| /* |
| * (C) Copyright 2014 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * Copyright 2014 Red Hat, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H |
| #define _CONFIG_CMD_DISTRO_BOOTCMD_H |
| |
| /* |
| * A note on error handling: It is possible for BOOT_TARGET_DEVICES to |
| * reference a device that is not enabled in the U-Boot configuration, e.g. |
| * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given |
| * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor |
| * at compile time, it's not possible to detect and report such problems via |
| * a simple #ifdef/#error combination. Still, the code needs to report errors. |
| * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to |
| * reference a non-existent symbol, and have the name of that symbol encode |
| * the error message. Consequently, this file contains references to e.g. |
| * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the |
| * prevalence of capitals here, this looks like a pre-processor macro and |
| * hence seems like it should be all capitals, but it's really an error |
| * message that includes some other pre-processor symbols in the text. |
| */ |
| |
| /* We need the part command */ |
| #define CONFIG_PARTITION_UUIDS |
| #define CONFIG_CMD_PART |
| |
| #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ |
| "if " #devtypel " dev ${devnum}; then " \ |
| "setenv devtype " #devtypel "; " \ |
| "run scan_dev_for_boot_part; " \ |
| "fi\0" |
| |
| #define BOOTENV_SHARED_BLKDEV(devtypel) \ |
| #devtypel "_boot=" \ |
| BOOTENV_SHARED_BLKDEV_BODY(devtypel) |
| |
| #define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \ |
| "bootcmd_" #devtypel #instance "=" \ |
| "setenv devnum " #instance "; " \ |
| "run " #devtypel "_boot\0" |
| |
| #define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \ |
| #devtypel #instance " " |
| |
| #ifdef CONFIG_SANDBOX |
| #define BOOTENV_SHARED_HOST BOOTENV_SHARED_BLKDEV(host) |
| #define BOOTENV_DEV_HOST BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_HOST BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_SHARED_HOST |
| #define BOOTENV_DEV_HOST \ |
| BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX |
| #define BOOTENV_DEV_NAME_HOST \ |
| BOOT_TARGET_DEVICES_references_HOST_without_CONFIG_SANDBOX |
| #endif |
| |
| #ifdef CONFIG_CMD_MMC |
| #define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc) |
| #define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_SHARED_MMC |
| #define BOOTENV_DEV_MMC \ |
| BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC |
| #define BOOTENV_DEV_NAME_MMC \ |
| BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC |
| #endif |
| |
| #ifdef CONFIG_CMD_UBIFS |
| #define BOOTENV_SHARED_UBIFS \ |
| "ubifs_boot=" \ |
| "if ubi part UBI && ubifsmount ubi${devnum}:boot; then " \ |
| "setenv devtype ubi; " \ |
| "setenv bootpart 0; " \ |
| "run scan_dev_for_boot; " \ |
| "fi\0" |
| #define BOOTENV_DEV_UBIFS BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_UBIFS BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_SHARED_UBIFS |
| #define BOOTENV_DEV_UBIFS \ |
| BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS |
| #define BOOTENV_DEV_NAME_UBIFS \ |
| BOOT_TARGET_DEVICES_references_UBIFS_without_CONFIG_CMD_UBIFS |
| #endif |
| |
| #ifdef CONFIG_EFI_LOADER |
| #if defined(CONFIG_ARM64) |
| #define BOOTEFI_NAME "bootaa64.efi" |
| #elif defined(CONFIG_ARM) |
| #define BOOTEFI_NAME "bootarm.efi" |
| #endif |
| #endif |
| |
| #ifdef BOOTEFI_NAME |
| #if defined(CONFIG_ARM) && !defined(CONFIG_ARM64) |
| /* |
| * On 32bit ARM systems there is a reasonable number of systems that follow |
| * the $soc-$board$boardver.dtb name scheme for their device trees. Use that |
| * scheme if we don't have an explicit fdtfile variable. |
| */ |
| #define BOOTENV_EFI_SET_FDTFILE_FALLBACK \ |
| "if test -z \"${fdtfile}\" -a -n \"${soc}\"; then " \ |
| "setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; " \ |
| "fi; " |
| #else |
| #define BOOTENV_EFI_SET_FDTFILE_FALLBACK |
| #endif |
| |
| |
| #define BOOTENV_SHARED_EFI \ |
| "boot_efi_binary=" \ |
| "load ${devtype} ${devnum}:${distro_bootpart} " \ |
| "${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; " \ |
| "if fdt addr ${fdt_addr_r}; then " \ |
| "bootefi ${kernel_addr_r} ${fdt_addr_r};" \ |
| "else " \ |
| "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \ |
| "fi\0" \ |
