| /* |
| Ported to U-Boot by Christian Pellegrin <chri@ascensit.com> |
| |
| Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and |
| eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world |
| are GPL, so this is, of course, GPL. |
| |
| |
| ========================================================================== |
| |
| dev/dp83902a.h |
| |
| National Semiconductor DP83902a ethernet chip |
| |
| ========================================================================== |
| ####ECOSGPLCOPYRIGHTBEGIN#### |
| ------------------------------------------- |
| This file is part of eCos, the Embedded Configurable Operating System. |
| Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
| |
| eCos is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 2 or (at your option) any later version. |
| |
| eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License along |
| with eCos; if not, write to the Free Software Foundation, Inc., |
| 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| |
| As a special exception, if other files instantiate templates or use macros |
| or inline functions from this file, or you compile this file and link it |
| with other works to produce a work based on this file, this file does not |
| by itself cause the resulting work to be covered by the GNU General Public |
| License. However the source code for this file must still be made available |
| in accordance with section (3) of the GNU General Public License. |
| |
| This exception does not invalidate any other reasons why a work based on |
| this file might be covered by the GNU General Public License. |
| |
| Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
| at http://sources.redhat.com/ecos/ecos-license/ |
| ------------------------------------------- |
| ####ECOSGPLCOPYRIGHTEND#### |
| ####BSDCOPYRIGHTBEGIN#### |
| |
| ------------------------------------------- |
| |
| Portions of this software may have been derived from OpenBSD or other sources, |
| and are covered by the appropriate copyright disclaimers included herein. |
| |
| ------------------------------------------- |
| |
| ####BSDCOPYRIGHTEND#### |
| ========================================================================== |
| #####DESCRIPTIONBEGIN#### |
| |
| Author(s): gthomas |
| Contributors: gthomas, jskov |
| Date: 2001-06-13 |
| Purpose: |
| Description: |
| |
| ####DESCRIPTIONEND#### |
| |
| ========================================================================== |
| |
| */ |
| |
| /* |
| ------------------------------------------------------------------------ |
| Macros for accessing DP registers |
| These can be overridden by the platform header |
| */ |
| |
| #ifndef __NE2000_BASE_H__ |
| #define __NE2000_BASE_H__ |
| |
| /* |
| * Debugging details |
| * |
| * Set to perms of: |
| * 0 disables all debug output |
| * 1 for process debug output |
| * 2 for added data IO output: get_reg, put_reg |
| * 4 for packet allocation/free output |
| * 8 for only startup status, so we can tell we're installed OK |
| */ |
| #if 0 |
| #define DEBUG 0xf |
| #else |
| #define DEBUG 0 |
| #endif |
| |
| #if DEBUG & 1 |
| #define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0) |
| #define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0) |
| #define PRINTK(args...) printf(args) |
| #else |
| #define DEBUG_FUNCTION() do {} while(0) |
| #define DEBUG_LINE() do {} while(0) |
| #define PRINTK(args...) |
| #endif |
| |
