| /* |
| * Copyright (C) 2005-2006 Atmel Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| |
| #include <asm/io.h> |
| #include <asm/sdram.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hmatrix.h> |
| #include <asm/arch/mmu.h> |
| #include <asm/arch/portmux.h> |
| #include <netdev.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { |
| { |
| .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT, |
| .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT, |
| .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT) |
| | MMU_VMR_CACHE_NONE, |
| }, { |
| .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT, |
| .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT, |
| .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT) |
| | MMU_VMR_CACHE_WRBACK, |
| }, |
| }; |
| |
| static const struct sdram_config sdram_config = { |
| .data_bits = SDRAM_DATA_32BIT, |
| #ifdef CONFIG_ATSTK1000_16MB_SDRAM |
| /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */ |
| .row_bits = 12, |
| #else |
| /* MT48LC2M32B2P-5 (8 MB) on motherboard */ |
| .row_bits = 11, |
| #endif |
| .col_bits = 8, |
| .bank_bits = 2, |
| .cas = 3, |
| .twr = 2, |
| .trc = 7, |
| .trp = 2, |
| .trcd = 2, |
| .tras = 5, |
| .txsr = 5, |
| /* 15.6 us */ |
| .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, |
| }; |
| |
| int board_early_init_f(void) |
| { |
| /* Enable SDRAM in the EBI mux */ |
| hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); |
| |
| portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH); |
| sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config); |
| |
| portmux_enable_usart1(PORTMUX_DRIVE_MIN); |
| |
| #if defined(CONFIG_MACB) |
| portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW); |
| portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW); |
| #endif |
| #if defined(CONFIG_MMC) |
| portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); |
| #endif |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| gd->bd->bi_phy_id[0] = 0x10; |
| gd->bd->bi_phy_id[1] = 0x11; |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_NET |
| int board_eth_init(bd_t *bi) |
| { |
| macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]); |
| macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]); |
| return 0; |
| } |
| #endif |