board/esd/pmc440/cmd_pmc440.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007-2008
  * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
  */
 #include <common.h>
 #include <command.h>
 #include <asm/io.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
 #if defined(CONFIG_LOGBUFFER)
 #include <logbuff.h>
 #endif

 #include "pmc440.h"

 int is_monarch(void);
 int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
 			   uchar *buffer, unsigned cnt);
 int eeprom_write_enable(unsigned dev_addr, int state);

 DECLARE_GLOBAL_DATA_PTR;

 #if defined(CONFIG_CMD_BSP)

 static int got_fifoirq;
 static int got_hcirq;

 int fpga_interrupt(u32 arg)
 {
 	pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
 	int rc = -1; /* not for us */
 	u32 status = FPGA_IN32(&fpga->status);

 	/* check for interrupt from fifo module */
 	if (status & STATUS_FIFO_ISF) {
 		/* disable this int source */
 		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
 		rc = 0;
 		got_fifoirq = 1; /* trigger backend */
 	}

 	if (status & STATUS_HOST_ISF) {
 		FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
 		rc = 0;
 		got_hcirq = 1;
 	}

 	return rc;
 }

 int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;

 	got_hcirq = 0;

 	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
 	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);

 	irq_install_handler(IRQ0_FPGA,
 			    (interrupt_handler_t *)fpga_interrupt,
 			    fpga);

 	FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);

 	while (!got_hcirq) {
 		/* Abort if ctrl-c was pressed */
 		if (ctrlc()) {
 			puts("\nAbort\n");
 			break;
 		}
 	}
 	if (got_hcirq)
 		printf("Got interrupt!\n");

 	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
 	irq_free_handler(IRQ0_FPGA);
 	return 0;
 }
 U_BOOT_CMD(
 	waithci,	1,	1,	do_waithci,
 	"Wait for host control interrupt",
 	""
 );

 void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
 {
 	u32 ctrl;

 	while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
 		printf("%5d  %d    %3d  %08x",
 		       (*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
 		       FPGA_IN32(&fpga->fifo[f].data));
 		if (ctrl & FIFO_OVERFLOW) {
 			printf(" OVERFLOW\n");
 			FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
 		} else
 			printf("\n");
 	}
 }

 int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
 	int i;
 	int n = 0;
 	u32 ctrl, data, f;
 	char str[] = "\\|/-";
 	int abort = 0;
 	int count = 0;
 	int count2 = 0;

 	switch (argc) {
 	case 1:
 		/* print all fifos status information */
 		printf("fifo level status\n");
 		printf("______________________________\n");
 		for (i=0; i<FIFO_COUNT; i++) {
 			ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
 			printf(" %d    %3d  %s%s%s %s\n",
 			       i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
 			       ctrl & FIFO_FULL ? "FULL     " : "",
 			       ctrl & FIFO_EMPTY ? "EMPTY    " : "",
 			       ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
 			       ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
 		}
 		break;

 	case 2:
 		/* completely read out fifo 'n' */
 		if (!strcmp(argv[1],"read")) {
 			printf("  #   fifo level data\n");
 			printf("______________________________\n");

 			for (i=0; i<FIFO_COUNT; i++)
 				dump_fifo(fpga, i, &n);

 		} else if (!strcmp(argv[1],"wait")) {
 			got_fifoirq = 0;

 			irq_install_handler(IRQ0_FPGA,
 					    (interrupt_handler_t *)fpga_interrupt,
 					    fpga);

 			printf("  #   fifo level data\n");
 			printf("______________________________\n");

 			/* enable all fifo interrupts */
 			FPGA_OUT32(&fpga->hostctrl,
 				   HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
 			for (i=0; i<FIFO_COUNT; i++) {
 				/* enable interrupts from all fifos */
 				FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
 			}

 			while (1) {
 				/* wait loop */
 				while (!got_fifoirq) {
 					count++;
 					if (!(count % 100)) {
 						count2++;
 						putc(0x08); /* backspace */
 						putc(str[count2 % 4]);
 					}

 					/* Abort if ctrl-c was pressed */
 					if ((abort = ctrlc())) {
 						puts("\nAbort\n");
 						break;
 					}
 					udelay(1000);
 				}
 				if (abort)
 					break;

