drivers/mtd/jedec_flash.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Michael Schwingen, <michael@schwingen.org>
  *
  * based in great part on jedec_probe.c from linux kernel:
  * (C) 2000 Red Hat. GPL'd.
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 /* The DEBUG define must be before common to enable debugging */
 /*#define DEBUG*/

 #include <common.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <environment.h>

 #define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY

 /* AMD */
 #define AM29DL800BB	0x22CB
 #define AM29DL800BT	0x224A

 #define AM29F400BB	0x22AB
 #define AM29F800BB	0x2258
 #define AM29F800BT	0x22D6
 #define AM29LV400BB	0x22BA
 #define AM29LV400BT	0x22B9
 #define AM29LV800BB	0x225B
 #define AM29LV800BT	0x22DA
 #define AM29LV160DT	0x22C4
 #define AM29LV160DB	0x2249
 #define AM29F017D	0x003D
 #define AM29F016D	0x00AD
 #define AM29F080	0x00D5
 #define AM29F040	0x00A4
 #define AM29LV040B	0x004F
 #define AM29F032B	0x0041
 #define AM29F002T	0x00B0

 /* SST */
 #define SST39LF800	0x2781
 #define SST39LF160	0x2782
 #define SST39VF1601	0x234b
 #define SST39LF512	0x00D4
 #define SST39LF010	0x00D5
 #define SST39LF020	0x00D6
 #define SST39LF040	0x00D7
 #define SST39SF010A	0x00B5
 #define SST39SF020A	0x00B6

 /* STM */
 #define STM29F400BB	0x00D6

 /* MXIC */
 #define MX29LV040	0x004F

 /* WINBOND */
 #define W39L040A	0x00D6

 /* AMIC */
 #define A29L040		0x0092

 /* EON */
 #define EN29LV040A	0x004F

 /*
  * Unlock address sets for AMD command sets.
  * Intel command sets use the MTD_UADDR_UNNECESSARY.
  * Each identifier, except MTD_UADDR_UNNECESSARY, and
  * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
  * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
  * initialization need not require initializing all of the
  * unlock addresses for all bit widths.
  */
 enum uaddr {
 	MTD_UADDR_NOT_SUPPORTED = 0,	/* data width not supported */
 	MTD_UADDR_0x0555_0x02AA,
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
 	MTD_UADDR_0x0AAA_0x0555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
 	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
 };


 struct unlock_addr {
 	u32 addr1;
 	u32 addr2;
 };


 /*
  * I don't like the fact that the first entry in unlock_addrs[]
  * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
  * should not be used.  The  problem is that structures with
  * initializers have extra fields initialized to 0.  It is _very_
  * desireable to have the unlock address entries for unsupported
  * data widths automatically initialized - that means that
  * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
  * must go unused.
  */
 static const struct unlock_addr  unlock_addrs[] = {
 	[MTD_UADDR_NOT_SUPPORTED] = {
 		.addr1 = 0xffff,
 		.addr2 = 0xffff
 	},

 	[MTD_UADDR_0x0555_0x02AA] = {
 		.addr1 = 0x0555,
 		.addr2 = 0x02aa
 	},

 	[MTD_UADDR_0x0555_0x0AAA] = {
 		.addr1 = 0x0555,
 		.addr2 = 0x0aaa
 	},

 	[MTD_UADDR_0x5555_0x2AAA] = {
 		.addr1 = 0x5555,
 		.addr2 = 0x2aaa
 	},

 	[MTD_UADDR_0x0AAA_0x0555] = {
 		.addr1 = 0x0AAA,
 		.addr2 = 0x0555
 	},

 	[MTD_UADDR_DONT_CARE] = {
 		.addr1 = 0x0000,      /* Doesn't matter which address */
 		.addr2 = 0x0000       /* is used - must be last entry */
 	},

