cmd/tsi148.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2009 Reinhard Arlt, reinhard.arlt@esd-electronics.com
  *
  * base on universe.h by
  *
  * (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <command.h>
 #include <malloc.h>
 #include <asm/io.h>
 #include <pci.h>

 #include <tsi148.h>

 #define LPCI_VENDOR PCI_VENDOR_ID_TUNDRA
 #define LPCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148

 typedef struct _TSI148_DEV TSI148_DEV;

 struct _TSI148_DEV {
 	int           bus;
 	pci_dev_t     busdevfn;
 	TSI148       *uregs;
 	unsigned int  pci_bs;
 };

 static TSI148_DEV *dev;

 /*
  * Most of the TSI148 register are BIGENDIAN
  * This is the reason for the __raw_writel(htonl(x), x) usage!
  */

 int tsi148_init(void)
 {
 	int j, result;
 	pci_dev_t busdevfn;
 	unsigned int val;

 	busdevfn = pci_find_device(LPCI_VENDOR, LPCI_DEVICE, 0);
 	if (busdevfn == -1) {
 		puts("Tsi148: No Tundra Tsi148 found!\n");
 		return -1;
 	}

 	/* Lets turn Latency off */
 	pci_write_config_dword(busdevfn, 0x0c, 0);

 	dev = malloc(sizeof(*dev));
 	if (NULL == dev) {
 		puts("Tsi148: No memory!\n");
 		return -1;
 	}

 	memset(dev, 0, sizeof(*dev));
 	dev->busdevfn = busdevfn;

 	pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
 	val &= ~0xf;
 	dev->uregs = (TSI148 *)val;

 	debug("Tsi148: Base    : %p\n", dev->uregs);

 	/* check mapping */
 	debug("Tsi148: Read via mapping, PCI_ID = %08X\n",
 	      readl(&dev->uregs->pci_id));
 	if (((LPCI_DEVICE << 16) | LPCI_VENDOR) != readl(&dev->uregs->pci_id)) {
 		printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n",
 		       readl(&dev->uregs->pci_id));
 		result = -1;
 		goto break_30;
 	}

 	debug("Tsi148: PCI_BS = %08X\n", readl(&dev->uregs->pci_mbarl));

 	dev->pci_bs = readl(&dev->uregs->pci_mbarl);

 	/* turn off windows */
 	for (j = 0; j < 8; j++) {
 		__raw_writel(htonl(0x00000000), &dev->uregs->outbound[j].otat);
 		__raw_writel(htonl(0x00000000), &dev->uregs->inbound[j].itat);
 	}

 	/* Tsi148 VME timeout etc */
 	__raw_writel(htonl(0x00000084), &dev->uregs->vctrl);

 #ifdef DEBUG
 	if ((__raw_readl(&dev->uregs->vstat) & 0x00000100) != 0)
 		printf("Tsi148: System Controller!\n");
 	else
 		printf("Tsi148: Not System Controller!\n");
 #endif

 	/*
 	 * Lets turn off interrupts
 	 */
 	/* Disable interrupts in Tsi148 first */
 	__raw_writel(htonl(0x00000000), &dev->uregs->inten);
 	/* Disable interrupt out */
 	__raw_writel(htonl(0x00000000), &dev->uregs->inteo);
 	eieio();
 	/* Reset all IRQ's */
 	__raw_writel(htonl(0x03ff3f00), &dev->uregs->intc);
 	/* Map all ints to 0 */
 	__raw_writel(htonl(0x00000000), &dev->uregs->intm1);
 	__raw_writel(htonl(0x00000000), &dev->uregs->intm2);
 	eieio();

 	val = __raw_readl(&dev->uregs->vstat);
 	val &= ~(0x00004000);
 	__raw_writel(val, &dev->uregs->vstat);
 	eieio();

 	debug("Tsi148: register struct size %08x\n", sizeof(TSI148));

 	return 0;

  break_30:
 	free(dev);
 	dev = NULL;

 	return result;
 }

 /*
  * Create pci slave window (access: pci -> vme)
  */
 int tsi148_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr,
 			    int size, int vam, int vdw)
 {
 	int result, i;
 	unsigned int ctl = 0;

 	if (NULL == dev) {
 		result = -1;
 		goto exit_10;
 	}

 	for (i = 0; i < 8; i++) {
 		if (0x00000000 == readl(&dev->uregs->outbound[i].otat))
 			break;
 	}

 	if (i > 7) {
 		printf("Tsi148: No Image available\n");
 		result = -1;
 		goto exit_10;
 	}

 	debug("Tsi148: Using image %d\n", i);

 	printf("Tsi148: Pci addr %08x\n", pciAddr);