 				/* simple fifo backend */
 				if (got_fifoirq) {
 					for (i=0; i<FIFO_COUNT; i++)
 						dump_fifo(fpga, i, &n);

 					got_fifoirq = 0;
 					/* unmask global fifo irq */
 					FPGA_OUT32(&fpga->hostctrl,
 						   HOSTCTRL_FIFOIE_GATE |
 						   HOSTCTRL_FIFOIE_FLAG);
 				}
 			}

 			/* disable all fifo interrupts */
 			FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
 			for (i=0; i<FIFO_COUNT; i++)
 				FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);

 			irq_free_handler(IRQ0_FPGA);

 		} else {
 			printf("Usage:\nfifo %s\n", cmdtp->help);
 			return 1;
 		}
 		break;

 	case 4:
 	case 5:
 		if (!strcmp(argv[1],"write")) {
 			/* get fifo number or fifo address */
 			f = simple_strtoul(argv[2], NULL, 16);

 			/* data paramter */
 			data = simple_strtoul(argv[3], NULL, 16);

 			/* get optional count parameter */
 			n = 1;
 			if (argc >= 5)
 				n = (int)simple_strtoul(argv[4], NULL, 10);

 			if (f < FIFO_COUNT) {
 				printf("writing %d x %08x to fifo %d\n",
 				       n, data, f);
 				for (i=0; i<n; i++)
 					FPGA_OUT32(&fpga->fifo[f].data, data);
 			} else {
 				printf("writing %d x %08x to fifo port at "
 				       "address %08x\n",
 				       n, data, f);
 				for (i=0; i<n; i++)
 					out_be32((void *)f, data);
 			}
 		} else {
 			printf("Usage:\nfifo %s\n", cmdtp->help);
 			return 1;
 		}
 		break;

 	default:
 		printf("Usage:\nfifo %s\n", cmdtp->help);
 		return 1;
 	}
 	return 0;
 }
 U_BOOT_CMD(
 	fifo,	5,	1,	do_fifo,
 	"Fifo module operations",
 	"wait\nfifo read\n"
 	"fifo write fifo(0..3) data [cnt=1]\n"
 	"fifo write address(>=4) data [cnt=1]\n"
 	"  - without arguments: print all fifo's status\n"
 	"  - with 'wait' argument: interrupt driven read from all fifos\n"
 	"  - with 'read' argument: read current contents from all fifos\n"
 	"  - with 'write' argument: write 'data' 'cnt' times to "
 	"'fifo' or 'address'"
 );

 int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong sdsdp[5];
 	ulong delay;
 	int count=16;

 	if (argc < 2) {
 		printf("Usage:\nsbe %s\n", cmdtp->help);
 		return -1;
 	}

 	if (argc > 1) {
 		if (!strcmp(argv[1], "400")) {
 			/* PLB=133MHz, PLB/PCI=3 */
 			printf("Bootstrapping for 400MHz\n");
 			sdsdp[0]=0x8678624e;
 			sdsdp[1]=0x095fa030;
 			sdsdp[2]=0x40082350;
 			sdsdp[3]=0x0d050000;
 		} else if (!strcmp(argv[1], "533")) {
 			/* PLB=133MHz, PLB/PCI=3 */
 			printf("Bootstrapping for 533MHz\n");
 			sdsdp[0]=0x87788252;
 			sdsdp[1]=0x095fa030;
 			sdsdp[2]=0x40082350;
 			sdsdp[3]=0x0d050000;
 		} else if (!strcmp(argv[1], "667")) {
 			/* PLB=133MHz, PLB/PCI=3 */
 			printf("Bootstrapping for 667MHz\n");
 			sdsdp[0]=0x8778a256;
 			sdsdp[1]=0x095fa030;
 			sdsdp[2]=0x40082350;
 			sdsdp[3]=0x0d050000;
 		} else {
 			printf("Usage:\nsbe %s\n", cmdtp->help);
 			return -1;
 		}
 	}

 	if (argc > 2) {
 		sdsdp[4] = 0;
 		if (argv[2][0]=='1')
 			sdsdp[4]=0x19750100;
 		else if (argv[2][0]=='0')
 			sdsdp[4]=0x19750000;
 		if (sdsdp[4])
 			count += 4;
 	}

 	if (argc > 3) {
 		delay = simple_strtoul(argv[3], NULL, 10);
 		if (delay > 20)
 			delay = 20;
 		sdsdp[4] |= delay;
 	}

 	printf("Writing boot EEPROM ...\n");
 	if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
 				   0, (uchar*)sdsdp, count) != 0)
 		printf("bootstrap_eeprom_write failed\n");
 	else
 		printf("done (dump via 'i2c md 52 0.1 14')\n");

 	return 0;
 }
 U_BOOT_CMD(
 	sbe, 4, 0, do_setup_bootstrap_eeprom,
 	"setup bootstrap eeprom",
 	"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
 );

