| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <netdev.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_law.h> |
| #include <fsl_ddr_sdram.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_portals.h> |
| #include <asm/fsl_liodn.h> |
| #include <malloc.h> |
| #include <fm_eth.h> |
| #include <fsl_mdio.h> |
| #include <miiphy.h> |
| #include <phy.h> |
| #include <fsl_dtsec.h> |
| #include <asm/fsl_serdes.h> |
| #include <hwconfig.h> |
| #include "../common/qixis.h" |
| #include "../common/fman.h" |
| |
| #include "t4240qds_qixis.h" |
| |
| #define EMI_NONE 0xFFFFFFFF |
| #define EMI1_RGMII 0 |
| #define EMI1_SLOT1 1 |
| #define EMI1_SLOT2 2 |
| #define EMI1_SLOT3 3 |
| #define EMI1_SLOT4 4 |
| #define EMI1_SLOT5 5 |
| #define EMI1_SLOT7 7 |
| #define EMI2 8 |
| /* Slot6 and Slot8 do not have EMI connections */ |
| |
| static int mdio_mux[NUM_FM_PORTS]; |
| |
| static const char *mdio_names[] = { |
| "T4240QDS_MDIO0", |
| "T4240QDS_MDIO1", |
| "T4240QDS_MDIO2", |
| "T4240QDS_MDIO3", |
| "T4240QDS_MDIO4", |
| "T4240QDS_MDIO5", |
| "NULL", |
| "T4240QDS_MDIO7", |
| "T4240QDS_10GC", |
| }; |
| |
| static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; |
| static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; |
| static u8 slot_qsgmii_phyaddr[5][4] = { |
| {0, 0, 0, 0},/* not used, to make index match slot No. */ |
| {0, 1, 2, 3}, |
| {4, 5, 6, 7}, |
| {8, 9, 0xa, 0xb}, |
| {0xc, 0xd, 0xe, 0xf}, |
| }; |
| static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0}; |
| |
| static const char *t4240qds_mdio_name_for_muxval(u8 muxval) |
| { |
| return mdio_names[muxval]; |
| } |
| |
| struct mii_dev *mii_dev_for_muxval(u8 muxval) |
| { |
| struct mii_dev *bus; |
| const char *name = t4240qds_mdio_name_for_muxval(muxval); |
| |
| if (!name) { |
| printf("No bus for muxval %x\n", muxval); |
| return NULL; |
| } |
| |
| bus = miiphy_get_dev_by_name(name); |
| |
| if (!bus) { |
| printf("No bus by name %s\n", name); |
| return NULL; |
| } |
| |
| return bus; |
| } |
| |
| struct t4240qds_mdio { |
| u8 muxval; |
| struct mii_dev *realbus; |
| }; |
| |
| static void t4240qds_mux_mdio(u8 muxval) |
| { |
| u8 brdcfg4; |
| if ((muxval < 6) || (muxval == 7)) { |
| brdcfg4 = QIXIS_READ(brdcfg[4]); |
| brdcfg4 &= ~BRDCFG4_EMISEL_MASK; |
| brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); |
| QIXIS_WRITE(brdcfg[4], brdcfg4); |
| } |
| } |
| |
| static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad, |
| int regnum) |
| { |
| struct t4240qds_mdio *priv = bus->priv; |
| |
| t4240qds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->read(priv->realbus, addr, devad, regnum); |
| } |
| |
| static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad, |
| int regnum, u16 value) |
| { |
| struct t4240qds_mdio *priv = bus->priv; |
| |
| t4240qds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->write(priv->realbus, addr, devad, regnum, value); |
| } |
| |
| static int t4240qds_mdio_reset(struct mii_dev *bus) |
| { |
| struct t4240qds_mdio *priv = bus->priv; |
| |
| return priv->realbus->reset(priv->realbus); |
| } |
| |
| static int t4240qds_mdio_init(char *realbusname, u8 muxval) |
| { |
| struct t4240qds_mdio *pmdio; |
| struct mii_dev *bus = mdio_alloc(); |
| |
| if (!bus) { |
| printf("Failed to allocate T4240QDS MDIO bus\n"); |
| return -1; |
| } |
| |
| pmdio = malloc(sizeof(*pmdio)); |
| if (!pmdio) { |
| printf("Failed to allocate T4240QDS private data\n"); |
| free(bus); |
| return -1; |
| } |
| |
| bus->read = t4240qds_mdio_read; |
| bus->write = t4240qds_mdio_write; |
| bus->reset = t4240qds_mdio_reset; |
| strcpy(bus->name, t4240qds_mdio_name_for_muxval(muxval)); |
| |
| pmdio->realbus = miiphy_get_dev_by_name(realbusname); |
| |
| if (!pmdio->realbus) { |
| printf("No bus with name %s\n", realbusname); |
| free(bus); |
| free(pmdio); |
| return -1; |
| } |
| |
| pmdio->muxval = muxval; |
| bus->priv = pmdio; |
| |
| return mdio_register(bus); |
| } |
| |
| void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, |
| enum fm_port port, int offset) |
| { |
| int interface = fm_info_get_enet_if(port); |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; |
| |
| prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; |
| |
| if (interface == PHY_INTERFACE_MODE_SGMII || |
| interface == PHY_INTERFACE_MODE_QSGMII) { |
| switch (port) { |
