include/configs/ixdpg425.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2003
  * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl
  *
  * Configuation settings for the IXDPG425 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */
 #define CONFIG_IXP425           1       /* This is an IXP425 CPU	*/
 #define CONFIG_IXDPG425         1       /* on an IXDPG425 Board		*/

 #define CONFIG_DISPLAY_CPUINFO	1	/* display cpu info (and speed)	*/
 #define CONFIG_DISPLAY_BOARDINFO 1	/* display board info		*/

 /*
  * Ethernet
  */
 #define CONFIG_IXP4XX_NPE	1	/* include IXP4xx NPE support	*/
 #define CONFIG_NET_MULTI	1
 #define	CONFIG_PHY_ADDR		5	/* NPE0 PHY address		*/
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	4	/* NPE1 PHY address		*/
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_SYS_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */

 /*
  * Misc configuration options
  */

 #define CONFIG_BOOTCOUNT_LIMIT		/* support for bootcount limit	*/
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x60003000 /* inside qmrg sram		*/

 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(256 << 10)

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_IXP_SERIAL
 #define CONFIG_BAUDRATE         115200
 #define CONFIG_SYS_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING


 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 #define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */

 #define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */

 #define CONFIG_IXP425_TIMER_CLK		66666666
 #define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 ms ticks */

 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }

 /*
  * Stack sizes
  *
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 #ifdef CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 #endif

 /***************************************************************
  * Platform/Board specific defines start here.
  ***************************************************************/

 /*-----------------------------------------------------------------------
  * Default configuration (environment varibles...)
  *----------------------------------------------------------------------*/
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"

 #undef	CONFIG_BOOTARGS

 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=ixdpg425\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 	"flash_nfs=run nfsargs addip addtty;"				\
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 	        "bootm\0"						\
 	"rootpath=/opt/eldk/arm\0"					\
 	"bootfile=/tftpboot/ixdpg425/uImage\0"				\
 	"kernel_addr=50080000\0"					\
 	"ramdisk_addr=50200000\0"					\
 	"load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0"		\
 	"update=protect off 50000000 5003ffff;era 50000000 5003ffff;"	\
 		"cp.b 100000 50000000 40000;"			        \
 		"setenv filesize;saveenv\0"				\
 	"upd=run load update\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run net_nfs"

 /*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
 #define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */

 #define CONFIG_SYS_TEXT_BASE	0x50000000

 #define PHYS_FLASH_1            0x50000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE         0x01000000 /* 16 MB */
 #define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
 #define PHYS_FLASH_SECT_SIZE    0x00020000 /* 128 KB sectors (x1) */

 #define CONFIG_SYS_DRAM_BASE           0x00000000
 #define CONFIG_SYS_DRAM_SIZE           0x01000000

 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/

 /*
  * Expansion bus settings
  */
 #define CONFIG_SYS_EXP_CS0		0xbcd23c42

 /*
  * SDRAM settings
  */
 #define CONFIG_SYS_SDR_CONFIG		0x18
 #define CONFIG_SYS_SDR_MODE_CONFIG	0x1
 #define CONFIG_SYS_SDRAM_REFRESH_CNT	0x81a

 /*
  * FLASH and environment organization
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 #define CONFIG_SYS_MAX_FLASH_SECT      128	/* max number of sectors on one chip    */

 #define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 #define	CONFIG_ENV_IS_IN_FLASH	1

 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
 #define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection		*/

 #define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1 }

 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT	/* no byte writes on IXP4xx	*/

 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

 #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

 #define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
 #define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x40000)
 #define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/

 /* Address and size of Redundant Environment Sector	*/
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

 /*
  * GPIO settings
  */
 #define CONFIG_SYS_GPIO_PCI_INTA_N	6
 #define CONFIG_SYS_GPIO_PCI_INTB_N	7
 #define CONFIG_SYS_GPIO_SWITCH_RESET_N	8
 #define CONFIG_SYS_GPIO_SLIC_RESET_N	13
 #define CONFIG_SYS_GPIO_PCI_CLK	14
 #define CONFIG_SYS_GPIO_EXTBUS_CLK	15