 #if defined(CONFIG_PRAM)
 #include <environment.h>
 extern env_t *env_ptr;

 int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	u32 pram, nextbase, base;
 	char *v;
 	u32 param;
 	ulong *lptr;

 	v = getenv("pram");
 	if (v)
 		pram = simple_strtoul(v, NULL, 10);
 	else {
 		printf("Error: pram undefined. Please define pram in KiB\n");
 		return 1;
 	}

 	base = gd->bd->bi_memsize;
 #if defined(CONFIG_LOGBUFFER)
 	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
 #endif
 	/*
 	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
 	 */
 	param = base - (pram << 10);
 	printf("PARAM: @%08x\n", param);
 	debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);

 	/* clear entire PA ram */
 	memset((void*)param, 0, (pram << 10));

 	/* reserve 4k for pointer field */
 	nextbase = base - 4096;
 	lptr = (ulong*)(base);

 	/*
 	 * *(--lptr) = item_size;
 	 * *(--lptr) = base - item_base = distance from field top;
 	 */

 	/* env is first (4k aligned) */
 	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
 	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
 	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
 	*(--lptr) = base - nextbase;  /* offset | type=0 */

 	/* free section */
 	*(--lptr) = nextbase - param; /* size */
 	*(--lptr) = (base - param) | 126; /* offset | type=126 */

 	/* terminate pointer field */
 	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
 	*(--lptr) = 0;                /* offset=0 -> terminator */
 	return 0;
 }
 U_BOOT_CMD(
 	painit,	1,	1,	do_painit,
 	"prepare PciAccess system",
 	""
 );
 #endif /* CONFIG_PRAM */

 int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	in_be32((void*)CONFIG_SYS_RESET_BASE);
 	return 0;
 }
 U_BOOT_CMD(
 	selfreset,	1,	1,	do_selfreset,
 	"assert self-reset# signal",
 	""
 );

 int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;

 	/* requiers bootet FPGA and PLD_IOEN_N active */
 	if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
 		printf("Error: resetout requires a bootet FPGA\n");
 		return -1;
 	}

 	if (argc > 1) {
 		if (argv[1][0] == '0') {
 			/* assert */
 			printf("PMC-RESETOUT# asserted\n");
 			FPGA_OUT32(&fpga->hostctrl,
 				   HOSTCTRL_PMCRSTOUT_GATE);
 		} else {
 			/* deassert */
 			printf("PMC-RESETOUT# deasserted\n");
 			FPGA_OUT32(&fpga->hostctrl,
 				   HOSTCTRL_PMCRSTOUT_GATE |
 				   HOSTCTRL_PMCRSTOUT_FLAG);
 		}
 	} else {
 		printf("PMC-RESETOUT# is %s\n",
 		       FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
 		       "inactive" : "active");
 	}

 	return 0;
 }
 U_BOOT_CMD(
 	resetout,	2,	1,	do_resetout,
 	"assert PMC-RESETOUT# signal",
 	""
 );

 int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	if (is_monarch()) {
 		printf("This command is only supported in non-monarch mode\n");
 		return -1;
 	}

 	if (argc > 1) {
 		if (argv[1][0] == '0') {
 			/* assert */
 			printf("inta# asserted\n");
 			out_be32((void*)GPIO1_TCR,
 				 in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
 		} else {
 			/* deassert */
 			printf("inta# deasserted\n");
 			out_be32((void*)GPIO1_TCR,
 				 in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
 		}
 	} else {
 		printf("inta# is %s\n",
 		       in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
 		       "active" : "inactive");
 	}
 	return 0;
 }
 U_BOOT_CMD(
 	inta,	2,	1,	do_inta,
 	"Assert/Deassert or query INTA# state in non-monarch mode",
 	""
 );