 	__raw_writel(htonl(pciAddr), &dev->uregs->outbound[i].otsal);
 	__raw_writel(0x00000000, &dev->uregs->outbound[i].otsau);
 	__raw_writel(htonl(pciAddr + size), &dev->uregs->outbound[i].oteal);
 	__raw_writel(0x00000000, &dev->uregs->outbound[i].oteau);
 	__raw_writel(htonl(vmeAddr - pciAddr), &dev->uregs->outbound[i].otofl);
 	__raw_writel(0x00000000, &dev->uregs->outbound[i].otofu);

 	switch (vam & VME_AM_Axx) {
 	case VME_AM_A16:
 		ctl = 0x00000000;
 		break;
 	case VME_AM_A24:
 		ctl = 0x00000001;
 		break;
 	case VME_AM_A32:
 		ctl = 0x00000002;
 		break;
 	}

 	switch (vam & VME_AM_Mxx) {
 	case VME_AM_DATA:
 		ctl |= 0x00000000;
 		break;
 	case VME_AM_PROG:
 		ctl |= 0x00000010;
 		break;
 	}

 	if (vam & VME_AM_SUP)
 		ctl |= 0x00000020;

 	switch (vdw & VME_FLAG_Dxx) {
 	case VME_FLAG_D16:
 		ctl |= 0x00000000;
 		break;
 	case VME_FLAG_D32:
 		ctl |= 0x00000040;
 		break;
 	}

 	ctl |= 0x80040000;	/* enable, no prefetch */

 	__raw_writel(htonl(ctl), &dev->uregs->outbound[i].otat);

 	debug("Tsi148: window-addr                =%p\n",
 	      &dev->uregs->outbound[i].otsau);
 	debug("Tsi148: pci slave window[%d] attr  =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->outbound[i].otat)));
 	debug("Tsi148: pci slave window[%d] start =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->outbound[i].otsal)));
 	debug("Tsi148: pci slave window[%d] end   =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->outbound[i].oteal)));
 	debug("Tsi148: pci slave window[%d] offset=%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->outbound[i].otofl)));

 	return 0;

  exit_10:
 	return -result;
 }

 unsigned int tsi148_eval_vam(int vam)
 {
 	unsigned int ctl = 0;

 	switch (vam & VME_AM_Axx) {
 	case VME_AM_A16:
 		ctl = 0x00000000;
 		break;
 	case VME_AM_A24:
 		ctl = 0x00000010;
 		break;
 	case VME_AM_A32:
 		ctl = 0x00000020;
 		break;
 	}
 	switch (vam & VME_AM_Mxx) {
 	case VME_AM_DATA:
 		ctl |= 0x00000001;
 		break;
 	case VME_AM_PROG:
 		ctl |= 0x00000002;
 		break;
 	case (VME_AM_PROG | VME_AM_DATA):
 		ctl |= 0x00000003;
 		break;
 	}

 	if (vam & VME_AM_SUP)
 		ctl |= 0x00000008;
 	if (vam & VME_AM_USR)
 		ctl |= 0x00000004;

 	return ctl;
 }

 /*
  * Create vme slave window (access: vme -> pci)
  */
 int tsi148_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr,
 			    int size, int vam)
 {
 	int result, i;
 	unsigned int ctl = 0;

 	if (NULL == dev) {
 		result = -1;
 		goto exit_10;
 	}

 	for (i = 0; i < 8; i++) {
 		if (0x00000000 == readl(&dev->uregs->inbound[i].itat))
 			break;
 	}

 	if (i > 7) {
 		printf("Tsi148: No Image available\n");
 		result = -1;
 		goto exit_10;
 	}

 	debug("Tsi148: Using image %d\n", i);