 	[MTD_UADDR_UNNECESSARY] = {
 		.addr1 = 0x0000,
 		.addr2 = 0x0000
 	}
 };


 struct amd_flash_info {
 	const __u16 mfr_id;
 	const __u16 dev_id;
 	const char *name;
 	const int DevSize;
 	const int NumEraseRegions;
 	const int CmdSet;
 	const __u8 uaddr[4];		/* unlock addrs for 8, 16, 32, 64 */
 	const ulong regions[6];
 };

 #define ERASEINFO(size,blocks) (size<<8)|(blocks-1)

 #define SIZE_64KiB  16
 #define SIZE_128KiB 17
 #define SIZE_256KiB 18
 #define SIZE_512KiB 19
 #define SIZE_1MiB   20
 #define SIZE_2MiB   21
 #define SIZE_4MiB   22
 #define SIZE_8MiB   23

 static const struct amd_flash_info jedec_table[] = {
 #ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
 	{
 		.mfr_id		= (u16)SST_MANUFACT,
 		.dev_id		= SST39LF020,
 		.name		= "SST 39LF020",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
 		},
 		.DevSize	= SIZE_256KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x01000,64),
 		}
 	},
 #endif
 #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
 	{
 		.mfr_id		= (u16)AMD_MANUFACT,
 		.dev_id		= AM29LV040B,
 		.name		= "AMD AM29LV040B",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000,8),
 		}
 	},
 	{
 		.mfr_id		= (u16)SST_MANUFACT,
 		.dev_id		= SST39LF040,
 		.name		= "SST 39LF040",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x01000,128),
 		}
 	},
 	{
 		.mfr_id		= (u16)STM_MANUFACT,
 		.dev_id		= STM_ID_M29W040B,
 		.name		= "ST Micro M29W040B",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000,8),
 		}
 	},
 	{
 		.mfr_id		= (u16)MX_MANUFACT,
 		.dev_id		= MX29LV040,
 		.name		= "MXIC MX29LV040",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000, 8),
 		}
 	},
 	{
 		.mfr_id		= (u16)WINB_MANUFACT,
 		.dev_id		= W39L040A,
 		.name		= "WINBOND W39L040A",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000, 8),
 		}
 	},
 	{
 		.mfr_id		= (u16)AMIC_MANUFACT,
 		.dev_id		= A29L040,
 		.name		= "AMIC A29L040",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000, 8),
 		}
 	},
 	{
 		.mfr_id		= (u16)EON_MANUFACT,
 		.dev_id		= EN29LV040A,
 		.name		= "EON EN29LV040A",
 		.uaddr		= {
 			[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= P_ID_AMD_STD,
 		.NumEraseRegions= 1,
 		.regions	= {
 			ERASEINFO(0x10000, 8),
 		}
 	},
 #endif
 #ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
 	{
 		.mfr_id		= (u16)AMD_MANUFACT,
 		.dev_id		= AM29F400BB,
 		.name		= "AMD AM29F400BB",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x04000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x10000, 7),
 		}
 	},
 	{
 		.mfr_id		= (u16)AMD_MANUFACT,
 		.dev_id		= AM29LV400BB,
 		.name		= "AMD AM29LV400BB",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_512KiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x04000,1),
 			ERASEINFO(0x02000,2),
 			ERASEINFO(0x08000,1),
 			ERASEINFO(0x10000,7),
 		}
 	},
 	{
 		.mfr_id		= (u16)AMD_MANUFACT,
 		.dev_id		= AM29LV800BB,
 		.name		= "AMD AM29LV800BB",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_1MiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x04000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x10000, 15),
 		}
 	},
 	{
 		.mfr_id		= (u16)AMD_MANUFACT,
 		.dev_id		= AM29LV800BT,
 		.name		= "AMD AM29LV800BT",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_1MiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x10000, 15),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x04000, 1),
 		}
 	},
 	{
 		.mfr_id		= (u16)MX_MANUFACT,
 		.dev_id		= AM29LV800BT,
 		.name		= "MXIC MX29LV800BT",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_1MiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x10000, 15),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x04000, 1),
 		}
 	},
 	{
 		.mfr_id		= (u16)EON_ALT_MANU,
 		.dev_id		= AM29LV800BT,
 		.name		= "EON EN29LV800BT",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize	= SIZE_1MiB,
 		.CmdSet		= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions= 4,
 		.regions	= {
 			ERASEINFO(0x10000, 15),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x04000, 1),
 		}
 	},
 	{
 		.mfr_id		= (u16)STM_MANUFACT,
 		.dev_id		= STM29F400BB,
 		.name		= "ST Micro M29F400BB",
 		.uaddr		= {
 			[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
 		},
 		.DevSize		= SIZE_512KiB,
 		.CmdSet			= CFI_CMDSET_AMD_LEGACY,
 		.NumEraseRegions	= 4,
 		.regions		= {
 			ERASEINFO(0x04000, 1),
 			ERASEINFO(0x02000, 2),
 			ERASEINFO(0x08000, 1),
 			ERASEINFO(0x10000, 7),
 		}
 	},
 #endif
 };

