| /* |
| * (C) Copyright 2000 - 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| ******************************************************************** |
| * NOTE: This header file defines an interface to U-Boot. Including |
| * this (unmodified) header file in another file is considered normal |
| * use of U-Boot, and does *not* fall under the heading of "derived |
| * work". |
| ******************************************************************** |
| */ |
| |
| #ifndef __U_BOOT_H__ |
| #define __U_BOOT_H__ |
| |
| /* |
| * Board information passed to Linux kernel from U-Boot |
| * |
| * include/asm-ppc/u-boot.h |
| */ |
| |
| #ifndef __ASSEMBLY__ |
| |
| typedef struct bd_info { |
| unsigned long bi_memstart; /* start of DRAM memory */ |
| unsigned long bi_memsize; /* size of DRAM memory in bytes */ |
| unsigned long bi_flashstart; /* start of FLASH memory */ |
| unsigned long bi_flashsize; /* size of FLASH memory */ |
| unsigned long bi_flashoffset; /* reserved area for startup monitor */ |
| unsigned long bi_sramstart; /* start of SRAM memory */ |
| unsigned long bi_sramsize; /* size of SRAM memory */ |
| #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ |
| || defined(CONFIG_E500) |
| unsigned long bi_immr_base; /* base of IMMR register */ |
| #endif |
| #if defined(CONFIG_MPC5xxx) |
| unsigned long bi_mbar_base; /* base of internal registers */ |
| #endif |
| #if defined(CONFIG_MPC83XX) |
| unsigned long bi_immrbar; |
| #endif |
| #if defined(CONFIG_MPC8220) |
| unsigned long bi_mbar_base; /* base of internal registers */ |
| unsigned long bi_inpfreq; /* Input Freq, In MHz */ |
| unsigned long bi_pcifreq; /* PCI Freq, in MHz */ |
| unsigned long bi_pevfreq; /* PEV Freq, in MHz */ |
| unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ |
| unsigned long bi_vcofreq; /* VCO Freq, in MHz */ |
| #endif |
| unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ |
| unsigned long bi_ip_addr; /* IP Address */ |
| unsigned char bi_enetaddr[6]; /* Ethernet adress */ |
| unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ |
| unsigned long bi_intfreq; /* Internal Freq, in MHz */ |
| unsigned long bi_busfreq; /* Bus Freq, in MHz */ |
| #if defined(CONFIG_CPM2) |
| unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ |
| unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ |
| unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ |
| unsigned long bi_vco; /* VCO Out from PLL, in MHz */ |
| #endif |
| #if defined(CONFIG_MPC5xxx) |
| unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ |
| unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ |
| #endif |
| unsigned long bi_baudrate; /* Console Baudrate */ |
| #if defined(CONFIG_405) || \ |
| defined(CONFIG_405GP) || \ |
| defined(CONFIG_405CR) || \ |
| defined(CONFIG_405EP) || \ |
| defined(CONFIG_440) |
| unsigned char bi_s_version[4]; /* Version of this structure */ |
| unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */ |
| unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ |
| unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ |
| unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ |
| unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ |
| #endif |
| #if defined(CONFIG_HYMOD) |
| hymod_conf_t bi_hymod_conf; /* hymod configuration information */ |
| #endif |
| |
| #ifdef CONFIG_HAS_ETH1 |
| /* second onboard ethernet port */ |
| unsigned char bi_enet1addr[6]; |
| #endif |
| #ifdef CONFIG_HAS_ETH2 |
| /* third onboard ethernet port */ |
| unsigned char bi_enet2addr[6]; |
| #endif |
| #ifdef CONFIG_HAS_ETH3 |
| unsigned char bi_enet3addr[6]; |
| #endif |
| |
| #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \ |
| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) |
| unsigned int bi_opbfreq; /* OPB clock in Hz */ |
| int bi_iic_fast[2]; /* Use fast i2c mode */ |
| #endif |
| #if defined(CONFIG_NX823) |
| unsigned char bi_sernum[8]; |
| #endif |
| #if defined(CONFIG_4xx) |
| #if defined(CONFIG_440GX) |
| int bi_phynum[4]; /* Determines phy mapping */ |
| int bi_phymode[4]; /* Determines phy mode */ |
| #elif defined(CONFIG_405EP) || defined(CONFIG_440) |
| int bi_phynum[2]; /* Determines phy mapping */ |
| int bi_phymode[2]; /* Determines phy mode */ |
| #else |
| int bi_phynum[1]; /* Determines phy mapping */ |
| int bi_phymode[1]; /* Determines phy mode */ |
| #endif |
| #endif /* defined(CONFIG_4xx) */ |
| } bd_t; |
| |
| #endif /* __ASSEMBLY__ */ |
| #endif /* __U_BOOT_H__ */ |