 	__raw_writel(htonl(vmeAddr), &dev->uregs->inbound[i].itsal);
 	__raw_writel(0x00000000, &dev->uregs->inbound[i].itsau);
 	__raw_writel(htonl(vmeAddr + size), &dev->uregs->inbound[i].iteal);
 	__raw_writel(0x00000000, &dev->uregs->inbound[i].iteau);
 	__raw_writel(htonl(pciAddr - vmeAddr), &dev->uregs->inbound[i].itofl);
 	if (vmeAddr > pciAddr)
 		__raw_writel(0xffffffff, &dev->uregs->inbound[i].itofu);
 	else
 		__raw_writel(0x00000000, &dev->uregs->inbound[i].itofu);

 	ctl = tsi148_eval_vam(vam);
 	ctl |= 0x80000000;	/* enable */
 	__raw_writel(htonl(ctl), &dev->uregs->inbound[i].itat);

 	debug("Tsi148: window-addr                =%p\n",
 	      &dev->uregs->inbound[i].itsau);
 	debug("Tsi148: vme slave window[%d] attr  =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->inbound[i].itat)));
 	debug("Tsi148: vme slave window[%d] start =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->inbound[i].itsal)));
 	debug("Tsi148: vme slave window[%d] end   =%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->inbound[i].iteal)));
 	debug("Tsi148: vme slave window[%d] offset=%08x\n",
 	      i, ntohl(__raw_readl(&dev->uregs->inbound[i].itofl)));

 	return 0;

  exit_10:
 	return -result;
 }

 /*
  * Create vme slave window (access: vme -> gcsr)
  */
 int tsi148_vme_gcsr_window(unsigned int vmeAddr, int vam)
 {
 	int result;
 	unsigned int ctl;

 	result = 0;

 	if (NULL == dev) {
 		result = 1;
 	} else {
 		__raw_writel(htonl(vmeAddr), &dev->uregs->gbal);
 		__raw_writel(0x00000000, &dev->uregs->gbau);

 		ctl = tsi148_eval_vam(vam);
 		ctl |= 0x00000080;	/* enable */
 		__raw_writel(htonl(ctl), &dev->uregs->gcsrat);
 	}

 	return result;
 }

 /*
  * Create vme slave window (access: vme -> crcsr)
  */
 int tsi148_vme_crcsr_window(unsigned int vmeAddr)
 {
 	int result;
 	unsigned int ctl;

 	result = 0;

 	if (NULL == dev) {
 		result = 1;
 	} else {
 		__raw_writel(htonl(vmeAddr), &dev->uregs->crol);
 		__raw_writel(0x00000000, &dev->uregs->crou);

 		ctl = 0x00000080;	/* enable */
 		__raw_writel(htonl(ctl), &dev->uregs->crat);
 	}

 	return result;
 }

 /*
  * Create vme slave window (access: vme -> crg)
  */
 int tsi148_vme_crg_window(unsigned int vmeAddr, int vam)
 {
 	int result;
 	unsigned int ctl;

 	result = 0;

 	if (NULL == dev) {
 		result = 1;
 	} else {
 		__raw_writel(htonl(vmeAddr), &dev->uregs->cbal);
 		__raw_writel(0x00000000, &dev->uregs->cbau);

 		ctl = tsi148_eval_vam(vam);
 		ctl |= 0x00000080;	/* enable */
 		__raw_writel(htonl(ctl), &dev->uregs->crgat);
 	}

 	return result;
 }

 /*
  * Tundra Tsi148 configuration
  */
 int do_tsi148(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, vdw = 0;
 	char cmd = 'x';

 	/* get parameter */
 	if (argc > 1)
 		cmd = argv[1][0];
 	if (argc > 2)
 		addr1 = simple_strtoul(argv[2], NULL, 16);
 	if (argc > 3)
 		addr2 = simple_strtoul(argv[3], NULL, 16);
 	if (argc > 4)
 		size = simple_strtoul(argv[4], NULL, 16);
 	if (argc > 5)
 		vam = simple_strtoul(argv[5], NULL, 16);
 	if (argc > 6)
 		vdw = simple_strtoul(argv[6], NULL, 16);