 static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
 {
 	int i,j;
 	int sect_cnt;
 	int size_ratio;
 	int total_size;
 	enum uaddr uaddr_idx;

 	size_ratio = info->portwidth / info->chipwidth;

 	debug("Found JEDEC Flash: %s\n", jedec_entry->name);
 	info->vendor = jedec_entry->CmdSet;
 	/* Todo: do we need device-specific timeouts? */
 	info->erase_blk_tout = 30000;
 	info->buffer_write_tout = 1000;
 	info->write_tout = 100;
 	info->name = jedec_entry->name;

 	/* copy unlock addresses from device table to CFI info struct. This
 	   is just here because the addresses are in the table anyway - if
 	   the flash is not detected due to wrong unlock addresses,
 	   flash_detect_legacy would have to try all of them before we even
 	   get here. */
 	switch(info->chipwidth) {
 	case FLASH_CFI_8BIT:
 		uaddr_idx = jedec_entry->uaddr[0];
 		break;
 	case FLASH_CFI_16BIT:
 		uaddr_idx = jedec_entry->uaddr[1];
 		break;
 	case FLASH_CFI_32BIT:
 		uaddr_idx = jedec_entry->uaddr[2];
 		break;
 	default:
 		uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
 		break;
 	}

 	debug("unlock address index %d\n", uaddr_idx);
 	info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
 	info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
 	debug("unlock addresses are 0x%lx/0x%lx\n",
 		info->addr_unlock1, info->addr_unlock2);

 	sect_cnt = 0;
 	total_size = 0;
 	for (i = 0; i < jedec_entry->NumEraseRegions; i++) {
 		ulong erase_region_size = jedec_entry->regions[i] >> 8;
 		ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1;

 		total_size += erase_region_size * erase_region_count;
 		debug("erase_region_count = %ld erase_region_size = %ld\n",
 		       erase_region_count, erase_region_size);
 		for (j = 0; j < erase_region_count; j++) {
 			if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
 				printf("ERROR: too many flash sectors\n");
 				break;
 			}
 			info->start[sect_cnt] = base;
 			base += (erase_region_size * size_ratio);
 			sect_cnt++;
 		}
 	}
 	info->sector_count = sect_cnt;
 	info->size = total_size * size_ratio;
 }

 /*-----------------------------------------------------------------------
  * match jedec ids against table. If a match is found, fill flash_info entry
  */
 int jedec_flash_match(flash_info_t *info, ulong base)
 {
 	int ret = 0;
 	int i;
 	ulong mask = 0xFFFF;
 	if (info->chipwidth == 1)
 		mask = 0xFF;

 	for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
 		if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) &&
 		    (jedec_table[i].dev_id & mask) == (info->device_id & mask)) {
 			fill_info(info, &jedec_table[i], base);
 			ret = 1;
 			break;
 		}
 	}
 	return ret;
 }
	/*
	* (C) Copyright 2007
	* Michael Schwingen, <michael@schwingen.org>
	*
	* based in great part on jedec_probe.c from linux kernel:
	* (C) 2000 Red Hat. GPL'd.
	* Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	/* The DEBUG define must be before common to enable debugging */
	/#define DEBUG/

	#include <common.h>
	#include <asm/processor.h>
	#include <asm/io.h>
	#include <asm/byteorder.h>
	#include <environment.h>

	#define P_ID_AMD_STD CFI_CMDSET_AMD_LEGACY

	/* AMD */
	#define AM29DL800BB 0x22CB
	#define AM29DL800BT 0x224A

	#define AM29F400BB 0x22AB
	#define AM29F800BB 0x2258
	#define AM29F800BT 0x22D6
	#define AM29LV400BB 0x22BA
	#define AM29LV400BT 0x22B9
	#define AM29LV800BB 0x225B
	#define AM29LV800BT 0x22DA
	#define AM29LV160DT 0x22C4
	#define AM29LV160DB 0x2249
	#define AM29F017D 0x003D
	#define AM29F016D 0x00AD
	#define AM29F080 0x00D5
	#define AM29F040 0x00A4
	#define AM29LV040B 0x004F
	#define AM29F032B 0x0041
	#define AM29F002T 0x00B0

	/* SST */
	#define SST39LF800 0x2781
	#define SST39LF160 0x2782
	#define SST39VF1601 0x234b
	#define SST39LF512 0x00D4
	#define SST39LF010 0x00D5
	#define SST39LF020 0x00D6
	#define SST39LF040 0x00D7
	#define SST39SF010A 0x00B5
	#define SST39SF020A 0x00B6

	/* STM */
	#define STM29F400BB 0x00D6

	/* MXIC */
	#define MX29LV040 0x004F

	/* WINBOND */
	#define W39L040A 0x00D6

	/* AMIC */
	#define A29L040 0x0092

	/* EON */
	#define EN29LV040A 0x004F

	/*
	* Unlock address sets for AMD command sets.
	* Intel command sets use the MTD_UADDR_UNNECESSARY.
	* Each identifier, except MTD_UADDR_UNNECESSARY, and
	* MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[].
	* MTD_UADDR_NOT_SUPPORTED must be 0 so that structure
	* initialization need not require initializing all of the
	* unlock addresses for all bit widths.
	*/
	enum uaddr {
	MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */
	MTD_UADDR_0x0555_0x02AA,
	MTD_UADDR_0x0555_0x0AAA,
	MTD_UADDR_0x5555_0x2AAA,
	MTD_UADDR_0x0AAA_0x0555,
	MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */
	MTD_UADDR_UNNECESSARY, /* Does not require any address */
	};


	struct unlock_addr {
	u32 addr1;
	u32 addr2;
	};


	/*
	* I don't like the fact that the first entry in unlock_addrs[]
	* exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore,
	* should not be used. The problem is that structures with
	* initializers have extra fields initialized to 0. It is _very_
	* desireable to have the unlock address entries for unsupported
	* data widths automatically initialized - that means that
	* MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here
	* must go unused.
	*/
	static const struct unlock_addr unlock_addrs[] = {
	[MTD_UADDR_NOT_SUPPORTED] = {
	.addr1 = 0xffff,
	.addr2 = 0xffff
	},

	[MTD_UADDR_0x0555_0x02AA] = {
	.addr1 = 0x0555,
	.addr2 = 0x02aa
	},

	[MTD_UADDR_0x0555_0x0AAA] = {
	.addr1 = 0x0555,
	.addr2 = 0x0aaa
	},

	[MTD_UADDR_0x5555_0x2AAA] = {
	.addr1 = 0x5555,
	.addr2 = 0x2aaa
	},

	[MTD_UADDR_0x0AAA_0x0555] = {
	.addr1 = 0x0AAA,
	.addr2 = 0x0555
	},

	[MTD_UADDR_DONT_CARE] = {
	.addr1 = 0x0000, /* Doesn't matter which address */
	.addr2 = 0x0000 /* is used - must be last entry */
	},

