| /* |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Authors: |
| * Aneesh V <aneesh@ti.com> |
| * |
| * Derived from OMAP3 work by |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _OMAP4_H_ |
| #define _OMAP4_H_ |
| |
| #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) |
| #include <asm/types.h> |
| #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ |
| |
| /* |
| * L4 Peripherals - L4 Wakeup and L4 Core now |
| */ |
| #define OMAP44XX_L4_CORE_BASE 0x4A000000 |
| #define OMAP44XX_L4_WKUP_BASE 0x4A300000 |
| #define OMAP44XX_L4_PER_BASE 0x48000000 |
| |
| #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 |
| #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 |
| |
| |
| /* CONTROL */ |
| #define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) |
| #define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) |
| #define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) |
| |
| /* UART */ |
| #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) |
| #define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) |
| #define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) |
| |
| /* General Purpose Timers */ |
| #define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) |
| #define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) |
| #define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) |
| |
| /* Watchdog Timer2 - MPU watchdog */ |
| #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) |
| |
| /* 32KTIMER */ |
| #define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000) |
| |
| /* GPMC */ |
| #define OMAP44XX_GPMC_BASE 0x50000000 |
| |
| /* DMM */ |
| #define OMAP44XX_DMM_BASE 0x4E000000 |
| #define DMM_LISA_MAP_BASE (OMAP44XX_DMM_BASE + 0x40) |
| #define DMM_LISA_MAP_SYS_SIZE_MASK (7 << 20) |
| #define DMM_LISA_MAP_SYS_SIZE_SHIFT 20 |
| #define DMM_LISA_MAP_SYS_ADDR_MASK (0xFF << 24) |
| /* |
| * Hardware Register Details |
| */ |
| |
| /* Watchdog Timer */ |
| #define WD_UNLOCK1 0xAAAA |
| #define WD_UNLOCK2 0x5555 |
| |
| /* GP Timer */ |
| #define TCLR_ST (0x1 << 0) |
| #define TCLR_AR (0x1 << 1) |
| #define TCLR_PRE (0x1 << 5) |
| |
| /* |
| * PRCM |
| */ |
| |
| /* PRM */ |
| #define PRM_BASE 0x4A306000 |
| #define PRM_DEVICE_BASE (PRM_BASE + 0x1B00) |
| |
| #define PRM_RSTCTRL PRM_DEVICE_BASE |
| #define PRM_RSTCTRL_RESET 0x01 |
| |
| #ifndef __ASSEMBLY__ |
| |
| struct s32ktimer { |
| unsigned char res[0x10]; |
| unsigned int s32k_cr; /* 0x10 */ |
| }; |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| /* |
| * Non-secure SRAM Addresses |
| * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE |
| * at 0x40304000(EMU base) so that our code works for both EMU and GP |
| */ |
| #define NON_SECURE_SRAM_START 0x40304000 |
| #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ |
| /* base address for indirect vectors (internal boot mode) */ |
| #define SRAM_ROM_VECT_BASE 0x4030D000 |
| /* Temporary SRAM stack used while low level init is done */ |
| #define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END |
| |
| /* |
| * OMAP4 real hardware: |
| * TODO: Change this to the IDCODE in the hw regsiter |
| */ |
| #define CPU_OMAP4430_ES10 1 |
| #define CPU_OMAP4430_ES20 2 |
| |
| #endif |