| /* |
| * (C) Copyright 2011 |
| * eInfochips Ltd. <www.einfochips.com> |
| * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> |
| * |
| * (C) Copyright 2009 |
| * Marvell Semiconductor <www.marvell.com> |
| * Based on SSP driver |
| * Written-by: Lei Wen <leiwen@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi.h> |
| |
| #include <asm/io.h> |
| #include <asm/arch/spi.h> |
| #include <asm/gpio.h> |
| |
| #define to_armd_spi_slave(s) container_of(s, struct armd_spi_slave, slave) |
| |
| struct armd_spi_slave { |
| struct spi_slave slave; |
| struct ssp_reg *spi_reg; |
| u32 cr0, cr1; |
| u32 int_cr1; |
| u32 clear_sr; |
| const void *tx; |
| void *rx; |
| int gpio_cs_inverted; |
| }; |
| |
| static int spi_armd_write(struct armd_spi_slave *pss) |
| { |
| int wait_timeout = SSP_FLUSH_NUM; |
| while (--wait_timeout && !(readl(&pss->spi_reg->sssr) & SSSR_TNF)) |
| ; |
| if (!wait_timeout) { |
| debug("%s: timeout error\n", __func__); |
| return -1; |
| } |
| |
| if (pss->tx != NULL) { |
| writel(*(u8 *)pss->tx, &pss->spi_reg->ssdr); |
| ++pss->tx; |
| } else { |
| writel(0, &pss->spi_reg->ssdr); |
| } |
| return 0; |
| } |
| |
| static int spi_armd_read(struct armd_spi_slave *pss) |
| { |
| int wait_timeout = SSP_FLUSH_NUM; |
| while (--wait_timeout && !(readl(&pss->spi_reg->sssr) & SSSR_RNE)) |
| ; |
| if (!wait_timeout) { |
| debug("%s: timeout error\n", __func__); |
| return -1; |
| } |
| |
| if (pss->rx != NULL) { |
| *(u8 *)pss->rx = readl(&pss->spi_reg->ssdr); |
| ++pss->rx; |
| } else { |
| readl(&pss->spi_reg->ssdr); |
| } |
| return 0; |
| } |
| |
| static int spi_armd_flush(struct armd_spi_slave *pss) |
| { |
| unsigned long limit = SSP_FLUSH_NUM; |
| |
| do { |
| while (readl(&pss->spi_reg->sssr) & SSSR_RNE) |
| readl(&pss->spi_reg->ssdr); |
| } while ((readl(&pss->spi_reg->sssr) & SSSR_BSY) && limit--); |
| |
| writel(SSSR_ROR, &pss->spi_reg->sssr); |
| |
| return limit; |
| } |
| |
| void spi_cs_activate(struct spi_slave *slave) |
| { |
| struct armd_spi_slave *pss = to_armd_spi_slave(slave); |
| |
| gpio_set_value(slave->cs, pss->gpio_cs_inverted); |
| } |
| |
| void spi_cs_deactivate(struct spi_slave *slave) |
| { |
| struct armd_spi_slave *pss = to_armd_spi_slave(slave); |
| |
| gpio_set_value(slave->cs, !pss->gpio_cs_inverted); |
| } |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct armd_spi_slave *pss; |
| |
| pss = spi_alloc_slave(struct armd_spi_slave, bus, cs); |
| if (!pss) |
| return NULL; |
| |
| pss->spi_reg = (struct ssp_reg *)SSP_REG_BASE(CONFIG_SYS_SSP_PORT); |
| |
| pss->cr0 = SSCR0_MOTO | SSCR0_DATASIZE(DEFAULT_WORD_LEN) | SSCR0_SSE; |
| |
| pss->cr1 = (SSCR1_RXTRESH(RX_THRESH_DEF) & SSCR1_RFT) | |
| (SSCR1_TXTRESH(TX_THRESH_DEF) & SSCR1_TFT); |
| pss->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); |
| pss->cr1 |= (((mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) |
| | (((mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); |
| |
| pss->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; |
| pss->clear_sr = SSSR_ROR | SSSR_TINT; |
| |
| pss->gpio_cs_inverted = mode & SPI_CS_HIGH; |
| gpio_set_value(cs, !pss->gpio_cs_inverted); |
| |
| return &pss->slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| struct armd_spi_slave *pss = to_armd_spi_slave(slave); |
| |
| free(pss); |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| struct armd_spi_slave *pss = to_armd_spi_slave(slave); |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); |
| if (spi_armd_flush(pss) == 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| } |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, |
| void *din, unsigned long flags) |
| { |
| struct armd_spi_slave *pss = to_armd_spi_slave(slave); |
| uint bytes = bitlen / 8; |
| unsigned long limit; |
| int ret = 0; |
| |
| if (bitlen == 0) |
| goto done; |
| |
| /* we can only do 8 bit transfers */ |
| if (bitlen % 8) { |
| flags |= SPI_XFER_END; |
| goto done; |
| } |
| |
| pss->tx = dout; |
| pss->rx = din; |
| |
| if (flags & SPI_XFER_BEGIN) { |
| spi_cs_activate(slave); |
| writel(pss->cr1 | pss->int_cr1, &pss->spi_reg->sscr1); |
| writel(TIMEOUT_DEF, &pss->spi_reg->ssto); |
| writel(pss->cr0, &pss->spi_reg->sscr0); |
| } |
| |
| while (bytes--) { |
| limit = SSP_FLUSH_NUM; |
| ret = spi_armd_write(pss); |
| if (ret) |
| break; |
| |
| while ((readl(&pss->spi_reg->sssr) & SSSR_BSY) && limit--) |
| udelay(1); |
| |
| ret = spi_armd_read(pss); |
| if (ret) |
| break; |
| } |
| |
| done: |
| if (flags & SPI_XFER_END) { |
| /* Stop SSP */ |
| writel(pss->clear_sr, &pss->spi_reg->sssr); |
| clrbits_le32(&pss->spi_reg->sscr1, pss->int_cr1); |
| writel(0, &pss->spi_reg->ssto); |
| spi_cs_deactivate(slave); |
| } |
| |
| return ret; |
| } |