| \ |
| "load_efi_dtb=" \ |
| "load ${devtype} ${devnum}:${distro_bootpart} " \ |
| "${fdt_addr_r} ${prefix}${efi_fdtfile}\0" \ |
| \ |
| "efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \ |
| "scan_dev_for_efi=" \ |
| "setenv efi_fdtfile ${fdtfile}; " \ |
| BOOTENV_EFI_SET_FDTFILE_FALLBACK \ |
| "for prefix in ${efi_dtb_prefixes}; do " \ |
| "if test -e ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "${prefix}${efi_fdtfile}; then " \ |
| "run load_efi_dtb; " \ |
| "fi;" \ |
| "done;" \ |
| "if test -e ${devtype} ${devnum}:${distro_bootpart} " \ |
| "efi/boot/"BOOTEFI_NAME"; then " \ |
| "echo Found EFI removable media binary " \ |
| "efi/boot/"BOOTEFI_NAME"; " \ |
| "run boot_efi_binary; " \ |
| "echo EFI LOAD FAILED: continuing...; " \ |
| "fi; " \ |
| "setenv efi_fdtfile\0" |
| #define SCAN_DEV_FOR_EFI "run scan_dev_for_efi;" |
| #else |
| #define BOOTENV_SHARED_EFI |
| #define SCAN_DEV_FOR_EFI |
| #endif |
| |
| #ifdef CONFIG_CMD_SATA |
| #define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata) |
| #define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_SHARED_SATA |
| #define BOOTENV_DEV_SATA \ |
| BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA |
| #define BOOTENV_DEV_NAME_SATA \ |
| BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA |
| #endif |
| |
| #ifdef CONFIG_SCSI |
| #define BOOTENV_RUN_SCSI_INIT "run scsi_init; " |
| #define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " |
| #define BOOTENV_SHARED_SCSI \ |
| "scsi_init=" \ |
| "if ${scsi_need_init}; then " \ |
| "setenv scsi_need_init false; " \ |
| "scsi scan; " \ |
| "fi\0" \ |
| \ |
| "scsi_boot=" \ |
| BOOTENV_RUN_SCSI_INIT \ |
| BOOTENV_SHARED_BLKDEV_BODY(scsi) |
| #define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_RUN_SCSI_INIT |
| #define BOOTENV_SET_SCSI_NEED_INIT |
| #define BOOTENV_SHARED_SCSI |
| #define BOOTENV_DEV_SCSI \ |
| BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI |
| #define BOOTENV_DEV_NAME_SCSI \ |
| BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI |
| #endif |
| |
| #ifdef CONFIG_CMD_IDE |
| #define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide) |
| #define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_SHARED_IDE |
| #define BOOTENV_DEV_IDE \ |
| BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE |
| #define BOOTENV_DEV_NAME_IDE \ |
| BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE |
| #endif |
| |
| #if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) |
| #define BOOTENV_RUN_NET_PCI_ENUM "run boot_net_pci_enum; " |
| #define BOOTENV_SHARED_PCI \ |
| "boot_net_pci_enum=pci enum\0" |
| #else |
| #define BOOTENV_RUN_NET_PCI_ENUM |
| #define BOOTENV_SHARED_PCI |
| #endif |
| |
| #ifdef CONFIG_CMD_USB |
| #define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; " |
| #define BOOTENV_SHARED_USB \ |
| "boot_net_usb_start=usb start\0" \ |
| "usb_boot=" \ |
| "usb start; " \ |
| BOOTENV_SHARED_BLKDEV_BODY(usb) |
| #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV |
| #define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV |
| #else |
| #define BOOTENV_RUN_NET_USB_START |
| #define BOOTENV_SHARED_USB |
| #define BOOTENV_DEV_USB \ |
| BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB |
| #define BOOTENV_DEV_NAME_USB \ |
| BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB |
| #endif |
| |
| #if defined(CONFIG_CMD_DHCP) |
| #if defined(CONFIG_EFI_LOADER) |
| #if defined(CONFIG_ARM64) |
| #define BOOTENV_EFI_PXE_ARCH "0xb" |
| #define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000" |
| #elif defined(CONFIG_ARM) |
| #define BOOTENV_EFI_PXE_ARCH "0xa" |
| #define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00010:UNDI:003000" |
| #elif defined(CONFIG_X86) |
| /* Always assume we're running 64bit */ |
| #define BOOTENV_EFI_PXE_ARCH "0x7" |
| #define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000" |
| #else |
| #error Please specify an EFI client identifier |
| #endif |
| |
| /* |
| * Ask the dhcp server for an EFI binary. If we get one, check for a |
| * device tree in the same folder. Then boot everything. If the file was |
| * not an EFI binary, we just return from the bootefi command and continue. |
| */ |
| #define BOOTENV_EFI_RUN_DHCP \ |
| "setenv efi_fdtfile ${fdtfile}; " \ |
| BOOTENV_EFI_SET_FDTFILE_FALLBACK \ |
| "setenv efi_old_vci ${bootp_vci};" \ |
| "setenv efi_old_arch ${bootp_arch};" \ |