| /* timeout for tx/rx in s */ |
| #define TOUT 5 |
| /* Ether MAC address size */ |
| #define ETHER_ADDR_LEN 6 |
| |
| |
| #define CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA 1 |
| #define CYGACC_CALL_IF_DELAY_US(X) udelay(X) |
| |
| /* H/W infomation struct */ |
| typedef struct hw_info_t { |
| u32 offset; |
| u8 a0, a1, a2; |
| u32 flags; |
| } hw_info_t; |
| |
| typedef struct dp83902a_priv_data { |
| u8* base; |
| u8* data; |
| u8* reset; |
| int tx_next; /* First free Tx page */ |
| int tx_int; /* Expecting interrupt from this buffer */ |
| int rx_next; /* First free Rx page */ |
| int tx1, tx2; /* Page numbers for Tx buffers */ |
| u32 tx1_key, tx2_key; /* Used to ack when packet sent */ |
| int tx1_len, tx2_len; |
| bool tx_started, running, hardwired_esa; |
| u8 esa[6]; |
| void* plf_priv; |
| |
| /* Buffer allocation */ |
| int tx_buf1, tx_buf2; |
| int rx_buf_start, rx_buf_end; |
| } dp83902a_priv_data_t; |
| |
| /* ------------------------------------------------------------------------ */ |
| /* Register offsets */ |
| |
| #define DP_CR 0x00 |
| #define DP_CLDA0 0x01 |
| #define DP_PSTART 0x01 /* write */ |
| #define DP_CLDA1 0x02 |
| #define DP_PSTOP 0x02 /* write */ |
| #define DP_BNDRY 0x03 |
| #define DP_TSR 0x04 |
| #define DP_TPSR 0x04 /* write */ |
| #define DP_NCR 0x05 |
| #define DP_TBCL 0x05 /* write */ |
| #define DP_FIFO 0x06 |
| #define DP_TBCH 0x06 /* write */ |
| #define DP_ISR 0x07 |
| #define DP_CRDA0 0x08 |
| #define DP_RSAL 0x08 /* write */ |
| #define DP_CRDA1 0x09 |
| #define DP_RSAH 0x09 /* write */ |
| #define DP_RBCL 0x0a /* write */ |
| #define DP_RBCH 0x0b /* write */ |
| #define DP_RSR 0x0c |
| #define DP_RCR 0x0c /* write */ |
| #define DP_FER 0x0d |
| #define DP_TCR 0x0d /* write */ |
| #define DP_CER 0x0e |
| #define DP_DCR 0x0e /* write */ |
| #define DP_MISSED 0x0f |
| #define DP_IMR 0x0f /* write */ |
| #define DP_DATAPORT 0x10 /* "eprom" data port */ |
| |
| #define DP_P1_CR 0x00 |
| #define DP_P1_PAR0 0x01 |
| #define DP_P1_PAR1 0x02 |
| #define DP_P1_PAR2 0x03 |
| #define DP_P1_PAR3 0x04 |
| #define DP_P1_PAR4 0x05 |
| #define DP_P1_PAR5 0x06 |
| #define DP_P1_CURP 0x07 |
| #define DP_P1_MAR0 0x08 |
| #define DP_P1_MAR1 0x09 |
| #define DP_P1_MAR2 0x0a |
| #define DP_P1_MAR3 0x0b |
| #define DP_P1_MAR4 0x0c |
| #define DP_P1_MAR5 0x0d |
| #define DP_P1_MAR6 0x0e |
| #define DP_P1_MAR7 0x0f |
| |
| #define DP_P2_CR 0x00 |
| #define DP_P2_PSTART 0x01 |
| #define DP_P2_CLDA0 0x01 /* write */ |
| #define DP_P2_PSTOP 0x02 |
| #define DP_P2_CLDA1 0x02 /* write */ |
| #define DP_P2_RNPP 0x03 |
| #define DP_P2_TPSR 0x04 |
| #define DP_P2_LNPP 0x05 |
| #define DP_P2_ACH 0x06 |
| #define DP_P2_ACL 0x07 |
| #define DP_P2_RCR 0x0c |
| #define DP_P2_TCR 0x0d |
| #define DP_P2_DCR 0x0e |
| #define DP_P2_IMR 0x0f |
| |
| /* Command register - common to all pages */ |
| |
| #define DP_CR_STOP 0x01 /* Stop: software reset */ |
| #define DP_CR_START 0x02 /* Start: initialize device */ |
| #define DP_CR_TXPKT 0x04 /* Transmit packet */ |
| #define DP_CR_RDMA 0x08 /* Read DMA (recv data from device) */ |
| #define DP_CR_WDMA 0x10 /* Write DMA (send data to device) */ |
| #define DP_CR_SEND 0x18 /* Send packet */ |
| #define DP_CR_NODMA 0x20 /* Remote (or no) DMA */ |
| #define DP_CR_PAGE0 0x00 /* Page select */ |
| #define DP_CR_PAGE1 0x40 |
| #define DP_CR_PAGE2 0x80 |
| #define DP_CR_PAGEMSK 0x3F /* Used to mask out page bits */ |
| |
| /* Data configuration register */ |
