board/st/stm32f429-discovery/stm32f429-discovery.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2011, 2012, 2013
  * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
  * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
  * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
  * Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
  *
  * (C) Copyright 2015
  * Kamil Lulko, <kamil.lulko@gmail.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <asm/io.h>
 #include <asm/armv7m.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/fmc.h>
 #include <dm/platdata.h>
 #include <dm/platform_data/serial_stm32.h>
 #include <asm/arch/stm32_periph.h>
 #include <asm/arch/stm32_defs.h>

 DECLARE_GLOBAL_DATA_PTR;

 const struct stm32_gpio_ctl gpio_ctl_gpout = {
 	.mode = STM32_GPIO_MODE_OUT,
 	.otype = STM32_GPIO_OTYPE_PP,
 	.speed = STM32_GPIO_SPEED_50M,
 	.pupd = STM32_GPIO_PUPD_NO,
 	.af = STM32_GPIO_AF0
 };

 const struct stm32_gpio_ctl gpio_ctl_usart = {
 	.mode = STM32_GPIO_MODE_AF,
 	.otype = STM32_GPIO_OTYPE_PP,
 	.speed = STM32_GPIO_SPEED_50M,
 	.pupd = STM32_GPIO_PUPD_UP,
 	.af = STM32_GPIO_USART
 };

 static const struct stm32_gpio_dsc usart_gpio[] = {
 	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_TX},	/* TX */
 	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_RX},	/* RX */
 };

 int uart_setup_gpio(void)
 {
 	int i;
 	int rv = 0;

 	clock_setup(GPIO_A_CLOCK_CFG);
 	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
 		rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
 		if (rv)
 			goto out;
 	}

 out:
 	return rv;
 }

 const struct stm32_gpio_ctl gpio_ctl_fmc = {
 	.mode = STM32_GPIO_MODE_AF,
 	.otype = STM32_GPIO_OTYPE_PP,
 	.speed = STM32_GPIO_SPEED_100M,
 	.pupd = STM32_GPIO_PUPD_NO,
 	.af = STM32_GPIO_AF12
 };

 static const struct stm32_gpio_dsc ext_ram_fmc_gpio[] = {
 	/* Chip is LQFP144, see DM00077036.pdf for details */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_10},	/* 79, FMC_D15 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_9},	/* 78, FMC_D14 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_8},	/* 77, FMC_D13 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_15},	/* 68, FMC_D12 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_14},	/* 67, FMC_D11 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_13},	/* 66, FMC_D10 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_12},	/* 65, FMC_D9 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_11},	/* 64, FMC_D8 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_10},	/* 63, FMC_D7 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_9},	/* 60, FMC_D6 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_8},	/* 59, FMC_D5 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_7},	/* 58, FMC_D4 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_1},	/* 115, FMC_D3 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_0},	/* 114, FMC_D2 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_15},	/* 86, FMC_D1 */
 	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_14},	/* 85, FMC_D0 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_1},	/* 142, FMC_NBL1 */
 	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_0},	/* 141, FMC_NBL0 */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_5},	/* 90, FMC_A15, BA1 */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_4},	/* 89, FMC_A14, BA0 */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_1},	/* 57, FMC_A11 */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_0},	/* 56, FMC_A10 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_15},	/* 55, FMC_A9 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_14},	/* 54, FMC_A8 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_13},	/* 53, FMC_A7 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_12},	/* 50, FMC_A6 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_5},	/* 15, FMC_A5 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_4},	/* 14, FMC_A4 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_3},	/* 13, FMC_A3 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_2},	/* 12, FMC_A2 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_1},	/* 11, FMC_A1 */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_0},	/* 10, FMC_A0 */
 	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_6},	/* 136, SDRAM_NE */
 	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_11},	/* 49, SDRAM_NRAS */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_15},	/* 132, SDRAM_NCAS */
 	{STM32_GPIO_PORT_C, STM32_GPIO_PIN_0},	/* 26, SDRAM_NWE */
 	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_5},	/* 135, SDRAM_CKE */
 	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_8},	/* 93, SDRAM_CLK */
 };

 static int fmc_setup_gpio(void)
 {
 	int rv = 0;
 	int i;