 	switch (cmd) {
 	case 'c':
 		if (strcmp(argv[1], "crg") == 0) {
 			vam = addr2;
 			printf("Tsi148: Configuring VME CRG Window "
 			       "(VME->CRG):\n");
 			printf("  vme=%08lx vam=%02lx\n", addr1, vam);
 			tsi148_vme_crg_window(addr1, vam);
 		} else {
 			printf("Tsi148: Configuring VME CR/CSR Window "
 			       "(VME->CR/CSR):\n");
 			printf("  pci=%08lx\n", addr1);
 			tsi148_vme_crcsr_window(addr1);
 		}
 		break;
 	case 'i':		/* init */
 		tsi148_init();
 		break;
 	case 'g':
 		vam = addr2;
 		printf("Tsi148: Configuring VME GCSR Window (VME->GCSR):\n");
 		printf("  vme=%08lx vam=%02lx\n", addr1, vam);
 		tsi148_vme_gcsr_window(addr1, vam);
 		break;
 	case 'v':		/* vme */
 		printf("Tsi148: Configuring VME Slave Window (VME->PCI):\n");
 		printf("  vme=%08lx pci=%08lx size=%08lx vam=%02lx\n",
 		       addr1, addr2, size, vam);
 		tsi148_vme_slave_window(addr1, addr2, size, vam);
 		break;
 	case 'p':		/* pci */
 		printf("Tsi148: Configuring PCI Slave Window (PCI->VME):\n");
 		printf("  pci=%08lx vme=%08lx size=%08lx vam=%02lx vdw=%02lx\n",
 		       addr1, addr2, size, vam, vdw);
 		tsi148_pci_slave_window(addr1, addr2, size, vam, vdw);
 		break;
 	default:
 		printf("Tsi148: Command %s not supported!\n", argv[1]);
 	}

 	return 0;
 }

 U_BOOT_CMD(
 	tsi148,	7,	1,	do_tsi148,
 	"initialize and configure Turndra Tsi148\n",
 	"init\n"
 	"    - initialize tsi148\n"
 	"tsi148 vme   [vme_addr] [pci_addr] [size] [vam]\n"
 	"    - create vme slave window (access: vme->pci)\n"
 	"tsi148 pci   [pci_addr] [vme_addr] [size] [vam] [vdw]\n"
 	"    - create pci slave window (access: pci->vme)\n"
 	"tsi148 crg   [vme_addr] [vam]\n"
 	"    - create vme slave window: (access vme->CRG\n"
 	"tsi148 crcsr [pci_addr]\n"
 	"    - create vme slave window: (access vme->CR/CSR\n"
 	"tsi148 gcsr  [vme_addr] [vam]\n"
 	"    - create vme slave window: (access vme->GCSR\n"
 	"    [vam] = VMEbus Address-Modifier:  01 -> A16 Address Space\n"
 	"                                      02 -> A24 Address Space\n"
 	"                                      03 -> A32 Address Space\n"
 	"                                      04 -> Usr        AM Code\n"
 	"                                      08 -> Supervisor AM Code\n"
 	"                                      10 -> Data AM Code\n"
 	"                                      20 -> Program AM Code\n"
 	"    [vdw] = VMEbus Maximum Datawidth: 02 -> D16 Data Width\n"
 	"                                      03 -> D32 Data Width\n"
 );
	/*
	* (C) Copyright 2009 Reinhard Arlt, reinhard.arlt@esd-electronics.com
	*
	* base on universe.h by
	*
	* (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <command.h>
	#include <malloc.h>
	#include <asm/io.h>
	#include <pci.h>

	#include <tsi148.h>

	#define LPCI_VENDOR PCI_VENDOR_ID_TUNDRA
	#define LPCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148

	typedef struct _TSI148_DEV TSI148_DEV;

	struct _TSI148_DEV {
	int bus;
	pci_dev_t busdevfn;
	TSI148 *uregs;
	unsigned int pci_bs;
	};

	static TSI148_DEV *dev;

	/*
	* Most of the TSI148 register are BIGENDIAN
	* This is the reason for the __raw_writel(htonl(x), x) usage!
	*/

	int tsi148_init(void)
	{
	int j, result;
	pci_dev_t busdevfn;
	unsigned int val;

	busdevfn = pci_find_device(LPCI_VENDOR, LPCI_DEVICE, 0);
	if (busdevfn == -1) {
	puts("Tsi148: No Tundra Tsi148 found!\n");
	return -1;
	}

	/* Lets turn Latency off */
	pci_write_config_dword(busdevfn, 0x0c, 0);

	dev = malloc(sizeof(*dev));
	if (NULL == dev) {
	puts("Tsi148: No memory!\n");
	return -1;
	}

	memset(dev, 0, sizeof(*dev));
	dev->busdevfn = busdevfn;

	pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
	val &= ~0xf;
	dev->uregs = (TSI148 *)val;

	debug("Tsi148: Base : %p\n", dev->uregs);