| "setenv bootp_vci " BOOTENV_EFI_PXE_VCI ";" \ |
| "setenv bootp_arch " BOOTENV_EFI_PXE_ARCH ";" \ |
| "if dhcp ${kernel_addr_r}; then " \ |
| "tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};" \ |
| "if fdt addr ${fdt_addr_r}; then " \ |
| "bootefi ${kernel_addr_r} ${fdt_addr_r}; " \ |
| "else " \ |
| "bootefi ${kernel_addr_r} ${fdtcontroladdr};" \ |
| "fi;" \ |
| "fi;" \ |
| "setenv bootp_vci ${efi_old_vci};" \ |
| "setenv bootp_arch ${efi_old_arch};" \ |
| "setenv efi_fdtfile;" \ |
| "setenv efi_old_arch;" \ |
| "setenv efi_old_vci;" |
| #else |
| #define BOOTENV_EFI_RUN_DHCP |
| #endif |
| #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ |
| "bootcmd_dhcp=" \ |
| BOOTENV_RUN_NET_USB_START \ |
| BOOTENV_RUN_NET_PCI_ENUM \ |
| "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ |
| "source ${scriptaddr}; " \ |
| "fi;" \ |
| BOOTENV_EFI_RUN_DHCP \ |
| "\0" |
| #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ |
| "dhcp " |
| #else |
| #define BOOTENV_DEV_DHCP \ |
| BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP |
| #define BOOTENV_DEV_NAME_DHCP \ |
| BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP |
| #endif |
| |
| #if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE) |
| #define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \ |
| "bootcmd_pxe=" \ |
| BOOTENV_RUN_NET_USB_START \ |
| BOOTENV_RUN_NET_PCI_ENUM \ |
| "dhcp; " \ |
| "if pxe get; then " \ |
| "pxe boot; " \ |
| "fi\0" |
| #define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \ |
| "pxe " |
| #else |
| #define BOOTENV_DEV_PXE \ |
| BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE |
| #define BOOTENV_DEV_NAME_PXE \ |
| BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE |
| #endif |
| |
| #define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \ |
| BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance) |
| #define BOOTENV_BOOT_TARGETS \ |
| "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" |
| |
| #define BOOTENV_DEV(devtypeu, devtypel, instance) \ |
| BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance) |
| #define BOOTENV \ |
| BOOTENV_SHARED_HOST \ |
| BOOTENV_SHARED_MMC \ |
| BOOTENV_SHARED_PCI \ |
| BOOTENV_SHARED_USB \ |
| BOOTENV_SHARED_SATA \ |
| BOOTENV_SHARED_SCSI \ |
| BOOTENV_SHARED_IDE \ |
| BOOTENV_SHARED_UBIFS \ |
| BOOTENV_SHARED_EFI \ |
| "boot_prefixes=/ /boot/\0" \ |
| "boot_scripts=boot.scr.uimg boot.scr\0" \ |
| "boot_script_dhcp=boot.scr.uimg\0" \ |
| BOOTENV_BOOT_TARGETS \ |
| \ |
| "boot_extlinux=" \ |
| "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \ |
| "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ |
| \ |
| "scan_dev_for_extlinux=" \ |
| "if test -e ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "${prefix}extlinux/extlinux.conf; then " \ |
| "echo Found ${prefix}extlinux/extlinux.conf; " \ |
| "run boot_extlinux; " \ |
| "echo SCRIPT FAILED: continuing...; " \ |
| "fi\0" \ |
| \ |
| "boot_a_script=" \ |
| "load ${devtype} ${devnum}:${distro_bootpart} " \ |
| "${scriptaddr} ${prefix}${script}; " \ |
| "source ${scriptaddr}\0" \ |
| \ |
| "scan_dev_for_scripts=" \ |
| "for script in ${boot_scripts}; do " \ |
| "if test -e ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "${prefix}${script}; then " \ |
| "echo Found U-Boot script " \ |
| "${prefix}${script}; " \ |
| "run boot_a_script; " \ |
| "echo SCRIPT FAILED: continuing...; " \ |
| "fi; " \ |
| "done\0" \ |
| \ |
| "scan_dev_for_boot=" \ |
| "echo Scanning ${devtype} " \ |
| "${devnum}:${distro_bootpart}...; " \ |
| "for prefix in ${boot_prefixes}; do " \ |
| "run scan_dev_for_extlinux; " \ |
| "run scan_dev_for_scripts; " \ |
| "done;" \ |
| SCAN_DEV_FOR_EFI \ |
| "\0" \ |
| \ |
| "scan_dev_for_boot_part=" \ |
| "part list ${devtype} ${devnum} -bootable devplist; " \ |
| "env exists devplist || setenv devplist 1; " \ |
| "for distro_bootpart in ${devplist}; do " \ |
| "if fstype ${devtype} " \ |
| "${devnum}:${distro_bootpart} " \ |
| "bootfstype; then " \ |
| "run scan_dev_for_boot; " \ |
| "fi; " \ |
| "done\0" \ |
| \ |
| BOOT_TARGET_DEVICES(BOOTENV_DEV) \ |
| \ |
| "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ |
| "for target in ${boot_targets}; do " \ |
| "run bootcmd_${target}; " \ |
| "done\0" |
| |
| #ifndef CONFIG_BOOTCOMMAND |
| #define CONFIG_BOOTCOMMAND "run distro_bootcmd" |
| #endif |
| |
| #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ |