| /* |
| * Faraday FTGMAC100 Ethernet |
| * |
| * (C) Copyright 2009 Faraday Technology |
| * Po-Yu Chuang <ratbert@faraday-tech.com> |
| * |
| * (C) Copyright 2010 Andes Technology |
| * Macpaul Lin <macpaul@andestech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <asm/io.h> |
| #include <asm/dma-mapping.h> |
| #include <linux/mii.h> |
| |
| #include "ftgmac100.h" |
| |
| #define ETH_ZLEN 60 |
| #define CFG_XBUF_SIZE 1536 |
| |
| /* RBSR - hw default init value is also 0x640 */ |
| #define RBSR_DEFAULT_VALUE 0x640 |
| |
| /* PKTBUFSTX/PKTBUFSRX must both be power of 2 */ |
| #define PKTBUFSTX 4 /* must be power of 2 */ |
| |
| struct ftgmac100_data { |
| ulong txdes_dma; |
| struct ftgmac100_txdes *txdes; |
| ulong rxdes_dma; |
| struct ftgmac100_rxdes *rxdes; |
| int tx_index; |
| int rx_index; |
| int phy_addr; |
| }; |
| |
| /* |
| * struct mii_bus functions |
| */ |
| static int ftgmac100_mdiobus_read(struct eth_device *dev, int phy_addr, |
| int regnum) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| int phycr; |
| int i; |
| |
| phycr = readl(&ftgmac100->phycr); |
| |
| /* preserve MDC cycle threshold */ |
| phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; |
| |
| phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
| | FTGMAC100_PHYCR_REGAD(regnum) |
| | FTGMAC100_PHYCR_MIIRD; |
| |
| writel(phycr, &ftgmac100->phycr); |
| |
| for (i = 0; i < 10; i++) { |
| phycr = readl(&ftgmac100->phycr); |
| |
| if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) { |
| int data; |
| |
| data = readl(&ftgmac100->phydata); |
| return FTGMAC100_PHYDATA_MIIRDATA(data); |
| } |
| |
| mdelay(10); |
| } |
| |
| debug("mdio read timed out\n"); |
| return -1; |
| } |
| |
| static int ftgmac100_mdiobus_write(struct eth_device *dev, int phy_addr, |
| int regnum, u16 value) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| int phycr; |
| int data; |
| int i; |
| |
| phycr = readl(&ftgmac100->phycr); |
| |
| /* preserve MDC cycle threshold */ |
| phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; |
| |
| phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
| | FTGMAC100_PHYCR_REGAD(regnum) |
| | FTGMAC100_PHYCR_MIIWR; |
| |
| data = FTGMAC100_PHYDATA_MIIWDATA(value); |
| |
| writel(data, &ftgmac100->phydata); |
| writel(phycr, &ftgmac100->phycr); |
| |
| for (i = 0; i < 10; i++) { |
| phycr = readl(&ftgmac100->phycr); |
| |
| if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0) { |
| debug("(phycr & FTGMAC100_PHYCR_MIIWR) == 0: " \ |
| "phy_addr: %x\n", phy_addr); |
| return 0; |
| } |
| |
| mdelay(1); |
| } |
| |
| debug("mdio write timed out\n"); |
| return -1; |
| } |
| |
| int ftgmac100_phy_read(struct eth_device *dev, int addr, int reg, u16 *value) |
| { |
| *value = ftgmac100_mdiobus_read(dev , addr, reg); |
| |
| if (*value == -1) |
| return -1; |
| |
| return 0; |
| } |
| |
| int ftgmac100_phy_write(struct eth_device *dev, int addr, int reg, u16 value) |
| { |
| if (ftgmac100_mdiobus_write(dev, addr, reg, value) == -1) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int ftgmac100_phy_reset(struct eth_device *dev) |
| { |
| struct ftgmac100_data *priv = dev->priv; |
| int i; |
| u16 status, adv; |
| |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; |
| |
| ftgmac100_phy_write(dev, priv->phy_addr, MII_ADVERTISE, adv); |
| |
| printf("%s: Starting autonegotiation...\n", dev->name); |
| |
| ftgmac100_phy_write(dev, priv->phy_addr, |
| MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); |
| |
| for (i = 0; i < 100000 / 100; i++) { |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); |
| |
| if (status & BMSR_ANEGCOMPLETE) |
| break; |
| mdelay(1); |
| } |
| |
| if (status & BMSR_ANEGCOMPLETE) { |
| printf("%s: Autonegotiation complete\n", dev->name); |
| } else { |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", |
| dev->name, status); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int ftgmac100_phy_init(struct eth_device *dev) |
| { |
| struct ftgmac100_data *priv = dev->priv; |
| |
| int phy_addr; |
| u16 phy_id, status, adv, lpa, stat_ge; |
| int media, speed, duplex; |
| int i; |
| |
| /* Check if the PHY is up to snuff... */ |
| for (phy_addr = 0; phy_addr < CONFIG_PHY_MAX_ADDR; phy_addr++) { |
| |
| ftgmac100_phy_read(dev, phy_addr, MII_PHYSID1, &phy_id); |
| |
| /* |
| * When it is unable to found PHY, |
| * the interface usually return 0xffff or 0x0000 |
| */ |
| if (phy_id != 0xffff && phy_id != 0x0) { |
| printf("%s: found PHY at 0x%02x\n", |
| dev->name, phy_addr); |
| priv->phy_addr = phy_addr; |
| break; |
| } |
| } |
| |
| if (phy_id == 0xffff || phy_id == 0x0) { |
| printf("%s: no PHY present\n", dev->name); |
| return 0; |
| } |
| |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); |
| |
| if (!(status & BMSR_LSTATUS)) { |
| /* Try to re-negotiate if we don't have link already. */ |
| ftgmac100_phy_reset(dev); |
| |
| for (i = 0; i < 100000 / 100; i++) { |
| ftgmac100_phy_read(dev, priv->phy_addr, |
| MII_BMSR, &status); |
| if (status & BMSR_LSTATUS) |
| break; |
| udelay(100); |
| } |
| } |
| |
| if (!(status & BMSR_LSTATUS)) { |
| printf("%s: link down\n", dev->name); |
| return 0; |
| } |
| |
| #ifdef CONFIG_FTGMAC100_EGIGA |
| /* 1000 Base-T Status Register */ |
| ftgmac100_phy_read(dev, priv->phy_addr, |
| MII_STAT1000, &stat_ge); |
| |
| speed = (stat_ge & (LPA_1000FULL | LPA_1000HALF) |
| ? 1 : 0); |
| |
| duplex = ((stat_ge & LPA_1000FULL) |
| ? 1 : 0); |
| |
| if (speed) { /* Speed is 1000 */ |
| printf("%s: link up, 1000bps %s-duplex\n", |
| dev->name, duplex ? "full" : "half"); |
| return 0; |
| } |
| #endif |
| |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_ADVERTISE, &adv); |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_LPA, &lpa); |
| |
| media = mii_nway_result(lpa & adv); |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; |
| |
| printf("%s: link up, %sMbps %s-duplex\n", |
| dev->name, speed ? "100" : "10", duplex ? "full" : "half"); |
| |
| return 1; |
| } |
| |
| static int ftgmac100_update_link_speed(struct eth_device *dev) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| struct ftgmac100_data *priv = dev->priv; |
| |
| unsigned short stat_fe; |
| unsigned short stat_ge; |
| unsigned int maccr; |
| |
| #ifdef CONFIG_FTGMAC100_EGIGA |
| /* 1000 Base-T Status Register */ |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_STAT1000, &stat_ge); |
| #endif |
| |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &stat_fe); |
| |
| if (!(stat_fe & BMSR_LSTATUS)) /* link status up? */ |
| return 0; |
| |
| /* read MAC control register and clear related bits */ |
| maccr = readl(&ftgmac100->maccr) & |
| ~(FTGMAC100_MACCR_GIGA_MODE | |
| FTGMAC100_MACCR_FAST_MODE | |
| FTGMAC100_MACCR_FULLDUP); |
| |
| #ifdef CONFIG_FTGMAC100_EGIGA |
| if (stat_ge & LPA_1000FULL) { |
| /* set gmac for 1000BaseTX and Full Duplex */ |
| maccr |= FTGMAC100_MACCR_GIGA_MODE | FTGMAC100_MACCR_FULLDUP; |
| } |
| |
| if (stat_ge & LPA_1000HALF) { |
| /* set gmac for 1000BaseTX and Half Duplex */ |
| maccr |= FTGMAC100_MACCR_GIGA_MODE; |
| } |
| #endif |
| |
| if (stat_fe & BMSR_100FULL) { |
| /* set MII for 100BaseTX and Full Duplex */ |
| maccr |= FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP; |
| } |
| |
| if (stat_fe & BMSR_10FULL) { |
| /* set MII for 10BaseT and Full Duplex */ |
| maccr |= FTGMAC100_MACCR_FULLDUP; |
| } |
| |
| if (stat_fe & BMSR_100HALF) { |
| /* set MII for 100BaseTX and Half Duplex */ |
| maccr |= FTGMAC100_MACCR_FAST_MODE; |
| } |
| |
| if (stat_fe & BMSR_10HALF) { |
| /* set MII for 10BaseT and Half Duplex */ |
| /* we have already clear these bits, do nothing */ |
| ; |
| } |
| |
| /* update MII config into maccr */ |
| writel(maccr, &ftgmac100->maccr); |
| |
| return 1; |
| } |
| |
| /* |
| * Reset MAC |
| */ |
| static void ftgmac100_reset(struct eth_device *dev) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| |
| debug("%s()\n", __func__); |
| |
| writel(FTGMAC100_MACCR_SW_RST, &ftgmac100->maccr); |
| |
| while (readl(&ftgmac100->maccr) & FTGMAC100_MACCR_SW_RST) |
| ; |
| } |
| |
| /* |
| * Set MAC address |
| */ |
| static void ftgmac100_set_mac(struct eth_device *dev, |
| const unsigned char *mac) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| unsigned int maddr = mac[0] << 8 | mac[1]; |
| unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5]; |
| |
| debug("%s(%x %x)\n", __func__, maddr, laddr); |
| |
| writel(maddr, &ftgmac100->mac_madr); |
| writel(laddr, &ftgmac100->mac_ladr); |
| } |
| |
| static void ftgmac100_set_mac_from_env(struct eth_device *dev) |
| { |
| eth_getenv_enetaddr("ethaddr", dev->enetaddr); |
| |
| ftgmac100_set_mac(dev, dev->enetaddr); |
| } |
| |
| /* |
| * disable transmitter, receiver |
| */ |
| static void ftgmac100_halt(struct eth_device *dev) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| |
| debug("%s()\n", __func__); |
| |
| writel(0, &ftgmac100->maccr); |
| } |
| |
| static int ftgmac100_init(struct eth_device *dev, bd_t *bd) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| struct ftgmac100_data *priv = dev->priv; |
| struct ftgmac100_txdes *txdes; |
| struct ftgmac100_rxdes *rxdes; |
| unsigned int maccr; |
| void *buf; |
| int i; |
| |
| debug("%s()\n", __func__); |
| |
| if (!priv->txdes) { |
| txdes = dma_alloc_coherent( |
| sizeof(*txdes) * PKTBUFSTX, &priv->txdes_dma); |
| if (!txdes) |
| panic("ftgmac100: out of memory\n"); |
| memset(txdes, 0, sizeof(*txdes) * PKTBUFSTX); |
| priv->txdes = txdes; |
| } |
| txdes = priv->txdes; |
| |
| if (!priv->rxdes) { |
| rxdes = dma_alloc_coherent( |
| sizeof(*rxdes) * PKTBUFSRX, &priv->rxdes_dma); |
| if (!rxdes) |
| panic("ftgmac100: out of memory\n"); |
| memset(rxdes, 0, sizeof(*rxdes) * PKTBUFSRX); |
| priv->rxdes = rxdes; |
| } |
| rxdes = priv->rxdes; |
| |
| /* set the ethernet address */ |
| ftgmac100_set_mac_from_env(dev); |
| |
| /* disable all interrupts */ |
| writel(0, &ftgmac100->ier); |
| |
| /* initialize descriptors */ |
| priv->tx_index = 0; |
| priv->rx_index = 0; |
| |
| txdes[PKTBUFSTX - 1].txdes0 = FTGMAC100_TXDES0_EDOTR; |
| rxdes[PKTBUFSRX - 1].rxdes0 = FTGMAC100_RXDES0_EDORR; |
| |
| for (i = 0; i < PKTBUFSTX; i++) { |
| /* TXBUF_BADR */ |
| if (!txdes[i].txdes2) { |
| buf = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE); |
| if (!buf) |
| panic("ftgmac100: out of memory\n"); |
| txdes[i].txdes3 = virt_to_phys(buf); |
| txdes[i].txdes2 = (uint)buf; |
| } |
| txdes[i].txdes1 = 0; |
| } |
| |
| for (i = 0; i < PKTBUFSRX; i++) { |
| /* RXBUF_BADR */ |
| if (!rxdes[i].rxdes2) { |
| buf = net_rx_packets[i]; |
| rxdes[i].rxdes3 = virt_to_phys(buf); |
| rxdes[i].rxdes2 = (uint)buf; |
| } |
| rxdes[i].rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; |
| } |
| |
| /* transmit ring */ |
| writel(priv->txdes_dma, &ftgmac100->txr_badr); |
| |
| /* receive ring */ |
| writel(priv->rxdes_dma, &ftgmac100->rxr_badr); |
| |
| /* poll receive descriptor automatically */ |
| writel(FTGMAC100_APTC_RXPOLL_CNT(1), &ftgmac100->aptc); |
| |
| /* config receive buffer size register */ |
| writel(FTGMAC100_RBSR_SIZE(RBSR_DEFAULT_VALUE), &ftgmac100->rbsr); |
| |
| /* enable transmitter, receiver */ |
| maccr = FTGMAC100_MACCR_TXMAC_EN | |
| FTGMAC100_MACCR_RXMAC_EN | |
| FTGMAC100_MACCR_TXDMA_EN | |
| FTGMAC100_MACCR_RXDMA_EN | |
| FTGMAC100_MACCR_CRC_APD | |
| FTGMAC100_MACCR_FULLDUP | |
| FTGMAC100_MACCR_RX_RUNT | |
| FTGMAC100_MACCR_RX_BROADPKT; |
| |
| writel(maccr, &ftgmac100->maccr); |
| |
| if (!ftgmac100_phy_init(dev)) { |
| if (!ftgmac100_update_link_speed(dev)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Get a data block via Ethernet |
| */ |
| static int ftgmac100_recv(struct eth_device *dev) |
| { |
| struct ftgmac100_data *priv = dev->priv; |
| struct ftgmac100_rxdes *curr_des; |
| unsigned short rxlen; |
| |
| curr_des = &priv->rxdes[priv->rx_index]; |
| |
| if (!(curr_des->rxdes0 & FTGMAC100_RXDES0_RXPKT_RDY)) |
| return -1; |
| |
| if (curr_des->rxdes0 & (FTGMAC100_RXDES0_RX_ERR | |
| FTGMAC100_RXDES0_CRC_ERR | |
| FTGMAC100_RXDES0_FTL | |
| FTGMAC100_RXDES0_RUNT | |
| FTGMAC100_RXDES0_RX_ODD_NB)) { |
| return -1; |
| } |
| |
| rxlen = FTGMAC100_RXDES0_VDBC(curr_des->rxdes0); |
| |
| debug("%s(): RX buffer %d, %x received\n", |
| __func__, priv->rx_index, rxlen); |
| |
| /* invalidate d-cache */ |
| dma_map_single((void *)curr_des->rxdes2, rxlen, DMA_FROM_DEVICE); |
| |
| /* pass the packet up to the protocol layers. */ |
| net_process_received_packet((void *)curr_des->rxdes2, rxlen); |
| |
| /* release buffer to DMA */ |
| curr_des->rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; |
| |
| priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX; |
| |
| return 0; |
| } |
| |
| /* |
| * Send a data block via Ethernet |
| */ |
| static int ftgmac100_send(struct eth_device *dev, void *packet, int length) |
| { |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; |
| struct ftgmac100_data *priv = dev->priv; |
| struct ftgmac100_txdes *curr_des = &priv->txdes[priv->tx_index]; |
| |
| if (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) { |
| debug("%s(): no TX descriptor available\n", __func__); |
| return -1; |
| } |
| |
| debug("%s(%x, %x)\n", __func__, (int)packet, length); |
| |
| length = (length < ETH_ZLEN) ? ETH_ZLEN : length; |
| |
| memcpy((void *)curr_des->txdes2, (void *)packet, length); |
| dma_map_single((void *)curr_des->txdes2, length, DMA_TO_DEVICE); |
| |
| /* only one descriptor on TXBUF */ |
| curr_des->txdes0 &= FTGMAC100_TXDES0_EDOTR; |
| curr_des->txdes0 |= FTGMAC100_TXDES0_FTS | |
| FTGMAC100_TXDES0_LTS | |
| FTGMAC100_TXDES0_TXBUF_SIZE(length) | |
| FTGMAC100_TXDES0_TXDMA_OWN ; |
| |
| /* start transmit */ |
| writel(1, &ftgmac100->txpd); |
| |
| debug("%s(): packet sent\n", __func__); |
| |
| priv->tx_index = (priv->tx_index + 1) % PKTBUFSTX; |
| |
| return 0; |
| } |
| |
| int ftgmac100_initialize(bd_t *bd) |
| { |
| struct eth_device *dev; |
| struct ftgmac100_data *priv; |
| |
| dev = malloc(sizeof *dev); |
| if (!dev) { |
| printf("%s(): failed to allocate dev\n", __func__); |
| goto out; |
| } |
| |
| /* Transmit and receive descriptors should align to 16 bytes */ |
| priv = memalign(16, sizeof(struct ftgmac100_data)); |
| if (!priv) { |
| printf("%s(): failed to allocate priv\n", __func__); |
| goto free_dev; |
| } |
| |
| memset(dev, 0, sizeof(*dev)); |
| memset(priv, 0, sizeof(*priv)); |
| |
| strcpy(dev->name, "FTGMAC100"); |
| dev->iobase = CONFIG_FTGMAC100_BASE; |
| dev->init = ftgmac100_init; |
| dev->halt = ftgmac100_halt; |
| dev->send = ftgmac100_send; |
| dev->recv = ftgmac100_recv; |
| dev->priv = priv; |
| |
| eth_register(dev); |
| |
| ftgmac100_reset(dev); |
| |
| return 1; |
| |
| free_dev: |
| free(dev); |
| out: |
| return 0; |
| } |