| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* Tegra20 high-level function multiplexing */ |
| #include <common.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/funcmux.h> |
| #include <asm/arch/pinmux.h> |
| |
| /* |
| * The PINMUX macro is used to set up pinmux tables. |
| */ |
| #define PINMUX(grp, mux, pupd, tri) \ |
| {PMUX_PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri} |
| |
| static const struct pmux_pingrp_config disp1_default[] = { |
| PINMUX(LDI, DISPA, NORMAL, NORMAL), |
| PINMUX(LHP0, DISPA, NORMAL, NORMAL), |
| PINMUX(LHP1, DISPA, NORMAL, NORMAL), |
| PINMUX(LHP2, DISPA, NORMAL, NORMAL), |
| PINMUX(LHS, DISPA, NORMAL, NORMAL), |
| PINMUX(LM0, RSVD4, NORMAL, NORMAL), |
| PINMUX(LPP, DISPA, NORMAL, NORMAL), |
| PINMUX(LPW0, DISPA, NORMAL, NORMAL), |
| PINMUX(LPW2, DISPA, NORMAL, NORMAL), |
| PINMUX(LSC0, DISPA, NORMAL, NORMAL), |
| PINMUX(LSPI, DISPA, NORMAL, NORMAL), |
| PINMUX(LVP1, DISPA, NORMAL, NORMAL), |
| PINMUX(LVS, DISPA, NORMAL, NORMAL), |
| PINMUX(SLXD, SPDIF, NORMAL, NORMAL), |
| }; |
| |
| |
| int funcmux_select(enum periph_id id, int config) |
| { |
| int bad_config = config != FUNCMUX_DEFAULT; |
| |
| switch (id) { |
| case PERIPH_ID_UART1: |
| switch (config) { |
| case FUNCMUX_UART1_IRRX_IRTX: |
| pinmux_set_func(PMUX_PINGRP_IRRX, PMUX_FUNC_UARTA); |
| pinmux_set_func(PMUX_PINGRP_IRTX, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PMUX_PINGRP_IRRX); |
| pinmux_tristate_disable(PMUX_PINGRP_IRTX); |
| break; |
| case FUNCMUX_UART1_UAA_UAB: |
| pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_UARTA); |
| pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PMUX_PINGRP_UAA); |
| pinmux_tristate_disable(PMUX_PINGRP_UAB); |
| bad_config = 0; |
| break; |
| case FUNCMUX_UART1_GPU: |
| pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PMUX_PINGRP_GPU); |
| bad_config = 0; |
| break; |
| case FUNCMUX_UART1_SDIO1: |
| pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_UARTA); |
| pinmux_tristate_disable(PMUX_PINGRP_SDIO1); |
| bad_config = 0; |
| break; |
| } |
| if (!bad_config) { |
| /* |
| * Tegra appears to boot with function UARTA pre- |
| * selected on mux group SDB. If two mux groups are |
| * both set to the same function, it's unclear which |
| * group's pins drive the RX signals into the HW. |
| * For UARTA, SDB certainly overrides group IRTX in |
| * practice. To solve this, configure some alternative |
| * function on SDB to avoid the conflict. Also, tri- |
| * state the group to avoid driving any signal onto it |
| * until we know what's connected. |
| */ |
| pinmux_tristate_enable(PMUX_PINGRP_SDB); |
| pinmux_set_func(PMUX_PINGRP_SDB, PMUX_FUNC_SDIO3); |
| } |
| break; |
| |
| case PERIPH_ID_UART2: |
| if (config == FUNCMUX_UART2_UAD) { |
| pinmux_set_func(PMUX_PINGRP_UAD, PMUX_FUNC_UARTB); |
| pinmux_tristate_disable(PMUX_PINGRP_UAD); |
| } |
| break; |
| |
| case PERIPH_ID_UART4: |
| if (config == FUNCMUX_UART4_GMC) { |
| pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_UARTD); |
| pinmux_tristate_disable(PMUX_PINGRP_GMC); |
| } |
| break; |
| |
| case PERIPH_ID_DVC_I2C: |