 	clock_setup(GPIO_B_CLOCK_CFG);
 	clock_setup(GPIO_C_CLOCK_CFG);
 	clock_setup(GPIO_D_CLOCK_CFG);
 	clock_setup(GPIO_E_CLOCK_CFG);
 	clock_setup(GPIO_F_CLOCK_CFG);
 	clock_setup(GPIO_G_CLOCK_CFG);

 	for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) {
 		rv = stm32_gpio_config(&ext_ram_fmc_gpio[i],
 				&gpio_ctl_fmc);
 		if (rv)
 			goto out;
 	}

 out:
 	return rv;
 }

 /*
  * STM32 RCC FMC specific definitions
  */
 #define STM32_RCC_ENR_FMC	(1 << 0)	/* FMC module clock  */

 static inline u32 _ns2clk(u32 ns, u32 freq)
 {
 	u32 tmp = freq/1000000;
 	return (tmp * ns) / 1000;
 }

 #define NS2CLK(ns) (_ns2clk(ns, freq))

 /*
  * Following are timings for IS42S16400J, from corresponding datasheet
  */
 #define SDRAM_CAS	3	/* 3 cycles */
 #define SDRAM_NB	1	/* Number of banks */
 #define SDRAM_MWID	1	/* 16 bit memory */

 #define SDRAM_NR	0x1	/* 12-bit row */
 #define SDRAM_NC	0x0	/* 8-bit col */
 #define SDRAM_RBURST	0x1	/* Single read requests always as bursts */
 #define SDRAM_RPIPE	0x0	/* No HCLK clock cycle delay */

 #define SDRAM_TRRD	(NS2CLK(14) - 1)
 #define SDRAM_TRCD	(NS2CLK(15) - 1)
 #define SDRAM_TRP	(NS2CLK(15) - 1)
 #define SDRAM_TRAS	(NS2CLK(42) - 1)
 #define SDRAM_TRC	(NS2CLK(63) - 1)
 #define SDRAM_TRFC	(NS2CLK(63) - 1)
 #define SDRAM_TCDL	(1 - 1)
 #define SDRAM_TRDL	(2 - 1)
 #define SDRAM_TBDL	(1 - 1)
 #define SDRAM_TREF	1386
 #define SDRAM_TCCD	(1 - 1)

 #define SDRAM_TXSR	(NS2CLK(70) - 1)/* Row cycle time after precharge */
 #define SDRAM_TMRD	(3 - 1)		/* Page 10, Mode Register Set */

 /* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
 #define SDRAM_TWR	max(\
 	(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
 	(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
 )

 #define SDRAM_MODE_BL_SHIFT	0
 #define SDRAM_MODE_CAS_SHIFT	4
 #define SDRAM_MODE_BL		0
 #define SDRAM_MODE_CAS		SDRAM_CAS

 int dram_init(void)
 {
 	u32 freq;
 	int rv;

 	rv = fmc_setup_gpio();
 	if (rv)
 		return rv;

 	setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);

 	/*
 	 * Get frequency for NS2CLK calculation.
 	 */
 	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;

 	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
 		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
 		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
 		&STM32_SDRAM_FMC->sdcr1);

 	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
 		| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
 		| SDRAM_NB << FMC_SDCR_NB_SHIFT
 		| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
 		| SDRAM_NR << FMC_SDCR_NR_SHIFT
 		| SDRAM_NC << FMC_SDCR_NC_SHIFT
 		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
 		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
 		&STM32_SDRAM_FMC->sdcr2);

 	writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
 		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
 		&STM32_SDRAM_FMC->sdtr1);

 	writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
 		| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
 		| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
 		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
 		| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
 		| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
 		| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
 		&STM32_SDRAM_FMC->sdtr2);

 	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_START_CLOCK,
 	       &STM32_SDRAM_FMC->sdcmr);

 	udelay(200);	/* 200 us delay, page 10, "Power-Up" */
 	FMC_BUSY_WAIT();

 	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_PRECHARGE,
 	       &STM32_SDRAM_FMC->sdcmr);

 	udelay(100);
 	FMC_BUSY_WAIT();

 	writel((FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_AUTOREFRESH
 		| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);

 	udelay(100);
 	FMC_BUSY_WAIT();

 	writel(FMC_SDCMR_BANK_2 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
 		| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
 		<< FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
 		&STM32_SDRAM_FMC->sdcmr);

 	udelay(100);

