| /* |
| * Altera SPI driver |
| * |
| * based on bfin_spi.c |
| * Copyright (c) 2005-2008 Analog Devices Inc. |
| * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <fdtdec.h> |
| #include <spi.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define ALTERA_SPI_STATUS_RRDY_MSK BIT(7) |
| #define ALTERA_SPI_CONTROL_SSO_MSK BIT(10) |
| |
| #ifndef CONFIG_ALTERA_SPI_IDLE_VAL |
| #define CONFIG_ALTERA_SPI_IDLE_VAL 0xff |
| #endif |
| |
| struct altera_spi_regs { |
| u32 rxdata; |
| u32 txdata; |
| u32 status; |
| u32 control; |
| u32 _reserved; |
| u32 slave_sel; |
| }; |
| |
| struct altera_spi_platdata { |
| struct altera_spi_regs *regs; |
| }; |
| |
| struct altera_spi_priv { |
| struct altera_spi_regs *regs; |
| }; |
| |
| static void spi_cs_activate(struct udevice *dev, uint cs) |
| { |
| struct udevice *bus = dev->parent; |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| struct altera_spi_regs *const regs = priv->regs; |
| |
| writel(1 << cs, ®s->slave_sel); |
| writel(ALTERA_SPI_CONTROL_SSO_MSK, ®s->control); |
| } |
| |
| static void spi_cs_deactivate(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| struct altera_spi_regs *const regs = priv->regs; |
| |
| writel(0, ®s->control); |
| writel(0, ®s->slave_sel); |
| } |
| |
| static int altera_spi_claim_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| struct altera_spi_regs *const regs = priv->regs; |
| |
| writel(0, ®s->control); |
| writel(0, ®s->slave_sel); |
| |
| return 0; |
| } |
| |
| static int altera_spi_release_bus(struct udevice *dev) |
| { |
| struct udevice *bus = dev->parent; |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| struct altera_spi_regs *const regs = priv->regs; |
| |
| writel(0, ®s->slave_sel); |
| |
| return 0; |
| } |
| |
| static int altera_spi_xfer(struct udevice *dev, unsigned int bitlen, |
| const void *dout, void *din, unsigned long flags) |
| { |
| struct udevice *bus = dev->parent; |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| struct altera_spi_regs *const regs = priv->regs; |
| struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); |
| |
| /* assume spi core configured to do 8 bit transfers */ |
| unsigned int bytes = bitlen / 8; |
| const unsigned char *txp = dout; |
| unsigned char *rxp = din; |
| uint32_t reg, data, start; |
| |
| debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, |
| bus->seq, slave_plat->cs, bitlen, bytes, flags); |
| |
| if (bitlen == 0) |
| goto done; |
| |
| if (bitlen % 8) { |
| flags |= SPI_XFER_END; |
| goto done; |
| } |
| |
| /* empty read buffer */ |
| if (readl(®s->status) & ALTERA_SPI_STATUS_RRDY_MSK) |
| readl(®s->rxdata); |
| |
| if (flags & SPI_XFER_BEGIN) |
| spi_cs_activate(dev, slave_plat->cs); |
| |
| while (bytes--) { |
| if (txp) |
| data = *txp++; |
| else |
| data = CONFIG_ALTERA_SPI_IDLE_VAL; |
| |
| debug("%s: tx:%x ", __func__, data); |
| writel(data, ®s->txdata); |
| |
| start = get_timer(0); |
| while (1) { |
| reg = readl(®s->status); |
| if (reg & ALTERA_SPI_STATUS_RRDY_MSK) |
| break; |
| if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { |
| debug("%s: Transmission timed out!\n", __func__); |
| return -1; |
| } |
| } |
| |
| data = readl(®s->rxdata); |
| if (rxp) |
| *rxp++ = data & 0xff; |
| |
| debug("rx:%x\n", data); |
| } |
| |
| done: |
| if (flags & SPI_XFER_END) |
| spi_cs_deactivate(dev); |
| |
| return 0; |
| } |
| |
| static int altera_spi_set_speed(struct udevice *bus, uint speed) |
| { |
| return 0; |
| } |
| |
| static int altera_spi_set_mode(struct udevice *bus, uint mode) |
| { |
| return 0; |
| } |
| |
| static int altera_spi_probe(struct udevice *bus) |
| { |
| struct altera_spi_platdata *plat = dev_get_platdata(bus); |
| struct altera_spi_priv *priv = dev_get_priv(bus); |
| |
| priv->regs = plat->regs; |
| |
| return 0; |
| } |
| |
| static int altera_spi_ofdata_to_platdata(struct udevice *bus) |
| { |
| struct altera_spi_platdata *plat = dev_get_platdata(bus); |
| |
| plat->regs = map_physmem(dev_get_addr(bus), |
| sizeof(struct altera_spi_regs), |
| MAP_NOCACHE); |
| |
| return 0; |
| } |
| |
| static const struct dm_spi_ops altera_spi_ops = { |
| .claim_bus = altera_spi_claim_bus, |
| .release_bus = altera_spi_release_bus, |
| .xfer = altera_spi_xfer, |
| .set_speed = altera_spi_set_speed, |
| .set_mode = altera_spi_set_mode, |
| /* |
| * cs_info is not needed, since we require all chip selects to be |
| * in the device tree explicitly |
| */ |
| }; |
| |
| static const struct udevice_id altera_spi_ids[] = { |
| { .compatible = "altr,spi-1.0" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(altera_spi) = { |
| .name = "altera_spi", |
| .id = UCLASS_SPI, |
| .of_match = altera_spi_ids, |
| .ops = &altera_spi_ops, |
| .ofdata_to_platdata = altera_spi_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct altera_spi_platdata), |
| .priv_auto_alloc_size = sizeof(struct altera_spi_priv), |
| .probe = altera_spi_probe, |
| }; |