| case FM1_DTSEC1: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy21"); |
| break; |
| case FM1_DTSEC2: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy22"); |
| break; |
| case FM1_DTSEC3: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy23"); |
| break; |
| case FM1_DTSEC4: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy24"); |
| break; |
| case FM1_DTSEC6: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy12"); |
| break; |
| case FM1_DTSEC9: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy14"); |
| else |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_sgmii4"); |
| break; |
| case FM1_DTSEC10: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy13"); |
| else |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_sgmii3"); |
| break; |
| case FM2_DTSEC1: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy41"); |
| break; |
| case FM2_DTSEC2: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy42"); |
| break; |
| case FM2_DTSEC3: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy43"); |
| break; |
| case FM2_DTSEC4: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy44"); |
| break; |
| case FM2_DTSEC6: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy32"); |
| break; |
| case FM2_DTSEC9: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy34"); |
| else |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_sgmii12"); |
| break; |
| case FM2_DTSEC10: |
| if (qsgmiiphy_fix[port]) |
| fdt_set_phy_handle(blob, prop, pa, |
| "sgmii_phy33"); |
| else |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_sgmii11"); |
| break; |
| default: |
| break; |
| } |
| } else if (interface == PHY_INTERFACE_MODE_XGMII && |
| ((prtcl2 == 55) || (prtcl2 == 57))) { |
| /* |
| * if the 10G is XFI, check hwconfig to see what is the |
| * media type, there are two types, fiber or copper, |
| * fix the dtb accordingly. |
| */ |
| int media_type = 0; |
| struct fixed_link f_link; |
| char lane_mode[20] = {"10GBASE-KR"}; |
| char buf[32] = "serdes-2,"; |
| int off; |
| |
| switch (port) { |
| case FM1_10GEC1: |
| if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g1")) { |
| media_type = 1; |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_xfi1"); |
| sprintf(buf, "%s%s%s", buf, "lane-a,", |
| (char *)lane_mode); |
| } |
| break; |
| case FM1_10GEC2: |
| if (hwconfig_sub("fsl_10gkr_copper", "fm1_10g2")) { |
| media_type = 1; |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_xfi2"); |
| sprintf(buf, "%s%s%s", buf, "lane-b,", |
| (char *)lane_mode); |
| } |
| break; |
| case FM2_10GEC1: |
| if (hwconfig_sub("fsl_10gkr_copper", "fm2_10g1")) { |
| media_type = 1; |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_xfi3"); |
| sprintf(buf, "%s%s%s", buf, "lane-d,", |
| (char *)lane_mode); |
| } |
| break; |
| case FM2_10GEC2: |
| if (hwconfig_sub("fsl_10gkr_copper", "fm2_10g2")) { |
| media_type = 1; |
| fdt_set_phy_handle(blob, prop, pa, |
| "phy_xfi4"); |
| sprintf(buf, "%s%s%s", buf, "lane-c,", |
| (char *)lane_mode); |
| } |
| break; |
| default: |
| return; |
| } |
| |
| if (!media_type) { |
| /* fixed-link is used for XFI fiber cable */ |
| fdt_delprop(blob, offset, "phy-handle"); |
| f_link.phy_id = port; |
| f_link.duplex = 1; |
| f_link.link_speed = 10000; |
| f_link.pause = 0; |
| f_link.asym_pause = 0; |
| fdt_setprop(blob, offset, "fixed-link", &f_link, |
| sizeof(f_link)); |
| } else { |
| /* set property for copper cable */ |
| off = fdt_node_offset_by_compat_reg(blob, |
| "fsl,fman-memac-mdio", pa + 0x1000); |
| fdt_setprop_string(blob, off, "lane-instance", buf); |
| } |
| } |
| } |
| |
| void fdt_fixup_board_enet(void *fdt) |
| { |
| int i; |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; |
| |
| prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; |
| for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_SGMII: |
| case PHY_INTERFACE_MODE_QSGMII: |
| switch (mdio_mux[i]) { |
| case EMI1_SLOT1: |
| fdt_status_okay_by_alias(fdt, "emi1_slot1"); |
| break; |
| case EMI1_SLOT2: |
| fdt_status_okay_by_alias(fdt, "emi1_slot2"); |
| break; |
| case EMI1_SLOT3: |
| fdt_status_okay_by_alias(fdt, "emi1_slot3"); |
| break; |
| case EMI1_SLOT4: |
| fdt_status_okay_by_alias(fdt, "emi1_slot4"); |
| break; |
| default: |
| break; |
| } |
| break; |
| case PHY_INTERFACE_MODE_XGMII: |
| /* check if it's XFI interface for 10g */ |