	/* check mapping */
	debug("Tsi148: Read via mapping, PCI_ID = %08X\n",
	readl(&dev->uregs->pci_id));
	if (((LPCI_DEVICE << 16) \| LPCI_VENDOR) != readl(&dev->uregs->pci_id)) {
	printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n",
	readl(&dev->uregs->pci_id));
	result = -1;
	goto break_30;
	}

	debug("Tsi148: PCI_BS = %08X\n", readl(&dev->uregs->pci_mbarl));

	dev->pci_bs = readl(&dev->uregs->pci_mbarl);

	/* turn off windows */
	for (j = 0; j < 8; j++) {
	__raw_writel(htonl(0x00000000), &dev->uregs->outbound[j].otat);
	__raw_writel(htonl(0x00000000), &dev->uregs->inbound[j].itat);
	}

	/* Tsi148 VME timeout etc */
	__raw_writel(htonl(0x00000084), &dev->uregs->vctrl);

	#ifdef DEBUG
	if ((__raw_readl(&dev->uregs->vstat) & 0x00000100) != 0)
	printf("Tsi148: System Controller!\n");
	else
	printf("Tsi148: Not System Controller!\n");
	#endif

	/*
	* Lets turn off interrupts
	*/
	/* Disable interrupts in Tsi148 first */
	__raw_writel(htonl(0x00000000), &dev->uregs->inten);
	/* Disable interrupt out */
	__raw_writel(htonl(0x00000000), &dev->uregs->inteo);
	eieio();
	/* Reset all IRQ's */
	__raw_writel(htonl(0x03ff3f00), &dev->uregs->intc);
	/* Map all ints to 0 */
	__raw_writel(htonl(0x00000000), &dev->uregs->intm1);
	__raw_writel(htonl(0x00000000), &dev->uregs->intm2);
	eieio();

	val = __raw_readl(&dev->uregs->vstat);
	val &= ~(0x00004000);
	__raw_writel(val, &dev->uregs->vstat);
	eieio();

	debug("Tsi148: register struct size %08x\n", sizeof(TSI148));

	return 0;

	break_30:
	free(dev);
	dev = NULL;

	return result;
	}

	/*
	* Create pci slave window (access: pci -> vme)
	*/
	int tsi148_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr,
	int size, int vam, int vdw)
	{
	int result, i;
	unsigned int ctl = 0;

	if (NULL == dev) {
	result = -1;
	goto exit_10;
	}

	for (i = 0; i < 8; i++) {
	if (0x00000000 == readl(&dev->uregs->outbound[i].otat))
	break;
	}

	if (i > 7) {
	printf("Tsi148: No Image available\n");
	result = -1;
	goto exit_10;
	}

	debug("Tsi148: Using image %d\n", i);

	printf("Tsi148: Pci addr %08x\n", pciAddr);

	__raw_writel(htonl(pciAddr), &dev->uregs->outbound[i].otsal);
	__raw_writel(0x00000000, &dev->uregs->outbound[i].otsau);
	__raw_writel(htonl(pciAddr + size), &dev->uregs->outbound[i].oteal);
	__raw_writel(0x00000000, &dev->uregs->outbound[i].oteau);
	__raw_writel(htonl(vmeAddr - pciAddr), &dev->uregs->outbound[i].otofl);
	__raw_writel(0x00000000, &dev->uregs->outbound[i].otofu);

	switch (vam & VME_AM_Axx) {
	case VME_AM_A16:
	ctl = 0x00000000;
	break;
	case VME_AM_A24:
	ctl = 0x00000001;
	break;
	case VME_AM_A32:
	ctl = 0x00000002;
	break;
	}

	switch (vam & VME_AM_Mxx) {
	case VME_AM_DATA:
	ctl \|= 0x00000000;
	break;
	case VME_AM_PROG:
	ctl \|= 0x00000010;
	break;
	}

	if (vam & VME_AM_SUP)
	ctl \|= 0x00000020;

	switch (vdw & VME_FLAG_Dxx) {
	case VME_FLAG_D16:
	ctl \|= 0x00000000;
	break;
	case VME_FLAG_D32:
	ctl \|= 0x00000040;
	break;
	}

	ctl \|= 0x80040000; /* enable, no prefetch */

	__raw_writel(htonl(ctl), &dev->uregs->outbound[i].otat);

	debug("Tsi148: window-addr =%p\n",
	&dev->uregs->outbound[i].otsau);
	debug("Tsi148: pci slave window[%d] attr =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->outbound[i].otat)));
	debug("Tsi148: pci slave window[%d] start =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->outbound[i].otsal)));
	debug("Tsi148: pci slave window[%d] end =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->outbound[i].oteal)));
	debug("Tsi148: pci slave window[%d] offset=%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->outbound[i].otofl)));