 /* test-only */
 int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong pciaddr;

 	if (argc > 1) {
 		pciaddr = simple_strtoul(argv[1], NULL, 16);

 		pciaddr &= 0xf0000000;

 		/* map PCI address at 0xc0000000 in PLB space */

 		/* PMM1 Mask/Attribute - disabled b4 setting */
 		out32r(PCIX0_PMM1MA, 0x00000000);
 		/* PMM1 Local Address */
 		out32r(PCIX0_PMM1LA, 0xc0000000);
 		/* PMM1 PCI Low Address */
 		out32r(PCIX0_PMM1PCILA, pciaddr);
 		/* PMM1 PCI High Address */
 		out32r(PCIX0_PMM1PCIHA, 0x00000000);
 		/* 256MB + No prefetching, and enable region */
 		out32r(PCIX0_PMM1MA, 0xf0000001);
 	} else {
 		printf("Usage:\npmm %s\n", cmdtp->help);
 	}
 	return 0;
 }
 U_BOOT_CMD(
 	pmm,	2,	1,	do_pmm,
 	"Setup pmm[1] registers",
 	"<pciaddr> (pciaddr will be aligned to 256MB)"
 );

 #if defined(CONFIG_SYS_EEPROM_WREN)
 int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
 	int state = 0;

 	if (query) {
 		/* Query write access state. */
 		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
 			puts("Query of write access state failed.\n");
 		} else {
 			printf("Write access for device 0x%0x is %sabled.\n",
 			       CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
 		if ('0' == argv[1][0]) {
 			/* Disable write access. */
 			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
 		} else {
 			/* Enable write access. */
 			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
 		}
 		if (state < 0) {
 			puts("Setup of write access state failed.\n");
 		}
 	}

 	return state;
 }
 U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
 	"Enable / disable / query EEPROM write access",
 	""
 );
 #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

 #endif /* CONFIG_CMD_BSP */
	/*
	* (C) Copyright 2007-2008
	* Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*
	*/
	#include <common.h>
	#include <command.h>
	#include <asm/io.h>
	#include <asm/cache.h>
	#include <asm/processor.h>
	#if defined(CONFIG_LOGBUFFER)
	#include <logbuff.h>
	#endif

	#include "pmc440.h"

	int is_monarch(void);
	int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
	uchar *buffer, unsigned cnt);
	int eeprom_write_enable(unsigned dev_addr, int state);

	DECLARE_GLOBAL_DATA_PTR;

	#if defined(CONFIG_CMD_BSP)

	static int got_fifoirq;
	static int got_hcirq;

	int fpga_interrupt(u32 arg)
	{
	pmc440_fpga_t fpga = (pmc440_fpga_t )arg;
	int rc = -1; /* not for us */
	u32 status = FPGA_IN32(&fpga->status);

	/* check for interrupt from fifo module */
	if (status & STATUS_FIFO_ISF) {
	/* disable this int source */
	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
	rc = 0;
	got_fifoirq = 1; /* trigger backend */
	}

	if (status & STATUS_HOST_ISF) {
	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
	rc = 0;
	got_hcirq = 1;
	}

	return rc;
	}

	int do_waithci(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	pmc440_fpga_t fpga = (pmc440_fpga_t )FPGA_BA;

	got_hcirq = 0;

	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);

	irq_install_handler(IRQ0_FPGA,
	(interrupt_handler_t *)fpga_interrupt,
	fpga);

	FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);

	while (!got_hcirq) {
	/* Abort if ctrl-c was pressed */
	if (ctrlc()) {
	puts("\nAbort\n");
	break;
	}
	}
	if (got_hcirq)
	printf("Got interrupt!\n");

	FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
	irq_free_handler(IRQ0_FPGA);
	return 0;
	}
	U_BOOT_CMD(
	waithci, 1, 1, do_waithci,
	"Wait for host control interrupt",
	""
	);

	void dump_fifo(pmc440_fpga_t fpga, int f, int n)
	{
	u32 ctrl;

	while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
	printf("%5d %d %3d %08x",
	(*n)++, f, ctrl & (FIFO_LEVEL_MASK \| FIFO_FULL),
	FPGA_IN32(&fpga->fifo[f].data));
	if (ctrl & FIFO_OVERFLOW) {
	printf(" OVERFLOW\n");
	FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
	} else
	printf("\n");
	}
	}

	int do_fifo(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	pmc440_fpga_t fpga = (pmc440_fpga_t )FPGA_BA;
	int i;
	int n = 0;
	u32 ctrl, data, f;
	char str[] = "\\\|/-";
	int abort = 0;
	int count = 0;
	int count2 = 0;

	switch (argc) {
	case 1:
	/* print all fifos status information */
	printf("fifo level status\n");
	printf("______________________________\n");
	for (i=0; i<FIFO_COUNT; i++) {
	ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
	printf(" %d %3d %s%s%s %s\n",
	i, ctrl & (FIFO_LEVEL_MASK \| FIFO_FULL),
	ctrl & FIFO_FULL ? "FULL " : "",
	ctrl & FIFO_EMPTY ? "EMPTY " : "",
	ctrl & (FIFO_FULL\|FIFO_EMPTY) ? "" : "NOT EMPTY",
	ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
	}
	break;

	case 2:
	/* completely read out fifo 'n' */
	if (!strcmp(argv[1],"read")) {
	printf(" # fifo level data\n");
	printf("______________________________\n");

	for (i=0; i<FIFO_COUNT; i++)
	dump_fifo(fpga, i, &n);

	} else if (!strcmp(argv[1],"wait")) {
	got_fifoirq = 0;

	irq_install_handler(IRQ0_FPGA,
	(interrupt_handler_t *)fpga_interrupt,
	fpga);

	printf(" # fifo level data\n");
	printf("______________________________\n");

	/* enable all fifo interrupts */
	FPGA_OUT32(&fpga->hostctrl,
	HOSTCTRL_FIFOIE_GATE \| HOSTCTRL_FIFOIE_FLAG);
	for (i=0; i<FIFO_COUNT; i++) {
	/* enable interrupts from all fifos */
	FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
	}

	while (1) {
	/* wait loop */
	while (!got_fifoirq) {
	count++;
	if (!(count % 100)) {
	count2++;
	putc(0x08); /* backspace */
	putc(str[count2 % 4]);
	}

	/* Abort if ctrl-c was pressed */
	if ((abort = ctrlc())) {
	puts("\nAbort\n");
	break;
	}
	udelay(1000);
	}
	if (abort)
	break;

	/* simple fifo backend */
	if (got_fifoirq) {
	for (i=0; i<FIFO_COUNT; i++)
	dump_fifo(fpga, i, &n);

	got_fifoirq = 0;
	/* unmask global fifo irq */
	FPGA_OUT32(&fpga->hostctrl,
	HOSTCTRL_FIFOIE_GATE \|
	HOSTCTRL_FIFOIE_FLAG);
	}
	}

	/* disable all fifo interrupts */
	FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
	for (i=0; i<FIFO_COUNT; i++)
	FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);

	irq_free_handler(IRQ0_FPGA);

	} else {
	printf("Usage:\nfifo %s\n", cmdtp->help);
	return 1;
	}
	break;

	case 4:
	case 5:
	if (!strcmp(argv[1],"write")) {
	/* get fifo number or fifo address */
	f = simple_strtoul(argv[2], NULL, 16);

	/* data paramter */
	data = simple_strtoul(argv[3], NULL, 16);

	/* get optional count parameter */
	n = 1;
	if (argc >= 5)
	n = (int)simple_strtoul(argv[4], NULL, 10);

	if (f < FIFO_COUNT) {
	printf("writing %d x %08x to fifo %d\n",
	n, data, f);
	for (i=0; i<n; i++)
	FPGA_OUT32(&fpga->fifo[f].data, data);
	} else {
	printf("writing %d x %08x to fifo port at "
	"address %08x\n",
	n, data, f);
	for (i=0; i<n; i++)
	out_be32((void *)f, data);
	}
	} else {
	printf("Usage:\nfifo %s\n", cmdtp->help);
	return 1;
	}
	break;

	default:
	printf("Usage:\nfifo %s\n", cmdtp->help);
	return 1;
	}
	return 0;
	}
	U_BOOT_CMD(
	fifo, 5, 1, do_fifo,
	"Fifo module operations",
	"wait\nfifo read\n"
	"fifo write fifo(0..3) data [cnt=1]\n"
	"fifo write address(>=4) data [cnt=1]\n"
	" - without arguments: print all fifo's status\n"
	" - with 'wait' argument: interrupt driven read from all fifos\n"
	" - with 'read' argument: read current contents from all fifos\n"
	" - with 'write' argument: write 'data' 'cnt' times to "
	"'fifo' or 'address'"
	);