	[MTD_UADDR_UNNECESSARY] = {
	.addr1 = 0x0000,
	.addr2 = 0x0000
	}
	};


	struct amd_flash_info {
	const __u16 mfr_id;
	const __u16 dev_id;
	const char *name;
	const int DevSize;
	const int NumEraseRegions;
	const int CmdSet;
	const __u8 uaddr[4]; /* unlock addrs for 8, 16, 32, 64 */
	const ulong regions[6];
	};

	#define ERASEINFO(size,blocks) (size<<8)\|(blocks-1)

	#define SIZE_64KiB 16
	#define SIZE_128KiB 17
	#define SIZE_256KiB 18
	#define SIZE_512KiB 19
	#define SIZE_1MiB 20
	#define SIZE_2MiB 21
	#define SIZE_4MiB 22
	#define SIZE_8MiB 23

	static const struct amd_flash_info jedec_table[] = {
	#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
	{
	.mfr_id = (u16)SST_MANUFACT,
	.dev_id = SST39LF020,
	.name = "SST 39LF020",
	.uaddr = {
	[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
	},
	.DevSize = SIZE_256KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x01000,64),
	}
	},
	#endif
	#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
	{
	.mfr_id = (u16)AMD_MANUFACT,
	.dev_id = AM29LV040B,
	.name = "AMD AM29LV040B",
	.uaddr = {
	[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000,8),
	}
	},
	{
	.mfr_id = (u16)SST_MANUFACT,
	.dev_id = SST39LF040,
	.name = "SST 39LF040",
	.uaddr = {
	[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x01000,128),
	}
	},
	{
	.mfr_id = (u16)STM_MANUFACT,
	.dev_id = STM_ID_M29W040B,
	.name = "ST Micro M29W040B",
	.uaddr = {
	[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000,8),
	}
	},
	{
	.mfr_id = (u16)MX_MANUFACT,
	.dev_id = MX29LV040,
	.name = "MXIC MX29LV040",
	.uaddr = {
	[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000, 8),
	}
	},
	{
	.mfr_id = (u16)WINB_MANUFACT,
	.dev_id = W39L040A,
	.name = "WINBOND W39L040A",
	.uaddr = {
	[0] = MTD_UADDR_0x5555_0x2AAA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000, 8),
	}
	},
	{
	.mfr_id = (u16)AMIC_MANUFACT,
	.dev_id = A29L040,
	.name = "AMIC A29L040",
	.uaddr = {
	[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000, 8),
	}
	},
	{
	.mfr_id = (u16)EON_MANUFACT,
	.dev_id = EN29LV040A,
	.name = "EON EN29LV040A",
	.uaddr = {
	[0] = MTD_UADDR_0x0555_0x02AA /* x8 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = P_ID_AMD_STD,
	.NumEraseRegions= 1,
	.regions = {
	ERASEINFO(0x10000, 8),
	}
	},
	#endif
	#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
	{
	.mfr_id = (u16)AMD_MANUFACT,
	.dev_id = AM29F400BB,
	.name = "AMD AM29F400BB",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x04000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x10000, 7),
	}
	},
	{
	.mfr_id = (u16)AMD_MANUFACT,
	.dev_id = AM29LV400BB,
	.name = "AMD AM29LV400BB",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x04000,1),
	ERASEINFO(0x02000,2),
	ERASEINFO(0x08000,1),
	ERASEINFO(0x10000,7),
	}
	},
	{
	.mfr_id = (u16)AMD_MANUFACT,
	.dev_id = AM29LV800BB,
	.name = "AMD AM29LV800BB",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_1MiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x04000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x10000, 15),
	}
	},
	{
	.mfr_id = (u16)AMD_MANUFACT,
	.dev_id = AM29LV800BT,
	.name = "AMD AM29LV800BT",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_1MiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x10000, 15),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x04000, 1),
	}
	},
	{
	.mfr_id = (u16)MX_MANUFACT,
	.dev_id = AM29LV800BT,
	.name = "MXIC MX29LV800BT",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_1MiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x10000, 15),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x04000, 1),
	}
	},
	{
	.mfr_id = (u16)EON_ALT_MANU,
	.dev_id = AM29LV800BT,
	.name = "EON EN29LV800BT",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_1MiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions= 4,
	.regions = {
	ERASEINFO(0x10000, 15),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x04000, 1),
	}
	},
	{
	.mfr_id = (u16)STM_MANUFACT,
	.dev_id = STM29F400BB,
	.name = "ST Micro M29F400BB",
	.uaddr = {
	[1] = MTD_UADDR_0x0555_0x02AA /* x16 */
	},
	.DevSize = SIZE_512KiB,
	.CmdSet = CFI_CMDSET_AMD_LEGACY,
	.NumEraseRegions = 4,
	.regions = {
	ERASEINFO(0x04000, 1),
	ERASEINFO(0x02000, 2),
	ERASEINFO(0x08000, 1),
	ERASEINFO(0x10000, 7),
	}
	},
	#endif
	};

