drivers/power/pmic/pmic_tps65090.c - github/trini/u-boot - Gitiles

 /*
  * Copyright (c) 2012 The Chromium OS Authors.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <i2c.h>
 #include <power/pmic.h>
 #include <power/tps65090_pmic.h>

 DECLARE_GLOBAL_DATA_PTR;

 #define TPS65090_NAME "TPS65090_PMIC"

 /* TPS65090 register addresses */
 enum {
 	REG_IRQ1 = 0,
 	REG_CG_CTRL0 = 4,
 	REG_CG_STATUS1 = 0xa,
 	REG_FET1_CTRL = 0x0f,
 	REG_FET2_CTRL,
 	REG_FET3_CTRL,
 	REG_FET4_CTRL,
 	REG_FET5_CTRL,
 	REG_FET6_CTRL,
 	REG_FET7_CTRL,
 	TPS65090_NUM_REGS,
 };

 enum {
 	IRQ1_VBATG = 1 << 3,
 	CG_CTRL0_ENC_MASK	= 0x01,

 	MAX_FET_NUM	= 7,
 	MAX_CTRL_READ_TRIES = 5,

 	/* TPS65090 FET_CTRL register values */
 	FET_CTRL_TOFET		= 1 << 7,  /* Timeout, startup, overload */
 	FET_CTRL_PGFET		= 1 << 4,  /* Power good for FET status */
 	FET_CTRL_WAIT		= 3 << 2,  /* Overcurrent timeout max */
 	FET_CTRL_ADENFET	= 1 << 1,  /* Enable output auto discharge */
 	FET_CTRL_ENFET		= 1 << 0,  /* Enable FET */
 };

 /**
  * Checks for a valid FET number
  *
  * @param fet_id	FET number to check
  * @return 0 if ok, -EINVAL if FET value is out of range
  */
 static int tps65090_check_fet(unsigned int fet_id)
 {
 	if (fet_id == 0 || fet_id > MAX_FET_NUM) {
 		debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
 		      fet_id, MAX_FET_NUM);
 		return -EINVAL;
 	}

 	return 0;
 }

 /**
  * Set the power state for a FET
  *
  * @param pmic		pmic structure for the tps65090
  * @param fet_id	Fet number to set (1..MAX_FET_NUM)
  * @param set		1 to power on FET, 0 to power off
  * @return -EIO if we got a comms error, -EAGAIN if the FET failed to
  * change state. If all is ok, returns 0.
  */
 static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
 {
 	int retry;
 	u32 reg, value;

 	value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
 	if (set)
 		value |= FET_CTRL_ENFET;

 	if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
 		return -EIO;

 	/* Try reading until we get a result */
 	for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
 		if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg))
 			return -EIO;

 		/* Check that the fet went into the expected state */
 		if (!!(reg & FET_CTRL_PGFET) == set)
 			return 0;

 		/* If we got a timeout, there is no point in waiting longer */
 		if (reg & FET_CTRL_TOFET)
 			break;

 		mdelay(1);
 	}

 	debug("FET %d: Power good should have set to %d but reg=%#02x\n",
 	      fet_id, set, reg);
 	return -EAGAIN;
 }

 int tps65090_fet_enable(unsigned int fet_id)
 {
 	struct pmic *pmic;
 	ulong start;
 	int loops;
 	int ret;

 	ret = tps65090_check_fet(fet_id);
 	if (ret)
 		return ret;

 	pmic = pmic_get(TPS65090_NAME);
 	if (!pmic)
 		return -EACCES;

 	start = get_timer(0);
 	for (loops = 0;; loops++) {
 		ret = tps65090_fet_set(pmic, fet_id, true);
 		if (!ret)
 			break;

 		if (get_timer(start) > 100)
 			break;

 		/* Turn it off and try again until we time out */
 		tps65090_fet_set(pmic, fet_id, false);
 	}

 	if (ret)
 		debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
 		      __func__, fet_id, get_timer(start), loops);
 	else if (loops)
 		debug("%s: FET%d powered on after %lums, loops=%d\n",
 		      __func__, fet_id, get_timer(start), loops);