	int do_setup_bootstrap_eeprom(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	ulong sdsdp[5];
	ulong delay;
	int count=16;

	if (argc < 2) {
	printf("Usage:\nsbe %s\n", cmdtp->help);
	return -1;
	}

	if (argc > 1) {
	if (!strcmp(argv[1], "400")) {
	/* PLB=133MHz, PLB/PCI=3 */
	printf("Bootstrapping for 400MHz\n");
	sdsdp[0]=0x8678624e;
	sdsdp[1]=0x095fa030;
	sdsdp[2]=0x40082350;
	sdsdp[3]=0x0d050000;
	} else if (!strcmp(argv[1], "533")) {
	/* PLB=133MHz, PLB/PCI=3 */
	printf("Bootstrapping for 533MHz\n");
	sdsdp[0]=0x87788252;
	sdsdp[1]=0x095fa030;
	sdsdp[2]=0x40082350;
	sdsdp[3]=0x0d050000;
	} else if (!strcmp(argv[1], "667")) {
	/* PLB=133MHz, PLB/PCI=3 */
	printf("Bootstrapping for 667MHz\n");
	sdsdp[0]=0x8778a256;
	sdsdp[1]=0x095fa030;
	sdsdp[2]=0x40082350;
	sdsdp[3]=0x0d050000;
	} else {
	printf("Usage:\nsbe %s\n", cmdtp->help);
	return -1;
	}
	}

	if (argc > 2) {
	sdsdp[4] = 0;
	if (argv[2][0]=='1')
	sdsdp[4]=0x19750100;
	else if (argv[2][0]=='0')
	sdsdp[4]=0x19750000;
	if (sdsdp[4])
	count += 4;
	}

	if (argc > 3) {
	delay = simple_strtoul(argv[3], NULL, 10);
	if (delay > 20)
	delay = 20;
	sdsdp[4] \|= delay;
	}

	printf("Writing boot EEPROM ...\n");
	if (bootstrap_eeprom_write(CONFIG_SYS_I2C_BOOT_EEPROM_ADDR,
	0, (uchar*)sdsdp, count) != 0)
	printf("bootstrap_eeprom_write failed\n");
	else
	printf("done (dump via 'i2c md 52 0.1 14')\n");

	return 0;
	}
	U_BOOT_CMD(
	sbe, 4, 0, do_setup_bootstrap_eeprom,
	"setup bootstrap eeprom",
	"<cpufreq:400\|533\|667> [<console-uart:0\|1> [<bringup delay (0..20s)>]]"
	);

	#if defined(CONFIG_PRAM)
	#include <environment.h>
	extern env_t *env_ptr;

	int do_painit(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	u32 pram, nextbase, base;
	char *v;
	u32 param;
	ulong *lptr;

	v = getenv("pram");
	if (v)
	pram = simple_strtoul(v, NULL, 10);
	else {
	printf("Error: pram undefined. Please define pram in KiB\n");
	return 1;
	}

	base = gd->bd->bi_memsize;
	#if defined(CONFIG_LOGBUFFER)
	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
	#endif
	/*
	* gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MEM_TOP_HIDE
	*/
	param = base - (pram << 10);
	printf("PARAM: @%08x\n", param);
	debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);

	/* clear entire PA ram */
	memset((void*)param, 0, (pram << 10));

	/* reserve 4k for pointer field */
	nextbase = base - 4096;
	lptr = (ulong*)(base);

	/*
	* *(--lptr) = item_size;
	* *(--lptr) = base - item_base = distance from field top;
	*/

	/* env is first (4k aligned) */
	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
	(--lptr) = CONFIG_ENV_SIZE; / size */
	(--lptr) = base - nextbase; / offset \| type=0 */

	/* free section */
	(--lptr) = nextbase - param; / size */
	(--lptr) = (base - param) \| 126; / offset \| type=126 */