| if ((prtcl2 == 55) || (prtcl2 == 57)) { |
| if (i == FM1_10GEC1 && hwconfig_sub( |
| "fsl_10gkr_copper", "fm1_10g1")) |
| fdt_status_okay_by_alias( |
| fdt, "xfi_pcs_mdio1"); |
| if (i == FM1_10GEC2 && hwconfig_sub( |
| "fsl_10gkr_copper", "fm1_10g2")) |
| fdt_status_okay_by_alias( |
| fdt, "xfi_pcs_mdio2"); |
| if (i == FM2_10GEC1 && hwconfig_sub( |
| "fsl_10gkr_copper", "fm2_10g1")) |
| fdt_status_okay_by_alias( |
| fdt, "xfi_pcs_mdio3"); |
| if (i == FM2_10GEC2 && hwconfig_sub( |
| "fsl_10gkr_copper", "fm2_10g2")) |
| fdt_status_okay_by_alias( |
| fdt, "xfi_pcs_mdio4"); |
| break; |
| } |
| switch (i) { |
| case FM1_10GEC1: |
| fdt_status_okay_by_alias(fdt, "emi2_xauislot1"); |
| break; |
| case FM1_10GEC2: |
| fdt_status_okay_by_alias(fdt, "emi2_xauislot2"); |
| break; |
| case FM2_10GEC1: |
| fdt_status_okay_by_alias(fdt, "emi2_xauislot3"); |
| break; |
| case FM2_10GEC2: |
| fdt_status_okay_by_alias(fdt, "emi2_xauislot4"); |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void initialize_qsgmiiphy_fix(void) |
| { |
| int i; |
| unsigned short reg; |
| |
| for (i = 1; i <= 4; i++) { |
| /* |
| * Try to read if a SGMII card is used, we do it slot by slot. |
| * if a SGMII PHY address is valid on a slot, then we mark |
| * all ports on the slot, then fix the PHY address for the |
| * marked port when doing dtb fixup. |
| */ |
| if (miiphy_read(mdio_names[i], |
| SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, ®) != 0) { |
| debug("Slot%d PHY ID register 2 read failed\n", i); |
| continue; |
| } |
| |
| debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg); |
| |
| if (reg == 0xFFFF) { |
| /* No physical device present at this address */ |
| continue; |
| } |
| |
| switch (i) { |
| case 1: |
| qsgmiiphy_fix[FM1_DTSEC5] = 1; |
| qsgmiiphy_fix[FM1_DTSEC6] = 1; |
| qsgmiiphy_fix[FM1_DTSEC9] = 1; |
| qsgmiiphy_fix[FM1_DTSEC10] = 1; |
| slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR; |
| slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR; |
| slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR; |
| slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR; |
| break; |
| case 2: |
| qsgmiiphy_fix[FM1_DTSEC1] = 1; |
| qsgmiiphy_fix[FM1_DTSEC2] = 1; |
| qsgmiiphy_fix[FM1_DTSEC3] = 1; |
| qsgmiiphy_fix[FM1_DTSEC4] = 1; |
| slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR; |
| slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR; |
| slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR; |
| slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR; |
| break; |
| case 3: |
| qsgmiiphy_fix[FM2_DTSEC5] = 1; |
| qsgmiiphy_fix[FM2_DTSEC6] = 1; |
| qsgmiiphy_fix[FM2_DTSEC9] = 1; |
| qsgmiiphy_fix[FM2_DTSEC10] = 1; |
| slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR; |
| slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR; |
| slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR; |
| slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR; |
| break; |
| case 4: |
| qsgmiiphy_fix[FM2_DTSEC1] = 1; |
| qsgmiiphy_fix[FM2_DTSEC2] = 1; |
| qsgmiiphy_fix[FM2_DTSEC3] = 1; |
| qsgmiiphy_fix[FM2_DTSEC4] = 1; |
| slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR; |
| slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR; |
| slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR; |
| slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| #if defined(CONFIG_FMAN_ENET) |
| int i, idx, lane, slot, interface; |
| struct memac_mdio_info dtsec_mdio_info; |
| struct memac_mdio_info tgec_mdio_info; |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 srds_prtcl_s1, srds_prtcl_s2; |
| |
| srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS1_PRTCL; |
| srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS2_PRTCL; |
| srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; |
| |
| /* Initialize the mdio_mux array so we can recognize empty elements */ |
| for (i = 0; i < NUM_FM_PORTS; i++) |
| mdio_mux[i] = EMI_NONE; |
| |
| dtsec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR; |
| |
| dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |
| |
| /* Register the 1G MDIO bus */ |
| fm_memac_mdio_init(bis, &dtsec_mdio_info); |
| |
| tgec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR; |
| tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; |
| |
| /* Register the 10G MDIO bus */ |