 	/*
 	 * Unfortunately, there are some conditions where the power
 	 * good bit will be 0, but the fet still comes up. One such
 	 * case occurs with the lcd backlight. We'll just return 0 here
 	 * and assume that the fet will eventually come up.
 	 */
 	if (ret == -EAGAIN)
 		ret = 0;

 	return ret;
 }

 int tps65090_fet_disable(unsigned int fet_id)
 {
 	struct pmic *pmic;
 	int ret;

 	ret = tps65090_check_fet(fet_id);
 	if (ret)
 		return ret;

 	pmic = pmic_get(TPS65090_NAME);
 	if (!pmic)
 		return -EACCES;
 	ret = tps65090_fet_set(pmic, fet_id, false);

 	return ret;
 }

 int tps65090_fet_is_enabled(unsigned int fet_id)
 {
 	struct pmic *pmic;
 	u32 reg;
 	int ret;

 	ret = tps65090_check_fet(fet_id);
 	if (ret)
 		return ret;

 	pmic = pmic_get(TPS65090_NAME);
 	if (!pmic)
 		return -ENODEV;
 	ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg);
 	if (ret) {
 		debug("fail to read FET%u_CTRL register over I2C", fet_id);
 		return -EIO;
 	}

 	return reg & FET_CTRL_ENFET;
 }

 int tps65090_get_charging(void)
 {
 	struct pmic *pmic;
 	u32 val;
 	int ret;

 	pmic = pmic_get(TPS65090_NAME);
 	if (!pmic)
 		return -EACCES;

 	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
 	if (ret)
 		return ret;

 	return !!(val & CG_CTRL0_ENC_MASK);
 }

 static int tps65090_charger_state(struct pmic *pmic, int state,
 				  int current)
 {
 	u32 val;
 	int ret;

 	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
 	if (!ret) {
 		if (state == PMIC_CHARGER_ENABLE)
 			val |= CG_CTRL0_ENC_MASK;
 		else
 			val &= ~CG_CTRL0_ENC_MASK;
 		ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
 	}
 	if (ret) {
 		debug("%s: Failed to read/write register\n", __func__);
 		return ret;
 	}

 	return 0;
 }

 int tps65090_get_status(void)
 {
 	struct pmic *pmic;
 	u32 val;
 	int ret;

 	pmic = pmic_get(TPS65090_NAME);
 	if (!pmic)
 		return -EACCES;

 	ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
 	if (ret)
 		return ret;

 	return val;
 }

 static int tps65090_charger_bat_present(struct pmic *pmic)
 {
 	u32 val;
 	int ret;

 	ret = pmic_reg_read(pmic, REG_IRQ1, &val);
 	if (ret)
 		return ret;

 	return !!(val & IRQ1_VBATG);
 }

 static struct power_chrg power_chrg_pmic_ops = {
 	.chrg_bat_present = tps65090_charger_bat_present,
 	.chrg_state = tps65090_charger_state,
 };

 int tps65090_init(void)
 {
 	struct pmic *p;
 	int bus;
 	int addr;
 	const void *blob = gd->fdt_blob;
 	int node, parent;

 	node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
 	if (node < 0) {
 		debug("PMIC: No node for PMIC Chip in device tree\n");
 		debug("node = %d\n", node);
 		return -ENODEV;
 	}

 	parent = fdt_parent_offset(blob, node);
 	if (parent < 0) {
 		debug("%s: Cannot find node parent\n", __func__);
 		return -EINVAL;
 	}

 	bus = i2c_get_bus_num_fdt(parent);
 	if (bus < 0) {
 		debug("%s: Cannot find I2C bus\n", __func__);
 		return -ENOENT;
 	}
 	addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
 	p = pmic_alloc();
 	if (!p) {
 		printf("%s: POWER allocation error!\n", __func__);
 		return -ENOMEM;
 	}