	/* terminate pointer field */
	(--lptr) = crc32(0, (void)(base - 0x10), 0x10);
	(--lptr) = 0; / offset=0 -> terminator */
	return 0;
	}
	U_BOOT_CMD(
	painit, 1, 1, do_painit,
	"prepare PciAccess system",
	""
	);
	#endif /* CONFIG_PRAM */

	int do_selfreset(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	in_be32((void*)CONFIG_SYS_RESET_BASE);
	return 0;
	}
	U_BOOT_CMD(
	selfreset, 1, 1, do_selfreset,
	"assert self-reset# signal",
	""
	);

	int do_resetout(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	pmc440_fpga_t fpga = (pmc440_fpga_t )FPGA_BA;

	/* requiers bootet FPGA and PLD_IOEN_N active */
	if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
	printf("Error: resetout requires a bootet FPGA\n");
	return -1;
	}

	if (argc > 1) {
	if (argv[1][0] == '0') {
	/* assert */
	printf("PMC-RESETOUT# asserted\n");
	FPGA_OUT32(&fpga->hostctrl,
	HOSTCTRL_PMCRSTOUT_GATE);
	} else {
	/* deassert */
	printf("PMC-RESETOUT# deasserted\n");
	FPGA_OUT32(&fpga->hostctrl,
	HOSTCTRL_PMCRSTOUT_GATE \|
	HOSTCTRL_PMCRSTOUT_FLAG);
	}
	} else {
	printf("PMC-RESETOUT# is %s\n",
	FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
	"inactive" : "active");
	}

	return 0;
	}
	U_BOOT_CMD(
	resetout, 2, 1, do_resetout,
	"assert PMC-RESETOUT# signal",
	""
	);

	int do_inta(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	if (is_monarch()) {
	printf("This command is only supported in non-monarch mode\n");
	return -1;
	}

	if (argc > 1) {
	if (argv[1][0] == '0') {
	/* assert */
	printf("inta# asserted\n");
	out_be32((void*)GPIO1_TCR,
	in_be32((void*)GPIO1_TCR) \| GPIO1_INTA_FAKE);
	} else {
	/* deassert */
	printf("inta# deasserted\n");
	out_be32((void*)GPIO1_TCR,
	in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
	}
	} else {
	printf("inta# is %s\n",
	in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
	"active" : "inactive");
	}
	return 0;
	}
	U_BOOT_CMD(
	inta, 2, 1, do_inta,
	"Assert/Deassert or query INTA# state in non-monarch mode",
	""
	);

	/* test-only */
	int do_pmm(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	ulong pciaddr;

	if (argc > 1) {
	pciaddr = simple_strtoul(argv[1], NULL, 16);

	pciaddr &= 0xf0000000;

	/* map PCI address at 0xc0000000 in PLB space */

	/* PMM1 Mask/Attribute - disabled b4 setting */
	out32r(PCIX0_PMM1MA, 0x00000000);
	/* PMM1 Local Address */
	out32r(PCIX0_PMM1LA, 0xc0000000);
	/* PMM1 PCI Low Address */
	out32r(PCIX0_PMM1PCILA, pciaddr);
	/* PMM1 PCI High Address */
	out32r(PCIX0_PMM1PCIHA, 0x00000000);
	/* 256MB + No prefetching, and enable region */
	out32r(PCIX0_PMM1MA, 0xf0000001);
	} else {
	printf("Usage:\npmm %s\n", cmdtp->help);
	}
	return 0;
	}
	U_BOOT_CMD(
	pmm, 2, 1, do_pmm,
	"Setup pmm[1] registers",
	"<pciaddr> (pciaddr will be aligned to 256MB)"
	);

	#if defined(CONFIG_SYS_EEPROM_WREN)
	int do_eep_wren(cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	int query = argc == 1;
	int state = 0;

	if (query) {
	/* Query write access state. */
	state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
	if (state < 0) {
	puts("Query of write access state failed.\n");
	} else {
	printf("Write access for device 0x%0x is %sabled.\n",
	CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
	state = 0;
	}
	} else {
	if ('0' == argv[1][0]) {
	/* Disable write access. */
	state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 0);
	} else {
	/* Enable write access. */
	state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, 1);
	}
	if (state < 0) {
	puts("Setup of write access state failed.\n");
	}
	}

	return state;
	}
	U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
	"Enable / disable / query EEPROM write access",
	""
	);
	#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

	#endif /* CONFIG_CMD_BSP */