| /* there is only one selection, pinmux_config is ignored */ |
| if (config == FUNCMUX_DVC_I2CP) { |
| pinmux_set_func(PMUX_PINGRP_I2CP, PMUX_FUNC_I2C); |
| pinmux_tristate_disable(PMUX_PINGRP_I2CP); |
| } |
| break; |
| |
| case PERIPH_ID_I2C1: |
| /* support pinmux_config of 0 for now, */ |
| if (config == FUNCMUX_I2C1_RM) { |
| pinmux_set_func(PMUX_PINGRP_RM, PMUX_FUNC_I2C); |
| pinmux_tristate_disable(PMUX_PINGRP_RM); |
| } |
| break; |
| case PERIPH_ID_I2C2: /* I2C2 */ |
| switch (config) { |
| case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */ |
| pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_I2C2); |
| /* PTA to HDMI */ |
| pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_HDMI); |
| pinmux_tristate_disable(PMUX_PINGRP_DDC); |
| break; |
| case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */ |
| pinmux_set_func(PMUX_PINGRP_PTA, PMUX_FUNC_I2C2); |
| /* set DDC_SEL to RSVDx (RSVD2 works for now) */ |
| pinmux_set_func(PMUX_PINGRP_DDC, PMUX_FUNC_RSVD2); |
| pinmux_tristate_disable(PMUX_PINGRP_PTA); |
| bad_config = 0; |
| break; |
| } |
| break; |
| case PERIPH_ID_I2C3: /* I2C3 */ |
| /* support pinmux_config of 0 for now */ |
| if (config == FUNCMUX_I2C3_DTF) { |
| pinmux_set_func(PMUX_PINGRP_DTF, PMUX_FUNC_I2C3); |
| pinmux_tristate_disable(PMUX_PINGRP_DTF); |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC1: |
| if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) { |
| pinmux_set_func(PMUX_PINGRP_SDIO1, PMUX_FUNC_SDIO1); |
| pinmux_tristate_disable(PMUX_PINGRP_SDIO1); |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC2: |
| if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) { |
| pinmux_set_func(PMUX_PINGRP_DTA, PMUX_FUNC_SDIO2); |
| pinmux_set_func(PMUX_PINGRP_DTD, PMUX_FUNC_SDIO2); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_DTA); |
| pinmux_tristate_disable(PMUX_PINGRP_DTD); |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC3: |
| switch (config) { |
| case FUNCMUX_SDMMC3_SDB_SLXA_8BIT: |
| pinmux_set_func(PMUX_PINGRP_SLXA, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PMUX_PINGRP_SLXC, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PMUX_PINGRP_SLXD, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PMUX_PINGRP_SLXK, PMUX_FUNC_SDIO3); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_SLXA); |
| pinmux_tristate_disable(PMUX_PINGRP_SLXC); |
| pinmux_tristate_disable(PMUX_PINGRP_SLXD); |
| pinmux_tristate_disable(PMUX_PINGRP_SLXK); |
| /* fall through */ |
| |
| case FUNCMUX_SDMMC3_SDB_4BIT: |
| pinmux_set_func(PMUX_PINGRP_SDB, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PMUX_PINGRP_SDC, PMUX_FUNC_SDIO3); |
| pinmux_set_func(PMUX_PINGRP_SDD, PMUX_FUNC_SDIO3); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_SDB); |
| pinmux_tristate_disable(PMUX_PINGRP_SDC); |
| pinmux_tristate_disable(PMUX_PINGRP_SDD); |
| bad_config = 0; |
| break; |
| } |
| break; |
| |
| case PERIPH_ID_SDMMC4: |
| switch (config) { |
| case FUNCMUX_SDMMC4_ATC_ATD_8BIT: |
| pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_SDIO4); |
| pinmux_set_func(PMUX_PINGRP_ATD, PMUX_FUNC_SDIO4); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_ATC); |