	return 0;

	exit_10:
	return -result;
	}

	unsigned int tsi148_eval_vam(int vam)
	{
	unsigned int ctl = 0;

	switch (vam & VME_AM_Axx) {
	case VME_AM_A16:
	ctl = 0x00000000;
	break;
	case VME_AM_A24:
	ctl = 0x00000010;
	break;
	case VME_AM_A32:
	ctl = 0x00000020;
	break;
	}
	switch (vam & VME_AM_Mxx) {
	case VME_AM_DATA:
	ctl \|= 0x00000001;
	break;
	case VME_AM_PROG:
	ctl \|= 0x00000002;
	break;
	case (VME_AM_PROG \| VME_AM_DATA):
	ctl \|= 0x00000003;
	break;
	}

	if (vam & VME_AM_SUP)
	ctl \|= 0x00000008;
	if (vam & VME_AM_USR)
	ctl \|= 0x00000004;

	return ctl;
	}

	/*
	* Create vme slave window (access: vme -> pci)
	*/
	int tsi148_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr,
	int size, int vam)
	{
	int result, i;
	unsigned int ctl = 0;

	if (NULL == dev) {
	result = -1;
	goto exit_10;
	}

	for (i = 0; i < 8; i++) {
	if (0x00000000 == readl(&dev->uregs->inbound[i].itat))
	break;
	}

	if (i > 7) {
	printf("Tsi148: No Image available\n");
	result = -1;
	goto exit_10;
	}

	debug("Tsi148: Using image %d\n", i);

	__raw_writel(htonl(vmeAddr), &dev->uregs->inbound[i].itsal);
	__raw_writel(0x00000000, &dev->uregs->inbound[i].itsau);
	__raw_writel(htonl(vmeAddr + size), &dev->uregs->inbound[i].iteal);
	__raw_writel(0x00000000, &dev->uregs->inbound[i].iteau);
	__raw_writel(htonl(pciAddr - vmeAddr), &dev->uregs->inbound[i].itofl);
	if (vmeAddr > pciAddr)
	__raw_writel(0xffffffff, &dev->uregs->inbound[i].itofu);
	else
	__raw_writel(0x00000000, &dev->uregs->inbound[i].itofu);

	ctl = tsi148_eval_vam(vam);
	ctl \|= 0x80000000; /* enable */
	__raw_writel(htonl(ctl), &dev->uregs->inbound[i].itat);

	debug("Tsi148: window-addr =%p\n",
	&dev->uregs->inbound[i].itsau);
	debug("Tsi148: vme slave window[%d] attr =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->inbound[i].itat)));
	debug("Tsi148: vme slave window[%d] start =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->inbound[i].itsal)));
	debug("Tsi148: vme slave window[%d] end =%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->inbound[i].iteal)));
	debug("Tsi148: vme slave window[%d] offset=%08x\n",
	i, ntohl(__raw_readl(&dev->uregs->inbound[i].itofl)));

	return 0;

	exit_10:
	return -result;
	}

	/*
	* Create vme slave window (access: vme -> gcsr)
	*/
	int tsi148_vme_gcsr_window(unsigned int vmeAddr, int vam)
	{
	int result;
	unsigned int ctl;

	result = 0;

	if (NULL == dev) {
	result = 1;
	} else {
	__raw_writel(htonl(vmeAddr), &dev->uregs->gbal);
	__raw_writel(0x00000000, &dev->uregs->gbau);

	ctl = tsi148_eval_vam(vam);
	ctl \|= 0x00000080; /* enable */
	__raw_writel(htonl(ctl), &dev->uregs->gcsrat);
	}

	return result;
	}

	/*
	* Create vme slave window (access: vme -> crcsr)
	*/
	int tsi148_vme_crcsr_window(unsigned int vmeAddr)
	{
	int result;
	unsigned int ctl;

	result = 0;

	if (NULL == dev) {
	result = 1;
	} else {
	__raw_writel(htonl(vmeAddr), &dev->uregs->crol);
	__raw_writel(0x00000000, &dev->uregs->crou);