 /*
  * Cache Configuration
  */
 #define CONFIG_SYS_CACHELINE_SIZE	32

 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE 0
 #define CONFIG_SYS_INIT_SP_ADDR						\
 	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

 #endif  /* __CONFIG_H */
	/*
	* (C) Copyright 2005-2006
	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	*
	* (C) Copyright 2003
	* Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl
	*
	* Configuation settings for the IXDPG425 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/
	#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
	#define CONFIG_IXDPG425 1 /* on an IXDPG425 Board */

	#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
	#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */

	/*
	* Ethernet
	*/
	#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */
	#define CONFIG_NET_MULTI 1
	#define CONFIG_PHY_ADDR 5 /* NPE0 PHY address */
	#define CONFIG_HAS_ETH1
	#define CONFIG_PHY1_ADDR 4 /* NPE1 PHY address */
	#define CONFIG_MII 1 /* MII PHY management */
	#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */

	/*
	* Misc configuration options
	*/

	#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */
	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */

	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (256 << 10)

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_IXP_SERIAL
	#define CONFIG_BAUDRATE 115200
	#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_ELF
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING


	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
	#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */

	#define CONFIG_IXP425_TIMER_CLK 66666666
	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	/* valid baudrates */
	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Stack sizes
	*
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (1281024) / regular stack */
	#ifdef CONFIG_USE_IRQ
	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	#endif

	/***************************************************************
	* Platform/Board specific defines start here.
	***************************************************************/

	/*-----------------------------------------------------------------------
	* Default configuration (environment varibles...)
	----------------------------------------------------------------------/
	#define CONFIG_PREBOOT "echo;" \
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

	#undef CONFIG_BOOTARGS

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"hostname=ixdpg425\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
	"flash_nfs=run nfsargs addip addtty;" \
	"bootm ${kernel_addr}\0" \
	"flash_self=run ramargs addip addtty;" \
	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
	"bootm\0" \
	"rootpath=/opt/eldk/arm\0" \
	"bootfile=/tftpboot/ixdpg425/uImage\0" \
	"kernel_addr=50080000\0" \
	"ramdisk_addr=50200000\0" \
	"load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0" \
	"update=protect off 50000000 5003ffff;era 50000000 5003ffff;" \
	"cp.b 100000 50000000 40000;" \
	"setenv filesize;saveenv\0" \
	"upd=run load update\0" \
	""
	#define CONFIG_BOOTCOMMAND "run net_nfs"

	/*
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
	#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
	#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */

	#define CONFIG_SYS_TEXT_BASE 0x50000000

	#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
	#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
	#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
	#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */

	#define CONFIG_SYS_DRAM_BASE 0x00000000
	#define CONFIG_SYS_DRAM_SIZE 0x01000000

	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */

	/*
	* Expansion bus settings
	*/
	#define CONFIG_SYS_EXP_CS0 0xbcd23c42

	/*
	* SDRAM settings
	*/
	#define CONFIG_SYS_SDR_CONFIG 0x18
	#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
	#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a

	/*
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */

	#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
	#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
	#define CONFIG_ENV_IS_IN_FLASH 1

	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
	#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */

	#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }

	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */

	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */

	#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
	#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */

	/* Address and size of Redundant Environment Sector */
	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)

	/*
	* GPIO settings
	*/
	#define CONFIG_SYS_GPIO_PCI_INTA_N 6
	#define CONFIG_SYS_GPIO_PCI_INTB_N 7
	#define CONFIG_SYS_GPIO_SWITCH_RESET_N 8
	#define CONFIG_SYS_GPIO_SLIC_RESET_N 13
	#define CONFIG_SYS_GPIO_PCI_CLK 14
	#define CONFIG_SYS_GPIO_EXTBUS_CLK 15

	/*
	* Cache Configuration
	*/
	#define CONFIG_SYS_CACHELINE_SIZE 32

	/* additions for new relocation code, must be added to all boards */
	#define CONFIG_SYS_SDRAM_BASE 0
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

	#endif /* __CONFIG_H */