 	p->name = TPS65090_NAME;
 	p->bus = bus;
 	p->interface = PMIC_I2C;
 	p->number_of_regs = TPS65090_NUM_REGS;
 	p->hw.i2c.addr = addr;
 	p->hw.i2c.tx_num = 1;
 	p->chrg = &power_chrg_pmic_ops;

 	puts("TPS65090 PMIC init\n");

 	return 0;
 }
	/*
	* Copyright (c) 2012 The Chromium OS Authors.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <errno.h>
	#include <fdtdec.h>
	#include <i2c.h>
	#include <power/pmic.h>
	#include <power/tps65090_pmic.h>

	DECLARE_GLOBAL_DATA_PTR;

	#define TPS65090_NAME "TPS65090_PMIC"

	/* TPS65090 register addresses */
	enum {
	REG_IRQ1 = 0,
	REG_CG_CTRL0 = 4,
	REG_CG_STATUS1 = 0xa,
	REG_FET1_CTRL = 0x0f,
	REG_FET2_CTRL,
	REG_FET3_CTRL,
	REG_FET4_CTRL,
	REG_FET5_CTRL,
	REG_FET6_CTRL,
	REG_FET7_CTRL,
	TPS65090_NUM_REGS,
	};

	enum {
	IRQ1_VBATG = 1 << 3,
	CG_CTRL0_ENC_MASK = 0x01,

	MAX_FET_NUM = 7,
	MAX_CTRL_READ_TRIES = 5,

	/* TPS65090 FET_CTRL register values */
	FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
	FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
	FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
	FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
	FET_CTRL_ENFET = 1 << 0, /* Enable FET */
	};

	/**
	* Checks for a valid FET number
	*
	* @param fet_id FET number to check
	* @return 0 if ok, -EINVAL if FET value is out of range
	*/
	static int tps65090_check_fet(unsigned int fet_id)
	{
	if (fet_id == 0 \|\| fet_id > MAX_FET_NUM) {
	debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
	fet_id, MAX_FET_NUM);
	return -EINVAL;
	}

	return 0;
	}

	/**
	* Set the power state for a FET
	*
	* @param pmic pmic structure for the tps65090
	* @param fet_id Fet number to set (1..MAX_FET_NUM)
	* @param set 1 to power on FET, 0 to power off
	* @return -EIO if we got a comms error, -EAGAIN if the FET failed to
	* change state. If all is ok, returns 0.
	*/
	static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
	{
	int retry;
	u32 reg, value;

	value = FET_CTRL_ADENFET \| FET_CTRL_WAIT;
	if (set)
	value \|= FET_CTRL_ENFET;

	if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
	return -EIO;

	/* Try reading until we get a result */
	for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
	if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg))
	return -EIO;

	/* Check that the fet went into the expected state */
	if (!!(reg & FET_CTRL_PGFET) == set)
	return 0;

	/* If we got a timeout, there is no point in waiting longer */
	if (reg & FET_CTRL_TOFET)
	break;

	mdelay(1);
	}

	debug("FET %d: Power good should have set to %d but reg=%#02x\n",
	fet_id, set, reg);
	return -EAGAIN;
	}

	int tps65090_fet_enable(unsigned int fet_id)
	{
	struct pmic *pmic;
	ulong start;
	int loops;
	int ret;

	ret = tps65090_check_fet(fet_id);
	if (ret)
	return ret;

	pmic = pmic_get(TPS65090_NAME);
	if (!pmic)
	return -EACCES;

	start = get_timer(0);
	for (loops = 0;; loops++) {
	ret = tps65090_fet_set(pmic, fet_id, true);
	if (!ret)
	break;

	if (get_timer(start) > 100)
	break;

	/* Turn it off and try again until we time out */
	tps65090_fet_set(pmic, fet_id, false);
	}

	if (ret)
	debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
	__func__, fet_id, get_timer(start), loops);
	else if (loops)
	debug("%s: FET%d powered on after %lums, loops=%d\n",
	__func__, fet_id, get_timer(start), loops);