	ctl = 0x00000080; /* enable */
	__raw_writel(htonl(ctl), &dev->uregs->crat);
	}

	return result;
	}

	/*
	* Create vme slave window (access: vme -> crg)
	*/
	int tsi148_vme_crg_window(unsigned int vmeAddr, int vam)
	{
	int result;
	unsigned int ctl;

	result = 0;

	if (NULL == dev) {
	result = 1;
	} else {
	__raw_writel(htonl(vmeAddr), &dev->uregs->cbal);
	__raw_writel(0x00000000, &dev->uregs->cbau);

	ctl = tsi148_eval_vam(vam);
	ctl \|= 0x00000080; /* enable */
	__raw_writel(htonl(ctl), &dev->uregs->crgat);
	}

	return result;
	}

	/*
	* Tundra Tsi148 configuration
	*/
	int do_tsi148(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, vdw = 0;
	char cmd = 'x';

	/* get parameter */
	if (argc > 1)
	cmd = argv[1][0];
	if (argc > 2)
	addr1 = simple_strtoul(argv[2], NULL, 16);
	if (argc > 3)
	addr2 = simple_strtoul(argv[3], NULL, 16);
	if (argc > 4)
	size = simple_strtoul(argv[4], NULL, 16);
	if (argc > 5)
	vam = simple_strtoul(argv[5], NULL, 16);
	if (argc > 6)
	vdw = simple_strtoul(argv[6], NULL, 16);

	switch (cmd) {
	case 'c':
	if (strcmp(argv[1], "crg") == 0) {
	vam = addr2;
	printf("Tsi148: Configuring VME CRG Window "
	"(VME->CRG):\n");
	printf(" vme=%08lx vam=%02lx\n", addr1, vam);
	tsi148_vme_crg_window(addr1, vam);
	} else {
	printf("Tsi148: Configuring VME CR/CSR Window "
	"(VME->CR/CSR):\n");
	printf(" pci=%08lx\n", addr1);
	tsi148_vme_crcsr_window(addr1);
	}
	break;
	case 'i': /* init */
	tsi148_init();
	break;
	case 'g':
	vam = addr2;
	printf("Tsi148: Configuring VME GCSR Window (VME->GCSR):\n");
	printf(" vme=%08lx vam=%02lx\n", addr1, vam);
	tsi148_vme_gcsr_window(addr1, vam);
	break;
	case 'v': /* vme */
	printf("Tsi148: Configuring VME Slave Window (VME->PCI):\n");
	printf(" vme=%08lx pci=%08lx size=%08lx vam=%02lx\n",
	addr1, addr2, size, vam);
	tsi148_vme_slave_window(addr1, addr2, size, vam);
	break;
	case 'p': /* pci */
	printf("Tsi148: Configuring PCI Slave Window (PCI->VME):\n");
	printf(" pci=%08lx vme=%08lx size=%08lx vam=%02lx vdw=%02lx\n",
	addr1, addr2, size, vam, vdw);
	tsi148_pci_slave_window(addr1, addr2, size, vam, vdw);
	break;
	default:
	printf("Tsi148: Command %s not supported!\n", argv[1]);
	}

	return 0;
	}

	U_BOOT_CMD(
	tsi148, 7, 1, do_tsi148,
	"initialize and configure Turndra Tsi148\n",
	"init\n"
	" - initialize tsi148\n"
	"tsi148 vme [vme_addr] [pci_addr] [size] [vam]\n"
	" - create vme slave window (access: vme->pci)\n"
	"tsi148 pci [pci_addr] [vme_addr] [size] [vam] [vdw]\n"
	" - create pci slave window (access: pci->vme)\n"
	"tsi148 crg [vme_addr] [vam]\n"
	" - create vme slave window: (access vme->CRG\n"
	"tsi148 crcsr [pci_addr]\n"
	" - create vme slave window: (access vme->CR/CSR\n"
	"tsi148 gcsr [vme_addr] [vam]\n"
	" - create vme slave window: (access vme->GCSR\n"
	" [vam] = VMEbus Address-Modifier: 01 -> A16 Address Space\n"
	" 02 -> A24 Address Space\n"
	" 03 -> A32 Address Space\n"
	" 04 -> Usr AM Code\n"
	" 08 -> Supervisor AM Code\n"
	" 10 -> Data AM Code\n"
	" 20 -> Program AM Code\n"
	" [vdw] = VMEbus Maximum Datawidth: 02 -> D16 Data Width\n"
	" 03 -> D32 Data Width\n"
	);