| fm_memac_mdio_init(bis, &tgec_mdio_info); |
| |
| /* Register the muxing front-ends to the MDIO buses */ |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); |
| t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); |
| t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); |
| |
| initialize_qsgmiiphy_fix(); |
| |
| switch (srds_prtcl_s1) { |
| case 1: |
| case 2: |
| case 4: |
| /* XAUI/HiGig in Slot1 and Slot2 */ |
| fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); |
| break; |
| case 27: |
| case 28: |
| case 35: |
| case 36: |
| /* SGMII in Slot1 and Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); |
| fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); |
| fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); |
| fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); |
| fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); |
| fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); |
| if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) { |
| fm_info_set_phy_address(FM1_DTSEC9, |
| slot_qsgmii_phyaddr[1][3]); |
| fm_info_set_phy_address(FM1_DTSEC10, |
| slot_qsgmii_phyaddr[1][2]); |
| } |
| break; |
| case 37: |
| case 38: |
| fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); |
| fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); |
| fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); |
| fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); |
| fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); |
| fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); |
| if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) { |
| fm_info_set_phy_address(FM1_DTSEC9, |
| slot_qsgmii_phyaddr[1][2]); |
| fm_info_set_phy_address(FM1_DTSEC10, |
| slot_qsgmii_phyaddr[1][3]); |
| } |
| break; |
| case 39: |
| case 40: |
| case 45: |
| case 46: |
| case 47: |
| case 48: |
| fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); |
| fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); |
| if ((srds_prtcl_s2 != 55) && (srds_prtcl_s2 != 57)) { |
| fm_info_set_phy_address(FM1_DTSEC10, |
| slot_qsgmii_phyaddr[1][2]); |
| fm_info_set_phy_address(FM1_DTSEC9, |
| slot_qsgmii_phyaddr[1][3]); |
| } |
| fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); |
| fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); |
| fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); |
| fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); |
| break; |
| default: |
| puts("Invalid SerDes1 protocol for T4240QDS\n"); |
| break; |
| } |
| |
| for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { |
| idx = i - FM1_DTSEC1; |
| interface = fm_info_get_enet_if(i); |
| switch (interface) { |
| case PHY_INTERFACE_MODE_SGMII: |
| case PHY_INTERFACE_MODE_QSGMII: |
| if (interface == PHY_INTERFACE_MODE_QSGMII) { |
| if (idx <= 3) |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| QSGMII_FM1_A); |
| else |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| QSGMII_FM1_B); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm1[lane]; |
| debug("FM1@DTSEC%u expects QSGMII in slot %u\n", |
| idx + 1, slot); |
| } else { |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| SGMII_FM1_DTSEC1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm1[lane]; |
| debug("FM1@DTSEC%u expects SGMII in slot %u\n", |
| idx + 1, slot); |
| } |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| switch (slot) { |
| case 1: |
| mdio_mux[i] = EMI1_SLOT1; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 2: |
| mdio_mux[i] = EMI1_SLOT2; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| /* FM1 DTSEC5 routes to RGMII with EC2 */ |
| debug("FM1@DTSEC%u is RGMII at address %u\n", |
| idx + 1, 2); |
| if (i == FM1_DTSEC5) |
| fm_info_set_phy_address(i, 2); |
| mdio_mux[i] = EMI1_RGMII; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { |
| idx = i - FM1_10GEC1; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_XGMII: |
| if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { |
| /* A fake PHY address to make U-boot happy */ |
| fm_info_set_phy_address(i, i); |
| } else { |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| XAUI_FM1_MAC9 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm1[lane]; |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| } |
| mdio_mux[i] = EMI2; |
| fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| #if (CONFIG_SYS_NUM_FMAN == 2) |
| switch (srds_prtcl_s2) { |
| case 1: |
| case 2: |
| case 4: |
| /* XAUI/HiGig in Slot3 and Slot4 */ |
| fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); |
| break; |
| case 6: |
| case 7: |
| case 12: |
| case 13: |
| case 14: |
| case 15: |
| case 16: |
| case 21: |
| case 22: |
| case 23: |
| case 24: |
| case 25: |
| case 26: |
| /* XAUI/HiGig in Slot3, SGMII in Slot4 */ |
| fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| break; |
| case 27: |
| case 28: |
| case 35: |
| case 36: |
| /* SGMII in Slot3 and Slot4 */ |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); |
| fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); |
| fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); |
| fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); |
| break; |
| case 37: |
| case 38: |
| /* QSGMII in Slot3 and Slot4 */ |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); |
| fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); |
| fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]); |
| fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]); |
| break; |
| case 39: |
| case 40: |
| case 45: |
| case 46: |
| case 47: |
| case 48: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); |
| fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); |
| fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); |
| fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); |
| /* QSGMII in Slot4 */ |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| break; |
| case 49: |
| case 50: |
| case 51: |
| case 52: |
| case 53: |
| case 54: |
| fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| break; |
| case 55: |
| case 57: |
| /* XFI in Slot3, SGMII in Slot4 */ |
| fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); |
| fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); |
| fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); |
| fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); |
| break; |
| default: |
| puts("Invalid SerDes2 protocol for T4240QDS\n"); |
| break; |
| } |
| |
| for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { |
| idx = i - FM2_DTSEC1; |
| interface = fm_info_get_enet_if(i); |
| switch (interface) { |
| case PHY_INTERFACE_MODE_SGMII: |
| case PHY_INTERFACE_MODE_QSGMII: |
| if (interface == PHY_INTERFACE_MODE_QSGMII) { |
| if (idx <= 3) |
| lane = serdes_get_first_lane(FSL_SRDS_2, |
| QSGMII_FM2_A); |
| else |
| lane = serdes_get_first_lane(FSL_SRDS_2, |
| QSGMII_FM2_B); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm2[lane]; |
| debug("FM2@DTSEC%u expects QSGMII in slot %u\n", |
| idx + 1, slot); |
| } else { |
| lane = serdes_get_first_lane(FSL_SRDS_2, |
| SGMII_FM2_DTSEC1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm2[lane]; |
| debug("FM2@DTSEC%u expects SGMII in slot %u\n", |
| idx + 1, slot); |
| } |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| switch (slot) { |
| case 3: |
| mdio_mux[i] = EMI1_SLOT3; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| case 4: |
| mdio_mux[i] = EMI1_SLOT4; |
| fm_info_set_mdio(i, |
| mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| }; |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| /* |
| * If DTSEC5 is RGMII, then it's routed via via EC1 to |
| * the first on-board RGMII port. If DTSEC6 is RGMII, |
| * then it's routed via via EC2 to the second on-board |
| * RGMII port. |
| */ |
| debug("FM2@DTSEC%u is RGMII at address %u\n", |
| idx + 1, i == FM2_DTSEC5 ? 1 : 2); |
| fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2); |
| mdio_mux[i] = EMI1_RGMII; |
| fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { |
| idx = i - FM2_10GEC1; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_XGMII: |
| if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { |
| /* A fake PHY address to make U-boot happy */ |
| fm_info_set_phy_address(i, i); |
| } else { |
| lane = serdes_get_first_lane(FSL_SRDS_2, |
| XAUI_FM2_MAC9 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot_fsm2[lane]; |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| } |
| mdio_mux[i] = EMI2; |
| fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| #endif /* CONFIG_SYS_NUM_FMAN */ |
| |
| cpu_eth_init(bis); |
| #endif /* CONFIG_FMAN_ENET */ |
| |
| return pci_eth_init(bis); |
| } |