 	FMC_BUSY_WAIT();

 	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_NORMAL,
 	       &STM32_SDRAM_FMC->sdcmr);

 	FMC_BUSY_WAIT();

 	/* Refresh timer */
 	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);

 	/*
 	 * Fill in global info with description of SRAM configuration
 	 */
 	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
 	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;

 	gd->ram_size = CONFIG_SYS_RAM_SIZE;

 	return rv;
 }

 static const struct stm32_serial_platdata serial_platdata = {
 	.base = (struct stm32_usart *)STM32_USART1_BASE,
 };

 U_BOOT_DEVICE(stm32_serials) = {
 	.name = "serial_stm32",
 	.platdata = &serial_platdata,
 };

 u32 get_board_rev(void)
 {
 	return 0;
 }

 int board_early_init_f(void)
 {
 	int res;

 	res = uart_setup_gpio();
 	if (res)
 		return res;
 	clock_setup(USART1_CLOCK_CFG);

 	return 0;
 }

 int board_init(void)
 {
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

 	return 0;
 }

 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
 	char serialno[25];
 	uint32_t u_id_low, u_id_mid, u_id_high;

 	if (!getenv("serial#")) {
 		u_id_low  = readl(&STM32_U_ID->u_id_low);
 		u_id_mid  = readl(&STM32_U_ID->u_id_mid);
 		u_id_high = readl(&STM32_U_ID->u_id_high);
 		sprintf(serialno, "%08x%08x%08x",
 			u_id_high, u_id_mid, u_id_low);
 		setenv("serial#", serialno);
 	}

 	return 0;
 }
 #endif
	/*
	* (C) Copyright 2011, 2012, 2013
	* Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
	* Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
	* Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
	* Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
	*
	* (C) Copyright 2015
	* Kamil Lulko, <kamil.lulko@gmail.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <asm/armv7m.h>
	#include <asm/arch/stm32.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/fmc.h>
	#include <dm/platdata.h>
	#include <dm/platform_data/serial_stm32.h>
	#include <asm/arch/stm32_periph.h>
	#include <asm/arch/stm32_defs.h>

	DECLARE_GLOBAL_DATA_PTR;

	const struct stm32_gpio_ctl gpio_ctl_gpout = {
	.mode = STM32_GPIO_MODE_OUT,
	.otype = STM32_GPIO_OTYPE_PP,
	.speed = STM32_GPIO_SPEED_50M,
	.pupd = STM32_GPIO_PUPD_NO,
	.af = STM32_GPIO_AF0
	};

	const struct stm32_gpio_ctl gpio_ctl_usart = {
	.mode = STM32_GPIO_MODE_AF,
	.otype = STM32_GPIO_OTYPE_PP,
	.speed = STM32_GPIO_SPEED_50M,
	.pupd = STM32_GPIO_PUPD_UP,
	.af = STM32_GPIO_USART
	};

	static const struct stm32_gpio_dsc usart_gpio[] = {
	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_TX}, /* TX */
	{STM32_GPIO_PORT_X, STM32_GPIO_PIN_RX}, /* RX */
	};

	int uart_setup_gpio(void)
	{
	int i;
	int rv = 0;

	clock_setup(GPIO_A_CLOCK_CFG);
	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
	rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
	if (rv)
	goto out;
	}

	out:
	return rv;
	}

	const struct stm32_gpio_ctl gpio_ctl_fmc = {
	.mode = STM32_GPIO_MODE_AF,
	.otype = STM32_GPIO_OTYPE_PP,
	.speed = STM32_GPIO_SPEED_100M,
	.pupd = STM32_GPIO_PUPD_NO,
	.af = STM32_GPIO_AF12
	};

