif
#if CONFIG_IS_ENABLED(EVENT)
/**
* @event_state: Points to the current state of events
*/
struct event_state event_state;
#endif
#ifdef CONFIG_CYCLIC
/**
* @cyclic_list: list of registered cyclic functions
*/
struct hlist_head cyclic_list;
#endif
/**
* @dmtag_list: List of DM tags
*/
struct list_head dmtag_list;
};
#ifndef DO_DEPS_ONLY
static_assert(sizeof(struct global_data) == GD_SIZE);
#endif
/**
* gd_board_type() - retrieve board type
*
* Return: global board type
*/
#ifdef CONFIG_BOARD_TYPES
#define gd_board_type() gd->board_type
#else
#define gd_board_type() 0
#endif
/* These macros help avoid #ifdefs in the code */
#if CONFIG_IS_ENABLED(OF_LIVE)
#define gd_of_root() gd->of_root
#define gd_of_root_ptr() &gd->of_root
#define gd_set_of_root(_root) gd->of_root = (_root)
#else
#define gd_of_root() NULL
#define gd_of_root_ptr() NULL
#define gd_set_of_root(_root)
#endif
#if CONFIG_IS_ENABLED(OF_PLATDATA_DRIVER_RT)
#define gd_set_dm_driver_rt(dyn) gd->dm_driver_rt = dyn
#define gd_dm_driver_rt() gd->dm_driver_rt
#else
#define gd_set_dm_driver_rt(dyn)
#define gd_dm_driver_rt() NULL
#endif
#if CONFIG_IS_ENABLED(OF_PLATDATA_RT)
#define gd_set_dm_udevice_rt(dyn) gd->dm_udevice_rt = dyn
#define gd_dm_udevice_rt() gd->dm_udevice_rt
#define gd_set_dm_priv_base(dyn) gd->dm_priv_base = dyn
#define gd_dm_priv_base() gd->dm_priv_base
#else
#define gd_set_dm_udevice_rt(dyn)
#define gd_dm_udevice_rt() NULL
#define gd_set_dm_priv_base(dyn)
#define gd_dm_priv_base() NULL
#endif
#ifdef CONFIG_GENERATE_ACPI_TABLE
#define gd_acpi_ctx() gd->acpi_ctx
#define gd_acpi_start() gd->acpi_start
#define gd_set_acpi_start(addr) gd->acpi_start = addr
#else
#define gd_acpi_ctx() NULL
#define gd_acpi_start() 0UL
#define gd_set_acpi_start(addr)
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
#define gd_multi_dtb_fit() gd->multi_dtb_fit
#define gd_set_multi_dtb_fit(_dtb) gd->multi_dtb_fit = _dtb
#else
#define gd_multi_dtb_fit() NULL
#define gd_set_multi_dtb_fit(_dtb)
#endif
#if CONFIG_IS_ENABLED(EVENT_DYNAMIC)
#define gd_event_state() ((struct event_state *)&gd->event_state)
#else
#define gd_event_state() NULL
#endif
/**
* enum gd_flags - global data flags
*
* See field flags of &struct global_data.
*/
enum gd_flags {
/**
* @GD_FLG_RELOC: code was relocated to RAM
*/
GD_FLG_RELOC = 0x00001,
/**
* @GD_FLG_DEVINIT: devices have been initialized
*/
GD_FLG_DEVINIT = 0x00002,
/**
* @GD_FLG_SILENT: silent mode
*/
GD_FLG_SILENT = 0x00004,
/**
* @GD_FLG_POSTFAIL: critical POST test failed
*/
GD_FLG_POSTFAIL = 0x00008,
/**
* @GD_FLG_POSTSTOP: POST sequence aborted
*/
GD_FLG_POSTSTOP = 0x00010,
/**
* @GD_FLG_LOGINIT: log Buffer has been initialized
*/
GD_FLG_LOGINIT = 0x00020,
/**
* @GD_FLG_DISABLE_CONSOLE: disable console (in & out)
*/
GD_FLG_DISABLE_CONSOLE = 0x00040,
/**
* @GD_FLG_ENV_READY: environment imported into hash table
*/
GD_FLG_ENV_READY = 0x00080,
/**
* @GD_FLG_SERIAL_READY: pre-relocation serial console ready
*/
GD_FLG_SERIAL_READY = 0x00100,
/**
* @GD_FLG_FULL_MALLOC_INIT: full malloc() is ready
*/
GD_FLG_FULL_MALLOC_INIT = 0x00200,
/**
* @GD_FLG_SPL_INIT: spl_init() has been called
*/
GD_FLG_SPL_INIT = 0x00400,
/**
* @GD_FLG_SKIP_RELOC: don't relocate
*/
GD_FLG_SKIP_RELOC = 0x00800,
/**
* @GD_FLG_RECORD: record console
*/
GD_FLG_RECORD = 0x01000,
/**
* @GD_FLG_RECORD_OVF: record console overflow
*/
GD_FLG_RECORD_OVF = 0x02000,
/**
* @GD_FLG_ENV_DEFAULT: default variable flag
*/
GD_FLG_ENV_DEFAULT = 0x04000,
/**
* @GD_FLG_SPL_EARLY_INIT: early SPL initialization is done
*/
GD_FLG_SPL_EARLY_INIT = 0x08000,
/**
* @GD_FLG_LOG_READY: log system is ready for use
*/
GD_FLG_LOG_READY = 0x10000,
/**
* @GD_FLG_CYCLIC_RUNNING: cyclic_run is in progress
*/
GD_FLG_CYCLIC_RUNNING = 0x20000,
/**
* @GD_FLG_SKIP_LL_INIT: don't perform low-level initialization
*/
GD_FLG_SKIP_LL_INIT = 0x40000,
/**
* @GD_FLG_SMP_READY: SMP initialization is complete
*/
GD_FLG_SMP_READY = 0x80000,
/**
* @GD_FLG_FDT_CHANGED: Device tree change has been detected by tests
*/
GD_FLG_FDT_CHANGED = 0x100000,
/**
* @GD_FLG_OF_TAG_MIGRATE: Device tree has old u-boot,dm- tags
*/
GD_FLG_OF_TAG_MIGRATE = 0x200000,
};
#endif /* __ASSEMBLY__ */
#endif /* __ASM_GENERIC_GBL_DATA_H */