| pinmux_tristate_disable(PMUX_PINGRP_ATD); |
| break; |
| |
| case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT: |
| pinmux_set_func(PMUX_PINGRP_GME, PMUX_FUNC_SDIO4); |
| pinmux_tristate_disable(PMUX_PINGRP_GME); |
| /* fall through */ |
| |
| case FUNCMUX_SDMMC4_ATB_GMA_4_BIT: |
| pinmux_set_func(PMUX_PINGRP_ATB, PMUX_FUNC_SDIO4); |
| pinmux_set_func(PMUX_PINGRP_GMA, PMUX_FUNC_SDIO4); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_ATB); |
| pinmux_tristate_disable(PMUX_PINGRP_GMA); |
| bad_config = 0; |
| break; |
| } |
| break; |
| |
| case PERIPH_ID_KBC: |
| if (config == FUNCMUX_DEFAULT) { |
| enum pmux_pingrp grp[] = {PMUX_PINGRP_KBCA, |
| PMUX_PINGRP_KBCB, PMUX_PINGRP_KBCC, |
| PMUX_PINGRP_KBCD, PMUX_PINGRP_KBCE, |
| PMUX_PINGRP_KBCF}; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(grp); i++) { |
| pinmux_tristate_disable(grp[i]); |
| pinmux_set_func(grp[i], PMUX_FUNC_KBC); |
| pinmux_set_pullupdown(grp[i], PMUX_PULL_UP); |
| } |
| } |
| break; |
| |
| case PERIPH_ID_USB2: |
| if (config == FUNCMUX_USB2_ULPI) { |
| pinmux_set_func(PMUX_PINGRP_UAA, PMUX_FUNC_ULPI); |
| pinmux_set_func(PMUX_PINGRP_UAB, PMUX_FUNC_ULPI); |
| pinmux_set_func(PMUX_PINGRP_UDA, PMUX_FUNC_ULPI); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_UAA); |
| pinmux_tristate_disable(PMUX_PINGRP_UAB); |
| pinmux_tristate_disable(PMUX_PINGRP_UDA); |
| } |
| break; |
| |
| case PERIPH_ID_SPI1: |
| if (config == FUNCMUX_SPI1_GMC_GMD) { |
| pinmux_set_func(PMUX_PINGRP_GMC, PMUX_FUNC_SFLASH); |
| pinmux_set_func(PMUX_PINGRP_GMD, PMUX_FUNC_SFLASH); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_GMC); |
| pinmux_tristate_disable(PMUX_PINGRP_GMD); |
| } |
| break; |
| |
| case PERIPH_ID_NDFLASH: |
| switch (config) { |
| case FUNCMUX_NDFLASH_ATC: |
| pinmux_set_func(PMUX_PINGRP_ATC, PMUX_FUNC_NAND); |
| pinmux_tristate_disable(PMUX_PINGRP_ATC); |
| break; |
| case FUNCMUX_NDFLASH_KBC_8_BIT: |
| pinmux_set_func(PMUX_PINGRP_KBCA, PMUX_FUNC_NAND); |
| pinmux_set_func(PMUX_PINGRP_KBCC, PMUX_FUNC_NAND); |
| pinmux_set_func(PMUX_PINGRP_KBCD, PMUX_FUNC_NAND); |
| pinmux_set_func(PMUX_PINGRP_KBCE, PMUX_FUNC_NAND); |
| pinmux_set_func(PMUX_PINGRP_KBCF, PMUX_FUNC_NAND); |
| |
| pinmux_tristate_disable(PMUX_PINGRP_KBCA); |
| pinmux_tristate_disable(PMUX_PINGRP_KBCC); |
| pinmux_tristate_disable(PMUX_PINGRP_KBCD); |
| pinmux_tristate_disable(PMUX_PINGRP_KBCE); |
| pinmux_tristate_disable(PMUX_PINGRP_KBCF); |
| |
| bad_config = 0; |
| break; |
| } |
| break; |
| case PERIPH_ID_DISP1: |
| if (config == FUNCMUX_DEFAULT) { |
| int i; |
| |
| for (i = PMUX_PINGRP_LD0; i <= PMUX_PINGRP_LD17; i++) { |
| pinmux_set_func(i, PMUX_FUNC_DISPA); |
| pinmux_tristate_disable(i); |
| pinmux_set_pullupdown(i, PMUX_PULL_NORMAL); |
| } |
| pinmux_config_pingrp_table(disp1_default, |
| ARRAY_SIZE(disp1_default)); |
| } |
| break; |
| |
| default: |
| debug("%s: invalid periph_id %d", __func__, id); |
| return -1; |
| } |
| |
| if (bad_config) { |
| debug("%s: invalid config %d for periph_id %d", __func__, |
| config, id); |
| return -1; |
| } |
| |
| return 0; |
| } |