	/*
	* Unfortunately, there are some conditions where the power
	* good bit will be 0, but the fet still comes up. One such
	* case occurs with the lcd backlight. We'll just return 0 here
	* and assume that the fet will eventually come up.
	*/
	if (ret == -EAGAIN)
	ret = 0;

	return ret;
	}

	int tps65090_fet_disable(unsigned int fet_id)
	{
	struct pmic *pmic;
	int ret;

	ret = tps65090_check_fet(fet_id);
	if (ret)
	return ret;

	pmic = pmic_get(TPS65090_NAME);
	if (!pmic)
	return -EACCES;
	ret = tps65090_fet_set(pmic, fet_id, false);

	return ret;
	}

	int tps65090_fet_is_enabled(unsigned int fet_id)
	{
	struct pmic *pmic;
	u32 reg;
	int ret;

	ret = tps65090_check_fet(fet_id);
	if (ret)
	return ret;

	pmic = pmic_get(TPS65090_NAME);
	if (!pmic)
	return -ENODEV;
	ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg);
	if (ret) {
	debug("fail to read FET%u_CTRL register over I2C", fet_id);
	return -EIO;
	}

	return reg & FET_CTRL_ENFET;
	}

	int tps65090_get_charging(void)
	{
	struct pmic *pmic;
	u32 val;
	int ret;

	pmic = pmic_get(TPS65090_NAME);
	if (!pmic)
	return -EACCES;

	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
	if (ret)
	return ret;

	return !!(val & CG_CTRL0_ENC_MASK);
	}

	static int tps65090_charger_state(struct pmic *pmic, int state,
	int current)
	{
	u32 val;
	int ret;

	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
	if (!ret) {
	if (state == PMIC_CHARGER_ENABLE)
	val \|= CG_CTRL0_ENC_MASK;
	else
	val &= ~CG_CTRL0_ENC_MASK;
	ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
	}
	if (ret) {
	debug("%s: Failed to read/write register\n", __func__);
	return ret;
	}

	return 0;
	}

	int tps65090_get_status(void)
	{
	struct pmic *pmic;
	u32 val;
	int ret;

	pmic = pmic_get(TPS65090_NAME);
	if (!pmic)
	return -EACCES;

	ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
	if (ret)
	return ret;

	return val;
	}

	static int tps65090_charger_bat_present(struct pmic *pmic)
	{
	u32 val;
	int ret;

	ret = pmic_reg_read(pmic, REG_IRQ1, &val);
	if (ret)
	return ret;

	return !!(val & IRQ1_VBATG);
	}

	static struct power_chrg power_chrg_pmic_ops = {
	.chrg_bat_present = tps65090_charger_bat_present,
	.chrg_state = tps65090_charger_state,
	};

	int tps65090_init(void)
	{
	struct pmic *p;
	int bus;
	int addr;
	const void *blob = gd->fdt_blob;
	int node, parent;

	node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
	if (node < 0) {
	debug("PMIC: No node for PMIC Chip in device tree\n");
	debug("node = %d\n", node);
	return -ENODEV;
	}

	parent = fdt_parent_offset(blob, node);
	if (parent < 0) {
	debug("%s: Cannot find node parent\n", __func__);
	return -EINVAL;
	}

	bus = i2c_get_bus_num_fdt(parent);
	if (bus < 0) {
	debug("%s: Cannot find I2C bus\n", __func__);
	return -ENOENT;
	}
	addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
	p = pmic_alloc();
	if (!p) {
	printf("%s: POWER allocation error!\n", __func__);
	return -ENOMEM;
	}

	p->name = TPS65090_NAME;
	p->bus = bus;
	p->interface = PMIC_I2C;
	p->number_of_regs = TPS65090_NUM_REGS;
	p->hw.i2c.addr = addr;
	p->hw.i2c.tx_num = 1;
	p->chrg = &power_chrg_pmic_ops;

	puts("TPS65090 PMIC init\n");

	return 0;
	}