	static const struct stm32_gpio_dsc ext_ram_fmc_gpio[] = {
	/* Chip is LQFP144, see DM00077036.pdf for details */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_10}, /* 79, FMC_D15 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_9}, /* 78, FMC_D14 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_8}, /* 77, FMC_D13 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_15}, /* 68, FMC_D12 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_14}, /* 67, FMC_D11 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_13}, /* 66, FMC_D10 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_12}, /* 65, FMC_D9 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_11}, /* 64, FMC_D8 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_10}, /* 63, FMC_D7 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_9}, /* 60, FMC_D6 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_8}, /* 59, FMC_D5 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_7}, /* 58, FMC_D4 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_1}, /* 115, FMC_D3 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_0}, /* 114, FMC_D2 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_15}, /* 86, FMC_D1 */
	{STM32_GPIO_PORT_D, STM32_GPIO_PIN_14}, /* 85, FMC_D0 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_1}, /* 142, FMC_NBL1 */
	{STM32_GPIO_PORT_E, STM32_GPIO_PIN_0}, /* 141, FMC_NBL0 */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_5}, /* 90, FMC_A15, BA1 */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_4}, /* 89, FMC_A14, BA0 */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_1}, /* 57, FMC_A11 */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_0}, /* 56, FMC_A10 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_15}, /* 55, FMC_A9 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_14}, /* 54, FMC_A8 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_13}, /* 53, FMC_A7 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_12}, /* 50, FMC_A6 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_5}, /* 15, FMC_A5 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_4}, /* 14, FMC_A4 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_3}, /* 13, FMC_A3 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_2}, /* 12, FMC_A2 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_1}, /* 11, FMC_A1 */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_0}, /* 10, FMC_A0 */
	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_6}, /* 136, SDRAM_NE */
	{STM32_GPIO_PORT_F, STM32_GPIO_PIN_11}, /* 49, SDRAM_NRAS */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_15}, /* 132, SDRAM_NCAS */
	{STM32_GPIO_PORT_C, STM32_GPIO_PIN_0}, /* 26, SDRAM_NWE */
	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_5}, /* 135, SDRAM_CKE */
	{STM32_GPIO_PORT_G, STM32_GPIO_PIN_8}, /* 93, SDRAM_CLK */
	};

	static int fmc_setup_gpio(void)
	{
	int rv = 0;
	int i;

	clock_setup(GPIO_B_CLOCK_CFG);
	clock_setup(GPIO_C_CLOCK_CFG);
	clock_setup(GPIO_D_CLOCK_CFG);
	clock_setup(GPIO_E_CLOCK_CFG);
	clock_setup(GPIO_F_CLOCK_CFG);
	clock_setup(GPIO_G_CLOCK_CFG);

	for (i = 0; i < ARRAY_SIZE(ext_ram_fmc_gpio); i++) {
	rv = stm32_gpio_config(&ext_ram_fmc_gpio[i],
	&gpio_ctl_fmc);
	if (rv)
	goto out;
	}

	out:
	return rv;
	}

	/*
	* STM32 RCC FMC specific definitions
	*/
	#define STM32_RCC_ENR_FMC (1 << 0) /* FMC module clock */

	static inline u32 _ns2clk(u32 ns, u32 freq)
	{
	u32 tmp = freq/1000000;
	return (tmp * ns) / 1000;
	}

	#define NS2CLK(ns) (_ns2clk(ns, freq))

	/*
	* Following are timings for IS42S16400J, from corresponding datasheet
	*/
	#define SDRAM_CAS 3 /* 3 cycles */
	#define SDRAM_NB 1 /* Number of banks */
	#define SDRAM_MWID 1 /* 16 bit memory */

	#define SDRAM_NR 0x1 /* 12-bit row */
	#define SDRAM_NC 0x0 /* 8-bit col */
	#define SDRAM_RBURST 0x1 /* Single read requests always as bursts */
	#define SDRAM_RPIPE 0x0 /* No HCLK clock cycle delay */

	#define SDRAM_TRRD (NS2CLK(14) - 1)
	#define SDRAM_TRCD (NS2CLK(15) - 1)
	#define SDRAM_TRP (NS2CLK(15) - 1)
	#define SDRAM_TRAS (NS2CLK(42) - 1)
	#define SDRAM_TRC (NS2CLK(63) - 1)
	#define SDRAM_TRFC (NS2CLK(63) - 1)
	#define SDRAM_TCDL (1 - 1)
	#define SDRAM_TRDL (2 - 1)
	#define SDRAM_TBDL (1 - 1)
	#define SDRAM_TREF 1386
	#define SDRAM_TCCD (1 - 1)