| |
| #define DP_DCR_WTS 0x01 /* 1=16 bit word transfers */ |
| #define DP_DCR_BOS 0x02 /* 1=Little Endian */ |
| #define DP_DCR_LAS 0x04 /* 1=Single 32 bit DMA mode */ |
| #define DP_DCR_LS 0x08 /* 1=normal mode, 0=loopback */ |
| #define DP_DCR_ARM 0x10 /* 0=no send command (program I/O) */ |
| #define DP_DCR_FIFO_1 0x00 /* FIFO threshold */ |
| #define DP_DCR_FIFO_2 0x20 |
| #define DP_DCR_FIFO_4 0x40 |
| #define DP_DCR_FIFO_6 0x60 |
| |
| #define DP_DCR_INIT (DP_DCR_LS|DP_DCR_FIFO_4) |
| |
| /* Interrupt status register */ |
| |
| #define DP_ISR_RxP 0x01 /* Packet received */ |
| #define DP_ISR_TxP 0x02 /* Packet transmitted */ |
| #define DP_ISR_RxE 0x04 /* Receive error */ |
| #define DP_ISR_TxE 0x08 /* Transmit error */ |
| #define DP_ISR_OFLW 0x10 /* Receive overflow */ |
| #define DP_ISR_CNT 0x20 /* Tally counters need emptying */ |
| #define DP_ISR_RDC 0x40 /* Remote DMA complete */ |
| #define DP_ISR_RESET 0x80 /* Device has reset (shutdown, error) */ |
| |
| /* Interrupt mask register */ |
| |
| #define DP_IMR_RxP 0x01 /* Packet received */ |
| #define DP_IMR_TxP 0x02 /* Packet transmitted */ |
| #define DP_IMR_RxE 0x04 /* Receive error */ |
| #define DP_IMR_TxE 0x08 /* Transmit error */ |
| #define DP_IMR_OFLW 0x10 /* Receive overflow */ |
| #define DP_IMR_CNT 0x20 /* Tall counters need emptying */ |
| #define DP_IMR_RDC 0x40 /* Remote DMA complete */ |
| |
| #define DP_IMR_All 0x3F /* Everything but remote DMA */ |
| |
| /* Receiver control register */ |
| |
| #define DP_RCR_SEP 0x01 /* Save bad(error) packets */ |
| #define DP_RCR_AR 0x02 /* Accept runt packets */ |
| #define DP_RCR_AB 0x04 /* Accept broadcast packets */ |
| #define DP_RCR_AM 0x08 /* Accept multicast packets */ |
| #define DP_RCR_PROM 0x10 /* Promiscuous mode */ |
| #define DP_RCR_MON 0x20 /* Monitor mode - 1=accept no packets */ |
| |
| /* Receiver status register */ |
| |
| #define DP_RSR_RxP 0x01 /* Packet received */ |
| #define DP_RSR_CRC 0x02 /* CRC error */ |
| #define DP_RSR_FRAME 0x04 /* Framing error */ |
| #define DP_RSR_FO 0x08 /* FIFO overrun */ |
| #define DP_RSR_MISS 0x10 /* Missed packet */ |
| #define DP_RSR_PHY 0x20 /* 0=pad match, 1=mad match */ |
| #define DP_RSR_DIS 0x40 /* Receiver disabled */ |
| #define DP_RSR_DFR 0x80 /* Receiver processing deferred */ |
| |
| /* Transmitter control register */ |
| |
| #define DP_TCR_NOCRC 0x01 /* 1=inhibit CRC */ |
| #define DP_TCR_NORMAL 0x00 /* Normal transmitter operation */ |
| #define DP_TCR_LOCAL 0x02 /* Internal NIC loopback */ |
| #define DP_TCR_INLOOP 0x04 /* Full internal loopback */ |
| #define DP_TCR_OUTLOOP 0x08 /* External loopback */ |
| #define DP_TCR_ATD 0x10 /* Auto transmit disable */ |
| #define DP_TCR_OFFSET 0x20 /* Collision offset adjust */ |
| |
| /* Transmit status register */ |
| |
| #define DP_TSR_TxP 0x01 /* Packet transmitted */ |
| #define DP_TSR_COL 0x04 /* Collision (at least one) */ |
| #define DP_TSR_ABT 0x08 /* Aborted because of too many collisions */ |
| #define DP_TSR_CRS 0x10 /* Lost carrier */ |
| #define DP_TSR_FU 0x20 /* FIFO underrun */ |
| #define DP_TSR_CDH 0x40 /* Collision Detect Heartbeat */ |
| #define DP_TSR_OWC 0x80 /* Collision outside normal window */ |
| |
| #define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */ |
| #define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */ |
| |
| /* Functions */ |
| int get_prom(u8* mac_addr, u8* base_addr); |
| |
| #endif /* __NE2000_BASE_H__ */ |