	static inline void fill_info(flash_info_t info, const struct amd_flash_info jedec_entry, ulong base)
	{
	int i,j;
	int sect_cnt;
	int size_ratio;
	int total_size;
	enum uaddr uaddr_idx;

	size_ratio = info->portwidth / info->chipwidth;

	debug("Found JEDEC Flash: %s\n", jedec_entry->name);
	info->vendor = jedec_entry->CmdSet;
	/* Todo: do we need device-specific timeouts? */
	info->erase_blk_tout = 30000;
	info->buffer_write_tout = 1000;
	info->write_tout = 100;
	info->name = jedec_entry->name;

	/* copy unlock addresses from device table to CFI info struct. This
	is just here because the addresses are in the table anyway - if
	the flash is not detected due to wrong unlock addresses,
	flash_detect_legacy would have to try all of them before we even
	get here. */
	switch(info->chipwidth) {
	case FLASH_CFI_8BIT:
	uaddr_idx = jedec_entry->uaddr[0];
	break;
	case FLASH_CFI_16BIT:
	uaddr_idx = jedec_entry->uaddr[1];
	break;
	case FLASH_CFI_32BIT:
	uaddr_idx = jedec_entry->uaddr[2];
	break;
	default:
	uaddr_idx = MTD_UADDR_NOT_SUPPORTED;
	break;
	}

	debug("unlock address index %d\n", uaddr_idx);
	info->addr_unlock1 = unlock_addrs[uaddr_idx].addr1;
	info->addr_unlock2 = unlock_addrs[uaddr_idx].addr2;
	debug("unlock addresses are 0x%lx/0x%lx\n",
	info->addr_unlock1, info->addr_unlock2);

	sect_cnt = 0;
	total_size = 0;
	for (i = 0; i < jedec_entry->NumEraseRegions; i++) {
	ulong erase_region_size = jedec_entry->regions[i] >> 8;
	ulong erase_region_count = (jedec_entry->regions[i] & 0xff) + 1;

	total_size += erase_region_size * erase_region_count;
	debug("erase_region_count = %ld erase_region_size = %ld\n",
	erase_region_count, erase_region_size);
	for (j = 0; j < erase_region_count; j++) {
	if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
	printf("ERROR: too many flash sectors\n");
	break;
	}
	info->start[sect_cnt] = base;
	base += (erase_region_size * size_ratio);
	sect_cnt++;
	}
	}
	info->sector_count = sect_cnt;
	info->size = total_size * size_ratio;
	}

	/*-----------------------------------------------------------------------
	* match jedec ids against table. If a match is found, fill flash_info entry
	*/
	int jedec_flash_match(flash_info_t *info, ulong base)
	{
	int ret = 0;
	int i;
	ulong mask = 0xFFFF;
	if (info->chipwidth == 1)
	mask = 0xFF;

	for (i = 0; i < ARRAY_SIZE(jedec_table); i++) {
	if ((jedec_table[i].mfr_id & mask) == (info->manufacturer_id & mask) &&
	(jedec_table[i].dev_id & mask) == (info->device_id & mask)) {
	fill_info(info, &jedec_table[i], base);
	ret = 1;
	break;
	}
	}
	return ret;
	}