	#define SDRAM_TXSR (NS2CLK(70) - 1)/* Row cycle time after precharge */
	#define SDRAM_TMRD (3 - 1) /* Page 10, Mode Register Set */

	/* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
	#define SDRAM_TWR max(\
	(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
	(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
	)

	#define SDRAM_MODE_BL_SHIFT 0
	#define SDRAM_MODE_CAS_SHIFT 4
	#define SDRAM_MODE_BL 0
	#define SDRAM_MODE_CAS SDRAM_CAS

	int dram_init(void)
	{
	u32 freq;
	int rv;

	rv = fmc_setup_gpio();
	if (rv)
	return rv;

	setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);

	/*
	* Get frequency for NS2CLK calculation.
	*/
	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;

	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
	\| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
	\| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
	&STM32_SDRAM_FMC->sdcr1);

	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
	\| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
	\| SDRAM_NB << FMC_SDCR_NB_SHIFT
	\| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
	\| SDRAM_NR << FMC_SDCR_NR_SHIFT
	\| SDRAM_NC << FMC_SDCR_NC_SHIFT
	\| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
	\| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
	&STM32_SDRAM_FMC->sdcr2);

	writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
	\| SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
	&STM32_SDRAM_FMC->sdtr1);

	writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
	\| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
	\| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
	\| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
	\| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
	\| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
	\| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
	&STM32_SDRAM_FMC->sdtr2);

	writel(FMC_SDCMR_BANK_2 \| FMC_SDCMR_MODE_START_CLOCK,
	&STM32_SDRAM_FMC->sdcmr);

	udelay(200); /* 200 us delay, page 10, "Power-Up" */
	FMC_BUSY_WAIT();

	writel(FMC_SDCMR_BANK_2 \| FMC_SDCMR_MODE_PRECHARGE,
	&STM32_SDRAM_FMC->sdcmr);

	udelay(100);
	FMC_BUSY_WAIT();

	writel((FMC_SDCMR_BANK_2 \| FMC_SDCMR_MODE_AUTOREFRESH
	\| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);

	udelay(100);
	FMC_BUSY_WAIT();

	writel(FMC_SDCMR_BANK_2 \| (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
	\| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
	<< FMC_SDCMR_MODE_REGISTER_SHIFT \| FMC_SDCMR_MODE_WRITE_MODE,
	&STM32_SDRAM_FMC->sdcmr);

	udelay(100);

	FMC_BUSY_WAIT();

	writel(FMC_SDCMR_BANK_2 \| FMC_SDCMR_MODE_NORMAL,
	&STM32_SDRAM_FMC->sdcmr);

	FMC_BUSY_WAIT();

	/* Refresh timer */
	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);

	/*
	* Fill in global info with description of SRAM configuration
	*/
	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
	gd->bd->bi_dram[0].size = CONFIG_SYS_RAM_SIZE;

	gd->ram_size = CONFIG_SYS_RAM_SIZE;

	return rv;
	}

	static const struct stm32_serial_platdata serial_platdata = {
	.base = (struct stm32_usart *)STM32_USART1_BASE,
	};

	U_BOOT_DEVICE(stm32_serials) = {
	.name = "serial_stm32",
	.platdata = &serial_platdata,
	};

	u32 get_board_rev(void)
	{
	return 0;
	}

	int board_early_init_f(void)
	{
	int res;

	res = uart_setup_gpio();
	if (res)
	return res;
	clock_setup(USART1_CLOCK_CFG);

	return 0;
	}

	int board_init(void)
	{
	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

	return 0;
	}

	#ifdef CONFIG_MISC_INIT_R
	int misc_init_r(void)
	{
	char serialno[25];
	uint32_t u_id_low, u_id_mid, u_id_high;

	if (!getenv("serial#")) {
	u_id_low = readl(&STM32_U_ID->u_id_low);
	u_id_mid = readl(&STM32_U_ID->u_id_mid);
	u_id_high = readl(&STM32_U_ID->u_id_high);
	sprintf(serialno, "%08x%08x%08x",
	u_id_high, u_id_mid, u_id_low);
	setenv("serial#", serialno);
	}

	return 0;
	}
	#endif